The use of low-resolution digital-to-analog and analog-to-digital converters (DACs and ADCs) significantly benefits energy efficiency (EE) at the cost of high quantization noise in implementing massive multiple-input multiple-output (MIMO) systems. For maximizing EE in quantized downlink massive MIMO systems, this paper formulates a precoding optimization problem with antenna selection; yet acquiring the optimal joint precoding and antenna selection solution is challenging due to the intricate EE characterization. To resolve this challenge, we decompose the problem into precoding direction and power optimization problems. For precoding direction, we characterize the first-order optimality condition, which entails the effects of quantization distortion and antenna selection. For precoding power, we obtain the optimum solution using a gradient descent algorithm to maximize EE for given precoding direction. We cast the derived condition as a functional eigenvalue problem, wherein finding the principal eigenvector attains the best local optimal point. To this end, we propose generalized power iteration based algorithm. Alternating these two methods, our algorithm identifies a joint solution of the active antenna set and the precoding direction and power. In simulations, the proposed methods provide considerable performance gains. Our results suggest that a few-bit DACs are sufficient for achieving high EE in massive MIMO systems.
Coarsely quantized MIMO signalling methods have gained popularity in the recent developments of massive MIMO as they open up opportunities for massive MIMO implementation using cheap and power-efficient radio-frequency front-ends. This paper presents a new one-bit MIMO precoding approach using spatial Sigma-Delta ($ΣΔ$) modulation. In previous one-bit MIMO precoding research, one mainly focuses on using optimization to tackle the difficult binary signal optimization problem that arises from the precoding design. Our approach attempts a different route. Assuming angular MIMO channels, we apply …
Precoding is a method of compensating the channel at the transmitter. This work presents a novel method of data detection in turbo coded single user massive multiple input multiple output (MIMO) systems using precoding. We show via computer simulations that, when precoding is used, re-transmitting the data does not result in significant reduction in bit-error-rate (BER), thus increasing the spectral efficiency, compared to the case without precoding. Moreover, increasing the number of transmit and receive antennas results in improved BER.
Using precoding to suppress multi-user interference is a well-known technique to improve spectra efficiency in multiuser multiple-input multiple-output (MU-MIMO) systems, and the pursuit of high performance and low complexity precoding method has been the focus in the last decade. The traditional algorithms including the zero-forcing (ZF) algorithm and the weighted minimum mean square error (WMMSE) algorithm failed to achieve a satisfactory trade-off between complexity and performance. In this paper, leveraging on the power of deep learning, we propose a low-complexity precoding design framewo…
In this letter, we consider linear precoding for downlink massive multi-user (MU) multiple-input multiple-output (MIMO) systems. We propose the novel successively-regularized zero forcing (SRZF) precoding, which exploits successive null spaces of the MIMO channels of the users, along with regularization, to control the inter-user interference (IUI) and to enhance performance and robustness to imperfect channel state information (CSI) at the base station (BS). We study the IUI characteristics of the proposed SRZF precoding for perfect and imperfect CSI at the BS. Furthermore, via computer simul…
One of the first widespread uses of multi-user multiple-input multiple-output (MU-MIMO) is in 5G networks, where each base station has an advanced antenna system (AAS) that is connected to the baseband unit (BBU) with a capacity-constrained fronthaul. In the AAS configuration, multiple passive antenna elements and radio units are integrated into a single box. This paper considers precoded downlink transmission over a single-cell MU-MIMO system. We study optimized linear precoding for AAS with a limited-capacity fronthaul, which requires the precoding matrix to be quantized. We propose a new pr…
In this letter, we study the performance of a downlink multiuser massive multiple-input multiple-output (MIMO) system with sub-connected structure over limited feedback channels. Tight rate approximations are theoretically analyzed for the system with pure analog precoding and hybrid precoding. The effect of quantized analog and digital precoding is characterized in the derived expressions. Furthermore, it is revealed that the pure analog precoding outperforms the hybrid precoding using maximal-ratio transmission (MRT) or zero forcing (ZF) under certain conditions, and we theoretically charact…
Deploying antenna arrays with an asymptotically large aperture will be central to achieving the theoretical gains of massive MIMO in beyond-5G systems. Such extra-large MIMO (XL-MIMO) systems experience propagation conditions which are not typically observed in conventional massive MIMO systems, such as spatial non-stationarities and near-field propagation. Moreover, standard precoding schemes, such as zero-forcing (ZF), may not apply to XL-MIMO transmissions due to the prohibitive complexity associated with such a large-scale scenario. We propose two novel precoding schemes that aim at reduci…
Massive multi-user multiple-input multiple-output (MU-MIMO) wireless systems operating at millimeter-wave (mmWave) frequencies enable simultaneous wideband data transmission to a large number of users. In order to reduce the complexity of MU precoding in all-digital basestation architectures, we propose a two-stage precoding architecture that first performs precoding using a sparse matrix in the beamspace domain, followed by an inverse fast Fourier transform that converts the result to the antenna domain. The sparse precoding matrix requires a small number of multipliers and enables regular ha…
Massive multi-input multiple-out (MIMO) is a key ingredient in improving the spectral efficiencies for next-generation cellular systems. Thanks to the channel reciprocity, in time-division-duplexing mode, each base station (BS) can acquire local channel state information at the transmitter (CSIT) for a set of users possibly located in adjacent cells. When the small cell BSs equipped with not-so-many antennas are densely deployed with marcrocells, a simple noncooperative MIMO precoding technique using local CSIT fails to achieve high spectral efficiency because of strong inter-cell-interference…
In this paper, we consider the precoder design for an underloaded or critically loaded downlink multi-user multiple-input multiple-output (MIMO) communication system. We propose novel precoding and decoding schemes which enhance system performance based on rate splitting at the transmitter and single-stage successive interference cancellation at the receivers. The proposed successive null-space (SNS) precoding utilizes linear combinations of the null-space basis vectors of the successively augmented MIMO channel matrices of the users as precoding vectors to adjust the inter-user-interference e…
Power consumption of multi-user (MU) precoding is a major concern in all-digital massive MU multiple-input multiple-output (MIMO) base-stations with hundreds of antenna elements operating at millimeter-wave (mmWave) frequencies. We propose to replace part of the linear Wiener filter (WF) precoding matrix by a finite-alphabet WF precoding (FAWP) matrix, which enables the use of low-precision hardware that consumes low power and area. To minimize the performance loss of our approach, we present methods that efficiently compute FAWP matrices that best mimic the WF precoder. Our results show that …
Massive multi-user multiple-input multiple-output (MU-MIMO) enables significant gains in spectral efficiency and link reliability compared to conventional small-scale MIMO technology. Furthermore, linear precoders, e.g., using zero forcing or Wiener filter (WF) precoding, are sufficient to achieve excellent error-rate performance in the massive MU-MIMO downlink. However, these methods necessitate centralized processing at the base-station (BS), which causes (i) excessively high interconnect and chip input/output data rates, and (ii) high implementation complexity. We propose two feedforward ar…
Most works on cell-free massive multiple-input multiple-output (MIMO) consider non-cooperative precoding strategies at the base stations (BSs) to avoid extensive channel state information (CSI) exchange via backhaul signaling. However, considerable performance gains can be accomplished by allowing coordination among the BSs. This paper proposes the first distributed framework for cooperative precoding design in cell-free massive MIMO (and, more generally, in joint transmission coordinated multi-point) systems that entirely eliminates the need for backhaul signaling for CSI exchange. A novel ov…
Distributed phased arrays based multiple-input multiple-output (DPA-MIMO) is a recently proposed highly reconfigurable architecture enabling both spatial multiplexing and beamforming in millimeter-wave (mmWave) systems. In this work, we focus on coping with the hybrid precoding for the wideband DPA-MIMO system with orthogonal frequency division multiplexing (OFDM) modulation. More specifically, we propose an alternating direction method of multipliers (ADMM) enabled hybrid precoding approach based on an alternating optimization framework, abbreviated to ADMM-AltMin, for such cooperative array-…
The high energy consumption of massive multi-input multi-out (MIMO) system has become a prominent problem in the millimeter wave(mm-Wave) communication scenario. The hybrid precoding technology greatly reduces the number of radio frequency(RF) chains by handing over part of the coding work to the phase shifting network, which can effectively improve energy efficiency. However, conventional hybrid precoding algorithms based on mathematical means often suffer from performance loss and high computational complexity. In this paper, a novel BP-neural-network-enabled hybrid precoding algorithm is pr…
Precoding design exploiting deep learning methods has been widely studied for multiuser multiple-input multiple-output (MU-MIMO) systems. However, conventional neural precoding design applies black-box-based neural networks which are less interpretable. In this paper, we propose a deep learning-based precoding method based on an interpretable design of a neural precoding network, namely iPNet. In particular, the iPNet mimics the classic minimum mean-squared error (MMSE) precoding and approximates the matrix inversion in the design of the neural network architecture. Specifically, the proposed …
Aiming at maximizing the achievable sum-rate of wideband multiuser mmWave massive MIMO systems, the hybrid precoding is studied. Since each computation of the achievable sum-rate can be performed only after the analog precoder and digital precoder are both determined, the maximization of the achievable sum-rate has intractable computational complexity. By introducing the interference free (IF) achievable sum-rate, the design of the analog and digital precoders can be decoupled. To avoid the beam conflict and maximize the IF achievable sum-rate, a Hungarian-based codeword selection algorithm is…
Massive multiuser multiple-input multiple-output (MU-MIMO) has been the mainstream technology in fifth-generation wireless systems. To reduce high hardware costs and power consumption in massive MU-MIMO, low-resolution digital-to-analog converters (DAC) for each antenna and radio frequency (RF) chain in downlink transmission is used, which brings challenges for precoding design. To circumvent these obstacles, we develop a model-driven deep learning (DL) network for massive MU-MIMO with finite-alphabet precoding in this article. The architecture of the network is specially designed by unfolding…
Hybrid precoding is a cost-efficient technique for millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) communications. This paper proposes a deep learning approach by using a distributed neural network for hybrid analog-and-digital precoding design with limited feedback. The proposed distributed neural precoding network, called DNet, is committed to achieving two objectives. First, the DNet realizes channel state information (CSI) compression with a distributed architecture of neural networks, which enables practical deployment on multiple users. Specifically, this neural ne…
This study proposes a symbol-level precoding algorithm based on the minimum mean squared error design objective under a strict per antenna power constraint for PSK modulation. The proposed design is then formulated in the standard form of a second-order cone program, allowing for an optimal solution via the interior point method. Numerical results indicate that the proposed design is superior to the existing approaches in terms of bit-error-rate for the low and intermediate SNR regime.
The cell-free MIMO concept relying on hybrid precoding constitutes an innovative technique capable of dramatically increasing the network capacity of millimeter-wave (mmWave) communication systems. It dispenses with the cell boundary of conventional multi-cell MIMO systems, while drastically reducing the power consumption by limiting the number of radio frequency (RF) chains at the access points (APs). In this paper, we aim for maximizing the weighted sum rate (WSR) of mmWave cell-free MIMO systems by conceiving a low-complexity hybrid precoding algorithm. We formulate the WSR optimization pro…
In the context of cell-free massive multi-input multi-output (mMIMO), zero-forcing precoding (ZFP) requires the exchange of instantaneous channel state information and precoded data symbols via a fronthaul network. It causes considerable propagation and processing delays, which degrade performance. This letter analyzes the impact of channel aging on the performance of ZFP in cell-free mMIMO. The aging effects of not only user mobility but also phase noise are considered. Numerical results in terms of per-user spectral efficiency are illustrated.
Base stations in 5G and beyond use advanced antenna systems (AASs), where multiple passive antenna elements and radio units are integrated into a single box. A critical bottleneck of such a system is the digital fronthaul between the AAS and baseband unit (BBU), which has limited capacity. In this paper, we study an AAS used for precoded downlink transmission over a multi-user multiple-input multiple-output (MU-MIMO) channel. First, we present the baseline quantization-unaware precoding scheme created when a precoder is computed at the BBU and then quantized to be sent over the fronthaul. We p…
We consider multi-group multicast precoding designs for cell-free massive multiple-input multiple-output (MIMO) systems. To optimize the transmit and receive beamforming strategies, we focus on minimizing the sum of the maximum mean squared errors (MSEs) over the multicast groups, which is then approximated with the sum MSE to simplify the computation and signaling. We adopt an iterative bi-directional training scheme with uplink and downlink precoded pilots to cooperatively design the multi-group multicast precoders at each base station and the combiners at each user equipment in a distribute…
Extremely large-scale multiple-input-multiple-output (XL-MIMO) is a promising technology for the future sixth-generation (6G) networks to achieve higher performance. In practice, various linear precoding schemes, such as zero-forcing (ZF) and regularized zero-forcing (RZF) precoding, are capable of achieving both large spectral efficiency (SE) and low bit error rate (BER) in traditional massive MIMO (mMIMO) systems. However, these methods are not efficient in extremely large-scale regimes due to the inherent spatial non-stationarity and high computational complexity. To address this problem, w…
In this paper, we investigate a cell-free massive MIMO system with both access points and user equipments equipped with multiple antennas over the Weichselberger Rayleigh fading channel. We study the uplink spectral efficiency (SE) based on a two-layer decoding structure with maximum ratio (MR) or local minimum mean-square error (MMSE) combining applied in the first layer and optimal large-scale fading decoding method implemented in the second layer, respectively. To maximize the weighted sum SE, an uplink precoding structure based on an Iteratively Weighted sum-MMSE (I-WMMSE) algorithm using …
We address the problem of analyzing and classifying in groups the downlink channel environment in a millimeter-wavelength cell, accounting for path loss, multipath fading, and User Equipment (UE) blocking, by employing a hybrid propagation and multipath fading model, thus using accurate inter-group interference modeling. The base station (BS) employs a large Uniform Planar Array (UPA) to facilitate massive Multiple-Input, Multiple-Output (MIMO) communications with high efficiency. UEs are equipped with a single antenna and are distributed uniformly within the cell. The key problem is analyzing…
Most recently, there has been a flurry of research activities on studying how massive MIMO precoding should be designed when the digital-to-analog conversion at the transmitter side is operated by cheap one-bit digital-to-analog converters (DACs). Such research is motivated by the desire to substantially cut down the hardware cost and power consumption of the radio-frequency chain, which is unaffordable in massive MIMO if high-resolution DACs are still used. One-bit MIMO precoding design problems are much harder to solve than their high-resolution DAC counterparts. In our previous work, we dev…
Base station (BS) architectures for massive multi-user (MU) multiple-input multiple-output (MIMO) wireless systems are equipped with hundreds of antennas to serve tens of users on the same time-frequency channel. The immense number of BS antennas incurs high system costs, power, and interconnect bandwidth. To circumvent these obstacles, sophisticated MU precoding algorithms that enable the use of 1-bit DACs have been proposed. Many of these precoders feature parameters that are, traditionally, tuned manually to optimize their performance. We propose to use deep-learning tools to automatically …
In a recent work, we studied a novel precoding design for cell-free networks called team minimum mean-square error (TMMSE) precoding, which rigorously generalizes centralized MMSE precoding to distributed operations based on transmitter-specific channel state information (CSI). Despite its flexibility in handling different cooperation regimes at the CSI sharing level, TMMSE precoding assumes network-wide sharing of the data bearing signals, and hence it is inherently not scalable. In this work, inspired by recent advances on scalable cell-free architectures based on user-centric network cluste…
To enable user diversity and multiplexing gains, a fully digital precoding multiple input multiple output (MIMO) architecture is typically applied. However, a large number of radio frequency (RF) chains make the system unrealistic to low-cost communications. Therefore, a practical three-stage hybrid analogue-digital precoding architecture, occupying fewer RF chains, is proposed aiming for a non-orthogonal IoT signal in low-cost multiuser MIMO systems. The non-orthogonal waveform can flexibly save spectral resources for massive devices connections or improve data rate without consuming extra sp…
In this paper, we consider the precoder design for downlink multiple-input multiple-output (MIMO) rate-splitting multiple access (RSMA) systems. The proposed scheme with simultaneous diagonalization (SD) decomposes the MIMO channel matrices of the users into scalar channels via higher-order generalized singular value decomposition for the common message (CM) and block diagonalization (BD) for the private messages, thereby enabling low-complexity element-by-element successive interference cancellation (SIC) and decoding at the receivers. Furthermore, the proposed SD MIMO-RSMA overcomes a critic…
We propose an optimal low-resolution precoding technique that minimizes the symbol error probability of the users. Unlike existing approaches that rely on QPSK modulation, for the derivation of the minimum symbol error probability objective function the current approach allows for any PSK modulation order. Moreover, the proposed method solves the corresponding discrete optimization problem optimally via a sophisticated branch-and-bound method. Moreover, we propose different approaches based on the greedy search method to compute practical solutions. Numerical simulations confirm the superiorit…
In this paper, a framework of beamspace channel estimation in millimeter wave (mmWave) massive MIMO system is proposed. The framework includes the design of hybrid precoding and combining matrix as well as the search method for the largest entry of over-sampled beamspace receiving matrix. Then based on the framework, three channel estimation schemes including identity matrix approximation (IA)-based scheme, scattered zero off-diagonal (SZO)-based scheme and concentrated zero off-diagonal (CZO)-based scheme are proposed. These schemes together with the existing channel estimation schemes are co…
A novel precoding method based on supervised deep neural networks is introduced for the multiple-input multiple-output Gaussian wiretap channel. The proposed deep learning (DL)-based precoding learns the input covariance matrix through offline training over a large set of input channels and their corresponding covariance matrices for efficient, reliable, and secure transmission of information. Furthermore, by spending time in offline training, this method remarkably reduces the computation complexity in real-time applications. Compared to traditional precoding methods, the proposed DL-based pr…
In this paper, we focus on 1-bit precoding approaches for downlink massive multiple-input multiple-output (MIMO) systems, where we exploit the concept of constructive interference (CI). For both PSK and QAM signaling, we firstly formulate the optimization problem that maximizes the CI effect subject to the requirement of the 1-bit transmit signals. We then mathematically prove that, when employing the CI formulation and relaxing the 1-bit constraint, the majority of the transmit signals already satisfy the 1-bit formulation. Building upon this important observation, we propose a 1-bit precodin…
The massive multiple-input multiple-output (MIMO) transmission technology has recently attracted much attention in the non-geostationary, e.g., low earth orbit (LEO) satellite communication (SATCOM) systems since it can significantly improve the energy efficiency (EE) and spectral efficiency. In this work, we develop a hybrid analog/digital precoding technique in the massive MIMO LEO SATCOM downlink, which reduces the onboard hardware complexity and power consumption. In the proposed scheme, the analog precoder is implemented via a more practical twin-resolution phase shifting (TRPS) network t…
In this paper, we focus on 1-bit precoding for large-scale antenna systems in the downlink based on the concept of constructive interference (CI). By formulating the optimization problem that aims to maximize the CI effect subject to the 1-bit constraint on the transmit signals, we mathematically prove that, when relaxing the 1-bit constraint, the majority of the obtained transmit signals already satisfy the 1-bit constraint. Based on this important observation, we propose a 1-bit precoding method via a partial branch-and-bound (P-BB) approach, where the BB procedure is only performed for the …
Duzce University（杜兹切大学）；University of Hertfordshire（赫特福德大学）；University of Luxembourg（卢森堡大学）
In multi-user millimeter wave (mmWave) multiple-input-multiple-output (MIMO) systems, hybrid precoding is a crucial task to lower the complexity and cost while achieving a sufficient sum-rate. Previous works on hybrid precoding were usually based on optimization or greedy approaches. These methods either provide higher complexity or have sub-optimum performance. Moreover, the performance of these methods mostly relies on the quality of the channel data. In this work, we propose a deep learning (DL) framework to improve the performance and provide less computation time as compared to convention…
Quantized constant envelope (QCE) precoding, a new transmission scheme that only discrete QCE transmit signals are allowed at each antenna, has gained growing research interests due to its ability of reducing the hardware cost and the energy consumption of massive multiple-input multiple-output (MIMO) systems. However, the discrete nature of QCE transmit signals greatly complicates the precoding design. In this paper, we consider the QCE precoding problem for a massive MIMO system with phase shift keying (PSK) modulation and develop an efficient approach for solving the constructive interferen…
Deep Learning-Based Tri-Hybrid Multi-User MIMO Precoding: The Blessing of EM-Reconfigurable Antennas
Beijing Institute of Technology（北京理工大学）；BIT (Zhuhai)（北京理工大学（珠海））；Tsinghua University（清华大学）；Guilin University of Electronic Technology（桂林电子科技大学）；Yangtze Delta Region Academy, BIT (Jiaxing)（北京理工大学（嘉兴）长三角研究院）；Advanced Research Institute of Multidisciplinary Sciences, BIT（北京理工大学前沿交叉科学研究院）
In this paper, we propose a novel joint caching and massive multiple-input multiple-output (MIMO) transmission scheme, referred to as cache-aided massive MIMO, for advanced downlink cellular communications. In addition to reaping the conventional advantages of caching and massive MIMO, the proposed scheme also exploits the side information provided by cached files for interference cancellation at the receivers. This interference cancellation increases the degrees of freedom available for precoding design. In addition, the power freed by the cache-enabled offloading can benefit the transmission…
Precoding for multibeam satellite systems with full frequency reuse in a multi-user multiple-input multiple-output (MU-MIMO) downlink scenario is addressed. A testbed is developed to perform an over-the-air field trial of zero forcing precoding for the spatial multiplexing of two separate video streams over two co-located geostationary satellites. Commercial-off-the-shelf DVB-S2x receivers in two single-antenna user terminals (UTs) are operated to successfully decode two independent video streams. To this end, particular attention is paid to a comprehensive assessment of the practical synchron…
Millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) has been regarded to be an emerging solution for the next generation of communications, in which hybrid analog and digital precoding is an important method for reducing the hardware complexity and energy consumption associated with mixed signal components. However, the fundamental limitations of the existing hybrid precoding schemes is that they have high computational complexity and fail to fully exploit the spatial information. To overcome these limitations, this paper proposes, a deep-learning-enabled mmWave massive MIMO…
Beijing Institute of Technology（北京理工大学）；Nanjing University of Aeronautics and Astronautics（南京航空航天大学）；Beihang University（北京航空航天大学）；University of New South Wales（新南威尔士大学）；Zhejiang University（浙江大学）
Reconfigurable intelligent surface (RIS) can significantly enhance the service coverage of Tera-Hertz massive multiple-input multiple-output (MIMO) communication systems. However, obtaining accurate high-dimensional channel state information (CSI) with limited pilot and feedback signaling overhead is challenging, severely degrading the performance of conventional spatial division multiple access. To improve the robustness against CSI imperfection, this paper proposes a deep learning (DL)-based rate-splitting multiple access (RSMA) scheme for RIS-aided Tera-Hertz multi-user MIMO systems. Specif…
