In this letter, we consider single-cell, single-user systems wherein uplink and downlink user equipment communicate with a full-duplex relay. Due to the near-far problem, the self-interference (SI) can be 100-1000x the received signal power. In this context, we consider the adaptive Least Mean Squares (LMS) algorithm to estimate the SI channel and then subtract the SI from the desired received signal before the analog-to-digital converter (ADC). We measure the robustness of this technique in terms of bit error rate (BER) and spectral efficiency.
In full-duplex systems, due to the strong self-interference signal, system nonlinearities become a significant limiting factor that bounds the possible cancellable self-interference power. In this paper, a self-interference cancellation scheme for full-duplex orthogonal frequency division multiplexing systems is proposed. The proposed scheme increases the amount of cancellable self-interference power by suppressing the distortion caused by the transmitter and receiver nonlinearities. An iterative technique is used to jointly estimate the self-interference channel and the nonlinearity coefficie…
We present an experiment-based characterization of passive suppression and active self-interference cancellation mechanisms in full-duplex wireless communication systems. In particular, we consider passive suppression due to antenna separation at the same node, and active cancellation in analog and/or digital domain. First, we show that the average amount of cancellation increases for active cancellation techniques as the received self-interference power increases. Our characterization of the average cancellation as a function of the self-interference power allows us to show that for a constan…
Recent experimental results have shown that full-duplex communication is possible for short-range communications. However, extending full-duplex to long-range communication remains a challenge, primarily due to residual self-interference even with a combination of passive suppression and active cancellation methods. In this paper, we investigate the root cause of performance bottlenecks in current full-duplex systems. We first classify all known full-duplex architectures based on how they compute their cancelling signal and where the cancelling signal is injected to cancel self-interference. B…
This paper discusses transmission strategies for dealing with the problem of self-interference in multi-hop wireless networks in which the nodes communicate in a full- duplex mode. An information theoretic study of the simplest such multi-hop network: the two-hop source-relay-destination network, leads to a novel transmission strategy called structured self-interference cancellation (or just "structured cancellation" for short). In the structured cancellation strategy the source restrains from transmitting on certain signal levels, and the relay structures its transmit signal such that it can …
This paper presents the performance analysis of the self-interference cancellation (SIC) methods in full-duplex largescale multiple-input multiple-output systems. To mitigate selfinterference (SI), we assume that the full duplex-base station (BS) uses SI-subtraction or spatial suppression. Analytical and numerical results confirm that the SI-subtraction outperforms the spatial suppression for SIC in a perfect channel estimation case. It is also concluded that the uplink and overall ergodic rates performance of the spatial suppression is respectively better than those of the SI-subtraction in a…
This paper considers a cellular system with a full-duplex base station and half-duplex users. The base station can activate one user in uplink or downlink (half-duplex mode), or two different users one in each direction simultaneously (full-duplex mode). Simultaneous transmissions in uplink and downlink causes self-interference at the base station and uplink-to-downlink interference at the downlink user. Although uplink-to-downlink interference is typically treated as noise, it is shown that successive interference decoding and cancellation (SIC mode) can lead to significant improvement in net…
Full-duplex systems are expected to double the spectral efficiency compared to conventional half-duplex systems if the self-interference signal can be significantly mitigated. Digital cancellation is one of the lowest complexity self-interference cancellation techniques in full-duplex systems. However, its mitigation capability is very limited, mainly due to transmitter and receiver circuit's impairments. In this paper, we propose a novel digital self-interference cancellation technique for full-duplex systems. The proposed technique is shown to significantly mitigate the self-interference sig…
In this paper we propose and analyze a novel self-interference cancellation structure for in-band MIMO full-duplex transceivers. The proposed structure utilizes reference receiver chains to obtain reference signals for digital self-interference cancellation, which means that all the transmitter-induced nonidealities will be included in the digital cancellation signal. To the best of our knowledge, this type of a structure has not been discussed before in the context of full-duplex transceivers. First, we will analyze the overall achievable performance of the proposed cancellation scheme, while…
One of the main bottlenecks in practical full-duplex systems is the oscillator phase noise, which bounds the possible cancellable self-interference power. In this paper, a digitaldomain self-interference cancellation scheme for full-duplex orthogonal frequency division multiplexing systems is proposed. The proposed scheme increases the amount of cancellable selfinterference power by suppressing the effect of both transmitter and receiver oscillator phase noise. The proposed scheme consists of two main phases, an estimation phase and a cancellation phase. In the estimation phase, the minimum me…
This paper presents a novel RF circuit architecture for self-interference cancellation in inband full-duplex radio transceivers. The developed canceller is able to provide wideband cancellation with waveform bandwidths in the order of 100 MHz or beyond and contains also self-adaptive or self-healing features enabling automatic tracking of time-varying self-interference channel characteristics. In addition to architecture and operating principle descriptions, we also provide actual RF measurements at 2.4 GHz ISM band demonstrating the achievable cancellation levels with different bandwidths and…
This article addresses the modeling and cancellation of self-interference in full-duplex direct-conversion radio transceivers, operating under practical imperfect radio frequency (RF) components. Firstly, detailed self-interference signal modeling is carried out, taking into account the most important RF imperfections, namely transmitter power amplifier nonlinear distortion as well as transmitter and receiver IQ mixer amplitude and phase imbalances. The analysis shows that after realistic antenna isolation and RF cancellation, the dominant self-interference waveform at receiver digital baseban…
This paper addresses the analysis of oscillator phase-noise effects on the self-interference cancellation capability of full-duplex direct-conversion radio transceivers. Closed-form solutions are derived for the power of the residual self-interference stemming from phase noise in two alternative cases of having either independent oscillators or the same oscillator at the transmitter and receiver chains of the full-duplex transceiver. The results show that phase noise has a severe effect on self-interference cancellation in both of the considered cases, and that by using the common oscillator i…
Incorporating full duplex operation in Multiple Input Multiple Output (MIMO) systems provides the potential of boosting throughput performance. However, the hardware complexity of the analog self-interference canceller scales with the number of transmit and receive antennas, thus exploiting the benefits of analog cancellation becomes impractical for full duplex MIMO transceivers. In this paper, we present a novel architecture for the analog canceller comprising of reduced number of taps (tap refers to a line of fixed delay and variable phase shifter and attenuator) and simple multiplexers for …
This paper addresses the modeling and digital cancellation of self-interference in in-band full-duplex (FD) transceivers with multiple transmit and receive antennas. The self-interference modeling and the proposed nonlinear spatio-temporal digital canceller structure takes into account, by design, the effects of I/Q modulator imbalances and power amplifier (PA) nonlinearities with memory, in addition to the multipath self-interference propagation channels and the analog RF cancellation stage. The proposed solution is the first cancellation technique in the literature which can handle such a se…
Incorporating full duplex operation in Multiple Input Multiple Output (MIMO) systems provides the potential of boosting throughput performance. However, the hardware complexity of the analog self-interference canceller in emerging full duplex MIMO designs mostly scales with the number of transmit and receive antennas, thus exploiting the benefits of analog cancellation becomes impractical for full duplex MIMO transceivers, even for moderate number of antennas. In this paper, we present two novel architectures for the analog canceller comprising of reduced number of cancellation elements, compa…
Full-duplex (FD) technology is envisaged as a key component for future mobile broadband networks due to its ability to boost the spectral efficiency. FD systems can transmit and receive simultaneously on the same frequency at the expense of residual self-interference (SI) and additional interference to the network compared with half-duplex (HD) transmission. This paper analyzes the performance of wireless networks with FD multi-antenna base stations (BSs) and HD user equipments (UEs) using stochastic geometry. Our analytical results quantify the success probability and the achievable spectral …
This paper investigates the throughput for wireless network with full-duplex radios using stochastic geometry. Full-duplex (FD) radios can exchange data simultaneously with each other. On the other hand, the downside of FD transmission is that it will inevitably cause extra interference to the network compared to half-duplex (HD) transmission. Moreover, the residual self-interference has negative effects on the network throughput. In this paper, we focus on a wireless network of nodes with both HD and FD capabilities and derive and optimize the throughput in such a network. Our analytical resu…
Full-duplex systems require very strong self-interference cancellation in order to operate correctly and a significant part of the self-interference signal is due to non-linear effects created by various transceiver impairments. As such, linear cancellation alone is usually not sufficient and sophisticated non-linear cancellation algorithms have been proposed in the literature. In this work, we investigate the use of a neural network as an alternative to the traditional non-linear cancellation method that is based on polynomial basis functions. Measurement results from a full-duplex testbed de…
In full-duplex systems, oscillator phase noise (PN) problem is considered the bottleneck challenge that may face the self-interference cancellation (SIC) stage especially when orthogonal frequency division multiplexing (OFDM) transmission scheme is deployed. Phase noise degrades the SIC performance significantly, if not mitigated before or during the SIC technique. The presence of the oscillator phase noise has different impacts on the transmitted data symbol like common phase error (CPE) and inter-carrier interference (ICI). However, phase noise can be estimated and mitigated digitally in eit…
In this paper we provide an overview regarding the feasibility of in-band full-duplex transceivers under imperfect RF components. We utilize results and findings from the recent research on full-duplex communications, while introducing also transmitter-induced thermal noise into the analysis. This means that the model of the RF impairments used in this paper is the most comprehensive thus far. By assuming realistic parameter values for the different transceiver components, it is shown that IQ imaging and transmitter-induced nonlinearities are the most significant sources of distortion in in-ba…
One of the promising technologies for LTE Evolution is full-duplex radio, an innovation is expected to double the spectral efficiency. To realize full-duplex in practice, the main challenge is overcoming self-interference, and to do so, researchers have developed self-interference cancellation techniques. Since most wireless transceivers use power amplifiers, especially in cellular systems, researchers have revealed the importance of nonlinear self-interference cancellation. In this article, we first explore several nonlinear digital self-interference cancellation techniques. We then propose a…
Recently, several working implementations of in--band full--duplex wireless systems have been presented, where the same node can transmit and receive simultaneously in the same frequency band. The introduction of such a possibility at the physical layer could lead to improved performance but also poses several challenges at the MAC layer. In this paper, an innovative mechanism of channel contention in full--duplex OFDM wireless networks is proposed. This strategy is able to ensure efficient transmission scheduling with the result of avoiding collisions and effectively exploiting full--duplex o…
Self-interference (SI) significantly limits the performance of full-duplex (FD) radio devices if not properly cancelled. State-of-the-art SI cancellation (SIC) techniques at the receive chain implicitly set an upper bound on the transmit power of the device. This paper starts from this observation and proposes a transmit beamforming design for FD multiple-antenna radios that: i) leverages the inherent SIC capabilities at the receiver and the channel state information; and ii) exploits the potential of multiple antennas in terms of spatial SIC. The proposed solution not only maximizes the throu…
Massive multiple-input multiple-output (MIMO) and full-duplex (FD) are promising candidates for achieving the spectral efficiency to meet the needs of 5G communications. One essential key to realizing practical FD massive MIMO systems is how to effectively mitigate the self-interference (SI). Conventionally, however, the performance comparison of different SI methods by reflecting the actual channel characteristics was insufficient in the literature. Accordingly, this paper presents a performance analysis of SI cancellation (SIC) methods in FD massive MIMO systems. Analytical and numerical res…
In future full-duplex communications, the cancellation of self-interference (SI) arising from hardware non-idealities will play an important role in the design of mobile-scale devices. To this end, we introduce an optimal digital SI cancellation solution for shared-antenna-based direct-conversion transceivers. To establish that the underlying widely linear signal model is not adequate for strong transmit signals, the impact of various circuit imperfections, including power amplifier (PA) distortion, frequency-dependent I/Q imbalance, quantization noise and thermal noise, on the performance of …
Self-interference (SI) is the main obstacle to full-duplex radios. To overcome the SI, researchers have proposed several analog and digital domain self-interference cancellation (SIC) techniques. How well the digital cancellation works depends on the results of analog cancellation. Therefore, to analyze overall SIC performance, one should do so in an integrated manner. In this paper, we build a simulator that can analyze the performance of analog and digital SIC techniques. Through this simulator, we can analyze the overall SIC performance within various system parameters such as the resolutio…
In this letter, we propose a modified version of Fast Independent Component Analysis (FICA) algorithm to solve the self-interference cancellation (SIC) problem in In-band Full Duplex (IBFD) communication systems. The complex mixing problem is mathematically formulated to suit the real-valued blind source separation (BSS) algorithms. In addition, we propose a method to estimate the ambiguity factors associated with ICA lumped together with the channels and residual separation error. Experiments were performed on an FD platform where FICA-based BSS was applied for SIC in the frequency domain. Ex…
In this paper, we propose a joint transceiver beamforming design to simultaneously mitigate self-interference (SI) and partial inter-node interference for full-duplex multiple-input and multiple-output ad-hoc network, and then derive the transmission capacity upper bound (TC-UB) for the corresponding network. Condition on a specified transceiver antenna's configuration, we allow the SI effect to be cancelled at transmitter side, and offer an additional degree-of-freedom at receiver side for more inter-node interference cancellation. In addition, due to the proposed beamforming design and imper…
Although the hardware complexity of the analog self-interference canceller in full duplex Multiple Input Multiple Output (MIMO) designs does not necessarily scale with the number of transceiver antennas, exploiting the benefits of analog cancellation in massive MIMO systems with hundreds of antenna elements is still quite impractical. Hybrid Analog and Digital (A/D) beamforming architectures have been lately considered as a candidate technology for realizing massive MIMO transceivers with very large number of antenna elements, but with much fewer numbers of Radio Frequency (RF) chains. In this…
In-band full-duplex (IBFD) operation has emerged as an attractive solution for increasing the throughput of wireless communication systems and networks. With IBFD, a wireless terminal is allowed to transmit and receive simultaneously in the same frequency band. This tutorial paper reviews the main concepts of IBFD wireless. Because one the biggest practical impediments to IBFD operation is the presence of self-interference, i.e., the interference caused by an IBFD node's own transmissions to its desired receptions, this tutorial surveys a wide range of IBFD self-interference mitigation techniq…
Security is a critical issue in full duplex (FD) communication systems due to the broadcast nature of wireless channels. In this paper, joint design of information and artificial noise beamforming vectors is proposed for the FD simultaneous wireless information and power transferring (FD-SWIPT) systems with loopback self-interference cancellation. To guarantee high security and energy harvesting performance of the FD-SWIPT system, the proposed design is formulated as a secrecy rate maximization problem under energy transfer rate constraints. Although the secrecy rate maximization problem is no…
The paper studies the suppression of cross-tier inter-cell interference (ICI) generated by a macro base station (MBS) to pico user equipments (PUEs) in heterogeneous networks (HetNets). Different from existing ICI avoidance schemes such as enhanced ICI cancellation (eICIC) and coordinated beamforming, which generally operate at the MBS, we propose a full duplex (FD) assisted ICI cancellation (fICIC) scheme, which can operate at each pico BS (PBS) individually and is transparent to the MBS. The basic idea of the fICIC is to apply FD technique at the PBS such that the PBS can send the desired si…
Full-duplex transmission comprises the ability to transmit and receive at the same time on the same frequency band. It allows for more efficient utilization of spectral resources, but raises the challenge of strong self-interference (SI). Cancellation of SI is generally implemented as a multi-stage approach. This work proposes a novel adaptive SI cancellation algorithm in the digital domain and a comprehensive analysis of state-of-the-art adaptive cancellation techniques. Inspired by recent progress in acoustic echo control, we introduce a composite state-space model of the nonlinear SI channe…
We consider a full-duplex decode-and-forward system, where the wirelessly powered relay employs the time-switching protocol to receive power from the source and then transmit information to the destination. It is assumed that the relay node is equipped with two sets of antennas to enable full-duplex communications. Three different interference mitigation schemes are studied, namely, 1) optimal 2) zero-forcing and 3) maximum ratio combining/maximum ratio transmission. We develop new outage probability expressions to investigate delay-constrained transmission throughput of these schemes. Our ana…
This work proposes an analytical framework to study how relay selection strategies perform in half- and full-duplex deployments by combining renewal theory and stochastic geometry. Specifically, we assume that the network nodes -- operating in either half- or full-duplex mode -- are scattered according to a two-dimensional homogeneous Poisson point process to compute the relay selection cost by using a semi-Markov process. Our results show: ($i$) fixed relay outperforms the reactive option in either cases, ($ii$) the performance of both reactive and fixed relay strategies depends on the self-i…
The challenge to in-band full-duplex wireless communication is managing self-interference. Many designs have employed spatial isolation mechanisms, such as shielding or multi-antenna beamforming, to isolate the self-interference wave from the receiver. Such spatial isolation methods are effective, but by confining the transmit and receive signals to a subset of the available space, the full spatial resources of the channel be under-utilized, expending a cost that may nullify the net benefit of operating in full-duplex mode. In this paper we leverage an antenna-theory-based channel model to ana…
As a key in cognitive radio networks (CRNs), dynamic spectrum access needs to be carefully designed to minimize the interference and delay to the \emph{primary} (licensed) users. One of the main challenges in dynamic spectrum access is to determine when the \emph{secondary} (unlicensed) users can use the spectrum. In particular, when the secondary user is using the spectrum, if the primary user becomes active to use the spectrum, it is usually hard for the secondary user to detect the primary user instantaneously, thus causing unexpected interference and delay to primary users. The secondary u…
The challenge to in-band full-duplex wireless communication is managing self-interference. Many designs have employed spatial isolation mechanisms, such as shielding or multi-antenna beamforming, to isolate the self-interference wave from the receiver. Such spatial isolation methods are effective, but by confining the transmit and receive signals to a subset of the available space, the full spatial resources of the channel be under-utilized, expending a cost that may nullify the net benefit of operating in full-duplex mode. In this paper we leverage an antenna-theory-based channel model to ana…
In-band full duplex wireless is of utmost interest to future wireless communication and networking due to great potentials of spectrum efficiency. IBFD wireless, however, is throttled by its key challenge, namely self-interference. Therefore, effective self-interference cancellation is the key to enable IBFD wireless. This paper proposes a real-time non-linear self-interference cancellation solution based on deep learning. In this solution, a self-interference channel is modeled by a deep neural network (DNN). Synchronized self-interference channel data is first collected to train the DNN of t…
The recent significant progress in realizing full-duplex~(FD) systems has opened up a promising avenue for improving quality of service (QoS) and quality of experience (QoE) in future wireless networks. There is an urgent need to address the diverse set of challenges regarding different aspects of FD network design, theory, and development. In addition to the self-interference cancelation signal processing algorithms, network protocols such as resource management are also essential in the practical design and implementation of FD wireless networks. This article aims to present the latest devel…
In this paper, the impact of in-band full-duplex (IBFD) wireless communications on secret key generation via physical layer channel state information is investigated. A key generation strategy for IBFD wireless devices to increase the rate of generated secret keys over multipath fading channels is proposed. Conventionally, due to the half-duplex (HD) constraint on wireless transmissions, sensing simultaneous reciprocal channel measurements is not possible, which leads to a degraded key generation rate. However, with the advent of IBFD wireless devices, the legitimate nodes can sense the shared…
Full-duplex systems are expected to achieve 100% rate improvement over half-duplex systems if the self-interference signal can be significantly mitigated. In this paper, we propose the first full-duplex system utilizing Multi-Reconfigurable Antenna (MRA) with ?90% rate improvement compared to half-duplex systems. MRA is a dynamically reconfigurable antenna structure, that is capable of changing its properties according to certain input configurations. A comprehensive experimental analysis is conducted to characterize the system performance in typical indoor environments. The experiments are pe…
The conventional design of cellular systems prescribes the separation of uplink and downlink transmissions via time-division or frequency-division duplex. Recent advances in analog and digital domain self-interference interference cancellation challenge the need for this arrangement and open up the possibility to operate base stations, especially low-power ones, in a full-duplex mode. As a means to cope with the resulting downlink-to-uplink interference among base stations, this letter investigates the impact of the Cloud Radio Access Network (C-RAN) architecture. The analysis follows an infor…
In this paper, we analytically study the regime in which practical full-duplex systems can achieve larger rates than an equivalent half-duplex systems. The key challenge in practical full-duplex systems is uncancelled self-interference signal, which is caused by a combination of hardware and implementation imperfections. Thus, we first present a signal model which captures the effect of significant impairments such as oscillator phase noise, low-noise amplifier noise figure, mixer noise, and analog-to-digital converter quantization noise. Using the detailed signal model, we study the rate gain…
We model the self-interference in a multiple input single output (MISO) full-duplex two-way channel and evaluate the achievable rate region. We formulate the boundary of the achievable rate region termed as the Pareto boundary by a family of coupled, non-convex optimization problems. Our main contribution is decoupling and reformulating the original non-convex optimization problems to a family of convex semidefinite programming problems. For a MISO full-duplex two-way channel, we prove that beamforming is an optimal transmission strategy which can achieve any point on the Pareto boundary. Furt…
In this paper, we investigate power efficient resource allocation algorithm design for multiuser wireless communication systems employing a full-duplex (FD) radio base station for serving multiple half-duplex (HD) downlink and uplink users simultaneously. We propose a multi-objective optimization framework for achieving two conflicting yet desirable system design objectives, i.e., total downlink transmit power minimization and total uplink transmit power minimization, while guaranteeing the quality-of-service of all users. To this end, the weighted Tchebycheff method is adopted to formulate a …
In this paper, the effects of oscillator phase-noise with arbitrary spectral characteristics on self-interference cancellation capability of a full-duplex radio transceiver are addressed, and design considerations are given for oscillator designers for optimized PLL design for full-duplex radio application. The paper first gives a full-duplex transceiver model that inherently mitigates most of the phase-noise effect from the self-interference signal. The remaining effect of the phase noise is then analysed. Closed-form solutions for the self-interference power are then derived. In the simulati…
In this work, we propose a covert communication scheme where the transmitter attempts to hide its transmission to a full-duplex receiver, from a warden that is to detect this covert transmission using a radiometer. Specifically, we first derive the detection error rate at the warden, based on which the optimal detection threshold for its radiometer is analytically determined and its expected detection error rate over wireless fading channels is achieved in a closed-form expression. Our analysis indicates that the artificial noise deliberately produced by the receiver with a random transmit pow…
This paper presents a number of fundamental properties of full-duplex radio for secure wireless communication under some simple and practical conditions. In particular, we consider the fields of secrecy capacity of a wireless channel between two single-antenna radios (Alice and Bob) against an unknown number of single-antenna eavesdroppers (Eves) from unknown locations, where Alice and Bob have zero knowledge (except a model) of the large-scale-fading channel-state-information of Eves. These properties show how the secrecy capacity is distributed in terms of the location of any Eve, how the op…
This paper studies optimal resource allocation in the wireless-powered communication network (WPCN), where one hybrid access-point (H-AP) operating in full-duplex (FD) broadcasts wireless energy to a set of distributed users in the downlink (DL) and at the same time receives independent information from the users via time-division-multiple-access (TDMA) in the uplink (UL). We design an efficient protocol to support simultaneous wireless energy transfer (WET) in the DL and wireless information transmission (WIT) in the UL for the proposed FD-WPCN. We jointly optimize the time allocations to the…
In this paper, we study a three-node full-duplex network, where a base station is engaged in simultaneous up- and downlink communication in the same frequency band with two half-duplex mobile nodes. To reduce the impact of inter- node interference between the two mobile nodes on the system capacity, we study how an orthogonal side-channel between the two mobile nodes can be leveraged to achieve full-duplex-like multiplexing gains. We propose and characterize the achievable rates of four distributed full-duplex schemes, labeled bin-and- cancel, compress-and-cancel, estimate-and-cancel and decod…
This paper considers the problem of maximizing the sum-rate for simultaneous wireless information and power transfer (SWIPT) in a full-duplex bi-directional communication system subject to energy harvesting and transmit power constraints at both nodes. We investigate the optimum design of the receive power splitters and transmit powers for SWIPT in full-duplex mode. Exploiting rate-split method, an iterative algorithm is derived to solve the non-convex problem. The effectiveness of the proposed algorithm is justified through numerical simulations.
In this paper, we consider a wireless communication network with a full-duplex hybrid access point (HAP) and a set of wireless users with energy harvesting capabilities. The HAP implements the full-duplex through two antennas: one for broadcasting wireless energy to users in the downlink and one for receiving independent information from users via time-division-multiple-access (TDMA) in the uplink at the same time. All users can continuously harvest wireless power from the HAP until its transmission slot, i.e., the energy causality constraint is modeled by assuming that energy harvested in the…
In this paper, we present and study a digital-controlled method, called SoftNull, to enable full-duplex in many-antenna systems. Unlike most designs that rely on analog cancelers to suppress self-interference, SoftNull relies on digital transmit beamforming to reduce self-interference. SoftNull does not attempt to perfectly null self-interference, but instead seeks to reduce self-interference sufficiently to prevent swamping the receiver's dynamic range. Residual self-interference is then cancelled digitally by the receiver. We evaluate the performance of SoftNull using measurements from a 72-…
Hardware imperfections can significantly reduce the performance of full-duplex wireless systems by introducing non-idealities and random effects that make it challenging to fully suppress self-interference. Previous research has mostly focused on analyzing the impact of hardware imperfections on full-duplex systems, based on simulations and theoretical models. In this paper, we follow a measurement-based approach to experimentally identify and isolate these hardware imperfections leading to residual self-interference in full-duplex nodes. Our measurements show the important role of images aris…
The optimal resource allocation scheme in a full-duplex Wireless Powered Communication Network (WPCN) composed of one Access Point (AP) and two wireless devices is analyzed and derived. AP operates in a full-duplex mode and is able to broadcast wireless energy signals in downlink and receive information data in uplink simultaneously. On the other hand, each wireless device is assumed to be equipped with Radio-Frequency (RF) energy harvesting circuitry which gathers the energy sent by AP and stores it in a finite capacity battery. The harvested energy is then used for performing uplink data tra…
