In this paper, a numerical analysis of boundary layer flow and heat transfer in Jeffrey fluid over a moving flat plate with Newtonian Heating have been presented. The governing partial differential equations were reduced to a transformed ordinary differential equation with the help of similarity transformation. Numerical solutions were obtained for these transformed ordinary differential equation by using the Runge-Kutta-Fehlberg method. The effect on the boundary layer flow and heat transfer behaviours of various parameters such as Deborah number λ2, relaxation time and retardation time ratio λ, Newtonian heating parameter γ, Prandtl number Pr and moving plate velocity parameter ε has been investigated. It is important to mention that the results obtained and reported here are impactful to the researchers working in this field and can be used in the future as a guideline and analysis context.
Keywords: Jeffrey Fluid, Newtonian Heating, Boundary Layer Flow, Moving plate
The present paper deals with a two-fluid model for the flow of Jeffrey fluid in tubes of small diameters. It is assumed that the core region consists of Jeffrey fluid and Newtonian fluid in the peripheral region. Analytical expressions for velocity, effective viscosity, core hematocrit and mean hematocrit have been derived. The effects of various parameters, namely, Jeffrey parameter (λ1), tube hematocrit (H0) and tube radius (a) on effective viscosity, core hematocrit and mean hematocrit have been studied. It is found that the effective viscosity decreases as the Jeffrey parameter increases b…
The motion of incompressible fractional Oldroyd-B fluids between two parallel walls perpendicular to a plate that applies time-dependent shear stresses to the fluid is studied by means of integral transforms. In the special cases of Newtonian and second grade fluids, these shear stresses reduces to fH(t)sin(wt) or fH(t)cos(wt). General solutions for velocity are presented as a sum of Newtonian solutions and the corresponding non-Newtonian contributions. They reduce to the similar solutions corresponding to the motion over an infinite plate if the distance between walls tend to infinity and can…
Starch solutions, which are strongly non-Newtonian, show a surface instability, when subjected to a load. A droplet of the fluid is sandwiched between two glass plates and a weight varying from 1 to 5 kgs. is placed on the top plate. The area of contact between the fluid and plate increases in an oscillatory manner, unlike Newtonian fluids in a similar situation. The periphery moreover, develops a viscous fingering like instability, which is not expected under compression. We attempt to model the non-Newtonian nature of the fluid through a visco-elastic model incorporating generalized calculus…
We study fluid-structure interactions (FSIs) in a long and shallow microchannel, conveying a non-Newtonian fluid, at steady state. The microchannel has a linearly elastic and compliant top wall, while its three other walls are rigid. The fluid flowing inside the microchannel has a shear-dependent viscosity described by the power-law rheological model. We employ lubrication theory to solve for the flow problem inside the long and shallow microchannel. For the structural problem, we employ two plate theories, namely Kirchhoff-Love theory of thin plates and Reissner-Mindlin first-order shear defo…
The well-known problem of unidirectional plane flow of a fluid in a half-space due to the impulsive motion of the plate it rests upon is discussed in the context of the second-grade and the Oldroyd-B non-Newtonian fluids. The governing equations are derived from the conservation laws of mass and momentum and three correct known representations of their exact solutions given. Common mistakes made in the literature are identified. Simple numerical schemes that corroborate the analytical solutions are constructed.
In the above paper the author treats the boundary layer flow of an electrically conducting, non-Newtonian fluid along a vertical plate embedded in a Darcy-Brinkman-Forchheimer porous medium. The fluid is under the action of a constant transverse magnetic field and the radiation is taken into account in the energy equation. The boundary layer equations are transformed into ordinary ones and subsequently are solved numerically. However, there is a fundamental error in this paper which is presented below:
The steady state of a dilute gas enclosed between two infinite parallel plates in relative motion and under the action of a uniform body force parallel to the plates is considered. The Bhatnagar-Gross-Krook model kinetic equation is analytically solved for this Couette-Poiseuille flow to first order in the force and for arbitrary values of the Knudsen number associated with the shear rate. This allows us to investigate the influence of the external force on the non-Newtonian properties of the Couette flow. Moreover, the Couette-Poiseuille flow is analyzed when the shear-rate Knudsen number and…
The study investigates the problem of magnetohydrodynamic (MHD) free convection over a non-isothermal axisymmetric body under the action of transverse magnetic field. The body is embedded in a porous medium saturated with electrically conducting non-Newtonian power law fluid. In order to obtain similarity solution, it is assumed that the viscosity of the fluid decays exponentially with temperature. The qualitative results are illustrated for a vertical flat plate, horizontal cylinder and sphere.
The problem of buckling and coiling of jets of viscous, Newtonian liquids has received a substantial level of attention over the past two decades, both from experimental and theoretical points of view. Nevertheless, many industrial fluids and consumer products are non-Newtonian, and their rheological properties affect their flow behavior. The present work aims at studying the dynamics of cylindrical jets of a viscoelastic, shear-thinning solution of cetylpyridinium salt (CPyCl). In concentrated solutions, CPyCl surfactant molecules have been shown to assemble in long wormlike micellar structur…
We investigate freely expanding liquid sheets made of either simple Newtonian fluids or solutions of high molecular water-soluble polymer chains. A sheet is produced by the impact of a drop on a quartz plate covered with a thin layer of liquid nitrogen that suppresses shear viscous dissipation thanks to an inverse Leidenfrost effect. The sheet expands radially until reaching a maximum diameter and subsequently recedes. Experiments indicate the presence of two expansion regimes: the capillary regime, where the maximum expansion is controlled by surface tension forces and does not depend on the …
Particles in inertialess flows of shear thinning fluids are a model representation for several systems in biology, ecology, and micro-fluidics.In this paper, we analyze the motion of a spheroid in a pressure driven flow of a shear thinning fluid.The shear thinning rheology is characterized by the Carreau model.We use a combination of perturbative techniques and the reciprocal theorem to delineate the kinematics of prolate and oblate spheroids.There are two perturbative strategies adopted, one near the zero shear Newtonian plateau and the other near the infinite shear Newtonian plateau.In both …
It is well known that a boundary layer develops along an infinite plate under oscillatory motion in a Newtonian fluid. In this work, this oscillatory boundary layer theory is generalized to the case of linear viscoelastic(LVE) flow. We demonstrate that the dynamics in LVE are generically different than those for flow of similar settings in Newtonian fluids, in several aspects. These new discoveries are expected to have consequences on related engineering applications. Mimicking the theory for Stokes oscillatory layers along an infinite plate in Newtonian flow, we derive a similar oscillatory b…
This study aims to investigate the behavior of multicomponent fluid flows consisting of Newtonian and non-Newtonian components, especially terminal velocity of a rising bubble in a power-law fluid. A recent lattice Boltzmann (LB) model is extended using power-law scheme to be able to simulate both Newtonian and non-Newtonian fluid flows at high density and viscosity ratios. Also, a variable mobility is introduced in this study to minimize the unphysical error around small bubbles in the domain. A three-component fluid flow system is examined using a constant and variable mobility. It is shown …
We study hydrodynamics, heat transfer and entropy generation in pressure-driven microchannel flow of a power-law fluid. Specifically, we address the effect of asymmetry in the slip boundary condition at the channel walls. Constant, uniform but unequal heat fluxes are imposed at the walls in this thermally developed flow. The effect of asymmetric slip on the velocity profile, on the wall shear stress, on the temperature distribution, on the Bejan number profiles, and on the average entropy generation and the Nusselt number are established through the numerical evaluation of exact analytical exp…
A thermal colloid suspended in a liquid will transition from a short time ballistic motion to a long time diffusive motion. However, the transition between ballistic and diffusive motion is highly dependent on the properties and structure of the particular liquid. We directly observe a free floating tracer particle's ballistic motion and its transition to the long time regime in both a Newtonian fluid and a viscoelastic Maxwell fluid. We examine the motion of the free particle in a Newtonian fluid and demonstrate a high degree of agreement with the accepted Clercx-Schram model for motion in a …
The steady, asymmetric and two-dimensional flow of viscous, incompressible, and Newtonian fluid through a rectangular channel with splitter plate parallel to walls is investigated numerically. In the past, the position of the splitter plate was taken as a centerline of channel but here we consider its different positions which cause the asymmetric behaviour of the flow field. The geometric parameter that controls the position of splitter is defined as splitter position parameter α. The plane Poiseuille flow is considered far from upstream and downstream of the splitter. The fourth order method…
The steady, asymmetric and two-dimensional flow of viscous, incompressible micropolar fluid through a rectangular channel with a splitter (parallel to walls) was formulated and simulated numerically. The plane Poiseuille flow was considered far from upstream and downstream of the splitter. The geometric parameter that controls the position of splitter was defined as splitter position parameter. A numerical scheme that comprises a fourth order method followed by special finite-difference method was used to solve the boundary value problem. This numerical scheme transforms the governing equation…
The main objective of this paper is to study the effect of a cold, vertical, arc-shaped control plate on the flow characteristics and forced convective heat transfer mechanism across a rotary oscillating, isothermally heated circular cylinder. Two-dimensional, unsteady, incompressible, laminar, and viscous flow of a Newtonian, constant property fluid is considered across the cylinder. The simulations are performed with an in-house code for various gap ratios between the control plate and the cylinder ($0\leq d/R_0 \leq 3$), maximum angular velocity ($0.5\leq α_m \leq 4$) and frequency ratio of…
A semi-analytical solution for the lubrication force between two spheres approaching in viscoelastic fluids described by the Oldroyd-B model under small Deborah numbers
Periodically-driven flows are known to generate non-zero, time-averaged fluxes of heat or solute species, due to the interactions of out-of-phase velocity and temperature/concentration fields, respectively. Herein, we investigate such transport (a form of the well-known Taylor--Aris dispersion) in the gap between two parallel plates, one of which oscillates vertically, generating a time-periodic squeeze flow of either a newtonian or Maxwellian fluid. Using the method of multiple time-scale homogenization, the mass/heat balance equation describing transport in this flow is reduced to a one-dime…
Most mathematics and engineering textbooks describe the process of "subtracting off" the steady state of a linear parabolic partial differential equation as a technique for obtaining a boundary-value problem with homogeneous boundary conditions that can be solved by separation of variables (i.e., eigenfunction expansions). While this method produces the correct solution for the start-up of the flow of, e.g., a Newtonian fluid between parallel plates, it can lead to erroneous solutions to the corresponding problem for a class of non-Newtonian fluids. We show that the reason for this is the non-…
It is argued that there are three distinct zones in a wall bounded turbulent flow field dominated by three completely different mechanisms: - An outer region where the velocity profile is determined by the pressure distribution - A highly active wall layer dominated by a sequence of inrush-sweep and ejections, and - An intermediate region well described by the traditional logarithmic law proposed by independently Millikan and Prandtl. The log-law and the wall layer are sometimes referred to as the inner region. Under these conditions, a unique set of normalisation parameters cannot possibly ap…
Exact solutions are obtained for the steady flow of a power-law fluid between parallel plates with partial slip conditions and uniform cross flow. The problem is properly formulated and similarities are exploited. The exact solutions are obtained in terms of integrals which can be performed, in closed form, in special cases of the power-law index n. Solutions to cases of n=1/2, 1, and 2; representing a pseudo-plastic, a Newtonian, and a dilatant fluid, respectively, are presented. Tendencies to corresponding degenerate cases in the literature are demonstrated. Depending on the strength of the …
Analytical solutions in fluid dynamics can be used to elucidate the physics of complex flows and to serve as test cases for numerical models. In this work, we present the analytical solution for the acoustic boundary layer that develops around a rigid sphere executing small amplitude harmonic rectilinear motion in a compressible fluid. The mathematical framework that describes the primary flow is identical to that of wave propagation in linearly elastic solids, the difference being the appearance of complex instead of real valued wave numbers. The solution reverts to well-known classical solut…
The effect of radiative heat transfer on the entropy generation in a two-phase non-isothermal fluid flow between two infinite horizontal parallel plates under the influence of a constant pressure gradient and transverse non-invasive magnetic field have been explored. Both the fluids are considered to be viscous, incompressible, immiscible, Newtonian, and electrically conducting. The governing equations in Cartesian coordinate are solved analytically with the help of appropriate boundary conditions to obtain the velocity and temperature profile inside the channel. Application of transverse magn…
