Electron spin resonance (ESR) is a useful tool to investigate properties of materials in magnetic fields where high spin polarization of target electron spins is required in order to obtain high sensitivity. However, the smaller magnetic fields becomes, the more difficult high polarization is passively obtained by thermalization. Here, we propose to employ a superconducting flux qubit (FQ) to polarize electron spins actively. We have to overcome a large energy difference between the FQ and electron spins for efficient energy transfer among them. For this purpose, we adopt a spin-lock technique on the FQ where the Rabi frequency associated with the spin-locking can match the resonance (Larmor) one of the electron spins. We find that adding dephasing on the spins is beneficial to obtain high polarization of them, because otherwise the electron spins are trapped in dark states that cannot be coupled with the FQ. We show that our scheme can achieve high polarization of electron spins in realistic experimental conditions.
Initializing a set of qubits to a given quantum state is a basic prerequisite for the physical implementation of quantum-information protocols. Here, we discuss the polarization of the electronic and nuclear spin in a single nitrogen vacancy center in diamond. Our initialization scheme uses a sequence of laser, microwave and radio-frequency pulses, and we optimize the pumping parameters of the laser pulse. A rate equation model is formulated that explains the effect of the laser pulse on the spin system. We have experimentally determined the population of the relevant spin states as a function…
We investigate the thermal entanglement in two superconducting qubits for arbitrary interaction strength and ground state frequencies. We calculate the concurrence of the system to quantify the thermal entanglement. We suggest a scheme, where an external tunable coupler qubit sandwich between two superconducting qubits generates entanglement. The behavior of concurrence is analyzed for three different cases, in which we consider the effects of the temperature, the qubit-qubit effective coupling strength, and the qubit frequencies on the thermal entanglement. What deserves mentioning here is th…
We propose a scheme to manipulate a topological spin qubit which is realized with cold atoms in a one-dimensional optical lattice. In particular, by introducing a quantum opto-electro-mechanical interface, we are able to first transfer a superconducting qubit state to an atomic qubit state and then to store it into the topological spin qubit. In this way, an efficient topological quantum memory could be constructed for the superconducting qubit. Therefore, we can consolidate the advantages of both the noise resistance of the topological qubits and the scalability of the superconducting qubits …
In this work we present an algorithm of building an adequate model of polarizing quantum state measurement. This model takes into account chromatic aberration of the basis change transformation caused by the parasitic dispersion of the wave plates crystal and finite radiation spectral bandwidth. We show that the chromatic aberration reduces the amount of information in the measurements results. Using the information matrix approach we estimate the impact of this effect on the qubit state reconstruction fidelity for different values of sample size and spectral bandwidth. We also demonstrate tha…
Quantum algorithms often benefit from the ability to execute multi-qubit (>2) gates. To date such multi-qubit gates are typically decomposed into single- and two-qubit gates, particularly in superconducting qubit architectures. The ability to perform multi-qubit operations in a single step could vastly improve the fidelity and execution time of many algorithms. Here, we propose a single shot method for executing an i-Toffoli gate, a three-qubit gate gate with two control and one target qubit, using currently existing superconducting hardware. We show numerical evidence for a process fidelity o…
Superconducting quantum systems are promising candidates for quantum information processing due to their scalability and design flexibility. However, the existence of defects, fluctuations, and inaccuracies is unavoidable for practical superconducting quantum circuits. In this paper, a sampling-based learning control (SLC) method is used to guide the design of control fields for manipulating superconducting quantum systems. Numerical results for one-qubit systems and coupled two-qubit systems show that the "smart" fields learned using the SLC method can achieve robust manipulation of supercond…
Superconducting quantum circuit is a promising system for building quantum computer. With this system we demonstrate the universal quantum computations, including the preparing of initial states, the single-qubit operations, the two-qubit universal gate operations between arbitrary qubits, the multiple pairs of two-qubit gate operations in parallel, the coupling operations on a group of qubits in parallel, the coupling operations on multiple groups of qubits in parallel, the coupling operations on multiple pairs and multiple groups of qubits in parallel. Within available technology, a universa…
Superconducting qubits are sensitive to a variety of loss mechanisms including dielectric loss from interfaces. By changing the physical footprint of the qubit it is possible to modulate sensitivity to surface loss. Here we show a systematic study of planar superconducting transmons of differing physical footprints to optimize the qubit design for maximum coherence. We find that qubits with small footprints are limited by surface loss and that qubits with large footprints are limited by other loss mechanisms which are currently not understood.
Control the qubit-qubit coupling with double superconducting resonators
Tokyo University of Science（东京科学大学）；RIKEN Center for Quantum Computing (RQC)（理化学研究所量子计算中心）；Fujitsu Limited（富士通有限公司）；National Yang Ming Chiao Tung University（国立阳明交通大学）；National Tsing Hua University（国立清华大学）
A system consisting of two qubits and a resonator is considered in the presence of different sources of noise, bringing to light the possibility for making the two qubits evolve in a synchronized way. A direct qubit-qubit interaction turns out to be a crucial ingredient as well as dissipation processes involving the resonator. The detrimental role of local dephasing of the qubits is also taken into account.
The rapid development in designs and fabrication techniques of superconducting qubits has helped making coherence times of qubits longer. In the near future, however, the radiative decay of a qubit into its control line will be a fundamental limitation, imposing a trade-off between fast control and long lifetime of the qubit. In this work, we successfully break this trade-off by strongly coupling another superconducting qubit along the control line. This second qubit, which we call a Josephson quantum filter (JQF), prevents the qubit from emitting microwave photons and thus suppresses its rela…
We have realized a new interaction between superconducting qubits and a readout cavity that results in the displacement of a coherent state in the cavity, conditioned on the state of the qubit. This conditional state, when it reaches the cavity-following, phase-sensitive amplifier, matches its measured observable, namely the in-phase quadrature. In a setup where several qubits are coupled to the same readout resonator, we show it is possible to measure the state of a target qubit with minimal dephasing of the other qubits. Our results suggest novel directions for faster readout of superconduct…
We present a circuit construction for a new fixed-frequency superconducting qubit and show how it can be scaled up to a grid with strictly local interactions. The circuit QED realization we propose implements $σ_z$-type coupling between a superconducting qubit and any number of $LC$ resonators. The resulting \textit{longitudinal coupling} is inherently different from the usual $σ_x$-type \textit{transverse coupling}, which is the one that has been most commonly used for superconducting qubits. In a grid of fixed-frequency qubits and resonators with a particular pattern of always-on interaction…
Superconducting quantum technologies require qubit systems whose properties meet several often conflicting requirements, such as long coherence times and high anharmonicity. Here, we provide an engineering framework based on a generalized superconducting qubit model in the flux regime, which abstracts multiple circuit design parameters and thereby supports design optimization across multiple qubit properties. We experimentally investigate a special parameter regime which has both high anharmonicity ($\sim\!1$GHz) and long quantum coherence times ($T_1\!=\!40\!-\!80\,\mathrm{μs}$ and $T_\mathrm…
Measurement for qubits plays a key role in quantum computation. Current methods for classifying states of single qubit in a superconducting multi-qubit system produce fidelities lower than expected due to the existence of crosstalk, especially in case of frequency crowding. Here, We make the digital signal processing (DSP) system used in measurement into a shallow neural network and train it to be an optimal classifier to reduce the impact of crosstalk. The experiment result shows the crosstalk-induced readout error deceased by 100% after a 3-second optimization applied on the 6-qubit supercon…
Topological insulators have inspired the study with various quantum simulators. Exploiting the tunability of the qubit frequency and qubit-qubit coupling, we show that a superconducting qubit chain can simulate various topological band models. When the system is restricted to the single-spin excitation subspace, the Su-Schrieffer-Heeger (SSH) model can be equivalently simulated by alternating the coupling strength between neighboring qubits. The existence of topological edge states in this qubit chain is demonstrated in the quench dynamics after the first qubit is excited. This excitation prop…
We demonstrate fast two-qubit gates using a parity-violated superconducting qubit consisting of a capacitively-shunted asymmetric Josephson-junction loop under a finite magnetic flux bias. The second-order nonlinearity manifesting in the qubit enables the interaction with a neighboring single-junction transmon qubit via first-order inter-qubit sideband transitions with Rabi frequencies up to 30~MHz. Simultaneously, the unwanted static longitudinal~(ZZ) interaction is eliminated with ac Stark shifts induced by a continuous microwave drive near-resonant to the sideband transitions. The average f…
Quantum adiabatic transfer is widely used in quantum computation and quantum simulation. However, the transfer speed is limited by the quantum adiabatic approximation condition, which hinders its application in quantum systems with a short decoherence time. Here we demonstrate quantum adiabatic state transfers that jump along geodesics in one-qubit and two-qubit superconducting transmons. This approach possesses the advantages of speed, robustness, and high fidelity compared with the usual adiabatic process. Our protocol provides feasible strategies for improving state manipulation and gate op…
We report on the coherence of Greenberger-Horne-Zeilinger (GHZ) states comprised of up to 8 qubits in the IBM ibmqx5 16-qubit quantum processor. In particular, we evaluate the coherence of GHZ states with $N=1,\ldots,8$ qubits, as a function of a delay time between state creation and measurement. We find that the decay in coherence occurs at a rate that is linear in the number of qubits. This is consistent with a model in which the dominant noise affecting the system is uncorrelated across qubits.
Superconducting qubits with in-situ tunable properties are important for constructing a quantum computer. Qubit tunability, however, often comes at the expense of increased noise sensitivity. Here, we propose a flux-tunable superconducting qubit that minimizes the dephasing due to magnetic flux noise by engineering controllable flux "sweet spots" at frequencies of interest. This is realized by using a SQUID with asymmetric Josephson junctions shunted by a superinductor formed from an array of junctions. Taking into account correlated global and local noises, it is possible to improve dephasing…
High-quality-factor 3D cavities in superconducting circuits are ideal candidates for bosonic logical qubits as their fidelity is limited only by the low photon loss rate. However, the transmon qubits that are used to manipulate bosonic qubits result in the emergence of additional relaxation and dephasing channels. In this work, a numerical study is performed to elucidate the effect of the various loss channels on the performance of logical gates on a bosonic qubit. A gate error model is developed that encapsulates the loss mechanisms for arbitrary gate operations and predicts experimentally ac…
High fidelity single shot qubit state readout is essential for many quantum information processing protocols. In superconducting quantum circuit, the qubit state is usually determined by detecting the dispersive frequency shift of a microwave cavity from either transmission or reflection. In this paper, we demonstrate the use of constructive interference between the transmitted and reflected signal to optimize the qubit state readout, with which we find a better resolved state discrimination and an improved qubit readout fidelity. As a simple and convenient approach, our scheme can be combined…
Fixed-frequency qubits can suffer from always-on interactions that inhibit independent control. Here, we address this issue by experimentally demonstrating a superconducting architecture using qubits that comprise of two capacitively-shunted Josephson junctions connected in series. Historically known as tunable coupling qubits (TCQs), such two-junction qubits support two modes with distinct frequencies and spatial symmetries. By selectively coupling only one type of mode and using the other as our computational basis, we greatly suppress crosstalk between the data modes while permitting all-mi…
An open question in designing superconducting quantum circuits is how best to reduce the full circuit Hamiltonian which describes their dynamics to an effective two-level qubit Hamiltonian which is appropriate for manipulation of quantum information. Despite advances in numerical methods to simulate the spectral properties of multi-element superconducting circuits, the literature lacks a consistent and effective method of determining the effective qubit Hamiltonian. Here we address this problem by introducing a novel local basis reduction method. This method does not require any ad hoc assumpt…
Entangling superconducting quantum processors via light would enable new means of secure communication and distributed quantum computing. However, transducing quantum signals between these disparate regimes of the electromagnetic spectrum remains an outstanding goal, and interfacing superconducting qubits with electro-optic transducers presents significant challenges due to the deleterious effects of optical photons on superconductors. Moreover, many remote entanglement protocols require multiple qubit gates both preceding and following the upconversion of the quantum state, and thus an ideal …
Towards realising larger scale quantum algorithms, the ability to prepare sizeable multi-qubit entangled states with full qubit control is used as a benchmark for quantum technologies. We investigate the extent to which entanglement is found within a prepared graph state on the 20-qubit superconducting quantum computer, IBM Q Poughkeepsie. We prepared a graph state along a path consisting of all twenty qubits within Poughkeepsie and performed full quantum state tomography on all groups of four connected qubits along this path. We determined that each pair of connected qubits was inseparable an…
