Wireless Sensor Networks (WSNs) are groups of spatially distributed and dedicated autonomous sensors for monitoring (and recording) the physical conditions of the environment (and organizing the collected data at a central location). They have been a topic of interest due to their versatility and diverse capabilities despite having simple sensors measuring local quantities such as temperature, pH, or pressure. We delve into understanding how such networks can be utilized for localization, and propose a technique for improving conditions of living for animals and humans on the IIT Bombay campus.
Wireless Charger Networking for Mobile Devices: Fundamentals, Standards, and Applications
无线充电是一种通过气隙向电气设备传输电力以补充能量的技术。最近，无线充电技术在效率和功能方面已经显著进步。本文首先介绍了无线充电的概述和基本原理。然后，我们提供标准的审查，即，Qi和Alliance for Wireless Power（A4WP），并重点介绍其通信协议。接下来，我们提出了一种无线充电器联网的新概念，它允许充电器连接，以便于信息收集和控制。我们展示了无线充电器网络在用户充电器分配中的应用，这清楚地表明了用户在确定最佳充电器以为其移动设备补充能量方面降低成本的好处。
Congestion control and avoidance in Wireless Sensor Networks (WSNs) is a subject that has attracted a lot of research attention in the last decade. Besides rate and resource control, the utilization of mobile nodes has also been suggested as a way to control congestion. In this work, we present a Mobile Congestion Control (MobileCC) algorithm with two variations, to assist existing congestion control algorithms in facing congestion in WSNs. The first variation employs mobile nodes that create locally-significant alternative paths leading to the sink. The second variation employs mobile nodes t…
The emerging edge caching provides an effective way to reduce service delay for mobile users. However, due to high deployment cost of edge hosts, a practical problem is how to achieve minimum delay under a proper edge deployment strategy. In this letter, we provide an analytical framework for delay optimal mobile edge deployment in a partially connected wireless network, where the request files can be cached at the edge hosts and cooperatively transmitted through multiple base stations. In order to deal with the heterogeneous transmission requirements, we separate the entire transmission into …
Recent advances in software-defined mobile networks (SDMNs), in-network caching, and mobile edge computing (MEC) can have great effects on video services in next generation mobile networks. In this paper, we jointly consider SDMNs, in-network caching, and MEC to enhance the video service in next generation mobile networks. With the objective of maximizing the mean measurement of video quality, an optimization problem is formulated. Due to the coupling of video data rate, computing resource, and traffic engineering (bandwidth provisioning and paths selection), the problem becomes intractable in…
Mobile edge computing (MEC) has attracted great interests as a promising approach to augment computational capabilities of mobile devices. An important issue in the MEC paradigm is computation offloading. In this paper, we propose an integrated framework for computation offloading and interference management in wireless cellular networks with mobile edge computing. In this integrated framework, the MEC server makes the offloading decision according to the local computation overhead estimated by all user equipments (UEs) and the offloading overhead estimated by the MEC server itself. Then, the …
The integration of Mobile Edge Computing (MEC) and Wireless Power Transfer (WPT), which is usually referred to as Wireless Powered Mobile Edge Computing (WP-MEC), has been recognized as a promising technique to enhance the lifetime and computation capacity of wireless devices (WDs). Compared to the conventional battery-powered MEC networks, WP-MEC brings new challenges to the computation scheduling problem because we have to jointly optimize the resource allocation in WPT and computation offloading. In this paper, we consider the energy minimization problem for WP-MEC networks with multiple WD…
This paper analyzes the localization outage probability (LOP), the probability that the position error exceeds a given threshold, in randomly deployed wireless networks. Two typical cases are considered: a mobile agent uses all the neighboring anchors or select the best pair of anchors for self-localization. We derive the exact LOP for the former case and tight bounds for the LOP for the latter case. The comparison between the two cases reveals the advantage of anchor selection in terms of LOP versus complexity tradeoff, providing insights into the design of efficient localization systems.
Offloading computation to a mobile cloud is a promising solution to augment the computation capabilities of mobile devices. In this paper we consider selfish mobile devices in a dense wireless network, in which individual mobile devices can offload computations via multiple access points (APs) to a mobile cloud so as to minimize their computation costs, and we provide a game theoretical analysis of the problem. We show that in the case of an elastic cloud, all improvement paths are finite, and thus a pure strategy Nash equilibrium exists and can be computed easily. In the case of a non-elastic…
The position of the base station (BS) in wireless sensor networks (WSNs) has a significant impact on network lifetime. This paper suggests a mobile BS positioning algorithm for cluster-based WSNs, which considers both the location and the remaining energy level of the cluster heads in the network and evaluate the performance of the algorithm under different values of network sizes, including 100m x 100m, 200m x 200m and 300m x 300m. Simulations are conducted by using OMNeT++ and proposed method is compared with two different static BS positions, including central and external, on HEED protocol…
In mobile computation offloading (MCO), mobile devices (MDs) can choose to either execute tasks locally or to have them executed on a remote edge server (ES). This paper addresses the problem of assigning both the wireless communication bandwidth needed, along with the ES capacity that is used for the task execution, so that task completion time constraints are satisfied. The objective is to obtain these allocations so that the average power consumption of the mobile devices is minimized, subject to a cost budget constraint. The paper includes contributions for both soft and hard task completi…
In energy-constrained wireless sensor networks (WSNs), maximizing the data collection using mobile sink(s) with minimum energy consumption is one of the practical challenging issues. In this article, we consider the problem of efficient data collection along with a pre-specified path using a mobile sink with constant speed. We refer the problem as a Maximizing data gathering with minimum energy consumption (MDGMEC) problem. So far, existing works have heuristic algorithms for MDGMEC problem. Therefore, based on network flow optimization approach, we propose a deterministic algorithm called dat…
Jamming attacks could cause severe damage to Wireless Sensor Networks (WSNs). Once jamming attack occurs, the most urgent work is to get the position information of the jammer. Then safety measures to eliminate the jamming effects can be devised. In this paper, the jammer localization is conducted by geometric covering method to achieve a low energy consumption. And utilizing the power of the jamming signal received by the boundary nodes, a compensating method is composed to reduce the estimating error of the jamming area. At last the localization is conducted by extracting the minimum coverin…
The last years have witnessed a dramatic growth in the number as well as the variety of graphics intensive mobile applications, which allow users to interact and navigate through large scenes such as ancient places, museums and even virtual cities. These applications support many clients and impose a heavy requirement on network resources and computational resources. One key issue in the design of cost efficient mobile walkthrough applications is the data transmission between servers and mobile client devices. In this paper, we propose an effective progressive mesh transmission framework that …
In this paper, a comprehensive survey of the pioneer as well as the state of-the-art localization and tracking methods in the wireless sensor networks is presented. Localization is mostly applicable for the static sensor nodes, whereas, tracking for the mobile sensor nodes. The localization algorithms are broadly classified as range-based and range-free methods. The estimated range (distance) between an anchor and an unknown node is highly erroneous in an indoor scenario. This limitation can be handled up to a large extent by employing a large number of existing access points (APs) in the rang…
With the rapid increase in demand for mobile data, mobile network operators are trying to expand wireless network capacity by deploying wireless local area network (LAN) hotspots on which they can offload their mobile traffic. However, these network-centric methods usually do not fulfill the interests of mobile users (MUs). Taking into consideration many issues, MUs should be able to decide whether to offload their traffic to a complementary wireless LAN. Our previous work studied single-flow wireless LAN offloading from a MU's perspective by considering delay-tolerance of traffic, monetary co…
Indoor localization is a cornerstone of mobile services. Until now most of the research effort has focused on achieving sub-meter localization accuracy because many mobile applications depend on precise localization measurements. In some scenarios, however, it is required to trade location accuracy for system maintainability. For example, in large-scale deployments of indoor networks, such as item-monitoring in smart buildings, attaining room-level localization accuracy may be sufficient, but replacing the batteries of the devices used for localization could lead to high operational costs. As …
In the recent years, there has been a huge advancement in wireless sensor computing technology. Today, wireless sensor network (WSN) has become a key technology for different types of smart environment. Nodes localization in WSN has arisen as a very challenging problem in the research community. Most of the applications for WSN are not useful without a priory known nodes positions. Adding GPS receivers to each node is an expensive solution and inapplicable for indoor environments. In this paper, we implemented and evaluated an algorithm based on multidimensional scaling (MDS) technique for thr…
In this paper we have proposed clock error mitigation from the measurements in the scheduled based self localization system. We propose measurement model with clock errors while following a scheduled transmission among anchor nodes. Further, RLS algorithm is proposed to estimate clock error and to calibrate measurements of self localizing node against relative clock errors of anchor nodes. A full-scale experimental validation is provided based on commercial off-the-shelf UWB radios under IEEE-standardized protocols.
An Efficient Hybrid Localization Technique in Wireless Sensor Networks
传感器节点是低成本、低功耗的设备，用于从远程位置收集物理数据和监测环境条件。无线传感器网络（Wireless Sensor Networks，WSN）是一组传感器节点的集合，它们相互协调以执行特定的任务。定位被定义为在网络中的已知位置的传感器节点的部署。本地化技术分为集中式和分布式。MDS-Map和SDP属于集中式算法，而Diffusion、Gradient、APIT、限界框、Relaxation-Based和Coordinate System Stitching属于分布式算法。在本文中，我们提出了一种新的混合定位技术，它结合了集中式和分布式算法的优点，并克服了现有技术的一些缺点。通过J-Sim仿真证明了该方案在通过改变汇聚节点、增加节点密度和增加通信范围来计算定位误差方面的优势。
