Electrochemistry experiments have established that the capacitance of electrode-electrolyte interfaces is much larger for good metals such as gold and platinum than for carbon-based materials. Despite the development of elaborate electrode interaction potentials, to date molecular dynamics simulations were not able to capture this effect. Here we show that changing the width of the Gaussian charge distribution used to represent the atomic charges in gold is an effective way to tune its metallicity. Larger Gaussian widths lead to a capacitance of aqueous solutions (pure water and 1 molar NaCl) in good agreement with recent ab initio molecular dynamics results. For pure water, the increase in the capacitance is not accompanied with structural changes, while in the presence of salt the Na$^+$ cations tend to adsorb significantly on the surface. For a strongly metallic gold electrode, these ions can even form inner sphere complexes on hollow sites of the surface.
Superdielectric behavior was observed in pastes made of high surface area alumina filled to the level of incipient wetness with water containing dissolved sodium chloride (table salt). In some cases the dielectric constants were greater than 10^10.
At ambient pressure, sodium, chlorine, and their only known compound NaCl, have well-understood crystal structures and chemical bonding. Sodium is a nearly-free-electron metal with the bcc structure. Chlorine is a molecular crystal, consisting of Cl2 molecules. Sodium chloride, due to the large electronegativity difference between Na and Cl atoms, has highly ionic chemical bonding, with stoichiometry 1:1 dictated by charge balance, and rocksalt (B1-type) crystal structure in accordance with Pauling's rules. Up to now, Na-Cl was thought to be an ultimately simple textbook system. Here, we show …
Sodium chloride (NaCl), or rocksalt, is well characterized at ambient pressure. Due to the large electronegativity difference between Na and Cl atoms, it has highly ionic chemical bonding, with stoichiometry 1:1 dictated by charge balance, and B1-type crystal structure. Here, by combining theoretical predictions and diamond anvil cell experiments we show that new materials with different stoichiometries emerge at pressure as low as 20 GPa. Compounds such us Na3Cl, Na2Cl, Na3Cl2, NaCl3 and NaCl7 are theoretically stable and have unusual bonding and electronic properties. To test this prediction…
Recent developments in higher-order topological phases have elucidated on the relationship between nontrivial multipole moments in the bulk and the emergence of fractionally quantized charges at the boundary. Here, we put on the table a proposal of the three-dimensional octupole insulator with fractionally quantized corner charges $\pm e/8$: sodium chloride, commonly known as table salt. The fractional quantization of the corner charge is unaffected by the quantum fluctuation of the electric charge per ion, as we demonstrate explicitly with ab initio calculations. We further show that the elec…
Recent studies have pointed the importance of polyelectrolyte assembly in the elaboration of innovative nanomaterials. Beyond their structures, many important questions on the thermodynamics of association remain to be answered. Here, we investigate the complexation between poly(diallyldimethylammonium chloride) (PDADMAC) and poly(sodium acrylate) (PANa) chains using a combination of three techniques: isothermal titration calorimetry (ITC), static and dynamic light scattering and electrophoresis. Upon addition of PDADMAC to PANa or vice-versa, the results obtained by the different techniques a…
The high-pressure and high-temperature behaviors of sodium chloride (NaCl) have the fundamental and application significance to the high pressure physics and chemistry. To explore the reactivity of NaCl at high pressure and high temperature, we compressed the NaCl samples to pressures up to 85 GPa and heated them to a temperature of 1800 by using the diamond anvil cell and the double-sided laser heating technology. Our investigation of Raman spectroscopy shows that NaCl decomposes to NaCl3 with orthorhombic Pnma structure plus possible Na3Cl with tetragonal P4/mmm structure above 31 GPa. It sh…
The physical properties of ultrathin NaCl overlayers on the stepped Cu(311) surface have been characterized using scanning tunneling microscopy (STM) and spectroscopy, and density functional calculations. Simulations of STM images and differential conductance spectrum were based on the Tersoff-Hamann approximation for tunneling with corrections for the modified tunneling barrier at larger voltages and calculated Kohn-Sham states. Characteristic features observed in the STM images can be directly related to calculated electronic and geometric properties of the overlayers. The measured apparent …
We present the molecular simulation study of the behavior of water and sodium chloride solution confined in lizardite asbestos nanotube which is a typical example of hydrophilic confinement. The local structure, orientational and dynamic properties are studied. It is shown that the diffusion coefficient drops about two orders of magnitude comparing to the bulk case, and water in lizardite asbestos tubes experiences vitrification rather then crystallization upon cooling in accordance with the results for some other hydrophilic confinements. The behavior of sodium chloride solutions also conside…
The utilization of alkali salts, such as NaCl and KI, have enabled the successful growth of large single domain and fully coalesced polycrystalline two-dimensional (2D) transition metal dichalcogenide layers. However, the impact of alkali salts on photonic and electronic properties are not fully established. In this work, we report alkali-free epitaxy of MoS2 on sapphire and benchmark the properties against alkali-assisted growth of MoS2. This study demonstrates that although NaCl can dramatically increase the domain size of monolayer MoS2 by 20 times, it can also induce strong optical and ele…
Phosphate glasses for bioresorbable implants display dissolution rates that vary significantly with composition, however currently their mechanisms of dissolution are not well understood. Based on this systematic study we present new insights into these mechanisms. Two-stage dissolution was observed, with time dependence initially parabolic and later linear, and a two-stage model was developed to describe this behaviour. Dissolution was accelerated by lower Ca concentration in the glass, and lower pH in the dissolution medium. A new dissolution mechanism is proposed, involving an initial stage…
We investigate physical origin of ergodicity breaking in an aqueous colloidal dispersion of synthetic hectorite clay, LAPONITE(R), by performing dissolution and rheological experiments with monovalent salt and tetrasodium pyrophosphate solution. We also study the effect of interface, nitrogen and paraffin oil on the same. Dissolution experiments carried out for dispersions with both the interfaces show similar results. However, for samples with nitrogen interface, all the effects are observed to get expedited in time compared to paraffin oil interface. When kept in contact with water, 1.5 wt. …
In this work, the solvation and electronic structure of the aqueous chloride ion solution was investigated using Density Functional Theory (DFT) based \textit{ab initio} molecular dynamics (AIMD). From an analysis of radial distribution functions, coordination numbers, and solvation structures, we found that exact exchange ($E_{\rm xx}$) and non-local van der Waals (vdW) interactions effectively \textit{weaken} the interactions between the Cl$^-$ ion and the first solvation shell. With a Cl-O coordination number in excellent agreement with experiment, we found that most configurations generate…
The performance of gold nanoparticles (NPs) in applications depends critically on the structure of the NP-solvent interface, at which the electrostatic surface polarization is one of the key characteristics that affects hydration, ionic adsorption, and electrochemical reactions. Here, we demonstrate significant effects of explicit metal polarizability on the solvation and electrostatic properties of bare gold NPs in aqueous electrolyte solutions of sodium salts of various anions (Cl$^-$, BF$_4$$^-$, PF$_6$$^-$, Nip$^-$(nitrophenolate), and 3- and 4-valent hexacyanoferrate (HCF)), using classic…
When a thin stream of aqueous sodium alginate is extruded into a reacting calcium chloride bath, it polymerizes into a soft elastic tube that spontaneously forms helical coils due to the ambient fluid drag. We quantify the onset of this drag-induced instability and its nonlinear evolution using experiments, and explain the results using a combination of scaling, theory and simulations. By co-extruding a second (internal) liquid within the aqueous sodium alginate jet and varying the rates of co-extrusion of the two liquids, as well as the diameter of the jet, we show that we can tune the local …
