Conventional techniques for laser cooling, by coherent scattering off of internal states or through an optical cavity mode, have so far proved inefficient on mechanical oscillators heavier than a few nanograms. That is because larger oscillators vibrate at frequencies much too small compared to the scattering rates achievable by their coupling to auxiliary modes. Decoherence mechanisms typically observed in heavy low frequency elastically suspended oscillators also differ markedly from what is assumed in conventional treatments of laser cooling. We show that for a low-frequency anelastic oscillator forming the mechanically compliant end-mirror of a cavity, detuned optical readout, together with measurement-based feedback to stiffen and dampen it, can harness ponderomotively generated quantum correlations, to realize efficient cooling to the motional ground state. This will pave the way for experiments that call for milligram-scale mechanical oscillators prepared in pure motional states, for example, for tests of gravity's effect on massive quantum systems.
We discuss how the optomechanical coupling provided by radiation pressure can be used to cool macroscopic collective degrees of freedom, as vibrational modes of movable mirrors. Cooling is achieved using a phase-sensitive feedback-loop which effectively overdamps the mirrors motion without increasing the thermal noise. Feedback results able to bring macroscopic objects down to the quantum limit. In particular, it is possible to achieve squeezing and entanglement.
We propose a simple optomechanical model in which a mechanical oscillator quadrature could be "cooled" well below its equilibrium temperature by applying a suitable feedback to drive the orthogonal quadrature by means of the homodyne current of the radiation field used to probe its position.
Optomechanical coupling between a light field and the motion of a cavity mirror via radiation pressure plays an important role for the exploration of macroscopic quantum physics and for the detection of gravitational waves (GWs). It has been used to cool mechanical oscillators into their quantum ground states and has been considered to boost the sensitivity of GW detectors, e.g. via the optical spring effect. Here, we present the experimental characterization of generalized, that is, dispersive and dissipative optomechanical coupling, with a macroscopic (1.5mm)^2-sized silicon nitride (SiN) me…
Quantum ground-state cooling of macroscopic mechanical resonators is of essential importance to both fundamental physics and applied science. Conventional method of laser cooling is limited by the quantum backaction, which requires mechanical sideband resolved in order to cool to ground state. This work presents an idea to break the quantum backaction limit by engineering intracavity optical squeezing. It gives rise to quantum interference for all the dissipation channels, and under certain circumstances can totally remove the influence of the cavity dissipation and the resultant quantum backa…
The building blocks of Nature, namely atoms and elementary particles, are described by quantum mechanics. This fundamental theory is the ground on which physicists have built their major mathematical models [1]. Today, the unique features of quantum objects have led to the advent of promising quantum technologies [2, 3]. However, the macroscopic world is manifestly classical, and the nature of the quantum-to-classical crossover remains one of the most challenging open question of Science to date. In this respect, moving objects play a specific role [4, 5]. Pioneering experiments over the last …
We present a novel proposal for generating quantum superpositions of macroscopically distinct states of a bulk mechanical oscillator, compatible with existing optomechanical devices operating in the readily achievable bad-cavity limit. The scheme is based on a pulsed cavity optomechanical quantum non-demolition (QND) interaction, driven by displaced non-Gaussian states, and measurement-induced feedback, avoiding the need for strong single-photon optomechanical coupling. Furthermore, we show that single-quadrature cooling of the mechanical oscillator is sufficient for efficient state preparatio…
I discuss the robustness of the pumped cavity dynamics against phase diffusion of the laser and conclude that opto-mechanical cooling has extreme sensitivity compared to laser cooling of atoms. Certain proposals of ground state opto-mechanical cooling by single cavity would require an unrealistic sharp laser linewidth or equivalently, a very low level of phase noise. A systematic way to cancel classical excess phase noise is the interferometric twin-cavity pumping, initiated for optically trapped macro-mirrors of future gravitational-wave detectors.
Efficient cooling of trapped charged particles is essential to many fundamental physics experiments, to high-precision metrology, and to quantum technology. Until now, sympathetic cooling has required close-range Coulomb interactions, but there has been a sustained desire to bring laser-cooling techniques to particles in macroscopically separated traps, extending quantum control techniques to previously inaccessible particles such as highly charged ions, molecular ions and antimatter. Here we demonstrate sympathetic cooling of a single proton using laser-cooled Be+ ions in spatially separated …
We demonstrate the optomechanical cooling of a tapered optical nanofiber by coupling the polarization of light to the mechanical angular momentum of the system. The coupling is enabled by birefringence in the fiber and does not make use of an optical resonator. We find evidence for cooling in the distribution of thermally driven amplitude fluctuations and the noise spectrum of the torsional modes. Our proof-of-principle demonstration shows cavity-less cooling of the torsional degree of freedom of a macroscopically extended nanofiber.
Cooling of mesoscopic mechanical resonators represents a primary concern in cavity optomechanics. Here in the strong optomechanical coupling regime, we propose to dynamically control the cavity dissipation, which is able to significantly accelerate the cooling process while strongly suppressing the heating noise. Furthermore, the dynamic control is capable of overcoming quantum backaction and reducing the cooling limit by several orders of magnitude. The dynamic dissipation control provides new insights for tailoring the optomechanical interaction and offers the prospect of exploring macroscop…
Cooling the motion of a massive mechanical oscillator into its quantum ground state plays an essential role in observing macroscopic quantum effects in mechanical systems. Here we propose a measurement-based feedback cooling protocol in cavity magnomechanics that is able to cool the mechanical vibration mode of a macroscopic ferromagnet into its ground state. The mechanical mode couples to a magnon mode via a dispersive magnetostrictive interaction, and the latter further couples to a microwave cavity mode via the magnetic-dipole interaction. A feedback loop is introduced by measuring the ampl…
Ground state cooling of massive mechanical objects remains a difficult task restricted by the unresolved mechanical sidebands. We propose an optomechanically-induced-transparency cooling scheme to achieve ground state cooling of mechanical motion without the resolved sideband condition in a pure optomechanical system with two mechanical modes coupled to the same optical cavity mode. We show that ground state cooling is achievable for sideband resolution $ω_{m}/κ$ as low as 0.003. This provides a new route for quantum manipulation of massive macroscopic devices and high-precision measurements.
Ground state cooling of mechanical resonator is a way to generate macroscopic quantum states. Here we present a study of optomechanical cooling under the drive of square pulses without smooth profile. By illustrating the dynamical processes of cooling, we show how to choose the amplitudes and durations of square pulses, as well as the intervals between them, so that a mechanical resonator can be quickly cooled down to its ground state. Compared with the cooling under a continuous-wave drive field, the ground state cooling of a mechanical resonator can be performed more efficiently and flexibly…
The efficient cooling of the nanomechanical resonators is essential to exploration of quantum properties of the macroscopic or mesoscopic systems. We propose such a laser-cooling scheme for a nanomechanical cantilever, which works even for the low-frequency mechanical mode and under weak cooling lasers. The cantilever is attached by a diamond nitrogen-vacancy center under a strong magnetic field gradient and the cooling is assisted by a dynamical Stark-shift gate. Our scheme can effectively enhance the desired cooling efficiency by avoiding the off-resonant and unexpected carrier transitions, …
We theoretically study the radiation-induced interaction between the mechanical motion of an oscillating mirror and a remotely trapped atomic cloud. When illuminated by continuous-wave radiation, the mirror motion will induce red and blue sideband radiation, which respectively increases and reduces motional excitation. We find that by suitably driving $Λ$-level atoms, the mirror correlation with a specific radiation sideband could be converted from the outgoing to the incoming radiation. Such process allows us to manipulate the heating and cooling effects. Particularly, we develop an optomecha…
We present a complete theory for laser cooling of a macroscopic radio-frequency LC electrical circuit by means of an optoelectromechanical system, consisting of an optical cavity dispersively coupled to a nanomechanical oscillator, which is in turn capacitively coupled to the LC circuit of interest. We determine the optimal parameter regime where the LC resonator can be cooled down to its quantum ground state, which requires a large optomechanical cooperativity, and a larger electromechanical cooperativity. Moreover, comparable optomechanical and electromechanical coupling rates are preferable…
We propose a general and experimentally feasible approach to realize simultaneous ground-state cooling of arbitrary number of near-degenerate, or even fully degenerate mechanical modes, overcoming the limit imposed by the formation of mechanical dark modes. Multiple optical modes are employed to provide different dissipation channels that prevent complete destructive interference of the cooling pathway, and thus eliminating the dark modes. The cooling rate and limit are explicitly specified, in which the distinguishability of the optical modes to the mechanical modes is found to be critical fo…
Optomechanical systems offer unique opportunities to explore macroscopic quantum state and related fundamental problems in quantum mechanics. Here, we propose a quantum optomechanical system involving exchange interaction between spin angular momentum of light and a torsional oscillator. We demonstrate that this system allows coherent control of the torsional quantum state of a torsional oscillator on the single photon level, which facilitates efficient cooling and squeezing of the torsional oscillator. Furthermore, the torsional oscillator with a macroscopic length scale can be prepared in Sc…
We investigate a hybrid electro-mechanical system consisting of a pair of charged macroscopic mechanical oscillators coupled to a small ensemble of Rydberg atoms. The resonant dipole-dipole coupling between an internal atomic Rydberg transition and the mechanics allows cooling to its motional ground state with a single atom despite the considerable mass imbalance between the two subsystems. We show that the rich electronic spectrum of Rydberg atoms, combined with their high degree of optical control, paves the way towards implementing various quantum-control protocol for the mechanical oscilla…
Laser cooling is a fundamental technique used in primary atomic frequency standards, quantum computers, quantum condensed matter physics and tests of fundamental physics, among other areas. It has been known since the early 1990s that laser cooling can, in principle, be improved by using squeezed light as an electromagnetic reservoir; while quantum feedback control using a squeezed light probe is also predicted to allow improved cooling. Here, we implement quantum feedback control of a micro-mechanical oscillator for the first time with a squeezed probe field. This allows quantum-enhanced feed…
Ground-state cooling of mechanical resonators is an important task in quantum optomechanics, because it is a necessary prerequisite for creation, manipulation, and application of macroscopic mechanical coherence. Here, we propose a transient-state scheme to accelerate ground-state cooling of a mechanical resonator in a three-mode loop-coupled optomechanical system via shortcuts to adiabaticity (STA). We consider four kinds of coupling protocols and calculate the evolution of the mean phonon number of the mechanical resonator in both the adiabatic and STA cases. We verify that the ground-state …
Quantum manipulation of coupled mechanical resonators has become an important research topic in optomechanics because these systems can be used to study the quantum coherence effects involving multiple mechanical modes. A prerequisite for observing macroscopic mechanical coherence is to cool the mechanical resonators to their ground state. Here we propose a theoretical scheme to cool two coupled mechanical resonators by introducing an optomechanical interface. The final mean phonon numbers in the two mechanical resonators are calculated exactly and the results show that the ground-state coolin…
We study cooling of the collective vibrational motion of two 138Ba+ ions confined in an electrodynamic trap and irradiated with laser light close to the resonances S_1/2-P_1/2 (493 nm) and P_1/2-D_3/2 (650 nm). The motional state of the ions is monitored by a spatially resolving photo multiplier. Depending on detuning and intensity of the cooling lasers, macroscopically different motional states corresponding to different ion temperatures are observed. We also derive the ions' temperature from detailed analytical calculations of laser cooling taking into account the Zeeman structure of the ene…
Quantum manipulation of macroscopic mechanical systems is of great interest in both fundamental physics and applications ranging from high-precision metrology to quantum information processing. A crucial goal is to cool the mechanical system to its quantum ground state. In this review, we focus on the cavity optomechanical cooling, which exploits the cavity enhanced interaction between optical field and mechanical motion to reduce the thermal noise. Recent remarkable theoretical and experimental efforts in this field have taken a major step forward in preparing the motional quantum ground stat…
We demonstrate passive feedback cooling of a mechanical resonator based on radiation pressure forces and assisted by photothermal forces in a high-finesse optical cavity. The resonator is a free-standing high-reflectance micro-mirror (of mass m=400ng and mechanical quality factor Q=10^4) that is used as back-mirror in a detuned Fabry-Perot cavity of optical finesse F=500. We observe an increased damping in the dynamics of the mechanical oscillator by a factor of 30 and a corresponding cooling of the oscillator modes below 10 K starting from room temperature. This effect is an important ingredi…
In this paper, we propose a feasible scheme for generating the Schrödinger cat states of a macroscopic mechanical resonator in pulsed cavity optomechanics. Starting with cooling the mechanical oscillator to its ground state, a red and a blue pulses with different powers are simultaneously employed to drive the cavity to achieve squeezed mechanical states. Subsequently, a second red pulse is utilized to generate the macroscopic mechanical quantum superpositions, conditioned on the detection of cavity output photons. Finally, after being stored in the resonator for a period of time, the mechanic…
Sympathetic Cooling of Levitated Optomechanics through Nonreciprocal Coupling
Center for Quantum Technology Research and Key Laboratory of Advanced Optoelectronic Quantum Architecture and Measurements (MOE), School of Physics, Beijing Institute of Technology（北京理工大学物理学院量子技术研究中心及先进光电子量子架构与测量教育部重点实验室）
Sympathetic cooling with ultracold atoms and atomic ions enables ultralow temperatures in systems where direct laser or evaporative cooling is not possible. It has so far been limited to the cooling of other microscopic particles, with masses up to $90$ times larger than that of the coolant atom. Here we use ultracold atoms to sympathetically cool the vibrations of a Si$_3$N$_4$ nanomembrane, whose mass exceeds that of the atomic ensemble by a factor of $10^{10}$. The coupling of atomic and membrane vibrations is mediated by laser light over a macroscopic distance and enhanced by placing the m…
Cavity optomechanics provides a unique platform for controlling micromechanical systems by means of optical fields that crosses the classical-quantum boundary to achieve solid foundations for quantum technologies. Currently, optomechanical resonators have become promising candidates for the development of precisely controlled nano-motors, ultrasensitive sensors and robust quantum information processors. For all these applications, a crucial requirement is to cool the mechanical resonators down to their quantum ground states. In this paper, we present a novel cooling scheme to further cool a mi…
Optically trapped nanoparticles have recently emerged as exciting candidates for tests of quantum mechanics at the macroscale and as versatile platforms for ultrasensitive metrology. Recent experiments have demonstrated parametric feedback cooling, nonequilibrium physics, and temperature detection, all in the classical regime. Here we provide the first quantum model for trapped nanoparticle cooling and force sensing. In contrast to existing theories, our work indicates that the nanomechanical ground state may be prepared without using an optical resonator; that the cooling mechanism correspond…
The apparent conflict between general relativity and quantum mechanics remains one of the unresolved mysteries of the physical world. According to recent theories, this conflict results in gravity-induced quantum state reduction of "Schrödinger cats", quantum superpositions of macroscopic observables. In recent years, great progress has been made in cooling micromechanical resonators towards their quantum mechanical ground state. This work is an important step towards the creation of Schrödinger cats in the laboratory, and the study of their destruction by decoherence. A direct test of the gra…
Micro- and nanoscale opto-mechanical systems provide radiation pressure coupling of optical and mechanical degree of freedom and are actively pursued for their ability to explore quantum mechanical phenomena of macroscopic objects. Many of these investigations require preparation of the mechanical system in or close to its quantum ground state. Remarkable progress in ground state cooling has been achieved for trapped ions and atoms confined in optical lattices. Imperative to this progress has been the technique of resolved sideband cooling, which allows overcoming the inherent temperature limi…
A technique is proposed to cool Fermi gases to the regime of quantum degeneracy based on the expected inhibition of spontaneous emission due to the Pauli principle. The reduction of the linewidth for spontaneous emission originates a corresponding reduction of the Doppler temperature, which under specific conditions may give rise to a runaway process through which fermions are progressively cooled. The approach requires a combination of a magneto-optical trap as a cooling system and an optical dipole trap to enhance quantum degeneracy. This results in expected Fermi degeneracy factors $T/T_F$ …
Observing and controlling macroscopic quantum systems has long been a driving force in research on quantum physics. In this endeavor, strong coupling between individual quantum systems and mechanical oscillators is being actively pursued. While both read-out of mechanical motion using coherent control of spin systems and single spin read-out using pristine oscillators have been demonstrated, temperature control of the motion of a macroscopic object using long-lived electronic spins has not been reported. Here, we observe both a spin-dependent torque and spin-cooling of the motion of a trapped …
Degenerate quantum gases are instrumental in advancing many-body quantum physics and underpin emerging precision sensing technologies. All state-of-the-art experiments use evaporative cooling to achieve the ultracold temperatures needed for quantum degeneracy, yet evaporative cooling is extremely lossy: more than 99.9% of the gas is discarded. Such final particle number limitations constrain imaging resolution, gas lifetime, and applications leveraging macroscopic quantum coherence. Here we show that atomic Bose gases can be cooled to quantum degeneracy using real-time feedback, an entirely ne…
We describe a measurement-and-feedback technique to deterministically prepare low-entropy states of atomic spin ensembles. Using quantum non-demolition measurement and incoherent optical feedback, we drive arbitrary states in the spin-orientation space toward the origin of the spin space. We observe 12 dB of spin noise reduction, or a factor of 63 reduction in phase-space volume. We find optimal feedback conditions and show that multi-stage feedback is advantageous. An input-output calculation of quantum noise incorporating realistic quantum noise sources and experimental limitations agrees we…
Quantum fluctuations of the electromagnetic vacuum impose an observable quantum limit to the lowest temperatures that can be reached with conventional laser cooling techniques. As laser cooling experiments continue to bring massive mechanical systems to unprecedented temperatures, this quantum limit takes on increasingly greater practical importance in the laboratory. Fortunately, vacuum fluctuations are not immutable, and can be "squeezed" through the generation of entangled photon pairs. Here we propose and experimentally demonstrate that squeezed light can be used to sideband cool the motio…
Optical self-cooling of a membrane oscillator in a cavity optomechanical experiment at room temperature
Università di Firenze（佛罗伦萨大学）；Institute of Materials for Electronics and Magnetism, Nanoscience-Trento-FBK Division（电子与磁性材料研究所，纳米科学-特伦托-FBK分部）；Istituto Nazionale di Fisica Nucleare (INFN), Trento Institute for Fundamental Physics and Application（意大利国家核物理研究所（INFN），特伦托基础物理与应用研究所）；CNR-INO（意大利国家研究委员会-光学研究所）；INFN, Sezione di Firenze（意大利国家核物理研究所，佛罗伦萨分部）；Delft University of Technology（代尔夫特理工大学）
Quantum entanglement in mechanical systems is not only a key signature of macroscopic quantum effects, but has wide applications in quantum technologies. Here we proposed an effective approach for creating strong steady-state entanglement between two directly coupled mechanical oscillators (or a mechanical oscillator and a microwave resonator) in a modulated optomechanical system. The entanglement is achieved by combining the processes of a cavity cooling and the two-mode parametric interaction, which can surpass the bound on the maximal stationary entanglement from the two-mode parametric int…
The dark-mode effect is a stubborn obstacle for ground-state cooling of multiple degenerate mechanical modes optomechanically coupled to a common cavity-field mode. Here we propose an auxiliary-cavity-mode method for simultaneous ground-state cooling of two degenerate or near-degenerate mechanical modes by breaking the dark mode. We find that the introduction of the auxiliary cavity mode not only breaks the dark-mode effect, but also provides a new cooling channel to extract the thermal excitations stored in the dark mode. Moreover, we study the general physical-coupling configurations for bre…
The advent of laser cooling techniques revolutionized the study of many atomic-scale systems. This has fueled progress towards quantum computers by preparing trapped ions in their motional ground state, and generating new states of matter by achieving Bose-Einstein condensation of atomic vapors. Analogous cooling techniques provide a general and flexible method for preparing macroscopic objects in their motional ground state, bringing the powerful technology of micromechanics into the quantum regime. Cavity opto- or electro-mechanical systems achieve sideband cooling through the strong interac…
We study the energy-level evolution and ground-state cooling of mechanical resonators under a synthetic phononic gauge field. The tunable gauge phase is mediated by the phase difference between the $\mathcal{PT}$- and anti-$\mathcal{PT}$-symmetric mechanical couplings in a multimode optomechanical system. The transmission spectrum then exhibits the asymmetric Fano line shape or double optomechanically induced transparency by modulating the gauge phase. Moreover, the eigenvalues will collapse and become degenerate although the mechanical coupling is continuously increased. Such counterintuitive…
Hybrid devices based on the superconducting qubits have emerged as a promising platform for controlling the quantum states of macroscopic resonators. The nonlinearity added by a qubit can be a valuable resource for such control. Here we study a hybrid system consisting of a mechanical resonator longitudinally coupled to a transmon qubit. The qubit readout can be done by coupling to a readout mode like in c-QED setup. The coupling between the mechanical resonator and transmon qubit can be implemented by modulation of the SQUID inductance. In such a tri-partite system, we analyze the steady-stat…
