We present a novel adaptive deep joint source-channel coding (JSCC) scheme for wireless image transmission. The proposed scheme supports multiple rates using a single deep neural network (DNN) model and learns to dynamically control the rate based on the channel condition and image contents. Specifically, a policy network is introduced to exploit the tradeoff space between the rate and signal quality. To train the policy network, the Gumbel-Softmax trick is adopted to make the policy network differentiable and hence the whole JSCC scheme can be trained end-to-end. To the best of our knowledge, this is the first deep JSCC scheme that can automatically adjust its rate using a single network model. Experiments show that our scheme successfully learns a reasonable policy that decreases channel bandwidth utilization for high SNR scenarios or simple image contents. For an arbitrary target rate, our rate-adaptive scheme using a single model achieves similar performance compared to an optimized model specifically trained for that fixed target rate. To reproduce our results, we make the source code publicly available at https://github.com/mingyuyng/Dynamic_JSCC.
Considering the problem of joint source-channel coding (JSCC) for multi-user transmission of images over noisy channels, an autoencoder-based novel deep joint source-channel coding scheme is proposed in this paper. In the proposed JSCC scheme, the decoder can estimate the signal-to-noise ratio (SNR) and use it to adaptively decode the transmitted image. Experiments demonstrate that the proposed scheme achieves impressive results in adaptability for different SNRs and is robust to the decoder's estimation error of the SNR. To the best of our knowledge, this is the first deep JSCC scheme that fo…
As a subfield of network coding, physical-layer network coding (PNC) can effectively enhance the throughput of wireless networks by mapping superimposed signals at receiver to other forms of user messages. Over the past twenty years, PNC has received significant research attention and has been widely studied in various communication scenarios, e.g., two-way relay communications (TWRC), nonorthogonal multiple access (NOMA) in 5G networks, random access networks, etc. To ensure network reliability, channel-coded PNC is proposed and related communication techniques are investigated, such as the d…
Conventional wireless techniques are becoming inadequate for beyond fifth-generation (5G) networks due to latency and bandwidth considerations. To improve the error performance and throughput of wireless communication systems, we propose physical layer network coding (PNC) in an intelligent reflecting surface (IRS)-assisted environment. We consider an IRS-aided butterfly network, where we propose an algorithm for obtaining the optimal IRS phases. Also, analytic expressions for the bit error rate (BER) are derived. The numerical results demonstrate that the proposed scheme significantly improve…
Maximum distance separable erasure coding has been introduced in wireless networks based on random medium access protocols in order to recover collided and erased packets. So, this help to avoid retransmission process which weaken the network throughput and prolong the overall propagation delay. However, erasure coding may degrade the network performances by causing overload traffic due to added redundancy (parity) and also when extending the propagation delay due to additional calculations and encoding/decoding process time which can lead quickly the network into saturation. Here, the redunda…
Future wireless systems need to support diverse big data and Internet of Things (IoT) applications with dramatically different quality of service (QoS) requirements. Novel designs across the protocol stack are required to achieve effective and efficient QoS provision. In this article, we introduce a novel data oriented approach for the design and analysis of advanced wireless transmission technologies. Unlike conventional channel-oriented approach, we propose to optimally design transmission strategies for individual data transmission sessions, considering both the QoS requirement and instanta…
We present a deep learning based joint source channel coding (JSCC) scheme for wireless image transmission over multipath fading channels with non-linear signal clipping. The proposed encoder and decoder use convolutional neural networks (CNN) and directly map the source images to complex-valued baseband samples for orthogonal frequency division multiplexing (OFDM) transmission. The proposed model-driven machine learning approach eliminates the need for separate source and channel coding while integrating an OFDM datapath to cope with multipath fading channels. The end-to-end JSCC communicatio…
The signal recovery performance of the rectangular-type Analog Joint Source-Channel Coding (AJSCC) is analyzed in this work for high and medium/low Signal-to-Noise Ratio (SNR) scenarios in the wireless sensing systems. The analysis and derivations of the medium/low SNR scenario are based on the comprehensive listing of all the signal variation cases in the three-dimensional signal mapping curve of the rectangular-type AJSCC. Theoretical formulations of Mean Square Error (MSE) performance are derived for both analog sensing and digital sensing systems with rectangular-type AJSCC. Evaluation res…
Adaptive modulation and coding (AMC) is widely employed in modern wireless communication systems to improve the transmission efficiency by adjusting the transmission rate according to the channel conditions. Thus, AMC can provide very efficient use of channel resources especially over fading channels. Quadrature Amplitude Modulation (QAM) is an ef- ficient and widely employed digital modulation technique. It typically employs a rectangular signal constellation. Therefore the decision regions of the constellation are square partitions of the two-dimensional signal space. However, it is well kno…
We investigate joint source channel coding (JSCC) for wireless image transmission over multipath fading channels. Inspired by recent works on deep learning based JSCC and model-based learning methods, we combine an autoencoder with orthogonal frequency division multiplexing (OFDM) to cope with multipath fading. The proposed encoder and decoder use convolutional neural networks (CNNs) and directly map the source images to complex-valued baseband samples for OFDM transmission. The multipath channel and OFDM are represented by non-trainable (deterministic) but differentiable layers so that the sy…
To enable low-power and low-complexity wireless monitoring, an improved circuit design of Analog Joint Source Channel Coding (AJSCC) is proposed for wireless sensor nodes. This innovative design is based on Analog Divider Blocks (ADB) with tunable spacing between AJSCC levels. The ADB controls the switching between two types of Voltage Controlled Voltage Sources (VCVS). LTSpice simulations were performed to evaluate the performance of the circuit, and the power consumption and circuit complexity of this new ADB-based design were compared with our previous parallel-VCVS design. It is found that…
Intrusion detection has become one of the most critical tasks in a wireless network to prevent service outages that can take long to fix. The sheer variety of anomalous events necessitates adopting cognitive anomaly detection methods instead of the traditional signature-based detection techniques. This paper proposes an anomaly detection methodology for wireless systems that is based on monitoring and analyzing radio frequency (RF) spectrum activities. Our detection technique leverages an existing solution for the video prediction problem, and uses it on image sequences generated from monitori…
The growing popularity of big data and Internet of Things (IoT) applications bring new challenges to the wireless communication community. Wireless transmission systems should more efficiently support the large amount of data traffics from diverse types of information sources. In this article, we introduce a novel data-oriented approach for the design and optimization of wireless transmission strategies. Specifically, we define new performance metrics for individual data transmission session and apply them to compare two popular channel-adaptive transmission strategies. We develop several inte…
The growing popularity of Internet of Things (IoT) applications brings new challenges to the wireless communication community. Numerous smart devices and sensors within IoT will generate a massive amount of short data packets. Future wireless transmission systems need to support the reliable transmission of such small data with extremely high energy efficiency. In this article, we introduce a novel data-oriented approach for characterizing the energy efficiency of wireless transmission strategies for IoT applications. Specifically, we present new energy efficiency performance limits targeting …
Power supply for Internet of Things (IoT) devices is one of the bottlenecks in IoT development. To provide perpetual power supply to IoT devices, resonant beam charging (RBC) is a promising safe, long-range and high-power wireless power transfer solution. How long distance can RBC reach and how much power can RBC transfer? In this paper, we analyze the RBC's consistent and steady operational conditions, which determine the maximum power transmission distance. Moreover, we study the power transmission efficiency within the operational distance, which determines the deliverable power through the…
Physical layer network coding (PNC) has been studied to serve wireless network MIMO systems with much lower backhaul load than approaches such as Cloud Radio Access Network (Cloud-RAN) and coordinated multipoint (CoMP). In this paper, we present a design guideline of engineering applicable PNC to fulfil the request of high user densities in 5G wireless RAN infrastructure. Unlike compute-and-forward and PNC design criteria for two-way relay channels, the proposed guideline is designed for uplink of network MIMO (N-MIMO) systems. We show that the proposed design criteria guarantee that 1) the wh…
University College London（伦敦大学学院）；Imperial College London（帝国理工学院）
We propose a joint source and channel coding (JSCC) technique for wireless image transmission that does not rely on explicit codes for either compression or error correction; instead, it directly maps the image pixel values to the complex-valued channel input symbols. We parameterize the encoder and decoder functions by two convolutional neural networks (CNNs), which are trained jointly, and can be considered as an autoencoder with a non-trainable layer in the middle that represents the noisy communication channel. Our results show that the proposed deep JSCC scheme outperforms digital transmi…
In this thesis, we mainly investigate the lattice coding problem of the downlink communication between a base station and multiple users. The base station broadcasts a message containing each user's intended message. The capacity limit of such a system setting is already well-known while the design of practical coding and modulation schemes to approach the theoretical limit has not been fully studied and investigated in the literature. This thesis attempts to address this problem by providing a systematic design on lattice coding and modulation schemes for downlink multiuser communication syst…
Consider a mobile edge computing system in which users wish to obtain the result of a linear inference operation on locally measured input data. Unlike the offloaded input data, the model weight matrix is distributed across wireless Edge Nodes (ENs). ENs have non-deterministic computing times, and they can transmit any shared computed output back to the users cooperatively. This letter investigates the potential advantages obtained by coding model information prior to ENs' storage. Through an information-theoretic analysis, it is concluded that, while generally limiting cooperation opportuniti…
