We numerically investigate the effect of non-condensable gas inside a vapor bubble on bubble dynamics, collapse pressure and pressure impact of spherical and aspherical bubble collapses. Free gas inside a vapor bubble has a damping effect that can weaken the pressure wave and enhance the bubble rebound. To estimate this effect numerically, we derive and validate a multi-component model for vapor bubbles containing gas. For the cavitating liquid and the non-condensable gas, we employ a homogeneous mixture model with a coupled equation of state for all components. The cavitation model for the cavitating liquid is a barotropic thermodynamic equilibrium model. Compressibility of all phases is considered in order to capture the shock wave of the bubble collapse. After validating the model with an analytical energy partitioning model, simulations of collapsing wall-attached bubbles with different stand-off distances are performed. The effect of the non-condensable gas on rebound and damping of the emitted shock wave is well captured.
Dynamics of vapor bubble train in flow boiling heat transfer in microchannels
State Key Laboratory of Engines, Tianjin University（天津大学内燃机燃烧学国家重点实验室）；National Industry-Education Platform of Energy Storage, Tianjin University（天津大学国家储能产教融合创新平台）
Electrofuels (e-fuels) produced from renewable electricity and carbon sources have gained significant attention in recent years as promising alternatives to fossil fuels for the transportation sector. However, the highly volatile e-fuels, such as short-chain oxymethylene ethers are prone to flash vaporization phenomena, which is associated with the formation and growth of vapor bubbles, followed by explosive bursting of the liquid jet. The simulation of a flash boiling spray of such highly volatile liquid fuels in the context of automotive or cryogenic engines is numerically challenging due to…
Interaction between vapor bubbles during flow boiling heat transfer in microchannels
State Key Laboratory of Engines, Tianjin University（天津大学内燃机燃烧学国家重点实验室）；National Industry-Education Platform of Energy Storage, Tianjin University（天津大学国家储能产教融合创新平台）
We consider the collapse behavior of cavitation bubbles near walls under high ambient pressure conditions. Generic configurations with different stand-off distances are investigated by numerical simulation using a fully compressible two-phase flow solver including phase change. The results show that the stand-off distance has significant effects on collapse dynamics, micro-jet formation, rebound, and maximum wall pressure. A relation between cavitation induced material damage and corresponding collapse mechanisms is obtained from pressure-impact data at the wall. We analyze the resolution depe…
Water-immersed gold nanoparticles irradiated by a laser can trigger the nucleation of plasmonic bubbles after a delay time of a few microseconds [Wang et al., Proc. Natl. Acad. Sci. USA 122, 9253,(2018)]. Here we systematically investigated the light-vapor conversion efficiency, η, of these plasmonic bubbles as a function of the ambient pressure. The efficiency of the formation of these initial-phase and mainly water-vapor containing bubbles, which is defined as the ratio of the energy that is required to form the vapor bubbles and the total energy dumped in the gold nanoparticles before nucle…
Laser triggered and photothermally induced vapor bubbles have emerged as promising approaches to facilitate optomechanical energy conversion for numerous relevant applications in micro/nanofluidics. Here we report the observation of a sub-megahertz spontaneous nucleation of explosive plasmonic bubbles, triggered by a continuous wave laser. The periodic nucleation is found to be a result of the competition of Kelvin impulsive forces and thermal Marangoni forces applied on residual bubbles after collapse. The former originates from asymmetric bubble collapse, resulting in the directed locomotion…
In this paper, a numerical study is conducted to investigate boiling of a cryogen on a solid surface as well as on a liquid surface. Both single mode and multi-mode boiling is reported for boiling on to a solid surface. In case of boiling on a liquid surface, liquid nitrogen is selected as the cryogen (boiling fluid) and water is chosen as the base fluid (heating fluid). Different flow instabilities and their underlying consequences during boiling of a cryogen are also discussed. For the boiling on a solid surface, in the single mode, bubble growth, its departure, and area weighted average hea…
A Universal Scaling Law for Jets of Collapsing Bubbles
空化气泡在压力梯度grad（p）中塌陷和反弹形成被“蒸汽射流”包围的“微射流”。这封信提出了前所未有的观察蒸汽射流形成在一个统一的重力诱导梯度（p），调制上抛物线飞行。数据揭示了归一化射流体积与液体密度和粘度无关，并且与zeta=grad（p）* R 0/p成比例，其中R 0是最大气泡半径，p是驱动压力。受“Kelvin-Blake”考虑启发的推导证实了这一定律，并揭示了它对表面张力的依赖性可以忽略不计。我们进一步推测，只有当zeta>0.0004时，射流才能穿透气泡边界。
We present results of large eddy simulations of a cavitating nozzle flow and injection into gas, investigating the interactions of cavitation in the nozzle, primary jet breakup, mass-flow rates, and gas entrainment. During strong cavitation, detached vapor structures can reach the nozzle outlet, leading to partial entrainment of gas from the outflow region into the nozzle. The gas entrainment can affect cavitation dynamics, mass-flow rates, and jet breakup. Moreover, the implosion of detached vapor structures induces pressure peaks that on the one hand amplify turbulent fluctuations and subseq…
A gas or vapor bubble collapsing in the vicinity of a rigid boundary displaces towards the boundary and produces a high-speed jet directed at the boundary. This behavior has been shown to be a function of the 'anisotropy' of the collapse, measured by a dimensionless representation of the Kelvin impulse known as the anisotropy parameter [Supponen et al., J. Fluid Mech. 802, 263-293 (2016)]. However, characterisation of the anisotropy parameter in different geometries has been limited to simplified analytic solutions. In this work we develop an inexpensive numerical model, based on the Boundary …
