Recently, gradient index cavities, or so-called transformation cavities, designed by conformal transformation optics have been studied to support resonant modes with both high Q-factors and emission directionality. We propose a new design method for transformation cavities to realize a narrower width of the refractive index profile, a great advantage in experimental implementations, without losing the benefits of conformal mapping. We study the resonant modes with both high Q-factor and directional emission in the newly designed transformation cavities, where the refractive index profile is 50 percent narrower than in previously proposed transformation cavities. By varying a system parameter with a fixed maximal value of the refractive index profile inside the cavity, the width of the refractive index profile narrows, the Q-factors become higher, and the near and far field patterns maintain their properties, namely conformal whispering gallery modes and bidirectional emission, respectively.
We present a novel differential refractive index sensor based on arrays of photonic molecules (PM) of dielectric cylinders and two structural defect cavities. The transmission spectrum of the photonic proposed structure as sensor shows a wide photonic stop band with two localized states. One of them, the reference state, is bound to a decagonal ring of cylinders and the other, the sensing state, to the defect cavities of the lattice. It is shown that defect mode is very sensitive to the presence of materials with dielectric permittivity different from that of the surrounding cylinders while th…
Mid-infrared spectroscopy is essential for chemical identification and compositional analysis, due to the existence of characteristic molecular absorption fingerprints. However, it is very challenging to determine the refractive index of an analyte at low concentrations using current photonic systems in a broad mid-infrared spectral range. We propose an imaging-based nanophotonic technique for refractive index determination. The technique is based on deeply subwavelength graphene plasmon cavities and allows for the retrieval of molecular concentration. This method features a two-dimensional ar…
Photonic crystal cavities enable the realization of high Q-factor and low mode-volume resonators, with typical architectures consisting of a thin suspended periodically-patterned layer to maximize confinement of light by strong index guiding. We investigate a heterostructure-based approach comprising a high refractive index core and lower refractive index cladding layers. Whilst confinement typically decreases with decreasing index contrast between the core and cladding layers, we show that, counter-intuitively, due to the confinement provided by the photonic band structure in the cladding lay…
In limaçon-shaped gradient index dielectric cavities designed by conformal transformation optics, the variation of Q-factors and emission directionality of resonant modes was traced in their system parameter space. For these cavities, their boundary shapes and refractive index profiles are determined in each case by a chosen conformal mapping which is taken as a coordinate transformation. Through the numerical exploration, we found that bidirectionality factors of generic high-Q resonant modes are not directly proportional to their Q-factors. The optimal system parameters for the coexistence o…
Chaos, namely exponential sensitivity to initial conditions, is generally considered a nuisance, inasmuch as it prevents long-term predictions in physical systems. Here, we present an easily accessible approach to undo deterministic chaos and tailor ray trajectories in arbitrary two-dimensional optical billiards, by introducing spatially varying refractive index therein. A new refractive index landscape is obtained by a conformal mapping, which makes the trajectories of the chaotic billiard fully predictable and the billiard fully integrable. Moreover, trajectory rectification can be pushed a …
We demonstrate a method to locally change the refractive index in planar optical devices by photodarkening of a thin chalcogenide glass layer deposited on top of the device. The method is used to tune the resonance of GaAs-based photonic crystal cavities by up to 3 nm at 940 nm, with only 5% deterioration in cavity quality factor. The method has broad applications for postproduction tuning of photonic devices.
Parity-time (PT) symmetric optical sensors operating around exceptional points have recently gained much attraction, offering an unparalleled high sensitivity in measuring small perturbations. In the past, most of the PT-symmetric sensors have been based on tracking the mode-splitting that arises due to a perturbation-induced change in coupling strength between two subcavities of the PT-symmetric system. We design a linear fiber Fabry-Pérot and coupled cavities sensor, tailored to operate in the broken PT-symmetric region. We explore a new sensing metric-that is, the mode's linewidth change as…
In this article, we present a numerical study of the optical properties of a metal nanowire interacting with a localized cavity in a two dimensional photonic crystal. The nature of the modes, their wavelength and width are investigated as a function of the particle radius. It is shown in particular that a particle with diameter about the lattice constant presents very narrow resonances corresponding to hybrid photonic-plasmonic modes, where increased lifetime is attributed to the decrease of the radiative losses by interaction with the photonic crystal. These results open interesting applicati…
We report a refractive index sensor comprising of unique T grating on top of periodic nano-cavities. The sensor has two resonant modes sensitive to different regions of the structure with low inter-region interference, hence allows simultaneous detection of two different analytes or more accurate detection of a single analyte. The sensor also provides a self-referencing feature for a broad range of refractive index, from 1.3 to 1.5. Using the FDTD method, the sensitivities of 801.7 nm/RIU and 1386.8 nm/RIU have been recorded for the two modes respectively. The versatility of the structure make…
We present a detailed experimental characterization of the spectral and spatial structure of the confined optical modes for oxide-apertured micropillar cavities, showing good-quality Hermite-Gaussian profiles, easily mode-matched to external fields. We further derive a relation between the frequency splitting of the transverse modes and the expected Purcell factor. Finally, we describe a technique to retrieve the profile of the confining refractive index distribution from the spatial profiles of the modes.
Si3N4 is an excellent material for applications of nanophotonics at visible wavelengths due to its wide bandgap and moderately large refractive index (n $\approx$ 2.0). We present the fabrication and characterization of Si3N4 photonic crystal nanobeam cavities for coupling to diamond nanocrystals and Nitrogen-Vacancy centers in a cavity QED system. Confocal micro-photoluminescence analysis of the nanobeam cavities demonstrates quality factors up to Q ~ 55,000, which is limited by the resolution of our spectrometer. We also demonstrate coarse tuning of cavity resonances across the 600-700nm ran…
Outer resonances are studied as one type of quasinormal modes in two-dimensional dielectric cavities with refractive index $n>1$. The outer resonances can be verified as the resonances which survive only outside the cavity in the small opening limit of the dielectric disk. We have confirmed that the outer resonances universally exist in deformed cavities irrespective of the geometry of cavity and they split into nearly degenerate states in slightly deformed cavity. Also we pointed out that the effective potential analogy is inapplicable to the description of outer resonances. Since most outer …
Gallium phosphide offers an attractive combination of a high refractive index ($n>3$ for vacuum wavelengths up to 4 μm) and a wide electronic bandgap (2.26 eV), enabling optical cavities with small mode volumes and low two-photon absorption at telecommunication wavelengths. Heating due to strongly confined light fields is therefore greatly reduced. Here, we investigate the benefits of these properties for cavity optomechanics. Utilizing a recently developed fabrication scheme based on direct wafer bonding, we realize integrated one-dimensional photonic crystal cavities made of gallium phosphid…
Resonant cavities with high quality factor and small mode volume provide crucial enhancement of light-matter interactions in nanophotonic devices that transport and process classical and quantum information. The production of functional circuits containing many such cavities remains a major challenge as inevitable imperfections in the fabrication detune the cavities, which strongly affects functionality such as transmission. In photonic crystal waveguides, intrinsic disorder gives rise to high-Q localized resonances through Anderson localization, however their location and resonance frequencie…
We evaluate the sensing properties of plasmonic waveguide sensors by calculating their resonant transmission spectra in different regions of the non-Hermitian eigenmode space. We elucidate the pitfalls of using modal dispersion calculations in isolation to predict plasmonic sensor performance, which we address by using a simple model accounting for eigenmode excitation and propagation. Our transmission calculations show that resonant wavelength and spectral width crucially depend on the length of the sensing region, so that no single criterion obtained from modal dispersion calculations alone …
We introduce an ultrasensitive detection technique for refractive index (RI) sensing based on an array of nanometer scale slot-antennas milled in a thin gold layer using a single lithographic step. Our experimental figures of merit (FOMs) of 140-210 in the telecom wavelength range approach the fundamental limit for standard propagating SPR sensors (~250).The underlying mechanism enabling this is the combination of a narrowband resonance of the slot-antennas with degeneracy breaking of Wood anomaly under slightly non-perpendicular illumination. In addition, we explore the sensitivity of the dev…
The spectral response of a plasmonic nanostructure may heavily depend on the refractive index of its surroundings. The key idea of this paper is to control this response by coherent optical means, i.e. with an optically controlled electromagnetically-induced-transparency medium. In such environment, an external laser provides a knob to shift the position of plasmonic resonances without the need to change the geometry of the nanostructure. Additionally, the setup can be exploited to excite narrow-band surface plasmon polaritons.
Defect cavities in 3D photonic crystal can trap and store light in the smallest volumes allowable in dielectric materials, enhancing non-linearities and cavity QED effects. Here, we study inverse rod-connected diamond (RCD) crystals containing point defect cavities using plane-wave expansion and finite-difference time domain methods. By optimizing the dimensions of the crystal, wide photonic band gaps are obtained. Mid-bandgap resonances can then be engineered by introducing point defects in the crystal. We investigate a variety of single spherical defects at different locations in the unit ce…
Increasing the refractive index available for optical and nanophotonic systems opens new vistas for design: for applications ranging from broadband metalenses to ultrathin photovoltaics to high-quality-factor resonators, higher index directly leads to better devices with greater functionality. Although standard transparent materials have been limited to refractive indices smaller than 3 in the visible, recent metamaterials designs have achieved refractive indices above 5, accompanied by high losses, and near the phase transition of a ferroelectric perovskite a broadband index above 26 has been…
The mechanism of unidirectional emission of high Q Whispering Gallery mode in deformed circular micro- cavities is studied and firstly presented in this paper. In phase space, light in the chaotic sea leaks out the cavity through the refraction regions, whose positions are controlled by stable islands. Moreover, the positions of fixed points according to the critical line in unstable manifolds mainly determines the light leak out from which refraction region and the direction of the emission. By controlling the cavity shape, we can tune the leaky regions, as well as the positions of fixed poin…
A new tuning mechanism is demonstrated for single-mode metal-clad plasmonic lasers, in which refractive-index of the laser's surrounding medium affects the resonant-cavity mode in the same vein as refractive-index of gain medium inside the cavity. Reversible, continuous, and mode-hop-free tuning of ~57GHz is realized for single-mode narrow-beam terahertz plasmonic quantum-cascade lasers (QCLs), which is demonstrated at much more practical temperature of 78K. The tuning is based on post-process deposition/etching of a dielectric (Silicon-dioxide) on a QCL chip that has already been soldered and…
We report the optimisation of optical properties of single defects in three-dimensional (3D) face-centred-cubic (FCC) woodpile photonic crystal (PC) cavities by using plane-wave expansion (PWE) and finite-difference time-domain (FDTD) methods. By optimising the dimensions of a 3D woodpile PC, wide photonic band gaps (PBG) are created. Optical cavities with resonances in the bandgap arise when point defects are introduced in the crystal. Three types of single defects are investigated in high refractive index contrast (Gallium Phosphide-Air) woodpile structures and Q-factors and mode volumes ($V…
We present a joint theoretical and experimental characterization of thermo-refractive noise in high quality factor ($Q$), small mode volume ($V$) optical microcavities. Analogous to well-studied stability limits imposed by Brownian motion in macroscopic Fabry-Perot resonators, microcavity thermo-refractive noise gives rise to a mode volume-dependent maximum effective quality factor. State-of-the-art fabricated microcavities are found to be within one order of magnitude of this bound. We confirm the assumptions of our theory by measuring the noise spectrum of high-$Q/V$ silicon photonic crystal…
Transmission properties of one-dimensional lossy photonic crystals composed of negative and positive refractive index layers with one lossless defect layer at the center of the crystal are investigated by the characteristic matrix method. The results show that as the refractive index and thickness of the defect layer increase the frequency of the defect mode decreases. In addition, it is shown that the frequency of the defect mode is sensitive to the incidence angle, polarization and physical properties of the defect layer but it is insensitive to the small lattice loss factor. The height of t…
We propose and analyze a family of nanoscale cavities for electrically-pumped surface-emitting semiconductor lasers that use surface plasmons to provide optical mode confinement in cavities which have dimensions in the 100-300 nm range. The proposed laser cavities are in many ways nanoscale optical versions of micropatch antennas that are commonly used at microwave/RF frequencies. Surface plasmons are not only used for mode confinement but also for output beam shaping to realize single-lobe far-field radiation patterns with narrow beam waists from subwavelength size cavities. We identify the c…
Optical properties and sensing capabilities of fused silica microbubbles were studied numerically using a finite element method. Mode characteristics, such as quality factor (Q) and effective refractive index, were determined for different bubble diameters and shell thicknesses. For sensing applications with whispering gallery modes (WGMs), thinner shells yield improved sensitivity. However, the Q-factor decreases with reduced thickness and this limits the final resolution. Three types of sensing applications with microbubbles, based on their optimized geometrical parameters, were studied. Her…
In this paper, we report a capillary-based M-Z interferometer that could be used for precise detection of variations in refractive indices of gaseous samples. This sensing mechanism is quite straightforward. Cladding and core modes of a capillary are simultaneously excited by coupling coherent laser beams to the capillary cladding and core, respectively. Interferogram would be generated as the light transmitted from the core interferes with the light transmitted from the cladding. Variations in refractive index of the air filling the core lead to variations in phase difference between the core…
Electromagnetic metamaterials, made from arrangements of subwavelength sized structures, can be used to manipulate radiation. Designing metamaterials that have a positive refractive index along one axis and a negative refractive index along the orthogonal axis can result in birefringences, $Δn>1$. The effect can be used to create wave plates with subwavelength thicknesses. Previous attempts at making wave plates in this way have resulted in very narrow usable bandwidths. In this paper, we use the Pancharatnam method to increase the usable bandwidth. A combination of Finite Element Method and T…
Refractive Index Dispersion Fingerprinting via Scanning-Free Parallel Multi-Wavelength SPR on a Single Aluminum Film
School of Optoelectronic Engineering and Instrumentation Science, Dalian University of Technology（大连理工大学光电工程学院）；DUT-BSU Joint Institute, Dalian University of Technology（大连理工大学-莫斯科鲍曼国立技术大学联合学院）；Institute of Energy, Higher School of High Voltage Engineering, Peter the Great St. Petersburg Polytechnic University（彼得大帝圣彼得堡理工大学高等电压工程学院能源研究所）
Polymeric materials are prized for their formability, low density, and functional versatility. However, the refractive indices of common polymers fall in a relatively narrow range between 1.4 and 1.6. Here, we demonstrate that loading commercially-available polymers with large concentrations of a plant-based pigment can effectively enhance their refractive index.For polystyrene loaded with 67w/w\% $β$-carotene, we achieve a peak value of 2.2 near the absorption edge at $531~\mathrm{nm}$, while maintaining values above 1.75 across longer wavelengths of the visible spectrum. Despite high pigment…
Plasmonics offer an exciting way to mediate the interaction between light and matter, allowing strong field enhancement and confinement, large absorption and scattering at resonance. However, simultaneous realization of ultra-narrow band perfect absorption and electromagnetic field enhancement is challenging due to the intrinsic high optical losses and radiative damping in metals. Here, we propose an all-metal plasmonic absorber with an absorption bandwidth less than 8nm and polarization insensitive absorptivity exceeding 99%. Unlike traditional Metal-Dielectric-Metal configurations, we demons…
We report our recent development in pursuing high Quality-Factor (high-Q factor) plasmonic resonances, with vertically aligned two dimensional (2-D) periodic nanorod arrays. The 2-D vertically aligned nano-antenna array can have high-Q resonances varying arbitrarily from near infrared to terahertz regime, as the antenna resonances of the nanorod are highly tunable through material properties, the length of the nanorod, and the orthogonal polarization direction with respect to the lattice surface,. The high-Q in combination with the small optical mode volume gives a very high Purcell factor, wh…
We propose a novel physical mechanism based on periodic non-Hermitian potentials to efficiently control the complex spatial dynamics of broad-area lasers, particularly in Vertical-Cavity Surface-Emitting Lasers (VCSELs), achieving a stable emission of maximum brightness. Radially dephased periodic refractive index and gain-loss modulations accumulate the generated light from the entire active layer and concentrate it around the structure axis to emit narrow, bright beams. The effect is due to asymmetric-inward radial coupling between transverse modes, for particular phase differences of the re…
Differential phase contrast interior tomography allows for reconstruction of a refractive index distribution over a region of interest (ROI) for visualization and analysis of internal structures inside a large biological specimen. In this imaging mode, x-ray beams target the ROI with a narrow beam aperture, offering more imaging flexibility at less ionizing radiation. Inspired by recently developed compressive sensing theory, in numerical analysis framework, we prove that exact interior reconstruction can be achieved on an ROI via the total variation minimization from truncated differential pr…
It is well known that the strongly deformed microcavity with fully chaotic ray dynamics cannot support high-Q modes due to its fast chaotic diffusion to the critical line of refractive emission. Here, we investigate how the Q factor is modified when two chaotic cavities are coupled, and show that some modes, whose Q factor is about 10 times higher than that of the corresponding single cavity, can exist. These abnormal high-Q modes are the result of an optimal combination of coupling and cavity geometry. As an example, in the coupled stadium-shaped microcavities, the mode pattern extends over b…
A route toward lineshape engineering of Fano resonances in photonic structures is theoretically proposed, which uses dynamic modulation of the refractive index of a microcavity. The method is exemplified by considering coupled-resonator optical waveguide systems. An exact Floquet analysis, based on coupled-mode theory, is presented. Two distinct kinds of resonances can be dynamically created, depending on whether the static structure sustains a localized mode or not. In the former case a single Fano resonance arises, which can be tuned in both frequency and line width by varying the refractive…
Hyperuniform disordered photonic materials have recently been shown to display large, complete photonic band gaps and isotropic optical properties, and are emerging as strong candidates for a plethora of optoelectronic applications, making them competitive with many of their periodic and quasiperiodic counterparts. In this work, high quality factor optical cavities in hyperuniform disordered architectures are fabricated through semiconductor slabs and experimentally addressed by scanning near-field optical microscopy. The wide range of confined cavity modes that we detect arise from carefully …
Materials combining both a high refractive index and a wide band gap are of great interest for optoelectronic and sensor applications. However, these two properties are typically described by an inverse correlation with high refractive index appearing in small gap materials and vice-versa. Here, we conduct a first-principles high-throughput study on more than 4000 semiconductors (with a special focus on oxides). Our data confirm the general inverse trend between refractive index and band gap but interesting outliers are also identified. The data are then analyzed through a simple model involvi…
The recent discovery of color centers with optically addressable spin states in 3C silicon carbide (SiC) similar to the negatively charged nitrogen vacancy center in diamond has the potential to enable the integration of defect qubits into established wafer scale device architectures for quantum information and sensing applications. Here we demonstrate the design, fabrication, and characterization of photonic crystal cavities in 3C SiC films with incorporated ensembles of color centers and quality factor (Q) to mode volume ratios similar to those achieved in diamond. Simulations show that opti…
