Last decades of humanoid research has shown that humanoids developed for high dynamic performance require a stiff structure and optimal distribution of mass--inertial properties. Humanoid robots built with a purely tree type architecture tend to be bulky and usually suffer from velocity and force/torque limitations. This paper presents a novel series-parallel hybrid humanoid called RH5 which is 2 m tall and weighs only 62.5 kg capable of performing heavy-duty dynamic tasks with 5 kg payloads in each hand. The analysis and control of this humanoid is performed with whole-body trajectory optimization technique based on differential dynamic programming (DDP). Additionally, we present an improved contact stability soft-constrained DDP algorithm which is able to generate physically consistent walking trajectories for the humanoid that can be tracked via a simple PD position control in a physics simulator. Finally, we showcase preliminary experimental results on the RH5 humanoid robot.
Istituto Italiano di Tecnologia（意大利理工学院）；University of Genova（热那亚大学）；The University of Manchester（曼彻斯特大学）
Humanoid robot teleoperation allows humans to integrate their cognitive capabilities with the apparatus to perform tasks that need high strength, manoeuvrability and dexterity. This paper presents a framework for teleoperation of humanoid robots using a novel approach for motion retargeting through inverse kinematics over the robot model. The proposed method enhances scalability for retargeting, i.e., it allows teleoperating different robots by different human users with minimal changes to the proposed system. Our framework enables an intuitive and natural interaction between the human operato…
Planning balanced and collision-free motion for humanoid robots is non-trivial, especially when they are operated in complex environments, such as reaching targets behind obstacles or through narrow passages. We propose a method that allows us to apply existing sampling--based algorithms to plan trajectories for humanoids by utilizing a customized state space representation, biased sampling strategies, and a steering function based on a robust inverse kinematics solver. Our approach requires no prior offline computation, thus one can easily transfer the work to new robot platforms. We tested t…
Balancing and reacting to strong and unexpected pushes is a critical requirement for humanoid robots. We recently designed a capture point based approach which interfaces with a momentum-based torque controller and we implemented and validated it on the iCub humanoid robot. In this work we implement a Receding Horizon control, also known as Model Predictive Control, to add the possibility to predict the future evolution of the robot, especially the constraints switching given by the hybrid nature of the system. We prove that the proposed MPC extension makes the step-recovery controller more ro…
This work presents a teleoperated humanoid robot system that can imitate human motions, walk and turn. To capture human motions, a Microsoft Kinect Depth sensor is used. Unlike the cumbersome motion capture suits, the sensor makes the system more comfortable to interact with. The skeleton data is extracted from the Kinect which is processed to generate the robot's joint angles. Robot Operating System (ROS) is used for the communication between the various parts of the code to achieve minimal latency. Thus the robot imitates the human in real-time with negligible lag. Unlike most of the human m…
Robotics Research Center IIIT Hyderabad（国际信息技术研究所海得拉巴机器人研究中心）
Real time calculation of inverse kinematics (IK) with dynamically stable configuration is of high necessity in humanoid robots as they are highly susceptible to lose balance. This paper proposes a methodology to generate joint-space trajectories of stable configurations for solving inverse kinematics using Deep Reinforcement Learning (RL). Our approach is based on the idea of exploring the entire configuration space of the robot and learning the best possible solutions using Deep Deterministic Policy Gradient (DDPG). The proposed strategy was evaluated on the highly articulated upper body of a…
University of Illinois at Urbana-Champaign（伊利诺伊大学厄巴纳-香槟分校）；Carnegie Mellon University（卡内基梅隆大学）
Bilateral teleoperation provides humanoid robots with human planning intelligence while enabling the human to feel what the robot feels. It has the potential to transform physically capable humanoid robots into dynamically intelligent ones. However, dynamic bilateral locomotion teleoperation remains as a challenge due to the complex dynamics it involves. This work presents our initial step to tackle this challenge via the concept of wheeled humanoid robot locomotion teleoperation by body tilt. Specifically, we developed a force-feedback-capable whole-body human-machine interface (HMI), and des…
Fondazione Istituto Italiano di Tecnologia（意大利技术研究院）
This paper contributes towards the development and comparison of Divergent-Component-of-Motion (DCM) based control architectures for humanoid robot locomotion. More precisely, we present and compare several DCM based implementations of a three layer control architecture. From top to bottom, these three layers are here called: trajectory optimization, simplified model control, and whole-body QP control. All layers use the DCM concept to generate references for the layer below. For the simplified model control layer, we present and compare both instantaneous and Receding Horizon Control controll…
Istituto Italiano di Tecnologia（意大利理工学院）；University of Genoa（热那亚大学）
This manuscript presents a model of compliant contacts for time-critical humanoid robot motion control. The proposed model considers the environment as a continuum of spring-damper systems, which allows us to compute the equivalent contact force and torque that the environment exerts on the contact surface. We show that the proposed model extends the linear and rotational springs and dampers - classically used to characterize soft terrains - to the case of large contact surface orientations. The contact model is then used for the real-time whole-body control of humanoid robots walking on visco…
Karlsruhe Institute of Technology (KIT)（卡尔斯鲁厄理工学院）
Gaze stabilization is fundamental for humanoid robots. By stabilizing vision, it enhances perception of the environment and keeps points of interest in the field of view. In this contribution, a multimodal gaze stabilization combining classic inverse kinematic control with vestibulo-ocular and optokinetic reflexes is introduced. Inspired by neuroscience, it implements a forward model that can modulate the reflexes based on the reafference principle. This principle filters self-generated movements out of the reflexive feedback loop. The versatility and effectiveness of this method are experimen…
We introduce a new, analytical method for generating whole-body motions for humanoid robots, which approximate the desired Composite Rigid Body (CRB) inertia. Our approach uses a reduced five mass model, where four of the masses are attributed to the limbs and one is used for the trunk. This compact formulation allows for finding an analytical solution that combines the kinematics with mass distribution and inertial properties of a humanoid robot. The positioning of the masses in Cartesian space is then directly used to obtain joint angles with relations based on simple geometry. Motions are a…
Istituto Italiano di Tecnologia（意大利理工学院）；Università degli Studi di Genova（热那亚大学）；Google DeepMind（谷歌DeepMind）
A common approach to the generation of walking patterns for humanoid robots consists in adopting a layered control architecture. This paper proposes an architecture composed of three nested control loops. The outer loop exploits a robot kinematic model to plan the footstep positions. In the mid layer, a predictive controller generates a Center of Mass trajectory according to the well-known table-cart model. Through a whole-body inverse kinematics algorithm, we can define joint references for position controlled walking. The outcomes of these two loops are then interpreted as inputs of a stack-…
Istituto Italiano di Tecnologia（意大利理工学院）；University of Genoa（热那亚大学）；University of Manchester（曼彻斯特大学）
This paper presents a Non-Linear Model Predictive Controller for humanoid robot locomotion with online step adjustment capabilities. The proposed controller considers the Centroidal Dynamics of the system to compute the desired contact forces and torques and contact locations. Differently from bipedal walking architectures based on simplified models, the presented approach considers the reduced centroidal model, thus allowing the robot to perform highly dynamic movements while keeping the control problem still treatable online. We show that the proposed controller can automatically adjust the …
Italian Institute of Technology（意大利技术研究院）；University of Manchester（曼彻斯特大学）；University of Genoa（热那亚大学）
The paper presents a planner to generate walking trajectories by using the centroidal dynamics and the full kinematics of a humanoid robot. The interaction between the robot and the walking surface is modeled explicitly via new conditions, the \emph{Dynamical Complementarity Constraints}. The approach does not require a predefined contact sequence and generates the footsteps automatically. We characterize the robot control objective via a set of tasks, and we address it by solving an optimal control problem. We show that it is possible to achieve walking motions automatically by specifying a m…
Italian Institute of Technology（意大利理工学院）；University of Genoa（热那亚大学）
Extended Kalman filtering is a common approach to achieve floating base estimation of a humanoid robot. These filters rely on measurements from an Inertial Measurement Unit (IMU) and relative forward kinematics for estimating the base position-and-orientation and its linear velocity along with the augmented states of feet position-and-orientation, thus giving them their name, flat-foot filters. However, the availability of only partial measurements often poses the question of consistency in the filter design. In this paper, we perform an experimental comparison of state-of-the-art flat-foot fi…
PolygMap: A Perceptive Locomotion Framework for Humanoid Robot Stair Climbing
The Shenzhen Institute of Artificial Intelligence and Robotics for Society（深圳人工智能与机器人社会研究院）；Electronic science and technology, Guangdong University of Technology（广东技术大学电子科学与技术学院）；Leju robotics（乐居机器人）
Fondazione Istituto Italiano di Tecnologia（意大利技术研究院基金会）；Università di Genova（热那亚大学）
Humanoid robots are machines built with an anthropomorphic shape. Despite decades of research into the subject, it is still challenging to tackle the robot locomotion problem from an algorithmic point of view. For example, these machines cannot achieve a constant forward body movement without exploiting contacts with the environment. The reactive forces resulting from the contacts are subject to strong limitations, complicating the design of control laws. As a consequence, the generation of humanoid motions requires to exploit fully the mathematical model of the robot in contact with the envir…
Italian Institute of Technology（意大利理工学院）；University of Genoa（热那亚大学）；University of Waterloo（滑铁卢大学）
This paper presents a contact-aided inertial-kinematic floating base estimation for humanoid robots considering an evolution of the state and observations over matrix Lie groups. This is achieved through the application of a geometrically meaningful estimator which is characterized by concentrated Gaussian distributions. The configuration of a floating base system like a humanoid robot usually requires the knowledge of an additional six degrees of freedom which describes its base position-and-orientation. This quantity usually cannot be measured and needs to be estimated. A matrix Lie group, e…
The paper takes the first step towards the de- velopment of a control framework for underactuated flying humanoid robots. These robots may thus have the capacities of flight, contact locomotion, and manipulation, and benefit from technologies and methods developed for Whole-Body Control and Aerial Manipulation. As in the case of quadrotors, we as- sume that the humanoid robot is powered by four thrust forces. For convenience, these forces are placed at the robot hands and feet. The control objective is defined as the asymptotic stabilization of the robot centroidal momentum. This objective all…
E2H: A Two-Stage Non-Invasive Neural Signal Driven Humanoid Robotic Whole-Body Control Framework
University of Technology Sydney（悉尼科技大学）；The Hong Kong University of Science and Technology（香港科技大学）；Beijing Innovation Center of Humanoid Robotics（北京人形机器人创新中心）
Proprioceptive-visual correspondence enables self-other distinction in humanoid robots
Eastern Institute of Technology, Ningbo（宁波东方理工大学）；Shanghai Jiao Tong University（上海交通大学）；Peking University（北京大学）；Carnegie Mellon University（卡内基梅隆大学）；East China Normal University（华东师范大学）；Ningbo Institute of Digital Twin（宁波数字孪生研究院）
MASH: Cooperative-Heterogeneous Multi-Agent Reinforcement Learning for Single Humanoid Robot Locomotion
Faculty of Robot Science and Engineering, Northeastern University（机器人科学与工程学院，东北大学）；Guangdong Key Laboratory of Intelligent Morphing Mechanisms and Adaptive Robotics and School of Intelligence Science and Engineering, the Harbin Institute of Technology Shenzhen（智能变形机制与适应机器人重点实验室和智能科学与工程学院，哈尔滨工业大学深圳）
This paper presents a novel method to control humanoid robot dynamic loco-manipulation with multiple contact modes via multi-contact Model Predictive Control (MPC) framework. The proposed framework includes a multi-contact dynamics model capable of capturing various contact modes in loco-manipulation, such as hand-object contact and foot-ground contacts. Our proposed dynamics model represents the object dynamics as an external force acting on the system, which simplifies the model and makes it feasible for solving the MPC problem. In numerical validations, our multi-contact MPC framework only …
Unified Multi-Rate Model Predictive Control for a Jet-Powered Humanoid Robot
Artificial and Mechanical Intelligence, Istituto Italiano di Tecnologia（人工智能与机械智能研究所）；School of Computer Science, University of Manchester（曼彻斯特大学计算机科学学院）
The Cloud-based Advanced Robotics Laboratory (CARL) integrates a whole body controller and web-based teleoperation to enable any device with a web browser to access and control a humanoid robot. By integrating humanoid robots with the cloud, they are accessible from any Internet-connected device. Increased accessibility is important because few people have access to state-of-the-art humanoid robots limiting their rate of development. CARL's implementation is based on modern software libraries, frameworks, and middleware including Node.js, Socket.IO, ZMQ, ROS, Robot Web Tools, and ControlIt! Fe…
A common architecture for torque controlled humanoid robots consists in two nested loops. The outer loop generates desired joint/motor torques, and the inner loop stabilises these desired values. In doing so, the inner loop usually compensates for joint friction phenomena, thus removing their inherent stabilising property that may be also beneficial for high level control objectives. This paper shows how to exploit friction for joint and task space control of humanoid robots. Experiments are carried out using the humanoid robot iCub.
In this paper, a combination of ankle and hip strategy is used for push recovery of a position-controlled humanoid robot. Ankle strategy and hip strategy are equivalent to Center of Pressure (CoP) and Centroidal Moment Pivot (CMP) regulation respectively. For controlling the CMP and CoP we need a torque-controlled robot, however most of the conventional humanoid robots are position controlled. In this regard, we present an efficient way for implementation of the hip and ankle strategies on a position controlled humanoid robot. We employ a feedback controller to compensate the capture point err…
Our research explores the potential of a humanoid robot for work in unpredictable environments, but controlling a humanoid robot remains a very difficult problem. In our previous work, we designed a prototype virtual reality (VR) interface to allow an operator to command a humanoid robot. However, while usable, the initial interface was not sufficient for commanding the robot to perform the tasks; for example, in some cases, there was a lack of precision available for robot control. The interface was overly cumbersome in some areas as well. In this paper, we discuss numerous additions, inspire…
This position paper introduces the results of an initial card sorting experiment based on the reactions and questions of a group of children with autism working with a humanoid robot in a therapeutic laboratory on autonomy.
This paper describes the development of a humanoid robot called ARDOP. The goal of the project is to provide a modular, open-source, and inexpensive humanoid robot that would enable researchers to answer various problems related to robotic manipulation and perception. ARDOP primarily comprises of two functional units namely the perception and manipulation system, here we discuss the conceptualization and design methodology of these systems and proceed to present their performance results on simulation and various custom-designed experiments.
Forthcoming applications concerning humanoid robots may involve physical interaction between the robot and a dynamic environment. In such scenario, classical balancing and walking controllers that neglect the environment dynamics may not be sufficient for achieving a stable robot behavior. This paper presents a modeling and control framework for balancing humanoid robots in contact with a dynamic environment. We first model the robot and environment dynamics, together with the contact constraints. Then, a control strategy for stabilizing the full system is proposed. Theoretical results are ver…
Most humanoid robots have highly complicated structure and design of robots that are very similar to human is extremely difficult. In this paper, modelling of a general and comprehensive algorithm for control of humanoid robots is presented using Colored Petri Nets. For keeping dynamic balance of the robot, combination of Gyroscope and Accelerometer sensors are used in algorithm. Image processing is used to identify two fundamental issues: first, detection of target or an object which robot must follow; second, detecting surface of the ground so that walking robot could maintain its balance ju…
Istituto Italiano di Tecnologia（意大利理工学院）；Florida Institute for Human and Machine Cognition（佛罗里达人机认知研究所）；University of Illinois at Urbana-Champaign（伊利诺伊大学厄巴纳-香槟分校）；National Institute of Advanced Industrial Science and Technology (AIST)（日本产业技术综合研究所）；Inria（法国国家信息与自动化研究所）；Université de Lorraine（洛林大学）；CNRS（法国国家科学研究中心）；Tokyo University of Science（东京理科大学）
Teleoperation of humanoid robots enables the integration of the cognitive skills and domain expertise of humans with the physical capabilities of humanoid robots. The operational versatility of humanoid robots makes them the ideal platform for a wide range of applications when teleoperating in a remote environment. However, the complexity of humanoid robots imposes challenges for teleoperation, particularly in unstructured dynamic environments with limited communication. Many advancements have been achieved in the last decades in this area, but a comprehensive overview is still missing. This s…
Istituto Italiano di Tecnologia（意大利理工学院）；The University of Manchester（曼彻斯特大学）
When a human and a humanoid robot collaborate physically, ergonomics is a key factor to consider. Assuming a given humanoid robot, several control architectures exist nowadays to address ergonomic physical human-robot collaboration. This paper takes one step further by considering robot hardware parameters as optimization variables in the problem of collaborative payload lifting. The variables that parametrize robot's kinematics and dynamics ensure their physical consistency, and the human model is considered in the optimization problem. By leveraging the proposed modelling framework, the ergo…
The use of standard robotic platforms can accelerate research and lower the entry barrier for new research groups. There exist many affordable humanoid standard platforms in the lower size ranges of up to 60cm, but larger humanoid robots quickly become less affordable and more difficult to operate, maintain and modify. The igus Humanoid Open Platform is a new and affordable, fully open-source humanoid platform. At 92cm in height, the robot is capable of interacting in an environment meant for humans, and is equipped with enough sensors, actuators and computing power to support researchers in m…
National Institute of Applied Sciences and Technology（国家应用科学与技术学院）
In this paper, the dynamic modeling of a seven linked humanoid robot, is accurately developed, in the three dimensional space using the Newton-Euler formalism. The aim of this study is to provide a clear and a systematic approach so that starting from generalized motion equations of all rigid bodies of the humanoid robot one can establish a reduced dynamical model. The resulting model can be expended either for simulation propositions or implemented for any given control law. In addition, transformations and developments, proposed here, can be exploited for modeling any other three-dimensional…
Artificial and Mechanical Intelligence, Istituto Italiano di Tecnologia（人工智能与机械智能，意大利技术研究院）；School of Computer Science, University of Manchester（计算机科学学院，曼彻斯特大学）；Department of Industrial Engineering, University of Naples Federico II（工业工程系，那不勒斯费德里克二世大学）
