Superelastic shape-memory alloys (SMAs) are unique smart materials with a considerable energy dissipation potential for dynamic loadings with varying strain-rates. The energy dissipation depends on the latent heat generated by the austenitic-martensitic transformation and the convection of that heat. Due to the thermomechanical coupling, the martensitic nucleation stress level and thus the propagation of martensitic phase fronts strongly depends on the material temperature. High strain-rate interferes with the release of the latent heat to the environment and determines quantity, position and propagation of martensitic transformation bands. Lastly, high strain-rate reduces the hysteresis surface. The propagation velocity and quantity of martensitic bands have an impact on martensitic phase stability. The degree of atomic disorder and accordingly the change in entropy influences the reverse phase transformation from martensite to austenite. In other words, the stability of the martensitic state affects the stress level of the reverse transformation. However, in phenomenological superelastic SMA models, which are used to simulate energy dissipation behavior, the effects of the rate-dependent entropy change are not considered in particular. To incorporate the rate-dependent entropy change, we improved a one-dimensional numerical model by introducing an additional control variable in the free energy formulation for solid-solid phase transformation of superelastic SMAs. In this model, the observed effects of the strain-rate on the reverse transformation are taken into account by calculating the rate-dependent entropy change. A comparison of the numerical results with the experimental data shows that the model calculates the dynamic superelastic hysteresis of SMAs more accurately.
Suppression of acoustic emission during superelastic tensile cycling of polycrystalline Ni$_{50.4}$Ti$_{49.6}$
研究了超弹性/弹热合金Ni $_{50.4}$ Ti $_{49.6}$(at. %)使用拉伸应变驱动。我们使用两个独立的AE传感器,以定位AE事件,并专注于从机械试验机的夹具中产生的AE的贡献。在第一次机械加载期间存在显著的AE活动,这主要是由于在正向马氏体转变期间宽Lüders样带的成核和生长(使用可见光和红外(IR)辐射成像)导致晶间相互作用的持续变化。AE活动被抑制在随后的反向马氏体相变卸载,并在连续的加载/卸载循环,Lüders样带变窄,修改晶粒间的相互作用,以更小的程度。在第一次加载后,我们发现与马氏体相变相关的AE活动很弱,我们认为这是因为Ni-Ti中的弹性各向异性和应变不相容性较低。我们还发现,AE活动变得较弱的机械循环,由于保留马氏体的增加。
Design of a V-Ti-Ni alloy with superelastic nano-precipitates
应力诱发的马氏体相变使亚稳合金能够表现出增强的应变硬化能力,从而改善可成形性和韧性。然而,正如从相变诱发塑性(TRIP)钢中所熟知的,由于其固有的脆性,所得的马氏体可以限制延展性和疲劳寿命。在这项工作中,我们探索了一种合金设计策略,利用应力诱导马氏体相变,但不保留马氏体相。这种策略是基于超弹性纳米析出物的引入,其在初始应力诱导的正向转变后表现出反向转变。为此,利用从头算模拟和热力学计算,我们设计并制备了V45 Ti 30 Ni 25(at%)合金。在该合金中,TiNi作为纳米沉淀物均匀分布在韧性富V基心立方(bcc)β基质内,以及作为较大的基质相存在。我们使用各种扫描电子显微镜(SEM)和透射电子显微镜(TEM)的方法,其特征在于所产生的合金的微观结构。通过拉伸试验证明了合金的体力学性能,并且通过原位TEM微柱压缩实验、原位高能衍射同步加速器循环拉伸试验、压痕实验和差示扫描量热法实验证实了TiNi形貌中的可逆转变。观察到的转变途径和变量的影响相稳定性进行了严格的讨论
Accelerated design of linear-superelastic Ti-Nb nanocomposite alloys with ultralow modulus via high-throughput phase-field simulations and machine learning
Finely Tunable Thermal Expansion of NiTi by Stress-Induced Martensitic Transformation and Thermomechanical Training
Korea Advanced Institute of Science and Technology(韩国科学技术院);Massachusetts Institute of Technology(麻省理工学院);Korea University(高丽大学);Inha University(仁荷大学);University of Stuttgart(斯图加特大学)