Intelligent reflecting surfaces (IRSs) have been introduced into wireless communications systems due to their great potential to smartly customize and reconfigure radio propagation environments in a cost-effective manner. Despite the promising advantages of IRSs, academic research on IRSs is still in its infancy. In particular, the design and analysis of IRS-assisted wireless communication systems critically depend on an accurate and tractable modeling of the IRS. In this article, we first present and compare three IRS models, namely the conventional independent diffusive scatterer-based model, physics-based model, and impedance network-based model, in terms of their accuracy, tractability, and hardware complexity. Besides, a new framework based on partitioning the IRS into tiles and employing codebooks of transmission modes is introduced to enable scalable IRS optimization. Then, we investigate the impact of the three considered IRS models on system design, where several crucial technical challenges for the efficient design of IRS-assisted wireless systems are identified and the corresponding solutions are unraveled. Furthermore, to illustrate the properties of the considered models and the efficiency of the proposed solution concepts, IRS-assisted secure wireless systems and simultaneous wireless information and power transfer (SWIPT) systems are studied in more detail. Finally, several promising future research directions for IRS-assisted wireless systems are highlighted.
Intelligent reflecting surface (IRS) is an emerging technology for wireless communication composed of a large number of low-cost passive devices with reconfigurable parameters, which can reflect signals with a certain phase shift and is capable of building programmable communication environment. In this paper, to avoid the high hardware cost and energy consumption in spatial modulation (SM), an IRS-aided hybrid secure SM (SSM) system with a hybrid precoder is proposed. To improve the security performance, we formulate an optimization problem to maximize the secrecy rate (SR) by jointly optimiz…
This paper proposes a novel relay-aided intelligent reconfigurable surface (IRS) architecture for future wireless communication systems. The proposed architecture, which consists of two side-by-side intelligent surfaces connected via a full-duplex relay, has the potential of achieving the promising gains of intelligent surfaces while requiring much smaller numbers of reflecting elements. Consequently, the proposed IRS architecture needs significantly less channel estimation and beam training overhead and provides higher robustness compared to classical IRS approaches. Further, thanks to dividi…
Intelligent reconfigurable surface (IRS) is being seen as a promising technology for 6G wireless networks. The IRS can reconfigure the wireless propagation environment, which results in significant performance improvement of wireless communications. In this paper, we analyze the performance of bandwidth-efficient quadrature amplitude modulation (QAM) techniques for IRS-assisted wireless communications over Rayleigh fading channels. New closed-form expressions of the generic average symbol error rate (ASER) for rectangular QAM, square QAM and cross QAM schemes are derived. Moreover, simplified …
This paper considers the use of an intelligent reconfigurable surface (IRS) to aid wireless communication systems. The main goal is to compare this emerging technology with conventional decode-and-forward (DF) relaying. Unlike prior comparisons, we assume that electromagnetic interference (EMI), consisting of incoming waves from external sources, is present at the location where the IRS or DF relay are placed. The analysis, in terms of minimizing the total transmit power, shows that EMI has a strong impact on DF relay-assisted communications, even when the relaying protocol is optimized agains…
Intelligent reflecting surface (IRS) and unmanned aerial vehicle (UAV) have emerged as two promising technologies to boost the performance of wireless communication networks, by proactively altering the wireless communication channels via smart signal reflection and maneuver control, respectively. However, they face different limitations in practice, which restrain their future applications. In this article, we propose new methods to jointly apply IRS and UAV in integrated air-ground wireless networks by exploiting their complementary advantages. Specifically, terrestrial IRS is used to enhanc…
Intelligent reflecting surface (IRS) is a promising solution to build a programmable wireless environment for future communication systems, in which the reflector elements steer the incident signal in fully customizable ways by passive beamforming. In this paper, an IRS-aided secure spatial modulation (SM) is proposed, where the IRS perform passive beamforming and information transfer simultaneously by adjusting the on-off states of the reflecting elements. We formulate an optimization problem to maximize the average secrecy rate (SR) by jointly optimizing the passive beamforming at IRS and th…
What is a reconfigurable intelligent surface? What is a smart radio environment? What is a metasurface? How do metasurfaces work and how to model them? How to reconcile the mathematical theories of communication and electromagnetism? What are the most suitable uses and applications of reconfigurable intelligent surfaces in wireless networks? What are the most promising smart radio environments for wireless applications? What is the current state of research? What are the most important and challenging research issues to tackle? These are a few of the many questions that we investigate in this …
Non-orthogonal multiple access (NOMA) scheme enables serving users with the same resource block i.e. frequency or time by multiplexing the signal of the users. Intelligent reflecting surfaces (IRS) or reconfigurable intelligent surfaces (RIS) is a potential approach for increasing transmission efficiency by modifying signal propagation by tweaking typically passive reflective components. IRS reconfigures the wireless network in this manner to improve system performance. The research considered an IRS-assisted downlink NOMA system. This work modified the reference model by adopting an IRS-speci…
User privacy protection is considered a critical issue in wireless networks, which drives the demand for various secure information interaction techniques. In this paper, we introduce an intelligent reflecting surface (IRS)-aided security classification wireless communication system, which reduces the transmit power of the base station (BS) by classifying users with different security requirements. Specifically, we divide the users into confidential subscribers with secure communication requirements and general communication users with simple communication requirements. During the communicatio…
This paper presents a literature review on recent applications and design aspects of the intelligent reflecting surface (IRS) in the future wireless networks. Conventionally, the network optimization has been limited to transmission control at two endpoints, i.e., end users and network controller. The fading wireless channel is uncontrollable and becomes one of the main limiting factors for performance improvement. The IRS is composed of a large array of scattering elements, which can be individually configured to generate additional phase shifts to the signal reflections. Hence, it can active…
Reconfigurable Intelligent Surface (RIS) has becoming a useful tool in future wireless communication systems for close-distance communication network. This paper we use Reconfigurable Intelligent Surface (RIS) for downlink multi-user communication designed to improve energy collection performance while satisfying wireless information and Power Transfer (WIPT). The designed system consists of an IRS-assisted system consists of a multi-antenna assisted base station (BS) and two opposite multi-antenna assisted information receiver cooperated (RIS) as energy receiver (ERs) that meets energy collec…
Although the fifth-generation (5G) technologies will significantly improve the spectrum and energy efficiency of today's wireless communication networks, their high complexity and hardware cost as well as increasingly more energy consumption are still crucial issues to be solved. Furthermore, despite that such technologies are generally capable of adapting to the space and time varying wireless environment, the signal propagation over it is essentially random and largely uncontrollable. Recently, intelligent reflecting surface (IRS) has been proposed as a revolutionizing solution to address th…
Computation offloading in multi-access edge computing (MEC) is an effective paradigm for enabling resource-intensive smart applications. However, when the wireless channel utilized for offloading computing activities is hostile, the proper advantages of MEC may not be completely realized. Intelligent reflecting surface (IRS) is a new technology that has recently attracted significant interest can optimize the wireless transmission environment in a programmable way and improving the connectivity between user equipment (UE) and base station (BS). In this paper, the performance of MEC architectur…
Intelligent reflecting surface (IRS) is a promising new technology for achieving spectrum and energy efficient wireless communication systems in the future. By adaptively varying the incident signals' phases/amplitudes and thereby establishing favorable channel responses through a large number of reconfigurable passive reflecting elements, IRS is able to enhance the communication performance of mobile users in its vicinity cost-effectively. In this paper, we study an IRS-enhanced orthogonal frequency division multiplexing (OFDM) system in which an IRS is deployed to assist the communication be…
This paper focuses on studying orthogonal and non-orthogonal multiple access in intelligent reflecting surface (IRS)-aided systems. Unlike most prior works assuming continuous phase shifts, we employ the practical setup where only a finite number of discrete phase shifts are available. To maximize the sum rate, active beamforming and discrete reflection need to be jointly optimized. We therefore propose an alternative optimization method to get the optimal continuous phase shifts iteratively, and then quantize each phase shift to its nearest discrete value. The sum-rate maximization of differe…
Intelligent reflecting surface (IRS) has been deemed as a transformative technology to achieve smart and reconfigurable environment for wireless communication. This letter studies a new IRS-aided communication system, where multiple IRSs assist in the communication between a multi-antenna base station (BS) and a remote single-antenna user by multi-hop signal reflection. Specifically, by exploiting the line-of-sight (LoS) link between nearby IRSs, a multi-hop cascaded LoS link between the BS and user is established where a set of IRSs are selected to successively reflect the BS's signal, so tha…
We investigate the benefits of mutual coupling effects between the passive elements of intelligent reconfigurable surfaces (IRSs) on maximizing the achievable rate of downlink Internet-of-Things (IoT) networks. In this paper, we present an electromagnetic (EM) coupling model for IRSs whose elements are connected minimum scattering antennas (i.e., dipoles). Using Chu's theory, we incorporate the finite antenna size constraint on each element of the IRS to obtain the IRS mutual impedance matrix. By maximizing the IRS phase shiters using the gradient ascent procedure, our numerical results show t…
Reconfigurable intelligent surfaces have emerged as a promising technology for future wireless networks. Given that a large number of reflecting elements is typically used, and that the surface has no signal processing capabilities, a major challenge is to cope with the overhead that is required to estimate the channel state information and to report the optimized phase shifts to the surface. This issue has not been addressed by previous works, which do not explicitly consider the overhead during the resource allocation phase. This work aims at filling this gap, developing an overhead-aware re…
Future wireless networks are expected to constitute a distributed intelligent wireless communications, sensing, and computing platform, which will have the challenging requirement of interconnecting the physical and digital worlds in a seamless and sustainable manner. Currently, two main factors prevent wireless network operators from building such networks: 1) the lack of control of the wireless environment, whose impact on the radio waves cannot be customized, and 2) the current operation of wireless radios, which consume a lot of power because new signals are generated whenever data has to …
Intelligent reflecting surface (IRS) is a proposing technology in 6G to enhance the performance of wireless networks by smartly reconfiguring the propagation environment with a large number of passive reflecting elements. However, current works mainly focus on single IRS-empowered wireless networks, where the channel rank deficiency problem has emerged. In this paper, we propose a distributed IRS-empowered communication network architecture, where multiple source-destination pairs communicate through multiple distributed IRSs. We further contribute to maximize the achievable sum-rates in this …
In this work, we consider a single input single output (SISO) system for Reconfigurable Intelligent Surface (RIS) assisted mmWave communication. We consider Rician channel models over user node to RIS and RIS to Access Point (AP). We obtain closed form expressions for capacity with channel state information (CSI) and without CSI at the transmitter. Newly derived capacity expressions are closed form expressions in a very compact form. We also simplified the closed form expressions for average symbol error probability. We also characterize the impacts of key parameters Rician factor K and number…
Intelligent reflecting surface (IRS) is an emerging technology that is able to significantly improve the performance of wireless communications, by smartly tuning signal reflections at a large number of passive reflecting elements. On the other hand, with ubiquitous wireless devices and ambient radio-frequency signals, wireless sensing has become a promising new application for the next-generation/6G wireless networks. By synergizing low-cost IRS and fertile wireless sensing applications, this article proposes a new IRS-aided sensing paradigm for enhancing the performance of wireless sensing c…
Intelligent reflecting surfaces (IRSs) have emerged as a promising wireless technology for the dynamic configuration and control of electromagnetic waves, thus creating a smart (programmable) radio environment. In this context, we study a multi-IRS assisted two-way communication system consisting of two users that employ full-duplex (FD) technology. More specifically, we deal with the joint IRS location and size (i.e., the number of reflecting elements) optimization in order to minimize an upper bound of system outage probability under various constraints: minimum and maximum number of reflect…
In this paper, a novel intelligent reflecting surface (IRS)-assisted wireless powered communication network (WPCN) architecture is proposed for power-constrained Internet-of-Things (IoT) smart devices, where IRS is exploited to improve the performance of WPCN under imperfect channel state information (CSI). We formulate a hybrid access point (HAP) transmit energy minimization problem by jointly optimizing time allocation, HAP energy beamforming, receiving beamforming, user transmit power allocation, IRS energy reflection coefficient and information reflection coefficient under the imperfect CS…
Intelligent reflecting surface (IRS) has emerged as a promising paradigm to improve the capacity and reliability of a wireless communication system by smartly reconfiguring the wireless propagation environment. To achieve the promising gains of IRS, the acquisition of the channel state information (CSI) is essential, which however is practically difficult since the IRS does not employ any transmit/receive radio frequency (RF) chains in general and it has limited signal processing capability. In this paper, we study the uplink channel estimation problem for an IRS-aided multiuser single-input m…
Intelligent reflecting surface (IRS) is a promising technology for the 6th generation of wireless systems, realizing the smart radio environment concept. In this paper, we present a novel tensor-based receiver for IRS-assisted multiple-input multiple-output communications capable of jointly estimating the channels and the transmitted data streams in a semi-blind fashion. Assuming a fully passive IRS architecture and introducing a simple space-time coding scheme at the transmitter, the received signal model can be advantageously built using the PARATUCK tensor model, which can be seen as a hybr…
Intelligent reflecting surfaces (IRSs), consisting of reconfigurable metamaterials, have recently attracted attention as a promising cost-effective technology that can bring new features to wireless communications. These surfaces can be used to partially control the propagation environment and can potentially provide a power gain that is proportional to the square of the number of IRS elements when configured in a proper way. However, the configuration of the local phase matrix at the IRSs can be quite a challenging task since they are purposely designed to not have any active components, ther…
Intelligent reflecting surfaces (IRSs) have the potential to transform wireless communication channels into smart reconfigurable propagation environments. To realize this new paradigm, the passive IRSs have to be large, especially for communication in far-field scenarios, so that they can compensate for the large end-to-end path-loss, which is caused by the multiplication of the individual path-losses of the transmitter-to-IRS and IRS-to-receiver channels. However, optimizing a large number of sub-wavelength IRS elements imposes a significant challenge for online transmission. To address this …
Reconfigurable Intelligent Surfaces (RIS) or Intelligent Reflecting Surfaces (IRS) are metasurfaces that can be deployed in various places in wireless environments to make these environments controllable and reconfigurable. In this paper, we investigate the problem of using 3D beamforming in RIS-empowered wireless networks and propose a new scheme that provides more degrees of freedom in designing and deploying the RIS-based networks. In the proposed scheme, a base station (BS) equipped with a full dimensional array of antennas optimizes its radiation pattern in the three-dimensional space to …
Over-the-air computation (AirComp) becomes a promising approach for fast wireless data aggregation via exploiting the superposition property in a multiple access channel. To further overcome the unfavorable signal propagation conditions for AirComp, in this paper, we propose an intelligent reflecting surface (IRS) aided AirComp system to build controllable wireless environments, thereby boosting the received signal power significantly. This is achieved by smartly tuning the phase shifts for the incoming electromagnetic waves at IRS, resulting in reconfigurable signal propagations. Unfortunatel…
Intelligent reflecting surface (IRS) is envisioned to play a significant role in future wireless communication systems thanks to its powerful capability of enabling smart and reconfigurable radio environment. In this paper, we study the multi-IRS aided downlink communication in a massive multiple-input multiple-output (MIMO) system, where a multi-antenna BS simultaneously serves multiple remote single-antenna users with orthogonal beams reflected by multiple IRSs. By exploiting the line-of-sight (LoS) link between each pair of selected IRSs, a multi-hop cascaded LoS link can be established bet…
An intelligent reflecting surface (IRS), consisting of reconfigurable metamaterials, can be used to partially control the radio environment and thereby bring new features to wireless communications. Previous works on IRS have particularly studied the range extension use case and under what circumstances the new technology can beat relays. In this paper, we study another use case that might have a larger impact on the channel capacity: rank improvement. One of the classical bottlenecks of point-to-point MIMO communications is that the capacity gains provided by spatial multiplexing are only lar…
Smart and reconfigurable wireless communication environments can be established by exploiting well-designed intelligent reflecting surfaces (IRSs) to shape the communication channels. In this paper, we investigate how multiple IRSs affect the performance of multi-user full-duplex communication systems under hardware impairment at each node, wherein the base station (BS) and the uplink users are subject to maximum transmission power constraints. Firstly, the uplink-downlink system weighted sum-rate (SWSR) is derived which serves as a system performance metric. Then, we formulate the resource al…
Reconfigurable intelligent surface (RIS) is an emerging technique employing metasurface to reflect the signal from the source node to the destination node. By smartly reconfiguring the electromagnetic (EM) properties of the metasurface and adjusting the EM parameters of the reflected radio waves, RIS can turn the uncontrollable propagation environment into an artificially reconfigurable space, and thus, can significantly increase the communications capacity and improve the coverage of the system. In this paper, we investigate the far field channel in which the line-of-sight (LOS) propagation i…
National and Kapodistrian University of Athens（雅典国立卡波季斯特里安大学）；Technology Innovation Institute（技术创新研究院）；Zhejiang University（浙江大学）；Singapore University of Technology and Design（新加坡科技设计大学）；University of Oulu（奥卢大学）；Mohamed Bin Zayed University of Artificial Intelligence（穆罕默德·本·扎耶德人工智能大学）
The emerging technology of Reconfigurable Intelligent Surfaces (RISs) is provisioned as an enabler of smart wireless environments, offering a highly scalable, low-cost, hardware-efficient, and almost energy-neutral solution for dynamic control of the propagation of electromagnetic signals over the wireless medium, ultimately providing increased environmental intelligence for diverse operation objectives. One of the major challenges with the envisioned dense deployment of RISs in such reconfigurable radio environments is the efficient configuration of multiple metasurfaces with limited, or even…
The recently completed 5G new radio standard is a result of several cutting-edge technologies, including massive multiple-input multiple-output (MIMO), millimeter (mm)-Wave communication and network densification. However, these technologies face two main practical limitations 1) the lack of control over the wireless channel, and 2) the high power consumption of the wireless interface. To address the need for green and sustainable future cellular networks, the concept of reconfiguring wireless propagation environments using Intelligent Reflecting Surfaces (IRS)s has emerged. An IRS comprises o…
Intelligent reflecting surface (IRS) has emerged as an enabling technology to achieve smart and reconfigurable wireless communication environment cost-effectively. Prior works on IRS mainly consider its passive beamforming design and performance optimization without the inter-IRS signal reflection, which thus do not unveil the full potential of multi-IRS assisted wireless networks. In this paper, we study a double-IRS assisted multi-user communication system with the \emph{cooperative} passive beamforming design that captures the multiplicative beamforming gain from the inter-IRS channel. Unde…
Intelligent reflecting surface (IRS) is a new promising technology that is able to reconfigure the wireless propagation channel via smart and passive signal reflection. In this paper, we investigate the capacity region of a two-user communication network with one access point (AP) aided by $M$ IRS elements for enhancing the user-AP channels, where the IRS incurs negligible delay, thus the user-AP channels via the IRS follow the classic discrete memoryless channel model. In particular, we consider two practical IRS deployment strategies that lead to different effective channels between the user…
{Robust transceiver design against unresolvable system uncertainties is of crucial importance for reliable communication. We consider a MIMO multi-hop system, where the source, the relay, and the destination are equipped with multiple antennas. Further, an intelligent reconfigurable surface (IRS) is established to cancel the RSI as much as possible. The considered decode-and-forward (DF) hybrid relay can operate in either half-duplex or full-duplex mode, and the mode changes adaptively depending on the RSI strength. We investigate a robust transceiver design problem, which maximizes the throug…
It is known that the capacity of the intelligent reflecting surface (IRS) aided cellular network can be effectively improved by reflecting the incident signals from the transmitter in a low-cost passive reflecting way. Nevertheless, in the actual network operation, the base station (BS) and IRS may belong to different operators, consequently, the IRS is reluctant to help the BS without any payment. Therefore, this paper investigates price-based reflection resource (elements) allocation strategies for an IRS-aided multiuser multiple-input and single-output (MISO) downlink communication systems,…
Intelligent reflecting surface (IRS) has emerged as a key enabling technology to realize smart and reconfigurable radio environment for wireless communications, by digitally controlling the signal reflection via a large number of passive reflecting elements in real-time. Different from conventional wireless communication techniques that only adapt to but have no or limited control over dynamic wireless channels, IRS provides a new and cost-effective means to combat the wireless channel impairments in a proactive manner. However, despite its great potential, IRS faces new and unique challenges …
Physical-layer key generation (PKG) can generate symmetric keys between two communication ends based on the reciprocal uplink and downlink channels. By smartly reconfiguring the radio signal propagation, intelligent reflecting surface (IRS) is able to improve the secret key rate of PKG. However, existing works involving IRS-assisted PKG are concentrated in single-antenna wireless networks. So this paper investigates the problem of PKG in the IRS-assisted multiple-input single-output (MISO) system, which aims to maximize the secret key rate by optimally designing the IRS passive beamforming. Fi…
In this paper, we investigate the use of intelligent reflecting surfaces (IRSs) (i.e., smart mirrors) to relax the line-of-sight requirement of free space optical (FSO) systems. We characterize the impact of the physical parameters of the IRS, such as its size, position, and orientation, on the quality of the end-to-end FSO channel. In addition, we develop a statistical channel model for the geometric and the misalignment losses which accounts for the random movements of the IRS, transmitter, and receiver due to building sway. This model can be used for performance analysis of IRS-based FSO sy…
Prior research on intelligent reflection surface (IRS)-assisted unmanned aerial vehicle (UAV) communications has focused on a fixed location for the IRS or mounted on a UAV. The assumption that the IRS is located at a fixed position will prohibit mobile users from maximizing many wireless network benefits, such as data rate and coverage. Furthermore, assuming that the IRS is placed on a UAV is impractical for various reasons, including the IRS's weight and size and the speed of wind in severe weather. Unlike previous studies, this study assumes a single UAV and an IRS mounted on a mobile groun…
Intelligent reflecting surface (IRS) is a promising technology to improve the performance of backscatter communication systems by smartly reconfiguring the multi-reflection channel. To fully exploit the passive beamforming gain of IRS in backscatter communication, channel state information (CSI) is indispensable but more practically challenging to acquire than conventional IRS-assisted systems, since IRS passively reflects signals over both the forward and backward (backscattering) links between the reader and tag. To address this issue, we propose in this letter a new and efficient channel es…
The performance of wireless communication systems is fundamentally constrained by the random and uncontrollable wireless channel. By leveraging the recent advance in digitally-controlled metasurface, intelligent reflecting surface (IRS) has emerged as a promising solution to enhance the wireless network performance by smartly reconfiguring the radio propagation environment. Despite the substantial research on IRS-aided communications, this article addresses the important issue of how to deploy IRSs in a wireless network to achieve its optimum performance. We first compare the two conventional …
Reconfigurable intelligent surfaces (RISs) have the potential of realizing the emerging concept of smart radio environments by leveraging the unique properties of meta-surfaces. In this article, we discuss the potential applications of RISs in wireless networks that operate at high-frequency bands, e.g., millimeter wave (30-100 GHz) and sub-millimeter wave (greater than 100 GHz) frequencies. When used in wireless networks, RISs may operate in a manner similar to relays. This paper elaborates on the key differences and similarities between RISs that are configured to operate as anomalous reflec…
Recent advances in the fabrication and experimentation of Reconfigurable Intelligent Surfaces (RISs) have motivated the concept of the smart radio environment, according to which the propagation of information-bearing waveforms in the wireless medium is amenable to programmability. Although the vast majority of recent experimental research on RIS-empowered wireless communications gravitates around narrowband beamforming in quasi-free space, RISs are foreseen to revolutionize wideband wireless connectivity in dense urban as well as indoor scenarios, which are usually characterized as strongly r…
