Neighbor Discovery (ND) is the process employed by two wireless devices to discover each other. There are many different ND protocols, both in the scientific literature and also those employed in practice. All ND protocols involve devices sending beacons, and also listening for them. Protocols differ in terms of how the beacon transmissions and reception windows are scheduled, and the device sleeps in between consecutive transmissions and reception windows in order to save energy. A successful discovery constitutes a sending device's beacon overlapping with a receiving device's reception window. The goal of all ND protocols is to minimize the discovery latency. In spite of the ubiquity of ND protocols and active research on this topic for over two decades, the basic question "Given an energy budget, what is the minimum guaranteed ND latency?", however, still remains unanswered. Given the different kinds of protocols that exist, there has also been no standard way of comparing them and their performance. This paper, for the first time, answers the question on the best-achievable ND latency for a given energy budget. We derive discovery latencies for different scenarios, e.g., when both devices have the same energy budgets, and both devices have different energy budgets. We also show that some existing protocols can be parametrized such that they perform optimally. The fact that the parametrizations of some other protocols were optimal was not known before, and can now be established using our technique. Our results are restricted to the case when a few devices discover each other at a time, as is the case in most real-life scenarios. When many devices need to discover each other simultaneously, packet collisions play a dominant role in the discovery latency and how to analyze such scenarios need further study.
In wireless peer-to-peer networks that serve various proximity-based applications, peer discovery is the key to identifying other peers with which a peer can communicate and an understanding of its performance is fundamental to the design of an efficient discovery operation. This paper analyzes the performance of wireless peer discovery through comprehensively considering the wireless channel, spatial distribution of peers, and discovery operation parameters. The average numbers of successfully discovered peers are expressed in closed forms for two widely used channel models, i.e., the interfe…
Network coding is known as a promising approach to improve wireless network performance. How to discover the coding opportunity in relay nodes is really important for it. There are more coding chances, there are more times it can improve network throughput by network coding operation. In this paper, an extended network coding opportunity discovery scheme (ExCODE) is proposed, which is realized by appending the current node ID and all its 1-hop neighbors' IDs to the packet. ExCODE enables the next hop relay node to know which nodes else have already overheard the packet, so it can discover the …
This paper studies the problem of neighbor discovery in wireless networks, namely, each node wishes to discover and identify the network interface addresses (NIAs) of those nodes within a single hop. A novel paradigm, called compressed neighbor discovery is proposed, which enables all nodes to simultaneously discover their respective neighborhoods with a single frame of transmission, which is typically of a few thousand symbol epochs. The key technique is to assign each node a unique on-off signature and let all nodes simultaneously transmit their signatures. Despite that the radios are half-d…
In distributed wireless networks, neighbor discovery is one of the bootstrapping primitives in supporting many important network functionalities. Existing neighbor discovery protocols mostly assume a single-channel network model and can only support a subset of duty cycles, thus limiting the energy conservation levels of wireless devices. In this paper, we study the neighbor discovery problem in multi-channel networks where the wireless nodes have heterogeneous duty cycles, asynchronous clocks and asymmetrical channel perceptions, which we formulate as heterogeneous neighbor discovery problem.…
Location-based services in a wireless network require nodes to know their locations accurately. Conventional solutions rely on contention-based medium access, where only one node can successfully transmit at any time in any neighborhood. In this paper, a novel, complete, distributed ranging and localization solution is proposed, which let all nodes in the network broadcast their location estimates and measure distances to all neighbors simultaneously. An on-off signaling is designed to overcome the physical half-duplex constraint. In each iteration, all nodes transmit simultaneously, each broa…
A novel solution is proposed to undertake a frequent task in wireless networks, which is to let all nodes broadcast information to and receive information from their respective one-hop neighboring nodes. The contribution is two-fold. First, as each neighbor selects one message-bearing codeword from its unique codebook for transmission, it is shown that decoding their messages based on a superposition of those codewords through the multiaccess channel is fundamentally a problem of compressed sensing. In the case where each message consists of a small number of bits, an iterative algorithm based…
A train backbone network consists of a sequence of nodes arranged in a linear topology. A key step that enables communication in such a network is that of topology discovery, or train inauguration, whereby nodes learn in a distributed fashion the physical topology of the backbone network. While the current standard for train inauguration assumes wired links between adjacent backbone nodes, this work investigates the more challenging scenario in which the nodes communicate wirelessly. The key motivations for this desired switch from wired topology discovery to wireless one are the flexibility a…
The discovery of neighbouring nodes in multihop wireless networks has become a key challenge. Due to tribulations in communication, synchronization loss between nodes, disparity in transmission power etc, the connectivity of nodes will always experience disruptions. On the other hand, the energy utilization by the nodes also became critical . In this paper, we propose a new method for neighbour discovery in wireless sensor networks (WSNs) which pays an eminent consideration for energy utilization and QoS parameters like latency, throughput, error rate etc. In the proposed method, the network r…
In this paper, we present an overview of Nearest neighbor (NN) methods, which are frequently employed for solving classification problems using supervised learning. The article concisely introduces the theoretical background, algorithmic, and implementation aspects along with the key applications. From an application standpoint, this article explores the challenges related to the 5G and beyond wireless networks which can be solved using NN classification techniques.
Interference management has become a key factor in regulating transmissions in wireless communication networks. To support effective interference management schemes, it can be essential to have prior knowledge about the network topology. In this paper, we build on existing results in the literature on the simulation of the message passing model, and present an efficient strategy for fast discovery of the network topology during a pilot communication phase. More precisely, we investigate the minimum number of communication rounds that is needed to discover an arbitrary network topology with a m…
Neighbor discovery is a fundamental service for initialization and managing network dynamics in wireless sensor networks and mobile sensing applications. In this paper, we present a novel design principle named Talk More Listen Less (TMLL) to reduce idle-listening in neighbor discovery protocols by learning the fact that more beacons lead to fewer wakeups. We propose an extended neighbor discovery model for analyzing wakeup schedules in which beacons are not necessarily placed in the wakeup slots. Furthermore, we are the first to consider channel occupancy rate in discovery protocols by introd…
Multihop ad hoc wireless networks consist of mobile nodes that communicate with each other without any fixed infrastructure. The nodes in these networks are power constrained, since they operate in limited battery energy. Cooperative caching is an attractive solution for reducing network traffic and bandwidth demands in mobile ad hoc networks. Deploying caches in mobile nodes can reduce the overall traffic considerably. Cache hits eliminate the need to contact the data source frequently, which avoids additional network overhead. In this paper we propose a cache discovery policy for cooperative…
In this paper we have analyzed energy efficient neighbour selection algorithms for routing in wireless sensor networks. Since energy saving or consumption is an important aspect of wireless sensor networks, its precise usage is highly desirable both for the faithful performance of network and to increase the network life time. For this work, we have considered a flat network topology where every node has the same responsibility and capability. We have compared two energy efficient algorithms and analyzed their performances with increase in number of nodes, time rounds and node failures.
5G wireless networks aim to achieve seamless mobile broadband services, machine to machine and ultra-reliable low latency communications. These goals require massive improvements in terms of capacity, reliability, latency reduction, and scalability. Besides software defined networks and network function virtualization, self organizing networks (SON) is another enabling technology which makes 5G feasible. Automatic neighbor relations (ANR) is a prominent component of SON which has direct impact on reliability, scalability, and capacity of the wireless networks. When the current state of standar…
Neighbor discovery plays a crucial role in the formation of wireless sensor networks and mobile networks where the power of sensors (or mobile devices) is constrained. Due to the difficulty of clock synchronization, many asynchronous protocols based on wake-up scheduling have been developed over the years in order to enable timely neighbor discovery between neighboring sensors while saving energy. However, existing protocols are not fine-grained enough to support all heterogeneous battery duty cycles, which can lead to a more rapid deterioration of long-term battery health for those without su…
We propose a routing protocol for wireless networks. Wireless routing protocols allow hosts within a network to have some knowledge of the topology in order to know when to forward a packet (via broadcast) and when to drop it. Since a routing protocol forms the backbone of a network, it is a lucrative target for many attacks, all of which attempt to disrupt network traffic by corrupting routing tables of neighboring routers using false updates. Secure routing protocols designed for wired networks (such as S-BGP) are not scalable in an ad-hoc wireless environment because of two main drawbacks: …
In this paper, we present analytical study of routing overhead of reactive routing protocols for Wireless Multihop Networks (WMhNs). To accomplish the framework of generalized routing overhead, we choose Ad-Hoc on Demand Distance Vector (AODV), Dynamic Source Routing (DSR) and Dynamic MANET on Demand (DYMO). Considering basic themes of these protocols, we enhance the generalized network models by adding route monitoring overhead. Later, we take different network parameters and produce framework discussing the impact of variations of these parameters in network and routing performance. In the s…
The number of contending neighbors of a node in a multihop ad hoc network has to be adjusted while analyzing the performance of the network such as computing the end-to-end delays along a path from a given source to a destination. In this paper, we describe a method to adjust the number of contending neighbors of a node in a multihop wireless ad hoc network. Our method is based on the minimum number of neighbors that has to be common between two consecutive nodes along a path. We derive an analytical expression for the adjustment factor.
With the tremendous advances of the wireless devices technology, securing wireless sensor networks became more and more a vital but also a challenging task. In this paper we propose an integrated strategy that is meant to discover malicious nodes within a sensor network and to expel them from the network using a node self-destruction procedure. Basically, we will compare every sensor reading with its estimated values provided by two predictors: an autoregressive predictor [1] that uses past values provided by the sensor under investigation and a neural predictor that uses past values provided …
With the escalation of the IEEE 802.11 based wireless networks, voice over IP and analogous applications are also used over wireless networks. Recently, the wireless LAN systems are spaciously deployed for public Internet services. In public wireless LAN systems, reliable user authentication and mobility support are indispensable issues. When a mobile device budges out the range of one access point (AP) and endeavor to connect to new AP, it performs handoff. Contemporarily, PNC and SNC were proposed to propagate the MN context to the entire neighboring AP's on the wireless network with the hel…
The accelerating penetration of physical environments by objects with information processing and wireless communication capabilities requires approaches to find potential communication partners and discover services. In the present work, we focus on passive discovery approaches in multi-channel wireless networks based on overhearing periodic beacon transmissions of neighboring devices which are otherwise agnostic to the discovery process. We propose a family of low-complexity algorithms that generate listening schedules guaranteed to discover all neighbors. The presented approaches simultaneou…
The accelerating penetration of physical environments by objects with information processing and wireless communication capabilities requires approaches to find potential communication partners and discover services. In the present work, we focus on passive discovery approaches in multi-channel wireless networks based on overhearing periodic beacon transmissions of neighboring devices which are otherwise agnostic to the discovery process. We propose a family of low-complexity algorithms that generate listening schedules guaranteed to discover all neighbors. The presented approaches simultaneou…
The topology of a sensor network changes very frequently due to node failures because of power constraints or physical destruction. Robustness to topology changes is one of the important design factors of wireless sensor networks which makes them suitable to military, communications, health and surveillance applications. Network criticality is a measure which capture the properties of network robustness to environmental changes. In this work, we derived the analytical formulas for network criticality, normalized network criticality and studied the network robustness for r-nearest neighbor cycl…
This paper, based on $k$-NN graph, presents symmetric $(k,j)$-NN graph $(1 \leq j < k)$, a brand new topology which could be adopted by a series of network-based structures. We show that the $k$ nearest neighbors of a node exert disparate influence on guaranteeing network connectivity, and connections with the farthest $j$ ones among these $k$ neighbors are competent to build up a connected network, contrast to the current popular strategy of connecting all these $k$ neighbors. In particular, for a network with node amount $n$ up to $10^3$, as experiments demonstrate, connecting with the farth…
Multi-access networks may exhibit severe unfairness in throughput. Recent studies show that this unfairness is due to local differences in the neighborhood structure: Nodes with less neighbors receive better access. We study the unfairness in saturated linear networks, and adapt the multi-access CSMA protocol to remove the unfairness completely, by choosing the activation rates of nodes appropriately as a function of the number of neighbors. We then investigate the consequences of this choice of activation rates on the network-average saturated throughput, and we show that these rates perform …
Age of Information (AoI), measures the time elapsed since the last received information packet was generated at the source. We consider the problem of AoI minimization for single-hop flows in a wireless network, under pairwise interference constraints and time varying channel. We consider simple, yet broad, class of distributed scheduling policies, in which a transmission is attempted over each link with a certain attempt probability. We obtain an interesting relation between the optimal attempt probability and the optimal AoI of the link, and its neighboring links. We then show that the optim…
The advance in wireless technologies and portable devices such as smart phones has made the Wireless Local Area Networks (WLANs) popular in the recent years. Nowadays, WLANs have become widely accepted in both private and public sectors due to ease of installation, reasonable prices and high data rates that can support real time applications. However, fast handoff required for such real-time applications is not provided in the current IEEE 802.11 specifications. Consequently, providing seamless mobility in these WLANs is an important issue. To solve this problem, a new fast handoff scheme call…
For a large multi-hop wireless network, nodes are preferable to make distributed and localized link-scheduling decisions with only interactions among a small number of neighbors. However, for a slowly decaying channel and densely populated interferers, a small size neighborhood often results in nontrivial link outages and is thus insufficient for making optimal scheduling decisions. A question arises how to deal with the information outside a neighborhood in distributed link-scheduling. In this work, we develop joint approximation of information and distributed link scheduling. We first apply …
Neighbor discovery is the procedure using which two wireless devices initiate a first contact. In low power ad-hoc networks, radios are duty-cycled and the latency until a packet meets a reception phase of another device is determined by a random process. Most research considers slotted protocols, in which the points in time for reception are temporally coupled to beacon transmissions. In contrast, many recent protocols, such as ANT/ANT+ and Bluetooth Low Energy (BLE) use a slotless, periodic-interval based scheme for neighbor discovery. Here, one device periodically broadcasts packets, wherea…
We study the problem of wireless network resilience to node failures from a percolation-based perspective. In practical wireless networks, it is often the case that the failure probability of a node depends on its degree (number of neighbors). We model this phenomenon as a degree-dependent site percolation process on random geometric graphs. In particular, we obtain analytical conditions for the existence of phase transitions within this model. Furthermore, in networks carrying traffic load, the failure of one node can result in redistribution of the load onto other nearby nodes. If these node…
In mobile ad-hoc networks, neighbor discovery protocols are used to find surrounding devices and to establish a first contact between them. Since the clocks of the devices are not synchronized and their energy-budgets are limited, usually duty-cycled, asynchronous discovery protocols are applied. Only if two devices are awake at the same point in time, they can rendezvous. Currently, time-slotted protocols, which subdivide time into multiple intervals with equal lengths (slots), are considered to be the most efficient discovery schemes. In this paper, we break away from the assumption of slott…
Mobile devices apply neighbor discovery (ND) protocols to wirelessly initiate a first contact within the shortest possible amount of time and with minimal energy consumption. For this purpose, over the last decade, a vast number of ND protocols have been proposed, which have progressively reduced the relation between the time within which discovery is guaranteed and the energy consumption. In spite of the simplicity of the problem statement, even after more than 10 years of research on this specific topic, new solutions are still proposed even today. Despite the large number of known ND protoc…
Physical-layer network coding (PNC) is a promising approach for wireless networks. It allows nodes to transmit simultaneously. Due to the difficulties of scheduling simultaneous transmissions, existing works on PNC are based on simplified medium access control (MAC) protocols, which are not applicable to general multi-hop wireless networks, to the best of our knowledge. In this paper, we propose a distributed MAC protocol that supports PNC in multi-hop wireless networks. The proposed MAC protocol is based on the carrier sense multiple access (CSMA) strategy and can be regarded as an extension …
A Sensor network generally has a large number of sensor nodes that are deployed at some audited site. In most sensor networks the nodes are static. Nevertheless, node connectivity is subject to changes because of disruptions in wireless communication, transmission power changes, or loss of synchronization between neighbouring nodes, so there is a need to maintain synchronization between the neighbouring nodes in order to have efficient communication. Hence even after a sensor is aware of its immediate neighbours, it must continuously maintain its view a process we call continuous neighbour dis…
In this paper we analyze power and frequency allocation in wireless networks through potential games. Potential games are used frequently in the literature for this purpose due to their desirable properties, such as convergence and stability. However, potential games usually assume massive message passing to obtain the necessary neighbor information at each user to achieve these properties. In this paper we show an example of a game where we are able to characterize the necessary neighbor information in order to show that the game has a potential function and the properties of potential games.…
Object tracking applications are gaining popularity and will soon utilize Energy Harvesting (EH) low-power nodes that will consume power mostly for Neighbor Discovery (ND) (i.e., identifying nodes within communication range). Although ND protocols were developed for sensor networks, the challenges posed by emerging EH low-power transceivers were not addressed. Therefore, we design an ND protocol tailored for the characteristics of a representative EH prototype: the TI eZ430-RF2500-SEH. We present a generalized model of ND accounting for unique prototype characteristics (i.e., energy costs for …
The purpose of data-link layer discovery protocols is to provide the network administrator with the current information (i.e., various Layer 2 and 3 parameters) about neighbor devices. These protocols are invaluable for network monitoring, maintenance, and troubleshooting. However, they start to play an important role in the operation of data-centers and other high-availability networks. This paper outlines design, implementation and deployment of Cisco Discovery Protocol and Link Layer Discovery Protocol simulation modules in OMNeT++ simulator.
In randomly deployed networks, such as sensor networks, an important problem for each node is to discover its \textit{neighbor} nodes so that the connectivity amongst nodes can be established. In this paper, we consider this problem by incorporating the physical layer parameters in contrast to the most of the previous work which assumed a collision channel. Specifically, the pilot signals that nodes transmit are successfully decoded if the strength of the received signal relative to the interference is sufficiently high. Thus, each node must extract signal parameter information from the superp…
A general open problem in networking is: what are the fundamental limits to the performance that is achievable with some given amount of resources? More specifically, if each node in the network has information about only its $1$-hop neighborhood, then what are the limits to performance? This problem is considered for wireless networks where each communication link has a minimum bandwidth quality-of-service (QoS) requirement. Links in the same vicinity contend for the shared wireless medium. The conflict graph captures which pairs of links interfere with each other and depends on the MAC proto…
Recently, network coding technique has emerged as a promising approach that supports reliable transmission over wireless loss channels. In existing protocols where users have no interest in considering the encoded packets they had in coding or decoding operations, this rule is expensive and inefficient. This paper studies the impact of encoded packets in the reliable unicast network coding via some theoretical analysis. Using our approach, receivers do not only store the encoded packets they overheard, but also report these information to their neighbors, such that users enable to take account…
We propose a secure scheme for wireless network coding, called the algebraic watchdog. By enabling nodes to detect malicious behaviors probabilistically and use overheard messages to police their downstream neighbors locally, the algebraic watchdog delivers a secure global self-checking network. Unlike traditional Byzantine detection protocols which are receiver-based, this protocol gives the senders an active role in checking the node downstream. The key idea is inspired by Marti et al.'s watchdog-pathrater, which attempts to detect and mitigate the effects of routing misbehavior. As an initi…
Neighbor discovery (ND) is a key initial step of network configuration and prerequisite of vehicular ad hoc network (VANET). However, the convergence efficiency of ND is facing the requirements of multi-vehicle fast networking of VANET with frequent topology changes. This paper proposes gossip-based information dissemination and sensing information assisted ND with MPR (GSIM-ND) algorithm for VANET. GSIM-ND algorithm leverages efficient gossip-based information dissemination in the case of multi-packet reception (MPR). Besides, through multi-target detection function of multiple sensors instal…
One of the most important problems in wireless sensor network is to develop a routing protocol that has energy efficiency. Since the power of the sensor Nodes are limited, conserving energy and network life is a critical issue in wireless sensor network. Clustering is one of the known methods widely used to face these challenges. In this paper, a cluster based communication protocol with considering the low energy consumption in wireless sensor networks, is introduced which balances the energy load among sensor nodes. The nodes close to each other have more overlap; they sense the same data fr…
In this paper, we have modeled the routing over- head generated by three reactive routing protocols; Ad-hoc On-demand Distance Vector (AODV), Dynamic Source Routing (DSR) and DYnamic MANET On-deman (DYMO). Routing performed by reactive protocols consists of two phases; route discovery and route maintenance. Total cost paid by a protocol for efficient routing is sum of the cost paid in the form of energy consumed and time spent. These protocols majorly focus on the optimization performed by expanding ring search algorithm to control the flooding generated by the mechanism of blind flooding. So,…
In wireless multi-hop networks, the instability of the wireless links leads to unstable networking. Even in the newly designed Software-Defined Wireless Sensor Networks (SDWSN), similar problems exist. To further improve the stability of SDWSN, we introduce a Link Quality (LQ) prediction model into the SDWSN architecture. The prediction model is used to improve the stability between neighbor nodes, and thus the stability of wireless multi-hop routes. Simulation results show that the LQ prediction model can make reasonable corrections to the reality wireless link model, which can well address t…
Multi-channel multi-interface Wireless Mesh Networks permit to spread the load across orthogonal channels to improve network capacity. Although broadcast is vital for many layer-3 protocols, proposals for taking advantage of multiple channels mostly focus on unicast transmissions. In this paper, we propose broadcast algorithms that fit any channel and interface assignment strategy. They guarantee that a broadcast packet is delivered with a minimum probability to all neighbors. Our simulations show that the proposed algorithms efficiently limit the overhead.
We study the minimum latency broadcast scheduling (MLBS) problem in Single-Radio Multi-Channel (SR-MC) wireless ad-hoc networks (WANETs), which are modeled by Unit Disk Graphs. Nodes with this capability have their fixed reception channels, but can switch their transmission channels to communicate with their neighbors. The single-radio and multi-channel model prevents existing algorithms for single-channel networks achieving good performance. First, the common assumption that one transmission reaches all the neighboring nodes does not hold naturally. Second, the multi-channel dimension provide…
In the context of the emerging Internet of Things (IoT), a proliferation of wireless connectivity can be expected. That ubiquitous wireless communication will be hard to centrally manage and control, and can be expected to be opaque to end users. As a result, owners and users of physical space are threatened to lose control over their digital environments. In this work, we propose the idea of an IoTScanner. The IoTScanner integrates a range of radios to allow local reconnaissance of existing wireless infrastructure and participating nodes. It enumerates such devices, identifies connection patt…
