OxyJet:基于文丘里管的低成本精密持续气道正压(CPAP)系统的设计和评价
OxyJet: Design and Evaluation of A Low-Cost Precision Venturi Based Continuous Positive Airway Pressure (CPAP) System
摘要:
2019冠状病毒病大流行已使世界上许多国家的医院系统紧张,尤其是发展中国家。在许多资源匮乏的医院,患有严重低氧血症的新冠肺炎患者接受各种形式的低流量氧气治疗(0-15 L/min),包括鼻插管、Hudson面罩、文丘里面罩和非再呼吸面罩等接口。当15 L/min的纯氧流量对患者来说不够时,治疗指南建议将无创正压通气(NIPPV)或高流量鼻氧合(HFNO)作为下一阶段的治疗。然而,在低资源医院的普通病房中管理HFNO是困难的,这归因于若干因素,包括操作困难、电功率插座不可用以及频繁维护。因此,在许多情况下,患者在普通病房中接受的最高护理水平是使用非再呼吸器面罩提供15 L/min的氧气。由于重症监护病房(ICU)床位短缺,这是一个主要问题,因为中间形式的治疗根本无法以负担得起的成本提供。为了解决这一差距,我们开发了一种专门为低资源医院设计的低成本CPAP系统。该设备是一种基于文丘里管的精密流量发生器,能够提供高达60 L/min的流量。该装置利用由高压氧气驱动的喷射泵的机械原理,通过夹带大气空气来增加体积流速。使用双流量计,吸入氧分数(FiO 2)可达到40 - 100%。CPAP由传统的22 mm呼吸回路、非通气式CPAP面罩和呼气末正压(PEEP)阀组成,可提供5-20 cm H2O之间的正压。该设备使用当地的3D打印和车间设施制造。
英文摘要:
The Covid-19 pandemic has strained the hospital systems in many countries in the world, especially in developing countries. In many low-resource hospitals, severely ill hypoxemic Covid-19 patients are treated with various forms of low-flow oxygen therapy (0-15 L/min), including interfaces such as a nasal cannula, Hudson mask, venturi-mask, and non-rebreather masks. When 15L/min of pure oxygen flow is not sufficient for the patient, treatment guidelines suggest non-invasive positive pressure ventilation (NIPPV) or high-flow nasal oxygenation (HFNO) as the next stage of treatment. However, administering HFNO in the general wards of a low-resource hospital is difficult due to several factors, including difficulty in operation, unavailability of electric power outlets, and frequent maintenance. Therefore, in many cases, the highest level of care a patient receives in the general ward is 15L/min of oxygen on a Non-Rebreather Mask. With a shortage of Intensive Care Unit (ICU) beds, this is a major problem since intermediate forms of treatments are simply not available at an affordable cost. To address this gap, we have developed a low-cost CPAP system specifically designed for low-resource hospitals. The device is a precision venturi-based flow-generator capable of providing up to 60L/min of flow. The device utilizes the mechanics of a jet pump driven by high-pressure oxygen to increase the volumetric flow rate by entraining atmospheric air. The fraction of inspired oxygen (FiO2) can be attained between 40 - 100% using a dual-flowmeter. Consisting of a traditional 22mm breathing circuit, a non-vented CPAP mask, and a Positive End-Expiratory Pressure (PEEP) valve, the CPAP can provide positive pressures between 5-20 cm H2O. The device is manufactured using local 3D printing and workshop facilities.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。