We study a heterogeneous wireless sensor network (WSN) where N heterogeneous access points (APs) gather data from densely deployed sensors and transmit their sensed information to M heterogeneous fusion centers (FCs) via multi-hop wireless communication. This heterogeneous node deployment problem is modeled as an optimization problem with total wireless communication power consumption of the network as its objective function. We consider both static WSNs, where nodes retain their deployed position, and mobile WSNs where nodes can move from their initial deployment to their optimal locations. Based on the derived necessary conditions for the optimal node deployment in static WSNs, we propose an iterative algorithm to deploy nodes. In addition, we study the necessary conditions of the optimal movement-efficient node deployment in mobile WSNs with constrained movement energy, and present iterative algorithms to find such deployments, accordingly. Simulation results show that our proposed node deployment algorithms outperform the existing methods in the literature, and achieves a lower total wireless communication power in both static and mobile WSNs, on average.
Integrating mobile edge computing (MEC) and wireless power transfer (WPT) has been regarded as a promising technique to improve computation capabilities for self-sustainable Internet of Things (IoT) devices. This paper investigates a wireless powered multiuser MEC system, where a multi-antenna access point (AP) (integrated with an MEC server) broadcasts wireless power to charge multiple users for mobile computing. We consider a time-division multiple access (TDMA) protocol for multiuser computation offloading. Under this setup, we aim to maximize the weighted sum of the computation rates (in t…
In this paper, we derive an asymptotic closed--form expression for the error bound on extrapolation of doubly selective mobile MIMO wireless channels. The bound shows the relationship between the prediction error and system design parameters such as bandwidth, number of antenna elements, and number of frequency and temporal pilots, thereby providing useful insights into the effects of these parameters on prediction performance. Numerical simulations show that the asymptotic bound provides a good approximation to previously derived bounds while eliminating the need for repeated computation and …
We study the throughput-delay performance tradeoff in large-scale wireless ad hoc networks. It has been shown that the per source-destination pair throughput can be improved from Theta(1/sqrt(n log n)) to Theta(1) if nodes are allowed to move and a 2-hop relay scheme is employed. The price paid for such an improvement on throughput is large delay. Indeed, the delay scaling of the 2-hop relay scheme is Theta(n log n) under the random walk mobility model. In this paper, we employ coding techniques to improve the throughput-delay trade-off for mobile wireless networks. For the random walk mobilit…
A mobile wireless delay-tolerant network (DTN) model is proposed and analyzed, in which infinitely many nodes are initially placed on R^2 according to a uniform Poisson point process (PPP) and subsequently travel, independently of each other, along trajectories comprised of line segments, changing travel direction at time instances that form a Poisson process, each time selecting a new travel direction from an arbitrary distribution; all nodes maintain constant speed. A single information packet is traveling towards a given direction using both wireless transmissions and sojourns on node buffe…
Wireless surveillance is becoming increasingly important to protect the public security by legitimately eavesdropping suspicious wireless communications. This paper studies the wireless surveillance of a two-hop suspicious communication link by a half-duplex legitimate monitor. By exploring the suspicious link's two-hop nature, the monitor can adaptively choose among the following three eavesdropping modes to improve the eavesdropping performance: (I) \emph{passive eavesdropping} to intercept both hops to decode the message collectively, (II) \emph{proactive eavesdropping} via {\emph{noise jam…
In large wireless networks, acquiring full network state information is typically infeasible. Hence, nodes need to flow the information and manage the interference based on partial information about the network. In this paper, we consider multi-hop wireless networks and assume that each source only knows the channel gains that are on the routes from itself to other destinations in the network. We develop several distributed strategies to manage the interference among the users and prove their optimality in maximizing the achievable normalized sum-rate for some classes of networks.
Overheads incurred by routing protocols diminish the capacity available for relaying useful data in a mobile wireless ad hoc network. Discovering lower bounds on the amount of protocol overhead incurred for routing data packets is important for the development of efficient routing protocols, and for characterizing the actual (effective) capacity available for network users. This paper presents an information-theoretic framework for characterizing the minimum routing overheads of geographic routing in a network with mobile nodes. specifically, the minimum overhead problem is formulated as a rat…
In this paper, we propose a cross-layer scheduling algorithm that achieves a throughput "epsilon-close" to the optimal throughput in multi-hop wireless networks with a tradeoff of O(1/epsilon) in delay guarantees. The algorithm aims to solve a joint congestion control, routing, and scheduling problem in a multi-hop wireless network while satisfying per-flow average end-to-end delay guarantees and minimum data rate requirements. This problem has been solved for both backlogged as well as arbitrary arrival rate systems. Moreover, we discuss the design of a class of low-complexity suboptimal algo…
We consider a time-slotted two-hop wireless system in which the sources transmit to the relays in the even time slots (first hop) and the relays forward the packets to the destinations in the odd time slots (second hop). Each source may connect to multiple relays in the first hop. In the presence of interference and without tight coordination of the relays, it is not clear which relays should transmit the packet. We propose four decentralized methods of relay selection, some based on location information and others based on the received signal strength (RSS). We provide a complete analytical c…
We consider one-hop communication in wireless networks with random connections. In the random connection model, the channel powers between different nodes are drawn from a common distribution in an i.i.d. manner. An scheme achieving the throughput scaling of order $n^{1/3-δ}$, for any $δ>0$, is proposed, where $n$ is the number of nodes. Such achievable throughput, along with the order $n^{1/3}$ upper bound derived by Cui et al., characterizes the throughput capacity of one-hop schemes for the class of connection models with finite mean and variance.
In this paper, a cooperative localization algorithm is proposed that considers the existence of obstacles in mobilityassisted wireless sensor networks (WSNs). In this scheme, a mobile anchor (MA) node cooperates with static sensor nodes and moves actively to refine location performance. The localization accuracy of the proposed algorithm can be improved further by changing the transmission range of mobile anchor node. The algorithm takes advantage of cooperation betweenMAs and static sensors while, at the same time, taking into account the relay node availability to make the best use of beacon…
Studying the capacity of wireless multi-hop networks is an important problem and extensive research has been done in the area. In this letter, we sift through various capacity-impacting parameters and show that the capacity of both static and mobile networks is fundamentally determined by the average number of simultaneous transmissions, the link capacity and the average number of transmissions required to deliver a packet to its destination. We then use this result to explain and help to better understand existing results on the capacities of static networks, mobile networks and hybrid networ…
Achieving long battery lives or even self sustainability has been a long standing challenge for designing mobile devices. This paper presents a novel solution that seamlessly integrates two technologies, mobile cloud computing and microwave power transfer (MPT), to enable computation in passive low-complexity devices such as sensors and wearable computing devices. Specifically, considering a single-user system, a base station (BS) either transfers power to or offloads computation from a mobile to the cloud; the mobile uses harvested energy to compute given data either locally or by offloading.…
Now-a-days, intense research is going on two-hop wireless link under different fading conditions with its remedial measures. In this paper work, a two-hop link under three different conditions is considered: (i) MIMO on both hops, (ii) MISO in first hop and SIMO in second hop and finally (iii) SIMO in first hop and MISO in second hop. The three models used here give the flexibility of using STBC (Space Time Block Coding) and combining scheme on any of the source to relay (S- R) and relay to destination (R-D) link. Even incorporation of Transmitting Antenna Selection (TAS) is possible on any li…
We show that fully connected two-hop wireless networks with K sources, K relays and K destinations have K degrees of freedom both in the case of time-varying channel coefficients and in the case of constant channel coefficients (in which case the result holds for almost all values of constant channel coefficients). Our main contribution is a new achievability scheme which we call Aligned Network Diagonalization. This scheme allows the data streams transmitted by the sources to undergo a diagonal linear transformation from the sources to the destinations, thus being received free of interferenc…
The advancements in microwave power transfer (MPT) over past decades have enabled wireless power transfer over long distances. The latest breakthroughs in wireless communication, namely massive MIMO, small cells and millimeter-wave communication, make wireless networks suitable platforms for implementing MPT. This can lead to the elimination of the "last wires" connecting mobile devices to the grid for recharging, thereby tackling a long-standing ICT grand challenge. Furthermore, the seamless integration between MPT and wireless communication opens a new area called wirelessly powered communic…
Conventional wireless security assumes wireless communications are rightful and aims to protect them against malicious eavesdropping and jamming attacks. However, emerging infrastructure-free mobile communication networks are likely to be illegally used (e.g., by criminals or terrorists) but difficult to be monitored, thus imposing new challenges on the public security. To tackle this issue, this article presents a paradigm shift of wireless security to the surveillance and intervention of infrastructure-free suspicious and malicious wireless communications, by exploiting legitimate eavesdropp…
Two-hop wireless network serves as the basic net-work model for the study of general wireless networks, while cooperative jamming is a promising scheme to achieve the physi-cal layer security. This paper establishes a theoretical framework for the study of eavesdropper-tolerance capability (i.e., the exact maximum number of eavesdroppers that can be tolerated) in a two-hop wireless network, where the cooperative jamming is adopted to ensure security defined by secrecy outage probability (SOP) and opportunistic relaying is adopted to guarantee relia-bility defined by transmission outage probabi…
We study broadcast capacity and minimum delay scaling laws for highly mobile wireless networks, in which each node has to disseminate or broadcast packets to all other nodes in the network. In particular, we consider a cell partitioned network under the simplified independent and identically distributed (IID) mobility model, in which each node chooses a new cell at random every time slot. We derive scaling laws for broadcast capacity and minimum delay as a function of the cell size. We propose a simple first-come-first-serve (FCFS) flooding scheme that nearly achieves both capacity and minimum…
In Fixed Wireless Applications (FWA), the Code Division Multiple Access (CDMA) is the most promising candidate for wideband data access. The reason is the soft limit on the number of active mobile devices. Many Fixed Wireless Applications impose an upper bound on the BER performance which restricts the increase in number of mobile users. The number of active mobile users or Capacity is further reduced in Multipath Fading Environment (MFE). This paper presents an effective method of improving the capacity of CDMA based Fixed Wireless Networks by using a hybrid power control algorithm. The propo…
In this paper, we consider a wireless powered mobile edge computing (MEC) network, where the distributed energy-harvesting wireless devices (WDs) are powered by means of radio frequency (RF) wireless power transfer (WPT). In particular, the WDs follow a binary computation offloading policy, i.e., data set of a computing task has to be executed as a whole either locally or remotely at the MEC server via task offloading. We are interested in maximizing the (weighted) sum computation rate of all the WDs in the network by jointly optimizing the individual computing mode selection (i.e., local comp…
In this paper, we present a novel mobile edge computing (MEC) model where the MEC server has the input and output data of all computation tasks and communicates with multiple caching-and-computing-enabled mobile devices via a shared wireless link. Each task request can be served from local output caching, local computing with input caching, local computing or MEC computing, each of which incurs a unique bandwidth requirement of the multicast link. Aiming to minimize the transmission bandwidth, we design and optimize the local caching and computing policy at mobile devices subject to latency, c…
This paper studies a wireless powered mobile edge computing (MEC) system, where a dedicated energy transmitter (ET) uses the radio-frequency (RF) signal enabled wireless power transfer (WPT) to charge wireless devices for sustainable computation. In such a system, we present a new user cooperation approach to improve the computation performance of active devices, in which surrounding idle devices are enabled as helpers to use their opportunistically harvested wireless energy from the ET to help remotely execute active users' computation tasks. In particular, we consider a basic scenario with o…
Mobile-edge computing (MEC) and wireless power transfer are technologies that can assist in the implementation of next generation wireless networks, which will deploy a large number of computational and energy limited devices. In this letter, we consider a point-to-point MEC system, where the device harvests energy from the access point's (AP's) transmitted signal to power the offloading and/or the local computation of a task. By taking into account the non-linearities of energy harvesting, we provide analytical expressions for the probability of successful computation and for the average numb…
Wireless multi-hop networks, in various forms and under various names, are being increasingly used in military and civilian applications. Studying connectivity and capacity of these networks is an important problem. The scaling behavior of connectivity and capacity when the network becomes sufficiently large is of particular interest. In this position paper, we briefly overview recent development and discuss research challenges and opportunities in the area, with a focus on the network connectivity.
Intelligent reflecting surfaces (IRSs) have received much attention recently and are envisioned to promote 6G communication networks. In this paper, for wireless communications aided by IRS units, we formulate optimization problems for power control under quality of service (QoS) and max-min fair QoS under three kinds of traffic patterns from a base station (BS) to mobile users (MUs): unicast, broadcast, and multicast. The optimizations are achieved by jointly designing the transmit beamforming of the BS and the phase shift matrix of the IRS. For power control under QoS, existing IRS studies i…
Wireless sensor networks (WSNs) are effective for locating and tracking people and objects in various industrial environments. Since energy consumption is critical to prolonging the lifespan of WSNs, we propose an energy-efficient LOcalization and Tracking} (eLOT) system, using low-cost and portable hardware to enable highly accurate tracking of targets. Various fingerprint-based approaches for localization and tracking are implemented in eLOT. In order to achieve high energy efficiency, a network-level scheme coordinating collision and interference is proposed. On the other hand, based on the…
The spectrum-rich millimeter wave (mmWave) frequencies have the potential to alleviate the spectrum crunch that the wireless and cellular operators are already experiencing. However, compared with traditional wireless communication in the sub-6 GHz bands, due to small wavelengths most objects such as human body, cause significant additional path losses (up to 20dB), which can entirely break the mmWave link. Also, mmwave links suffer from limited range of communication. In this paper, we resort to network layer solutions to demonstrate the benefits of multi-hop routing in mitigating the blockag…
Mobile edge computing (MEC) is expected to be an effective solution to deliver 360-degree virtual reality (VR) videos over wireless networks. In contrast to previous computation-constrained MEC framework, which reduces the computation-resource consumption at the mobile VR device by increasing the communication-resource consumption, we develop a communications-constrained MEC framework to reduce communication-resource consumption by increasing the computation-resource consumption and exploiting the caching resources at the mobile VR device in this paper. Specifically, according to the task modu…
Reconfigurable intelligent surface (RIS)-empowered communication is being considered as an enabling technology for sixth generation (6G) wireless networks. The key idea of RIS-assisted communication is to enhance the capacity, coverage, energy efficiency, physical layer security, and many other aspects of modern wireless networks. At the same time, mobile edge computing (MEC) has already shown its huge potential by extending the computation, communication, and caching capabilities of a standalone cloud server to the network edge. In this article, we first provide an overview of how MEC and RIS…
A wireless charging station (WCS) transfers energy wirelessly to mobile nodes within its charging region. This paper investigates the impact of node speed on the throughput of WCS overlaid mobile networks when packet transmissions are constrained by the energy status of each node. The energy provision for each node depends on its moving speed. A slow-moving node outside the charging region is unable to receive energy from WCSs for a long time, while one inside the charging region consistently recharges the battery. Reflecting on these phenomena, we design a two-dimensional Markov chain, where …
The flux of social media and the convenience of mobile connectivity has created a mobile data phenomenon that is expected to overwhelm the mobile cellular networks in the foreseeable future. Despite the advent of 4G/LTE, the growth rate of wireless data has far exceeded the capacity increase of the mobile networks. A fundamentally new design paradigm is required to tackle the ever-growing wireless data challenge. In this article, we investigate the problem of massive content delivery over wireless networks and present a systematic view on content-centric network design and its underlying chall…
A Networked Multi-Agent System for Mobile Wireless Infrastructure on Demand
Universitat Pompeu Fabra（庞培法布拉大学）；Tampere University（坦佩雷大学）；Nokia（诺基亚公司）；University of Pennsylvania（宾夕法尼亚大学）；Zoox（佐克斯公司）；University of Pittsburgh（匹兹堡大学）；Universidad de la República（共和国大学）
We consider a wireless device-to-device (D2D) network where the nodes have cached information from a library of possible files. Inspired by the current trend in the standardization of the D2D mode for 4th generation wireless networks, we restrict to one-hop communication: each node place a request to a file in the library, and downloads from some other node which has the requested file in its cache through a direct communication link, without going through a base station. We describe the physical layer communication through a simple "protocol-model", based on interference avoidance (independen…
This paper analyzes the performance of clustered decode-and-forward multi-hop relaying (CDFMR) wireless Rayleigh fading networks, and sheds light on their design principles for energy and spectral efficiency. The focus is on a general performance analysis (over all SNR range) of heterogeneous wireless networks with possibly different numbers of relays in clusters of various separations. For clustered multi-hop relaying systems, ad-hoc routing is known as an efficient decentralized routing algorithm which selects the best relay node on a hop-by-hop basis using local channel state information. I…
In-network data aggregation is an essential technique in mission critical wireless sensor networks (WSNs) for achieving effective transmission and hence better power conservation. Common security protocols for aggregated WSNs are either hop-by-hop or end-to-end, each of which has its own encryption schemes considering different security primitives. End-to-end encrypted data aggregation protocols introduce maximum data secrecy with in-efficient data aggregation and more vulnerability to active attacks, while hop-by-hop data aggregation protocols introduce maximum data integrity with efficient d…
Deep reinforcement learning offers a model-free alternative to supervised deep learning and classical optimization for solving the transmit power control problem in wireless networks. The multi-agent deep reinforcement learning approach considers each transmitter as an individual learning agent that determines its transmit power level by observing the local wireless environment. Following a certain policy, these agents learn to collaboratively maximize a global objective, e.g., a sum-rate utility function. This multi-agent scheme is easily scalable and practically applicable to large-scale cel…
Mobile edge computing (MEC) and wireless power transfer (WPT) are two promising techniques to enhance the computation capability and to prolong the operational time of low-power wireless devices that are ubiquitous in Internet of Things. However, the computation performance and the harvested energy are significantly impacted by the severe propagation loss. In order to address this issue, an unmanned aerial vehicle (UAV)-enabled MEC wireless powered system is studied in this paper. The computation rate maximization problems in a UAV-enabled MEC wireless powered system are investigated under bot…
