In this article, based on some simple and reasonable assumptions, we derive a Gaussian noise model for quantum amplitude estimation. We provide results from quantum amplitude estimation run on various IBM superconducting quantum computers and on Quantinuum's H1 trapped-ion quantum computer to show that the proposed model is a good fit for real-world experimental data. We also show that the proposed Gaussian noise model can be easily composed with other noise models in order to capture effects that are not well described by Gaussian noise. We give a generalized procedure for how to embed this noise model into any quantum-phase-estimation-free quantum amplitude estimation algorithm, such that the amplitude estimation is "noise aware." We then provide experimental results from running an implementation of noise-aware quantum amplitude estimation using data from an IBM superconducting quantum computer, demonstrating that the addition of "noise awareness" serves as an effective means of quantum error mitigation.
This paper focuses on the quantum amplitude estimation algorithm, which is a core subroutine in quantum computation for various applications. The conventional approach for amplitude estimation is to use the phase estimation algorithm, which consists of many controlled amplification operations followed by a quantum Fourier transform. However, the whole procedure is hard to implement with current and near-term quantum computers. In this paper, we propose a quantum amplitude estimation algorithm without the use of expensive controlled operations; the key idea is to utilize the maximum likelihood …
Amplitude estimation algorithms are based on Grover's algorithm: alternating reflections about the input state and the desired outcome. But what if we are given the ability to perform arbitrary rotations, instead of just reflections? In this situation, we find that quantum signal processing lets us estimate the amplitude in a more flexible way. We leverage this technique to give improved and simplified algorithms for many amplitude estimation tasks: we perform non-destructive estimation without any assumptions on the amplitude, develop an algorithm with improved performance in practice, presen…
We show how phase and amplitude estimation algorithms can be parallelized. This can reduce the gate depth of the quantum circuits to that of a single Grover operator with a small overhead. Further, we show that for quantum amplitude estimation, the parallelization can lead to vast improvements in resilience against quantum errors. The resilience is not caused by the lower gate depth, but by the structure of the algorithm. Even in cases with errors that make it impossible to read out the exact or approximate solutions from conventional amplitude estimation, our parallel approach provided the co…
We propose to perform amplitude estimation with the help of constant-depth quantum circuits that variationally approximate states during amplitude amplification. In the context of Monte Carlo (MC) integration, we numerically show that shallow circuits can accurately approximate many amplitude amplification steps. We combine the variational approach with maximum likelihood amplitude estimation [Y. Suzuki et al., Quantum Inf. Process. 19, 75 (2020)] in variational quantum amplitude estimation (VQAE). VQAE typically has larger computational requirements than classical MC sampling. To reduce the v…
We introduce the Real Quantum Amplitude Estimation (RQAE) algorithm, an extension of Quantum Amplitude Estimation (QAE) which is sensitive to the sign of the amplitude. RQAE is an iterative algorithm which offers explicit control over the amplification policy through an adjustable parameter. We provide a rigorous analysis of the RQAE performance and prove that it achieves a quadratic speedup, modulo logarithmic corrections, with respect to unamplified sampling. Besides, we corroborate the theoretical analysis with a set of numerical experiments.
In this paper, we introduce an efficient algorithm for the quantum amplitude estimation task which works in noisy intermediate-scale quantum(NISQ) devices. The quantum amplitude estimation is an important problem which has various applications in fields such as quantum chemistry, machine learning, and finance. Because the well-known algorithm for the quantum amplitude estimation using the phase estimation cannot be executed in NISQ devices, alternative approaches have been proposed in recent literature. Some of them provide a proof of the upper bound which almost achieves the Heisenberg scalin…
Many quantum algorithms contain an important subroutine, the quantum amplitude estimation. As the name implies, this is essentially the parameter estimation problem and thus can be handled via the established statistical estimation theory. However, this problem has an intrinsic difficulty that the system, i.e., the real quantum computing device, inevitably introduces unknown noise; the probability distribution model then has to incorporate many nuisance noise parameters, resulting that the construction of an optimal estimator becomes inefficient and difficult. For this problem, we apply the th…
We provide a method for estimating spectral gaps in low-dimensional systems. Unlike traditional phase estimation, our approach does not require ancillary qubits nor does it require well characterised gates. Instead, it only requires the ability to perform approximate Haar-random unitary operations, applying the unitary whose eigenspectrum is sought out and performing measurements in the computational basis. We discuss application of these ideas to in-place amplitude estimation and quantum device calibration.
Amplitude estimation is a fundamental quantum algorithmic primitive that enables quantum computers to achieve quadratic speedups for a large class of statistical estimation problems, including Monte Carlo methods. The main drawback from the perspective of near term hardware implementations is that the amplitude estimation algorithm requires very deep quantum circuits. Recent works have succeeded in somewhat reducing the necessary resources for such algorithms, by trading off some of the speedup for lower depth circuits, but high quality qubits are still needed for demonstrating such algorithms…
We introduce a new variant of Quantum Amplitude Estimation (QAE), called Iterative QAE (IQAE), which does not rely on Quantum Phase Estimation (QPE) but is only based on Grover's Algorithm, which reduces the required number of qubits and gates. We provide a rigorous analysis of IQAE and prove that it achieves a quadratic speedup up to a double-logarithmic factor compared to classical Monte Carlo simulation. Furthermore, we show with an empirical study that our algorithm outperforms other known QAE variants without QPE, some even by orders of magnitude, i.e., our algorithm requires significantl…
Near-Heisenberg-limited parallel amplitude estimation with logarithmic depth circuit
Mizuho Research & Technologies, Ltd.（瑞穗研究与技术株式会社）；Quantum Computing Center, Keio University（庆应义塾大学量子计算中心）；Graduate School of Science and Technology, Keio University（庆应义塾大学理工学研究科）；Department of Applied Physics and Physico-Informatics, Keio University（庆应义塾大学应用物理与物性信息学系）
This paper generalizes the quantum amplitude amplification and amplitude estimation algorithms to work with non-boolean oracles. The action of a non-boolean oracle $U_φ$ on an eigenstate $|x\rangle$ is to apply a state-dependent phase-shift $φ(x)$. Unlike boolean oracles, the eigenvalues $\exp(iφ(x))$ of a non-boolean oracle are not restricted to be $\pm 1$. Two new oracular algorithms based on such non-boolean oracles are introduced. The first is the non-boolean amplitude amplification algorithm, which preferentially amplifies the amplitudes of the eigenstates based on the value of $φ(x)$. St…
In this paper, we propose a quantum amplitude estimation method that uses a modified Grover operator and quadratically improves the estimation accuracy in the ideal case, as in the conventional one using the standard Grover operator. Under the depolarizing noise, the proposed method can outperform the conventional one in the sense that it can in principle achieve the ultimate estimation accuracy characterized by the quantum Fisher information in the limit of a large number of qubits, while the conventional one cannot achieve the same value of ultimate accuracy. In general this superiority requ…
Recently we find several candidates of quantum algorithms that may be implementable in near-term devices for estimating the amplitude of a given quantum state, which is a core sub- routine in various computing tasks such as the Monte Carlo methods. One of those algorithms is based on the maximum likelihood estimate with parallelized quantum circuits. In this paper, we extend this method so that it incorporates the realistic noise effect, and then give an experimental demonstration on a superconducting IBM Quantum device. The maximum likelihood estimator is constructed based on the model assumi…
We consider performing phase estimation under the following conditions: we are given only one copy of the input state, the input state does not have to be an eigenstate of the unitary, and the state must not be measured. Most quantum estimation algorithms make assumptions that make them unsuitable for this 'coherent' setting, leaving only the textbook approach. We present novel algorithms for phase, energy, and amplitude estimation that are both conceptually and computationally simpler than the textbook method, featuring both a smaller query complexity and ancilla footprint. They do not requir…
Since the quantum amplitude estimation (QAE) was invented by Brassard et al., 2002, several advanced algorithms have recently been published (Grinko et al., 2019, Aaronson et al, and Suzuki et al., 2020). The main difference between the variants and the original algorithm is that the variants do not need quantum phase estimation (QPE), a key component of the canonical QAE (Brassard et al., 2002), that is composed of many expensive operations on NISQ devices. In this paper, we compare and analyze two of these new QAE approaches (Grinko et al., 2019, and Suzuki et al., 2020) by implementation us…
This study presents a quantum circuit for estimating the pi value using arithmetic circuits and by quantum amplitude estimation. We review two types of quantum multipliers and propose quantum squaring circuits based on the multiplier as basic arithmetic circuits required for performing quantum computations. The squarer realized by a quantum adder with the gate size of $ O(n) $ requires $ O(n^2) $ gates and at least one ancillary qubits, while that realized by using quantum Fourier transform (QFT) requires $ O(n^3) $ gates without ancillary qubit. The proposed quantum circuit to estimate pi is …
Since the publication of the Quantum Amplitude Estimation (QAE) algorithm by Brassard et al., 2002, several variations have been proposed, such as Aaronson et al., 2019, Grinko et al., 2019, and Suzuki et al., 2020. The main difference between the original and the variants is the exclusion of Quantum Phase Estimation (QPE) by the latter. This difference is notable given that QPE is the key component of original QAE, but is composed of many operations considered expensive for the current NISQ era devices. We compare two recently proposed variants (Grinko et al., 2019 and Suzuki et al., 2020) by…
Quantum Amplitude Estimation (QAE) -- a technique by which the amplitude of a given quantum state can be estimated with quadratically fewer queries than by standard sampling -- is a key sub-routine in several important quantum algorithms, including Grover search and Quantum Monte-Carlo methods. An obstacle to implementing QAE in near-term noisy intermediate-scale quantum (NISQ) devices has been the need to perform Quantum Phase Estimation (QPE) -- a costly procedure -- as a sub-routine. This impediment was lifted with various QPE-free methods of QAE, wherein Grover queries of varying depths / …
Classical simulation of quantum circuits is crucial for evaluating and validating the design of new quantum algorithms. However, the number of quantum state amplitudes increases exponentially with the number of qubits, leading to the exponential growth of the memory requirement for the simulations. In this paper, we present a new data reduction technique to reduce the memory requirement of quantum circuit simulations. We apply our amplitude-aware lossy compression technique to the quantum state amplitude vector to trade the computation time and fidelity for memory space. The experimental resul…
Quantum amplitude estimation is a key sub-routine of a number of quantum algorithms with various applications. We propose an adaptive algorithm for interval estimation of amplitudes. The quantum part of the algorithm is based only on Grover's algorithm. The key ingredient is the introduction of an adjustment factor, which adjusts the amplitude of good states such that the amplitude after the adjustment, and the original amplitude, can be estimated without ambiguity in the subsequent step. We show with numerical studies that the proposed algorithm uses a similar number of quantum queries to ach…
Amplitude filtering is concerned with identifying basis-states in a superposition whose amplitudes are greater than a specified threshold; probability filtering is defined analogously for probabilities. Given the scarcity of qubits, the focus of this work is to design log-space algorithms for them. Both algorithms follow a similar pattern of estimating the amplitude (or, probability for the latter problem) of each state, in superposition, then comparing each estimate against the threshold for setting up a flag qubit upon success, finally followed by amplitude amplification of states in which t…
Quantum chemistry and materials is one of the most promising applications of quantum computing. Yet much work is still to be done in matching industry-relevant problems in these areas with quantum algorithms that can solve them. Most previous efforts have carried out resource estimations for quantum algorithms run on large-scale fault-tolerant architectures, which include the quantum phase estimation algorithm. In contrast, few have assessed the performance of near-term quantum algorithms, which include the variational quantum eigensolver (VQE) algorithm. Recently, a large-scale benchmark stud…
We design and analyze two new low depth algorithms for amplitude estimation (AE) achieving an optimal tradeoff between the quantum speedup and circuit depth. For $β\in (0,1]$, our algorithms require $N= \tilde{O}( \frac{1}{ ε^{1+β}})$ oracle calls and require the oracle to be called sequentially $D= O( \frac{1}{ ε^{1-β}})$ times to perform amplitude estimation within additive error $ε$. These algorithms interpolate between the classical algorithm $(β=1)$ and the standard quantum algorithm ($β=0$) and achieve a tradeoff $ND= O(1/ε^{2})$. These algorithms bring quantum speedups for Monte Carlo m…
We present mathematical and conceptual foundations for the task of robust amplitude estimation using engineered likelihood functions (ELFs), a framework introduced in Wang et al. [PRX Quantum 2, 010346 (2021)] that uses Bayesian inference to enhance the rate of information gain in quantum sampling. These ELFs, which are obtained by choosing tunable parameters in a parametrized quantum circuit to minimize the expected posterior variance of an estimated parameter, play an important role in estimating the expectation values of quantum observables. We give a thorough characterization and analysis …
