Asteroid surfaces are subjected to mechanical weathering processes that result in the development and evolution of regolith. Two proposed mechanisms--impact bombardment and thermal fatigue--have been proposed as viable and dominant weathering processes. Previously, we compiled and estimated thermal inertias of several hundred asteroids (mostly in the main-belt) for which we determined dependencies on temperature, diameter, and rotation period. In this work, we estimate grain sizes of asteroid regoliths from this large thermal inertia dataset using thermal conductivity models. Following our previous work we perform multi-variate linear model fits to the grain size dataset and quantify its dependency on diameter and rotation period. We find that the best-fit model fit indicates that asteroid grain sizes are inversely dependent on object size for <10 km asteroids and exhibits no relationship above this size cutoff. Rotation period and grain size show a positive relationship when the rotation period is greater than ~5 hr, and an inverse relationship below this rotation period. We conclude that both impact weathering and thermal fatigue are significant regolith evolution mechanisms. Furthermore, we run post-hoc t-tests between spectral groups to identify compositional differences among our asteroid set. Notably, suspected metal-rich, M-type and E-type asteroids have larger than expected grain sizes, and P-types have distinctly smaller grains than other groups
The thermal inertia of an asteroid is an indicator of the thermophysical properties of the regolith and is determined by the size of grains on the surface. Previous thermophysical modeling studies of asteroids have identified or suggested that object size, rotation period, and heliocentric distance (a proxy for temperature) as important factors that separately influence thermal inertia. In this work we present new thermal inertias for 239 asteroids and model all three factors in a multi-variate model of thermal inertia. Using multi-epoch infrared data of a large (239) set of objects observed b…
By means of a varied-shape thermophysical model (VS-TPM) of Hanus et al. (2015) that takes into account asteroid shape and pole uncertainties, we analyze the thermal IR data acquired by the NASA's WISE satellite of about 300 asteroids with derived convex shape models. We utilize publicly available convex shape models and rotation states as input for the TPM. For more than one hundred asteroids, the TPM gives us an acceptable fit to the thermal IR data allowing us to report their size, thermal inertia, surface roughness or visible geometric albedo. This work more than doubles the number of aste…
Thermophysical Models (TPMs), which have proven to be a powerful tool in the interpretation of the infrared emission of asteroid surfaces, typically make use of a priori obtained shape models and spin axes for use as input boundary conditions. We test then employ a TPM approach - under an assumption of an ellipsoidal shape - that exploits the combination of thermal multi-wavelength observations obtained at pre- and post-opposition. Thermal infrared data, when available, at these observing circumstances are inherently advantageous in constraining thermal inertia and sense of spin, among other p…
Themis family is one of the largest and oldest asteroid populations in the main-belt. Water-ice may widely exist on the parent body (24) Themis. In this work, we employ the Advanced Thermophysical Model as well as mid-infrared measurements from NASA's Wide-Field Infrared Survey Explorer to explore thermal parameters of 20 Themis family members. Here we show that the average thermal inertia and geometric albedo are ~$39.5\pm26.0 ~\rm J m^{-2} s^{-1/2} K^{-1}$ and $0.067\pm0.018$, respectively. The family members have a relatively moderate roughness fraction on their surfaces. We find that the r…
(349) Dembowska, a large, bright main-belt asteroid, has a fast rotation and oblique spin axis. It may have experienced partial melting and differentiation. We constrain Dembowska's thermophysical properties, e.g., thermal inertia, roughness fraction, geometric albedo and effective diameter within 3$σ$ uncertainty of $Γ=20^{+12}_{-7}\rm~Jm^{-2}s^{-0.5}K^{-1}$, $f_{\rm r}=0.25^{+0.60}_{-0.25}$, $p_{\rm v}=0.309^{+0.026}_{-0.038}$, and $D_{\rm eff}=155.8^{+7.5}_{-6.2}\rm~km$, by utilizing the Advanced Thermophysical Model (ATPM) to analyse four sets of thermal infrared data obtained by IRAS, AKA…
In this work, we investigate the surface thermophysical properties (thermal emissivity, thermal inertia, roughness fraction and geometric albedo) of asteroid (99942) Apophis, using the currently available thermal infrared observations of CanariCam on Gran Telescopio CANARIAS and far-infrared data by PACS of Herschel, on the basis of the Advanced thermophysical model. We show that the thermal emissivity of Apophis should be wavelength dependent from $8.70~μm$ to $160~μm$, and the maximum emissivity may arise around $20~μm$ similar to that of Vesta. Moreover, we further derive the thermal inerti…
The thermal inertia of an asteroid's surface can provide insight into regolith properties, such as the presence of a layer of fine dust, the density and thermal conductivity of a rocky surface, and, together with other observational data, mineralogy. Knowledge of the surface characteristics of asteroids is important for planetary defense initiatives and the extraction of resources ("asteroid mining"). A simple means of estimating asteroid thermal inertia has been proposed by Harris & Drube, which is suitable for application to large sets of thermal-infrared observational data, such as those ob…
The near-Earth asteroid (3200) Phaethon is an intriguing object: its perihelion is at only 0.14 au and is associated with the Geminid meteor stream. We aim to use all available disk-integrated optical data to derive a reliable convex shape model of Phaethon. By interpreting the available space- and ground-based thermal infrared data and Spitzer spectra using a thermophysical model, we also aim to further constrain its size, thermal inertia, and visible geometric albedo. We applied the convex inversion method to the new optical data obtained by six instruments and to previous observations. The …
Thermophysical models allow for improved constraints on the physical and thermal surface properties of asteroids beyond what can be inferred from more simple thermal modeling, provided a sufficient number of observations is available. We present thermophysical modeling results of observations from the NEOWISE mission for two near-Earth asteroids which are the targets of the DESTINY+ flyby mission: (3200) Phaethon and (155140) 2005 UD. Our model assumes a rotating, cratered, spherical surface, and employs a Monte Carlo Markov Chain to explore the multi-dimensional parameter space of the fit. We…
Optical lightcurves can be used for the shape and spin reconstruction of asteroids. Due to unknown albedo, these models are scale-free. When thermal infrared data are available, they can be used for scaling the shape models and for deriving thermophysical properties of the surface by applying a thermophysical model. We introduce a new method of simultaneous inversion of optical and thermal infrared data that allows the size of an asteroid to be derived along with its shape and spin state. The method optimizes all relevant parameters (shape and its size, spin state, light-scattering properties,…
Thermal infrared emission and thermophysical modeling techniques are powerful tools in deciphering the surface properties of asteroids. The near-Earth asteroid (3200) Phaethon is an active asteroid with a very small perihelion distance and is likely the source of the Geminid meteor shower. We estimate and interpret the thermal inertia of this extraordinary asteroid using observations that span ten distinct sightings. The variation in thermal inertia over these sightings is inconsistent with the expected temperature-dependent thermal inertia theorized from radiative heat transfer within the reg…
In this paper, we investigate thermophysical characteristics of near-Earth asteroid (341843) 2008 EV5, based on our improved Advanced Thermal Physical Model (ATPM) by considering the contribution of sunlight-reflection for rough surface, along with four wavebands observations from Wide-field Infrared Survey Explorer (WISE) and the radar-derived shape model. Here we derive that 2008 EV5 has a relatively low thermal inertia of $Γ=110 _{-12}^{+40}\rm~J m^{-2} s^{-1/2} K^{-1}$ but a high roughness fraction. The geometric albedo and effective diameter are then constrained to be $p_v=0.095_{-0.003}^…
Results from the TESS mission showed that previous studies strngly underestimated the number of slow rotators, revealing the importance of studying those asteroids. For most slowly rotating asteroids (P > 12), no spin and shape model is available because of observation selection effects. This hampers determination of their thermal parameters and accurate sizes. We continue our campaign in minimising selection effects among main belt asteroids. Our targets are slow rotators with low light-curve amplitudes. The goal is to provide their scaled spin and shape models together with thermal inertia, …
The rapid accumulation of thermal infrared observations and shape models of asteroids has led to increased interest in thermophysical modeling. Most of these infrared observations are unresolved. We consider what fraction of an asteroid's surface area contributes the bulk of the emitted thermal flux for two model asteroids of different shapes over a range of thermal parameters. The resulting observed surface in the infrared is generally more fragmented than the area observed in visible wavelengths, indicating high sensitivity to shape. For objects with low values of the thermal parameter, smal…
In planetary science, surface roughness is regarded to be a measure of surface irregularity at small spatial scales, and causes the thermal-infrared beaming effect (i.e. re-radiation of absorbed sunlight back towards to the Sun). Typically, surface roughness exhibits a degeneracy with thermal inertia when thermophysical models are fitted to disc-integrated thermal-infrared observations of asteroids because of this effect. In this work, it is demonstrated how surface roughness can be constrained for near-Earth asteroid (433) Eros (i.e. the target of NASA's NEAR Shoemaker mission) when using the…
Thermal-infrared measurements of asteroids are crucial for deriving the objects' sizes, albedos, and also the thermophysical properties of the surface material. Depending on the available data, a range of simple to complex thermal models are applied to achieve specific science goals. However, testing these models is often a difficult process and the uncertainties of the derived parameters are not easy to estimate. Here, we make an attempt to verify a widely accepted thermophysical model (TPM) against unique thermal infrared (IR), full-disk, and well-calibrated measurements of the Moon. The dat…
The Hilda asteroids are among the least studied populations in the asteroid belt, despite their potential importance as markers of Jupiter's migration in the early Solar system. We present new mid-infrared observations of two notable Hildas, (1162) Larissa and (1911) Schubart, obtained using the Faint Object infraRed CAmera for the SOFIA Telescope (FORCAST), and use these to characterise their thermal inertia and physical properties. For (1162) Larissa, we obtain an effective diameter of \textcolor{black}{46.5$^{+2.3}_{-1.7}$~km, an albedo of 0.12~$\pm$~0.02, and a thermal inertia of 15$^{+10}…
Knowledge of the surface thermal inertia of an asteroid can provide insight into surface structure: porous material has a lower thermal inertia than rock. We develop a means to estimate thermal inertia values of asteroids and use it to show that thermal inertia appears to increase with spin period in the case of main-belt asteroids (MBAs). Similar behavior is found on the basis of thermophysical modeling for near-Earth objects (NEOs). We interpret our results in terms of rapidly increasing material density and thermal conductivity with depth, and provide evidence that thermal inertia increases…
The available set of spin and shape modelled asteroids is strongly biased against slowly rotating targets and those with low lightcurve amplitudes. As a consequence of these selection effects, the current picture of asteroid spin axis distribution, rotation rates, or radiometric properties, might be affected too. To counteract these selection effects, we are running a photometric campaign of a large sample of main belt asteroids omitted in most previous studies. We determined synodic rotation periods and verified previous determinations. When a dataset for a given target was sufficiently large…
Deriving thermophysical properties such as thermal inertia from thermal infrared observations provides useful insights into the structure of the surface material on planetary bodies. The estimation of these properties is usually done by fitting temperature variations calculated by thermophysical models to infrared observations. For multiple free model parameters, traditional methods such as Least-Squares fitting or Markov-Chain Monte-Carlo methods become computationally too expensive. Consequently, the simultaneous estimation of several thermophysical parameters together with their correspondi…
In this work, we investigate the size, thermal inertia, surface roughness and geometric albedo of 10 Vesta family asteroids by using the Advanced Thermophysical Model (ATPM), based on the thermal infrared data acquired by mainly NASA's Wide-field Infrared Survey Explorer (WISE). Here we show that the average thermal inertia and geometric albedo of the investigated Vesta family members are 42 $\rm J m^{-2} s^{-1/2} K^{-1}$ and 0.314, respectively, where the derived effective diameters are less than 10 km. Moreover, the family members have a relatively low roughness fraction on their surfaces. T…
Physical Characterization of Asteroid (16583) Oersted Combining Stellar Occultation and Photometric Data
Charles University, Faculty of Mathematics and Physics, Institute of Astronomy(查理大学数学物理学院天体物理研究所);Université Côte d’Azur, CNRS-Lagrange, Observatoire de la Côte d’Azur(蔚蓝海岸大学法国国家科学研究中心拉格朗日实验室蔚蓝海岸天文台);School of Physics and Astronomy, University of Leicester(莱斯特大学物理与天文学院);Department of Physics, The Catholic University of America(美国天主教大学物理系);Astrophysics Science Division, NASA Goddard Space Flight Center(NASA戈达德太空飞行中心天体物理学科学部);Center for Research and Exploration in Space Science and Technology, NASA/GSFC(NASA/戈达德太空飞行中心空间科学与技术研究探索中心);SETI Institute, Carl Sagan Center(SETI研究所卡尔·萨根中心);Unistellar
Context. Earlier work suggests that slowly rotating asteroids should have higher thermal inertias than faster rotators because the heat wave penetrates deeper into the sub-surface. However, thermal inertias have been determined mainly for fast rotators due to selection effects in the available photometry used to obtain shape models required for thermophysical modelling (TPM). Aims. Our aims are to mitigate these selection effects by producing shape models of slow rotators, to scale them and compute their thermal inertia with TPM, and to verify whether thermal inertia increases with the rotatio…
Photometric lightcurves were also obtained for 14 of them during the Spitzer observations to provide the context of the observations and reliable estimates of their absolute magnitudes. The extracted mid-IR spectra were analyzed using a modified standard thermal model (STM) and a thermophysical model (TPM) that takes into account the shape and geometry of the large primary at the time of the Spitzer observation. We derived a reliable estimate of the size, albedo, and beaming factor for each of these asteroids, representing three main taxonomic groups: C, S, and X. For large (volume-equivalent …
Thermophysical characterization of the potentially hazardous near-Earth object 2024 YR4
Max-Planck-Institut für extraterrestrische Physik (MPE)(德国马克斯·普朗克地外物理学研究所);University of Helsinki(赫尔辛基大学);Massachusetts Institute of Technology(麻省理工学院);Space Telescope Science Institute(太空望远镜科学研究所);Johns Hopkins University Applied Physics Laboratory(约翰斯·霍普金斯大学应用物理实验室);Astronomical Institute, Academy of Sciences of the Czech Republic(捷克科学院天文研究所);ESA NEO Coordination Centre(欧洲空间局近地天体协调中心);Jet Propulsion Laboratory, California Institute of Technology(加州理工学院喷气推进实验室)
Thermal Infrared Observations of Asteroid (99942) Apophis with Herschel
小行星阿波菲斯(99942)是一颗具有潜在危险的小行星。我们用赫歇尔空间天文台的PACS仪器在70、100和160微米处对这颗小行星进行了远红外观测。这些照片是在2013年1月和3月的两个时间点,在一次近距离接触地球时拍摄的。这些第一次对阿波菲斯的热测量是在反对派之前和之后以类似的相位角进行的。我们进行了详细的热物理模型分析,通过使用自旋和形状模型最近来自应用2周期傅立叶级数方法,以及校准光度观测的大样本。我们发现,翻滚的小行星阿波菲斯有一个细长的形状,平均直径为375 $^{+14}_{-10}$米(等体积球体)和几何V带的半径为0.30 $^{+0.05}_{-0.06}$。我们发现热惯性在250-800 Jm $^{-2}$ s $^{-0.5}$ K $^{-1}$范围内(最佳解为600 Jm $^{-2}$ s $^{-0.5}$ K $^{-1}$),这可以用低传导性细风化层与表面高热惯性的较大岩石和巨石的混合物来解释。热惯性和其他与(25143)丝川的相似之处表明阿波菲斯可能也有一个碎石堆结构。如果我们结合新的尺寸值与丝川式的密度和孔隙度的假设,我们估计的质量在4.4和6.2 10 $^{10}$公斤,这是超过2-3倍比以前的估计。我们预计,新得出的属性将影响情景研究和影响阿波菲斯的长期轨道预测。
Near-Earth Asteroids (NEAs) are a key testbed for investigations into planet formation, asteroid dynamics, and planetary defense initiatives. These studies rely on understanding NEA sizes, albedo distributions, and regolith properties. Simple thermal models are a commonly used method for determining these properties, however they have inherent limitations due to the simplifying assumptions they make about asteroid shapes and properties. With the recent collapse of the Arecibo Telescope and a decrease of direct size measurements, as well as future facilities such as LSST and NEO Surveyor coming…
The recent close approach of the NEA (3200) Phaethon offered a rare opportunity to obtain high-quality observational data. We used the newly obtained optical light curves to improve the spin and shape model of Phaethon and to determine its surface physical properties derived by thermophysical modeling. We also used the available astrometric observations of Phaethon, including those obtained by the Arecibo radar and the Gaia spacecraft, to constrain the secular drift of the orbital semimajor axis. This constraint allowed us to estimate the bulk density by assuming that the drift is dominated by…
Eos family was created during a catastrophic impact about 1.3 Gyr ago. Rotation states of individual family members contain information about the history of the whole population. We aim to increase the number of asteroid shape models and rotation states within the Eos collision family, as well as to revise previously published shape models from the literature. Such results can be used to constrain theoretical collisional and evolution models of the family, or to estimate other physical parameters by a thermophysical modeling of the thermal infrared data. We use all available disk-integrated op…
133P/Elst-Pizarro is the firstly recognized main-belt comet, but we still know little about its nucleus. Firstly we use mid-infrared data of Spitzer-MIPS, Spitzer-IRS and WISE to estimate its effective diameter $D_{\rm eff}=3.9^{+0.4}_{-0.3}$ km, geometric albedo $p_{\rm v}=0.074\pm0.013$ and mean Bond albedo $A_{\rm eff,B}=0.024\pm0.004$. The albedo is used to compute 133P's temperature distribution, which shows significant seasonal variation, especially polar regions, ranging from $\sim40$ to $\sim200$ K. Based on current activity observations, the maximum water gas production rate is estima…
The near-Earth objects (NEOs) (3200) Phaethon and (155140) 2005 UD are thought to share a common origin, with the former exhibiting dust activity at perihelion that is thought to directly supply the Geminid meteor stream. Both of these objects currently have very small perihelion distances, which results in them having perihelion temperatures of or exceeding 1000 K. The current activity from Phaethon is relevant to the destruction of NEOs close to the Sun, which most likely has produced meteor streams linked to asteroids in the past. We model the past thermal characteristics of Phaethon and 20…
Infrared measurements of asteroids are crucial for the determination of physical and thermal properties of individual objects, and for the understanding of the small-body populations in the solar system as a whole. But standard radiometric methods can only be applied if the orbit of an object is known, hence its position at the time of the observation. We present MIRI observations of the outer-belt asteroid 10920 and an unknown object, detected in all 9 MIRI bands in close proximity to 10920. We developed a new method "STM-ORBIT" to interpret the multi-band measurements without knowing the obj…