We introduce a new isometric strain model for the study of the dynamics of cloth garments in a moderate stress environment, such as robotic manipulation in the neighborhood of humans. This model treats textiles as surfaces which are inextensible, admitting only isometric motions. Inextensibility is imposed in a continuous setting, prior to any discretization, which gives consistency with respect to re-meshing and prevents the problem of locking even with coarse meshes. The simulations of robotic manipulation using the model are compared to the actual manipulation in the real world, finding that the error between the simulated and real position of each point in the garment is lower than 1cm in average, even when a coarse mesh is used. Aerodynamic contributions to motion are incorporated to the model through the virtual uncoupling of the inertial and gravitational mass of the garment. This approach results in an accurate, as compared to reality, description of cloth motion incorporating aerodynamic effects by using only two parameters.
A Hyperspectral Imaging Guided Robotic Grasping System
Department of Mechanical and Automation Engineering, T-Stone Robotics Institute, The Chinese University of Hong Kong, Hong Kong SAR(机械与自动化工程系,T-Stone机器人研究所,香港中文大学,香港特别行政区);School of Instrumentation and Optoelectronic Engineering, Beihang University(仪器与光电工程学院,北航大学)
Unfolding the Literature: A Review of Robotic Cloth Manipulation
KTH Royal Institute of Technology(瑞典皇家理工学院);Carnegie Mellon University(卡内基梅隆大学);Institut de Robòtica i Informàtica Industrial, CSIC-UPC(西班牙国家研究委员会-加泰罗尼亚理工大学机器人与工业自动化研究所);University of Copenhagen(哥本哈根大学)
Knitting Robots: A Deep Learning Approach for Reverse-Engineering Fabric Patterns
Bharti School of Engineering and Computer Science, Laurentian University(劳伦森大学巴蒂工程与计算机科学学院);Shanghai International Fashion Education Centre(上海国际时尚教育中心)
Dexterous Manipulation of Deformable Objects via Pneumatic Gripping: Lifting by One End
Osaka University(大阪大学);National Institute of Advanced Industrial Science and Technology (AIST)(日本国立先进工业科学技术研究所(AIST));The University of Texas at Austin(得克萨斯大学奥斯汀分校);Ternopil Ivan Puluj National Technical University(捷尔诺波尔伊万·普卢伊国立技术大学);UT Southwestern Medical Center(德克萨斯大学西南医学中心)
Synthetic Data Generation and Vision-based Wrinkle and Keypoint Detection for Bimanual Cloth Manipulation
Department of Engineering, University of Luxembourg(卢森堡大学工程系);School of Electrical and Electronic Engineering, Nanyang Technological University(南洋理工大学电子与电气工程学院);Université de Lorraine, Arts et Metiers Institute of Technology, LCFC(洛林大学,艺术与工艺技术学院,LCFC)
Digital Twin Driven Textile Classification and Foreign Object Recognition in Automated Sorting Systems
Institute of Smart Systems Technologies(智能系统技术研究所);University of Klagenfurt(克雷格弗特大学);AAU SAL USE Laboratory(AAU SAL USE实验室);Silicon Austria Labs(硅 Austria 实验室)
Model Predictive Control for Dynamic Cloth Manipulation: Parameter Learning and Experimental Validation
Institut de Robòtica i Informàtica Industrial, CSIC-UPC(西班牙国家研究委员会-加泰罗尼亚理工大学工业机器人与信息技术研究所);Universitat Politècnica de Catalunya - BarcelonaTECH(加泰罗尼亚理工大学-巴塞罗那理工学院)
机器人布料操作是自主机器人系统的一个相关的挑战性问题。作为纺织品的高度可变形对象可以在其操纵期间采用多种配置和形状。因此,机器人不仅要了解当前的布的配置,而且还能够预测未来可能的行为的布。本文解决了间接控制纺织品对象的某些点的配置的问题,通过施加动作的对象的其他部分,通过使用模型预测控制(MPC)的策略,这也允许预见间接控制点的行为。所设计的控制器找到最优控制信号以获得期望的未来目标配置。在本文中探索的情况下,考虑跟踪一个参考轨迹与下角的一个正方形的一块布抓住它的上角。为此,我们提出并验证了一个线性布料模型,该模型允许实时的解决MPC相关的优化问题。强化学习(RL)技术被用于学习所提出的布料模型的最优参数,并且还用于调整所得到的MPC。在仿真中获得精确的跟踪结果后,在实际机器人上实现并执行了完整的控制方案,即使在恶劣的条件下也能获得精确的跟踪。虽然观察到的总误差达到5 cm标记,但对于30 x 30 cm的布,分析显示MPC对该值的贡献小于30%。