Metasurfaces, the two-dimensional counterpart of metamaterials, have caught great attention thanks to their powerful capabilities on manipulation of electromagnetic waves. Recent times have seen the emergence of a variety of metasurfaces exhibiting not only countless functionalities, but also a reconfigurable response. Additionally, digital or coding metasurfaces have revolutionized the field by describing the device as a matrix of discrete building block states, thus drawing clear parallelisms with information theory and opening new ways to model, compose, and (re)program advanced metasurfaces. This paper joins the reconfigurable and digital approaches, and presents a metasurface that leverages the tunability of graphene to perform beam steering at terahertz frequencies. A comprehensive design methodology is presented encompassing technological, unit cell design, digital metamaterial synthesis, and programmability aspects. By setting up and dynamically adjusting a phase gradient along the metasurface plane, the resulting device achieves beam steering at all practical directions. The proposed design is studied through analytical models and validated numerically, showing beam widths and steering errors well below 10 degrees and 5% in most cases. Finally, design guidelines are extracted through a scalability analysis involving the metasurface size and number of unit cell states.
A new configuration for metasurface construction is presented to achieve multi-functional capabilities including perfect absorption, bio/chem sensing, and surface-mode lasing. The reciprocal plasmonic metasurfaces discussed here are composed of two plasmonic surfaces of reciprocal geometries separated by a dielectric spacer. Compared to conventional metasurfaces this simple geometry exhibits an enhanced optical performance. The discussed reciprocal metasurface design further enables effective structural optimization and allows for a simple and scalable fabrication. The physical principle and p…
Dynamically switchable half-/quarter-wave plates have recently been the focus in the terahertz regime. Conventional design philosophy leads to multilayer metamaterials or narrowband metasurfaces. Here we propose a novel design philosophy and a VO2-metal hybrid metasurface for achieving broadband dynamically switchable half-/quarter-wave plate (HWP/QWP) based on the transition from the overdamped to the underdamped resonance. Results show that, by varying the VO2 conductivity by three orders of magnitude, the proposed metasurface's function can be switched between an HWP with polarization conve…
Using metasurfaces to control the wave propagation at will has been very successful over the broad electromagnetic spectrum in recent years. By encoding specially designed abrupt changes of electromagnetic parameters into metasurfaces, such as phase and amplitude, nearly arbitrary control over the output wavefronts could be realized. Constituted by a single- or fewlayer of planar structures, metasurfaces are straightforward in design and fabrication, thus promising many realistic applications. Moreover, such control concept can be further extended to the surface wave regime. In this review, we…
To enhance transmission efficiency of Pancharatnam-Berry (PB) phase metasurfaces, multilayer split-ring resonators were proposed to develop encoding sequences. As per the generalized Snell law, the deflection angle of the PB phase encoding metasurfaces depends on the metasurface period size. Therefore, it is impossible to design an infinitesimal metasurface unit.Consequently, the continuous transmission scattering angle cannot be obtained. In digital signal processing, this study introduces the Fourier convolution principle on encoding metasurface sequences to freely control the transmitted sc…
Fingerprint spectral response of several materials with terahertz electromagnetic radiation indicates that terahertz technology is an effective tool for sensing applications. However, sensing few nanometer thin-film of dielectrics with much longer terahertz waves (1 THz = 0.3 mm) is challenging. Here, we demonstrate a quasi-bound state in the continuum (BIC) resonance for sensing of nanometer scale thin analyte deposited on a flexible metasurface. The large sensitivity originates from strong local field confinement of the quasi-BIC Fano resonance state and extremely low absorption loss of a lo…
Metasurfaces are an enabling technology for complex wave manipulation functions, including in the terahertz frequency range, where they are expected to advance security, imaging, sensing, and communications technology. For operation in transmission, Huygens' metasurfaces are commonly used, since their good impedance match to the surrounding media minimizes reflections and maximizes transmission. Recent theoretical work has shown that Huygens' metasurfaces are non-optimal, particularly for large angles of refraction, and that to eliminate reflections and spurious diffracted beams it is necessar…
We demonstrate the broadband operation of a switchable terahertz quarter-wave plate achieved with an active metasurface employing vanadium dioxide. For this purpose, we utilize anisotropically deformed checkerboard structures, which present broadband characteristics compatible with deep modulation. Moreover, the metasurface is integrated with a current injection circuit to achieve state switching; this injection circuit can also be employed to monitor the electric state of vanadium dioxide. We estimate the Stokes parameters derived from the experimental transmission spectra of the fabricated m…
Laser printing with a spatial light modulator (SLM) has several advantages over conventional raster-writing and dot-matrix display (DMD) writing: multiple pixel exposure, high power endurance and existing software for computer generated holograms (CGH). We present a technique for the design and manufacturing of plasmonic metasurfaces based on ultrafast laser printing with an SLM. As a proof of principle, we have used this technique to laser print a plasmonic metalens as well as high resolution plasmonic color decorations. The high throughput holographic resonant laser printing (HRLP) approach …
Nonlinear metasurfaces offer new paradigm for boosting optical effect beyond limitations of conventional materials. In this work, we present an alternative way to produce pronounced third-harmonic generation (THG) based on nonlinear field resonances rather than linear field enhancement, which is a typical strategy for achieving strong nonlinear response. By designing and studying a nonlinear plasmonic-graphene metasurface at terahertz regime with hybrid guided modes and bound states in the continuum modes, it is found that a THG with a narrow bandwidth can be observed, thanks to the strong res…
Dynamic polarization control of light is essential for numerous applications ranging from enhanced imaging to materials characterization and identification. We present a reconfigurable terahertz metasurface quarter-waveplate consisting of electromechanically actuated micro-cantilever arrays. Our anisotropic metasurface enables tunable polarization conversion cantilever actuation. Specifically, voltage-based actuation provides mode selective control of the resonance frequency, enabling real-time tuning of the polarization state of the transmitted light. The polarization tunable metasurface has …
Acoustic vibrations at the nanoscale (GHz-THz frequencies) and their interactions with electrons, photons and other excitations are the heart of an emerging field in physics: nanophononics. The design of ultrahigh frequency acoustic-phonon transducers, with tunable frequency, and easy to integrate in complex systems is still an open and challenging problem for the development of acoustic nanoscopies and phonon lasers. Here we show how an optimized plasmonic metasurface can act as a high-frequency phonon transducer. We report pump-probe experiments in metasurfaces composed of an array of gold n…
Plasmonic nanostructures with large local field enhancement have been extensively investigated for sensing applications. However, the quality factor and thus the sensing figure of merit are limited due to relatively high ohmic loss. Here we propose a novel plasmonic sensor with ultrahigh figure of merit based on super-narrow Rayleigh anomaly (RA) in a mirror-backed dielectric metasurface. Simulation results show that the RA in such a metasurface can have a super-high quality factor of 16000 in the visible regime, which is an order of magnitude larger than the highest value of reported plasmoni…
We report a THz reflectarray metasurface which uses graphene as active element to achieve beam steering, shaping and broadband phase modulation. This is based on the creation of a voltage controlled reconfigurable phase hologram, which can impart different reflection angles and phases to an incident beam, replacing bulky and fragile rotating mirrors used for terahertz imaging. This can also find applications in other regions of the electromagnetic spectrum, paving the way to versatile optical devices including light radars, adaptive optics, electro-optical modulators and screens.
We present a hybrid device platform for creating an electrically reconfigurable metasurface formed by the integration of plasmonic nanostructures with phase-change material germanium antimony telluride (GST). By changing the phase of GST from amorphous to crystalline through Joule heating, a large range of responses from the metasurface can be achieved. Furthermore, by using the intermediate phases of GST, the metasurface can interact with the incident light in both over-coupling and under-coupling regimes, leading to an inherently broadband response. Through a detailed investigation of the na…
The incorporation of materials with controllable electromagnetic constitutive parameters allows the conceptualization and realization of controllable metasurfaces. With the aim of formulating and investigating a tricontrollable metasurface for efficiently absorbing terahertz radiation, we adopted a pixel-based approach in which the meta-atoms are biperiodic assemblies of discrete pixels. We patched some pixels with indium antimonide (InSb) and some with graphene, leaving the others unpatched. The bottom of each meta-atom was taken to comprise a metal-backed substrate of silicon nitride. The In…
Retroreflectors that can accurately redirect the incident wave in free space back along its original channel provide unprecedented opportunities for light manipulation in wireless communication. However, to the best of our knowledge, the existing methods of designing retroreflectors suffer from either the bulky size, narrow angular bandwidth, or time-consuming post-processing. Here, a scheme of designing ultrathin and all-angle retroreflectors based on hyperbolic plasmonic metasurfaces is proposed and experimentally demonstrated. The physical mechanism underlying this scheme is the high-effici…
Metasurfaces, together with graphene plasmonics, have become prominent for the emissivity control in thermal engineering, both passively through changing the geometric parameters and packing density of the metasurfaces, and actively through graphene gating or doping. We demonstrate a graphene-nanowire coupled plasmonic metasurface utilizing the hybrid localized surface plasmon modes of the nanowire array and graphene. The nanowire array makes the hybrid surface plasmon mode localized, allowing a free-space excitation. The single layer graphene, via the gating between the underneath mirror and …
This paper presents an efficient approach for exciting a dielectric resonator antenna (DRA) in the terahertz frequencies by means of a graphene plasmonic dipole. Design and analysis are performed in two steps. First, the propagation properties of hybrid plasmonic onedimensional and two-dimensional structures are obtained by using transfer matrix theory and the finite-element method. The coupling amount between the plasmonic graphene mode and the dielectric wave mode is explored based on different parameters. These results, together with DRA and plasmonic antenna theory, are then used to design…
The conventional lens's tunability drawback always restricts their application compared to the metasurface lens (metalens). On the other side, reconfigurable metalenses offer the benefits of ultrathin thickness and capable of tunability. Therefore achieving reconfigurable functionalities in a single metasurface has attracted significant research interest for potential terahertz (THz) applications. In this paper, an adjustable metasurface is presented using Vanadium dioxide (VO2) to manipulate the electromagnetic waves and provide the full reflection phase. The phase-change metasurface is compo…
Terahertz (THz) band is considered as the next frontier in wireless communications. The emerging THz multiplexing techniques are expected to dramatically increase the information capacity of THz communications far beyond a single channel limit. In this work, we explore the THz frequency-division multiplexing modality enabled by novel add-drop multiplexer (ADM) design. Based on modular two-wire plasmonic waveguides fabricated using additive manufacturing and metallization techniques, we demonstrate four-port THz ADMs containing grating-loaded side couplers for operation at ~140 GHz carrier freq…
Controlling the phase and amplitude of light emitted by the elements (i.e., pixels) of an optical phased array is of paramount importance to realizing dynamic beam steering for LIDAR applications. In this paper, we propose a plasmonic pixel composed of a metallic nanoantenna covered by a thin oxide layer, and a conductive oxide, e.g., ITO, for use in a reflectarray metasurface. By considering voltage biasing of the nanoantenna via metallic connectors, and exploiting the carrier refraction effect in the metal-oxide-semiconductor capacitor in the accumulation and depletion regions, our simulatio…
We introduce chip-integrated visible light communication-band modulators based on niobium (Nb) metallic plasmonic nano-antenna arrays. Our plasmonic nano-devices provide strong sensitivity to the polarization of the incident visible light and the geometrical parameters of their subwavelength nanoscale building blocks. Moreover, they offer optical modulation properties with modulation depth MD = 60% at resonant wavelength lambda= 716 nm, at room temperature. By engineering the photo response of the Nb nano-device arrays, we observe a maximum extinction A(lambda)= 1- R(lambda}) = 95 % at resonan…
In this work, we theoretically and experimentally study the conversion from a circularly polarized plane electromagnetic wave into a linearly polarized transmitted one using anisotropic self-complementary metasurfaces. For this purpose, a metasurface design operable at sub-terahertz frequencies is proposed and investigated in the range of 230-540 GHz. The metasurface is composed of alternating complementary rectangular patches and apertures patterned in an aluminum layer deposited on a thin polypropylene film. The term \textit{self-complementary} implies that the pattern is invariant with resp…
Plasmonic metasurfaces based on the extraordinary optical transmission effect (EOT) can be designed to efficiently transmit specific spectral bands from the visible to the far-infrared regimes, offering numerous applications in im-portant technological fields such as compact multispectral imaging, biological and chemical sensing, or color displays. However, due to their subwavelength nature, EOT metasurfaces are nowadays fabricated with nano- and micro-lithographic techniques, requiring many processing steps and carried out in expensive cleanroom environments. In this work, we propose and expe…
Metasurfaces offer great potential to control near- and far-fields through engineering of optical properties of elementary cells or meta-atoms. Such perspective opens a route to efficient manipulation of the optical signals both at nanoscale and in photonics applications. In this paper we show that by using an effective surface conductivity tensor it is possible to unambigiously describe optical properties of an anisotropic metasurface in the far- and near-field regimes. We begin with retrieving the effective surface conductivity tensor from the comparative analysis of experimental and numeric…
We report the polarization-dependent electromagnetic response from a series of novel terahertz (THz) metasurfaces where asymmetry is introduced through the displacement of two adjacent metallic arms separated by a distance $δ$. For all polarization states, the symmetric metasurface exhibits a low quality (Q) factor fundamental dipole mode. By breaking the symmetry, we experimentally observe a secondary dipole-like mode with a Q factor nearly $9\times$ higher than the fundamental resonance. As $δ$ increases, the fundamental dipole mode $f_{1}$ redshifts and the secondary mode $f_{2}$ blueshifts…
In this paper, a broadband tunable polarization converter based on graphene metasurfaces is proposed. This polarization converter works in the terahertz (THz) frequency region, using the advantage of graphene characteristics to have a tunable frequency response. The designed graphene-shaped periodic structure on top of the substrate is utilized to convert the incident wave polarization to the desired target in a flexible operational band in the THz frequencies. The polarization conversion ratio is more than 0.85 in a wide range of frequencies in the THz band from 4.86 to 8.42 THz (the fraction…
Spoof surface plasmon meta-couplers are compact antennas which link propagating waves and surface waves. However, most of them are designed with a fixed phase gradient and channel for the incident waves with specific polarization, which limits their further applications in multichannel scenarios. In this Letter, we propose, to the best of our knowledge, a new method that combines the Brillouin folds theory with the Generalized Snell Law. We demonstrate that when the phase gradient of the metasurface is large enough, Brillouin folds effect will occur, which will create dual phase gradient space…
Actively tunable, narrowband spectral filtering across arbitrary optical wavebands is highly desirable in a plethora of applications, from chemical sensing, hyperspectral imaging to infrared astronomy. Yet, the ability to actively reconfigure the optical properties of a solid-state narrowband filter remains elusive. Existing solutions require either moving parts, have slow response times or provide limited spectral coverage. Here, we demonstrate a continuously tunable, spectrally-agnostic, all-solid-state, narrowband phase-change metasurface filter based on a GeSbTe (GST)-embedded plasmonic na…
We demonstrate a classical analogue of electromagnetically induced transparency (EIT) in a highly flexible planar terahertz metamaterial (MM) comprised of three-gap split ring resonators. The keys to achieve EIT in this system are the frequency detuning and hybridization processes between two bright modes coexisting in the same unit cell as opposed to bright-dark modes. We present experimental verification of two-bright mode coupling for a terahertz EIT-MM in the context of numerical results and theoretical analysis based on a coupled Lorentz oscillator model. In addition, a hybrid variation o…
The terahertz detection performance and operating regimes of graphene plasmonic field-effect transistors (FETs) were investigated by a hydrodynamic model. Continuous wave detection simulations showed that the graphene response sensitivity is similar to that of other materials including Si, InGaAs, GaN, and diamond-based FETs. However, the pulse detection results indicated a very short response time, which favors the rapid/high-sensitively detection. The analysis on the mobility dependence of the response time revealed the same detection regimes as the traditional semiconductor materials, i.e. …
Plasmon oscillations have been intensively studied for more than forty years in conventional two-dimensional electron gas systems in order to find new alternatives to the vacuum devices based on the Smith-Purcell effect in the far-infrared region. However, beside the multiple endeavors, up to date, the plasmon generation in semiconductor heterostructures has been very inefficient. Here we demonstrate that the use of high mobility graphene metamaterials, due to their well-known stronger light-plasmon coupling compared to semiconductor materials can significantly improve the efficiency of far-in…
