Lane-free vehicle movement has been recently proposed for connected automated vehicles (CAV) due to various potential advantages. One such advantage stems from the fact that incremental changes of the road width in lane-free traffic lead to corresponding incremental changes of the traffic flow capacity. Based on this property, the concept of internal boundary control was recently introduced to flexibly share the total road width and capacity among the two traffic directions of a highway in real-time, in response to the prevailing traffic conditions, so as to maximize the cross-road (both directions) infrastructure utilization. Feedback-based Linear-Quadratic regulators with or without Integral action (LQI and LQ regulators) are appropriately developed in this paper to efficiently address the internal boundary control problem. Simulation investigations, involving a realistic highway stretch and different demand scenarios, demonstrate that the proposed simple regulators are robust and similarly efficient as an open-loop nonlinear constrained optimal control solution, while circumventing the need for accurate modelling and external demand prediction
Managed lanes, such as a dedicated lane for connected and automated vehicles (CAVs), can provide not only technological accommodation but also desired market incentives for road users to adopt CAVs in the near future. In this paper, we investigate traffic flow characteristics with two configurations of the managed lane across different market penetration rates and quantify the benefits from the perspectives of lane-level headway distribution, fuel consumption, communication density, and overall network performance. The results highlight the benefits of implementing managed lane strategies for …
Originally, the decision and control of the lane change of the vehicle were on the human driver. In previous studies, the decision-making of lane-changing of the human drivers was mainly used to increase the individual's benefit. However, the lane-changing behavior of these human drivers can sometimes have a bad influence on the overall traffic flow. As technology for autonomous vehicles develop, lane changing action as well as lane changing decision making fall within the control category of autonomous vehicles. However, since many of the current lane-changing decision algorithms of autonomou…
In preparing for connected and autonomous vehicles (CAVs), a worrisome aspect is the transition era which will be characterized by mixed traffic (where CAVs and human-driven vehicles (HDVs) share the roadway). Consistent with expectations that CAVs will improve road safety, on-road CAVs may adopt rather conservative control policies, and this will likely cause HDVs to unduly exploit CAV conservativeness by driving in ways that imperil safety. A context of this situation is lane-changing by the CAV. Without cooperation from other vehicles in the traffic stream, it can be extremely unsafe for th…
We present in this paper a method for the estimation of traffic state at road junctions controlled with traffic lights. We assume mixed traffic where a proportion of vehicles are equipped with communication resources. The estimation of road traffic state uses information given by communicating vehicles. The method we propose is built upon a previously published method which was applied to estimate the traffic in the case where roads are composed of two lanes. In this paper, we consider the case where roads are composed of three lanes and we show that this solution can address the general case,…
A recently proposed paradigm for vehicular traffic in the era of CAV (connected and automated vehicles), called TrafficFluid, involves lane-free vehicle movement. Lane-free traffic implies that incremental road widening (narrowing) leads to corresponding incremental increase (decrease) of capacity; and this opens the way for consideration of real-time internal boundary control on highways and arterials, in order to flexibly share the total (both directions) road width and capacity among the two directions in dependence of the bi-directional demand and traffic conditions, so as to maximize the …
We derive time and energy-optimal control policies for a Connected Autonomous Vehicle (CAV) to complete lane change maneuvers in mixed traffic. The interaction between CAVs and Human-Driven Vehicles (HDVs) requires designing the best possible response of a CAV to actions by its neighboring HDVs. This interaction is formulated using a bilevel optimization setting with an appropriate behavioral model for an HDV's. Then, an iterated best response (IBR) method is used to determine a Nash equilibrium. However, we also show that when a common and simple-to-detect condition applies, the optimal lane-…
It is widely acknowledged that verifying the safety of autonomous driving strategies requires a substantial body of simulation testing and road testing. In recent years, the formal safety methods represented by Responsibility-Sensitive Safety (RSS) have encouraged low-cost autonomous driving safety research, benefitting from its accurate assessment of safety and clear division of responsibilities. However, how to maintain traffic efficiency while ensuring safety remains a challenge. To address this problem, this paper proposes a formulized negotiation-based lane-changing strategy that makes a …
This paper aims to investigate the characteristics of durations of discretionary lane changes (LCs) on freeways based on an enriched dataset. A comprehensive analysis of LC durations was conducted based on vehicle types, LC directions and navigation speeds. It was found that the heavy vehicle takes longer time to complete LC maneuver. The LC direction significantly influences the durations of passenger cars but has no significant influence on heavy vehicles. The navigation speed was found to have important influence on LC durations. However, it has different impacts according to vehicle types …
Reinforcement learning techniques can provide substantial insights into the desired behaviors of future autonomous driving systems. By optimizing for societal metrics of traffic such as increased throughput and reduced energy consumption, such methods can derive maneuvers that, if adopted by even a small portion of vehicles, may significantly improve the state of traffic for all vehicles involved. These methods, however, are hindered in practice by the difficulty of designing efficient and accurate models of traffic, as well as the challenges associated with optimizing for the behaviors of doz…
Unsignalized intersection cooperation of connected and automated vehicles (CAVs) is able to eliminate green time loss of signalized intersections and improve traffic efficiency. Most of the existing research on unsignalized intersection cooperation considers fixed lane direction, where only specific turning behavior of vehicles is allowed on each lane. Given that traffic volume and the proportion of vehicles with different turning expectation may change with time, fixed lane direction may lead to inefficiency at intersections. This paper proposes a multi-lane unsignalized intersection cooperat…
This paper presents an on-board advance warning system for vehicles based on a probabilistic prediction model that advises them on when to change lanes to reach a highway diverge on time. The system is based on a model that estimates the probability of reaching a goal state on the road using one or multiple lane changes. This estimate is based on several traffic-related parameters such as the distribution of inter-vehicle headway distances as well as driver-related parameters like lane change duration. For an upcoming diverge, the advance warning system uses the model to continuously calculate…
Connected and automated vehicles (CAVs) and human-driven vehicles (HVs) are expected to coexist in the near future. CAV-dedicated lanes and phases have been explored to handle the uncertainty in the driving behavior of HVs in the mixed traffic environment. However, CAV-dedicated phases could significantly sacrifice HV benefits. This study proposes a shared-phase-dedicated-lane (SPDL)-based traffic control model at isolated intersections under the mixed traffic environment. Left-turn and through CAVs share CAV-dedicated lanes and cross the intersection during the shared phases with HVs. A three…
Multi-vehicle coordinated decision making and control can improve traffic efficiency while guaranteeing driving safety. Formation control is a typical multi-vehicle coordination method in the multi-lane scenario. Among the existing formation control methods, the formation switching process is predefined and the collision-free behavior of vehicles has not been considered and explained in detail. This paper proposes a formation control method for multiple Connected and Automated Vehicles (CAVs) on multi-lane roads. Firstly, a bi-level planning framework is proposed to switch the structure of the…
Lane-change maneuver has always been a challenging task for both manual and autonomous driving, especially in an urban setting. In particular, the uncertainty in predicting the behavior of other vehicles on the road leads to indecisive actions while changing lanes, which, might result in traffic congestion and cause safety concerns. This paper analyzes the factors related to uncertainty such as speed range change and lane change so as to design a predictive Markov decision process for lane-change maneuver in the urban setting. A hidden Markov model is developed for modeling uncertainties of su…
The paper presents a movement strategy for Connected and Automated Vehicles (CAVs) in a lane-free traffic environment with vehicle nudging by use of an optimal control approach. State-dependent constraints on control inputs are considered to ensure that the vehicle moves within the road boundaries and to prevent collisions. An objective function, comprising various weighted sub-objectives, is designed, whose minimization leads to vehicle advancement at the desired speed, when possible, while avoiding obstacles. A nonlinear optimal control problem (OCP) is formulated for the minimization of the…
This paper implements a traffic signal control system by using real-time traffic flow feedback. This system is designed to deal with two-lane intersections. We construct an experiment field similar to the roads and drivers in Taiwan using an autonomous simulation software called Virtual Test Drive (VTD) released by MSC Software. We erect four cameras on the side of the roads to get the image of the intersection, then transfer the image information into traffic flow information. Analyze the traffic information in each lane by using Greenshields traffic flow model. Control the traffic signals by…
Kinetics of dilute heterogeneous traffic on a two lane road is formulated in the framework of the Ben-Naim Krapivsky model and stationary state properties are analytically derived in the asymptotic limit. The heterogeneity is introduced as a quenched disorder in desired speeds of vehicles. The model assumes that each vehicle/platoon in a lane moves ballistically until it approaches a slow moving vehicle/platoon and then joins it. Vehicles in a platoon are assumed to escape the platoon at a constant rate by changing lanes. Each lane is assumed to have a different escape rate. As the stationary …
In this paper, a multi-lane multi-population microscopic model, which presents stop and go waves, is proposed to simulate traffic on a ring-road. Vehicles are divided between human-driven and autonomous vehicles (AV). Control strategies are designed with the ultimate goal of using a small number of AVs (less than 5\% penetration rate) to represent Lagrangian control actuators that can smooth the multilane traffic flow and dissipate the stop-and-go waves. This in turn may reduce fuel consumption and emissions. The lane-changing mechanism is based on three components that we treat as parameters …
We derive optimal control policies for a Connected Automated Vehicle (CAV) and cooperating neighboring CAVs to carry out a lane change maneuver consisting of a longitudinal phase where the CAV properly positions itself relative to the cooperating neighbors and a lateral phase where it safely changes lanes. In contrast to prior work on this problem, where the CAV "selfishly" seeks to minimize its maneuver time, we seek to ensure that the fast-lane traffic flow is minimally disrupted (through a properly defined metric) and that highway throughput is improved by optimally selecting the cooperatin…
Boston University（波士顿大学）；Honda Research Institute-US (HRI-US)（美国本田研究院（HRI-US））
We derive optimal control policies for a Connected Automated Vehicle (CAV) and cooperating neighboring CAVs to carry out a lane change maneuver consisting of a longitudinal phase where the CAV properly positions itself relative to the cooperating neighbors and a lateral phase where it safely changes lanes. In contrast to prior work on this problem, where the CAV "selfishly" only seeks to minimize its maneuver time, we seek to ensure that the fast-lane traffic flow is minimally disrupted (through a properly defined metric). Additionally, when performing lane-changing maneuvers, we optimally sel…
In Part I of this paper series, several macroscopic traffic model elements for mathematically describing freeway networks equipped with managed lane facilities were proposed. These modeling techniques seek to capture at the macroscopic the complex phenomena that occur on managed lane-freeway networks, where two parallel traffic flows interact with each other both in the physical sense (how and where cars flow between the two lane groups) and the physiological sense (how driving behaviors are changed by being adjacent to a quantitatively and qualitatively different traffic flow). The local desc…
Multi-lane roads are typical scenarios in the real-world traffic system. Vehicles usually have preference on lanes according to their routes and destinations. Few of the existing studies looks into the problem of controlling vehicles to drive on their desired lanes. This paper proposes a formation control method that considers vehicles' preference on different lanes. The bi-level formation control framework is utilized to plan collision-free motion for vehicles, where relative target assignment and path planning are performed in the upper level, and trajectory planning and tracking are perform…
Key Laboratory of Road and Traffic Engineering of Ministry of Education, Tongji University（同济大学道路与交通工程教育部重点实验室）；China Railway Siyuan Survey and Design Group Co., Ltd.（中铁第四勘察设计院集团有限公司）；Institute of Logistics Science and Engineering, Shanghai Maritime University（上海海事大学物流科学与工程研究院）
The freeway on-ramp merging section is often identified as a crash-prone spot due to the high frequency of traffic conflicts. Very few traffic conflict analysis studies comprehensively consider different vehicle types at freeway merging section. Thus, the main objective of this study is to analyse conflicts between different vehicle types at freeway merging section. Field data are collected by Unmanned Aerial Vehicle (UAV) at merging areas in Shanghai, China. Vehicle extraction method is utilized to obtain vehicle trajectories. Time-to-collision (TTC) is utilized as the surrogate safety measur…
In this paper, we study how to learn an appropriate lane changing strategy for autonomous vehicles by using deep reinforcement learning. We show that the reward of the system should consider the overall traffic efficiency instead of the travel efficiency of an individual vehicle. In summary, cooperation leads to a more harmonic and efficient traffic system rather than competition
Traditional traffic optimization solutions assume that the graph structure of road networks is static, missing opportunities for further traffic flow optimization. We are interested in optimizing traffic flows as a new type of graph-based problem, where the graph structure of a road network can adapt to traffic conditions in real time. In particular, we focus on the dynamic configuration of traffic-lane directions, which can help balance the usage of traffic lanes in opposite directions. The rise of connected autonomous vehicles offers an opportunity to apply this type of dynamic traffic optim…
Merging in the form of a mandatory lane-change is an important issue in transportation research. Even when safely completed, merging may disturb the mainline traffic and reduce the efficiency or capacity of the roadway. In this paper, we consider a Stackelberg game-theoretic driver behavior model where the so-called utilities or payoffs reflect the merging vehicle's aggressiveness as it pertains the decision to merge as the situation stands or to accelerate, decelerate prior to the actual lane-change maneuver. The interaction of the merging vehicle with the mainline traffic is also considered …
Autonomous driving at intersections is one of the most complicated and accident-prone traffic scenarios, especially with mixed traffic participants such as vehicles, bicycles and pedestrians. The driving policy should make safe decisions to handle the dynamic traffic conditions and meet the requirements of on-board computation. However, most of the current researches focuses on simplified intersections considering only the surrounding vehicles and idealized traffic lights. This paper improves the integrated decision and control framework and develops a learning-based algorithm to deal with com…
