In this paper, we study a class of spatially coupled turbo codes, namely partially information- and partially parity-coupled turbo codes. This class of codes enjoy several advantages such as flexible code rate adjustment by varying the coupling ratio and the encoding and decoding architectures of the underlying component codes can remain unchanged. For this work, we first provide the construction methods for partially coupled turbo codes with coupling memory $m$ and study the corresponding graph models. We then derive the density evolution equations for the corresponding ensembles on the binary erasure channel to precisely compute their iterative decoding thresholds. Rate-compatible designs and their decoding thresholds are also provided, where the coupling and puncturing ratios are jointly optimized to achieve the largest decoding threshold for a given target code rate. Our results show that for a wide range of code rates, the proposed codes attain close-to-capacity performance and the decoding performance improves with increasing the coupling memory. In particular, the proposed partially parity-coupled turbo codes have thresholds within 0.0002 of the BEC capacity for rates ranging from $1/3$ to $9/10$, yielding an attractive way for constructing rate-compatible capacity-approaching channel codes.
Partially information coupled turbo codes (PIC-TCs) is a class of spatially coupled turbo codes that can approach the BEC capacity while keeping the encoding and decoding architectures of the underlying component codes unchanged. However, PIC-TCs have significant rate loss compared to its component rate-1/3 turbo code, and the rate loss increases with the coupling ratio. To absorb the rate loss, in this paper, we propose the partially information coupled duo-binary turbo codes (PIC-dTCs). Given a rate-1/3 turbo code as the benchmark, we construct a duo-binary turbo code by introducing one extr…
In this paper, we investigate the performance of a class of spatially coupled codes, namely partially information coupled turbo codes (PIC-TCs) over the binary erasure channel (BEC). This class of codes enjoy flexible code rate adjustment by varying the coupling ratio. Moreover, the coupling method can be directly applied to any component codes without changing the encoding and decoding architectures of the underlying component codes. However, the theoretical performance of PIC-TCs has not been fully investigated. For this work, we consider the codes that have coupling memory $m$ and study the…
We consider the problem of compressing memoryless binary data with or without side information at the decoder. We review the parity- and the syndrome-based approaches and discuss their theoretical limits, assuming that there exists a virtual binary symmetric channel between the source and the side information, and that the source is not necessarily uniformly distributed. We take a factor-graph-based approach in order to devise how to take full advantage of the ready-available iterative decoding procedures when turbo codes are employed, in both a parity- or a syndrome-based fashion. We end up o…
This paper presents TurboNet, a novel model-driven deep learning (DL) architecture for turbo decoding that combines DL with the traditional max-log-maximum a posteriori (MAP) algorithm. To design TurboNet, we unfold the original iterative structure for turbo decoding and replace each iteration by a deep neural network (DNN) decoding unit. In particular, the DNN decoding unit is obtained by parameterizing the max-log-MAP algorithm rather than replace the whole decoder with a black box fully connected DNN architecture. With the proposed architecture, the parameters can be efficiently learned fro…
Two classes of turbo codes over high-order finite fields are introduced. The codes are derived from a particular protograph sub-ensemble of the (dv=2,dc=3) low-density parity-check code ensemble. A first construction is derived as a parallel concatenation of two non-binary, time-variant accumulators. The second construction is based on the serial concatenation of a non-binary, time-variant differentiator and of a non-binary, time-variant accumulator, and provides a highly-structured flexible encoding scheme for (dv=2,dc=4) ensemble codes. A cycle graph representation is provided. The proposed …
The rapidly improving performance of modern hardware renders convolutional codes obsolete, and allows for the practical implementation of more sophisticated correction codes such as low density parity check (LDPC) and turbo codes (TC). Both are decoded by iterative algorithms, which require a disproportional computational effort for low channel noise. They are also unable to correct higher noise levels, still below the Shannon theoretical limit. In this paper, we discuss an enhanced version of a convolutional-like decoding paradigm which adopts very large spaces of possible system states, of t…
The effects of the odd-even constraint - as an interleaver design criterion - on the performance of rate-1/2 binary turbo codes are revisited. According to the current understanding, its adoption is favored because it makes the information bits be uniformly protected, each one by its own parity bit. In this paper, we provide instances that contradict this point of view suggesting for a different explanation of the constraint's behavior, in terms of distance spectrum.
The performance of a Turbo code with short block length depends critically on the interleaver design. There are two major criteria in the design of an interleaver: the distance spectrum of the code and the correlation between the information input data and the soft output of each decoder corresponding to its parity bits. This paper describes a new interleaver design for Turbo codes with short block length based on these two criteria. A deterministic interleaver suitable for Turbo codes is also described. Simulation results compare the new interleaver design to different existing interleavers.
It has been observed that particular rate-1/2 partially systematic parallel concatenated convolutional codes (PCCCs) can achieve a lower error floor than that of their rate-1/3 parent codes. Nevertheless, good puncturing patterns can only be identified by means of an exhaustive search, whilst convergence towards low bit error probabilities can be problematic when the systematic output of a rate-1/2 partially systematic PCCC is heavily punctured. In this paper, we present and study a family of rate-1/2 partially systematic PCCCs, which we call pseudo-randomly punctured codes. We evaluate their …
This paper is devoted to the finite-length analysis of turbo decoding over the binary erasure channel (BEC). The performance of iterative belief-propagation (BP) decoding of low-density parity-check (LDPC) codes over the BEC can be characterized in terms of stopping sets. We describe turbo decoding on the BEC which is simpler than turbo decoding on other channels. We then adapt the concept of stopping sets to turbo decoding and state an exact condition for decoding failure. Apply turbo decoding until the transmitted codeword has been recovered, or the decoder fails to progress further. Then th…
In this paper, we introduce the concept of spatially coupled turbo codes (SC-TCs), as the turbo codes counterpart of spatially coupled low-density parity-check codes. We describe spatial coupling for both Berrou et al. and Benedetto et al. parallel and serially concatenated codes. For the binary erasure channel, we derive the exact density evolution (DE) equations of SC-TCs by using the method proposed by Kurkoski et al. to compute the decoding erasure probability of convolutional encoders. Using DE, we then analyze the asymptotic behavior of SC-TCs. We observe that the belief propagation (BP)…
This work proposes a tractable estimation of the maximum a posteriori (MAP) threshold of various families of sparse-graph code ensembles, by using an approximation for the extended belief propagation generalized extrinsic information transfer (EBP-GEXIT) function, first proposed by Measson et al. We consider the transmission over non-binary complex-input additive white Gaussian noise channel and extend the existing results to obtain an expression for the GEXIT function. We estimate the MAP threshold by applying the Maxwell construction to the obtained approximate EBP-GEXIT charts for various f…
We solve the problem of designing powerful low-density parity-check (LDPC) codes with iterative decoding for the block-fading channel. We first study the case of maximum-likelihood decoding, and show that the design criterion is rather straightforward. Unfortunately, optimal constructions for maximum-likelihood decoding do not perform well under iterative decoding. To overcome this limitation, we then introduce a new family of full-diversity LDPC codes that exhibit near-outage-limit performance under iterative decoding for all block-lengths. This family competes with multiplexed parallel turbo…
For high throughput applications, turbo-like iterative decoders are implemented with parallel architectures. However, to be efficient parallel architectures require to avoid collision accesses i.e. concurrent read/write accesses should not target the same memory block. This consideration applies to the two main classes of turbo-like codes which are Low Density Parity Check (LDPC) and Turbo-Codes. In this paper we propose a methodology which finds a collision-free mapping of the variables in the memory banks and which optimizes the resulting interleaving architecture. Finally, we show through a…
In this paper we concentrate on rate-1/3 systematic parallel concatenated convolutional codes and their rate-1/2 punctured child codes. Assuming maximum-likelihood decoding over an additive white Gaussian channel, we demonstrate that a rate-1/2 non-systematic child code can exhibit a lower error floor than that of its rate-1/3 parent code, if a particular condition is met. However, assuming iterative decoding, convergence of the non-systematic code towards low bit-error rates is problematic. To alleviate this problem, we propose rate-1/2 partially-systematic codes that can still achieve a lowe…
This paper provides simple lower bounds on the number of iterations which is required for successful message-passing decoding of some important families of graph-based code ensembles (including low-density parity-check codes and variations of repeat-accumulate codes). The transmission of the code ensembles is assumed to take place over a binary erasure channel, and the bounds refer to the asymptotic case where we let the block length tend to infinity. The simplicity of the bounds derived in this paper stems from the fact that they are easily evaluated and are expressed in terms of some basic p…
Quantum stabilizer codes (QSCs) suffer from a low quantum coding rate, since they have to recover the quantum bits (qubits) in the face of both bit-flip and phase-flip errors. In this treatise, we conceive a low-complexity concatenated quantum turbo code (QTC) design exhibiting a high quantum coding rate. The high quantum coding rate is achieved by combining the quantum-domain version of short-block codes (SBCs) also known as single parity check (SPC) codes as the outer codes and quantum unity-rate codes (QURCs) as the inner codes. Despite its design simplicity, the proposed QTC yields a near-…
Polar codes has been selected as the channel coding scheme for 5G new radio (NR) control channel. Specifically, a special type of parity-check polar (PC-Polar) codes was adopted in uplink control information (UCI). In this paper, we propose a parity-check soft-cancellation (PC-SCAN) algorithm and its simplified version to decode PC-Polar codes. The potential benefits are two-fold. First, PC-SCAN can provide soft output for PC-Polar codes, which is essential for advanced turbo receivers. Second, the decoding performance is better than that of successive cancellation (SC). This is due to the fac…
A generalized low-density parity-check (GLDPC) code is a class of codes, where single parity check nodes in a conventional low-density parity-check (LDPC) code are replaced by linear codes with higher parity check constraints. In this paper, we introduce a new method of constructing GLDPC codes by inserting the generalized check nodes for partial doping. While the conventional protograph GLDPC code dopes the protograph check nodes by replacing them with the generalized check nodes, a new GLDPC code is constructed by adding the generalized check nodes and partially doping the selected variable …
An algorithm of improving the performance of iterative decoding on perpendicular magnetic recording is presented. This algorithm follows on the authors' previous works on the parallel and serial concatenated turbo codes and low-density parity-check codes. The application of this algorithm with signal-to-noise ratio mismatch technique shows promising results in the presence of media noise. We also show that, compare to the standard iterative decoding algorithm, an improvement of within one order of magnitude can be achieved.
This paper investigates the Triangle Single Parity Check (T/SPC) code, a novel class of high-rate low-complexity LDPC codes. T/SPC is a regular, soft decodable, linear-time encodable/decodable code. Compared to previous high-rate and low-complexity LDPC codes, such as the well-known Turbo Product Code / Single Parity Check (TPC/SPC), T/SPC provides higher code rates, shorter code words, and lower complexity. This makes T/SPC very attractive for practical implementation on integrated circuits. In addition, we analyze the performance of iterative decoders based on a soft-input soft-output (SISO)…
Since the discovery of turbo codes 20 years ago and the subsequent re-discovery of low-density parity-check codes a few years later, the field of channel coding has experienced a number of major advances. Up until that time, code designers were usually happy with performance that came within a few decibels of the Shannon Limit, primarily due to implementation complexity constraints, whereas the new coding techniques now allow performance within a small fraction of a decibel of capacity with modest encoding and decoding complexity. Due to these significant improvements, coding standards in appl…
A new protograph-based framework for message passing (MP) decoding of low density parity-check (LDPC) codes with Hamming weight amplifiers (HWAs), which are used e.g. in the NIST post-quantum crypto candidate LEDAcrypt, is proposed. The scheme exploits the correlations in the error patterns introduced by the HWA using a turbo-like decoding approach where messages between the decoders for the outer code given by the HWA and the inner LDPC code are exchanged. Decoding thresholds for the proposed scheme are computed using density evolution (DE) analysis for belief propagation (BP) and ternary mes…
In this paper, we introduce an efficient iterative solver for the joint linear-programming (LP) decoding of low-density parity-check (LDPC) codes and finite-state channels (FSCs). In particular, we extend the approach of iterative approximate LP decoding, proposed by Vontobel and Koetter and explored by Burshtein, to this problem. By taking advantage of the dual-domain structure of the joint decoding LP, we obtain a convergent iterative algorithm for joint LP decoding whose structure is similar to BCJR-based turbo equalization (TE). The result is a joint iterative decoder whose complexity is s…
This paper studies the transmission of Gaussian sources through additive white Gaussian noise (AWGN) channels in bandwidth expansion regime, i.e., the channel bandwidth is greater than the source bandwidth. To mitigate the error propagation phenomenon of conventional digital transmission schemes, we propose in this paper a new capacity-approaching joint source channel coding (JSCC) scheme based on partially block Markov superposition transmission (BMST) of nested lattice codes. In the proposed scheme, first, the Gaussian source sequence is discretized by a lattice-based quantizer, resulting in…
Sparse code multiple access (SCMA) is an emerging paradigm for efficient enabling of massive connectivity in future machine-type communications (MTC). In this letter, we conceive the uplink transmissions of the low-density parity check (LDPC) coded SCMA system. Traditional receiver design of LDPC-SCMA system, which is based on message passing algorithm (MPA) for multiuser detection followed by individual LDPC decoding, may suffer from the drawback of the high complexity and large decoding latency, especially when the system has large codebook size and/or high overloading factor. To address thi…
Upcoming modern communications are based on 5G specifications and aim at providing solutions for novel vertical industries. One of the major changes of the physical layer is the use of Low-Density Parity-Check (LDPC) code for channel coding. Although LDPC codes introduce additional computational complexity compared with the previous generation, where Turbocodes where used, LDPC codes provide a reasonable trade-off in terms of complexity-Bit Error Rate (BER). In parallel to this, Deep Learning algorithms are experiencing a new revolution, specially to image and video processing. In this context…
We address the problem of the joint sequence detection in partial-response (PR) channels and decoding of low-density parity-check (LDPC) codes. We model the PR channel and the LDPC code as a combined inference problem. We present for the first time the derivation of the belief propagation (BP) equations that allow the simultaneous detection and decoding of a LDPC codeword in a PR channel. To accomplish this we follow an approach from statistical mechanics, in which the Bethe free energy is minimized with respect to the beliefs on the nodes of the PR-LDPC graph. The equations obtained are expli…
Linear nested codes, where two or more sub-codes are nested in a global code, have been proposed as candidates for reliable multi-terminal communication. In this paper, we consider nested array-based spatially coupled low-density parity-check (SC-LDPC) codes and propose a line-counting based optimization scheme for minimizing the number of dominant absorbing sets in order to improve its performance in the high signal-to-noise ratio regime. Since the parity-check matrices of different nested sub-codes partially overlap, the optimization of one nested sub-code imposes constraints on the optimiza…
In this paper, we develop a new channel model, which we name the $q$-ary partial erasure channel (QPEC). QPEC has a $q$-ary input, and its output is either one symbol or a set of $M$ possible values. This channel mimics situations when current/voltage levels in measurement channels are only partially known, due to high read rates or imperfect current/voltage sensing. Our investigation is concentrated on the performance of low-density parity-pheck (LDPC) codes when used over this channel, due to their low decoding complexity with iterative-decoding algorithms. We give the density evolution equa…
Polar codes, as the first provable capacity-achieving error-correcting codes, have received much attention in recent years. However, the decoding performance of polar codes with traditional successive-cancellation (SC) algorithm cannot match that of the low-density parity-check (LDPC) or turbo codes. Because SC list (SCL) decoding algorithm can significantly improve the error-correcting performance of polar codes, design of SCL decoders is important for polar codes to be deployed in practical applications. However, because the prior latency reduction approaches for SC decoders are not applicab…
Quantum key distribution (QKD) is a cryptographic system that generates an information-theoretically secure key shared by two legitimate parties. QKD consists of two parts: quantum and classical. The latter is referred to as classical post-processing (CPP). Information reconciliation is a part of CPP in which parties are given correlated variables and attempt to eliminate the discrepancies between them while disclosing a minimum amount of information. The elegant reconciliation protocol known as \emph{Cascade} was developed specifically for QKD in 1992 and has become the de-facto standard for …
We address noisy message-passing decoding of lowdensity parity-check (LDPC) codes over additive white Gaussian noise channels. Message-passing decoders in which certain processing units iteratively exchange messages are common for decoding LDPC codes. The exchanged messages are in general subject to internal noise in hardware implementation of these decoders. We model the internal decoder noise as additive white Gaussian noise (AWGN) degrading exchanged messages. Using Gaussian approximation of the exchanged messages, we perform a two-dimensional density evolution analysis for the noisy LDPC d…
This paper considers the joint-decoding (JD) problem for finite-state channels (FSCs) and low-density parity-check (LDPC) codes. In the first part, the linear-programming (LP) decoder for binary linear codes is extended to JD of binary-input FSCs. In particular, we provide a rigorous definition of LP joint-decoding pseudo-codewords (JD-PCWs) that enables evaluation of the pairwise error probability between codewords and JD-PCWs in AWGN. This leads naturally to a provable upper bound on decoder failure probability. If the channel is a finite-state intersymbol interference channel, then the join…
