We analyze the thermoelectric cooling properties of a Corbino device in the quantum Hall regime on the basis of experimental data of electrical conductance. We focus on the cooling power and the coefficient of performance within and beyond linear response. Thermovoltage measurements in this device reported in {\em Phys. Rev. Applied, {\bf 14} 034019 (2020)} indicated that the transport takes place in the diffusive regime, without signatures of effects due to the electron-phonon interaction in a wide range of temperatures and filling factors. In this regime, the heat and charge currents by electrons can be described by a single transmission function. We infer this function from experimental data of conductance measurements and we calculate the cooling power and the coefficient of performance for a wide range of filling factors and temperatures, as functions of the thermal and electrical biases. We predict an interesting cooling performance in several parameter regimes.
We measure the thermoelectric response of Corbino structures in the quantum Hall effect regime and compare it with a theoretical analysis. The measured thermoelectric voltages are qualitatively and quantitatively simulated based upon the independent measurement of the conductivity indicating that they originate predominantly from the electron diffusion. Electron-phonon interaction does not lead to a phonon-drag contribution in contrast to earlier Hall-bar experiments. This implies a description of the Onsager coefficients on the basis of a single transmission function, from which both thermovo…
We study hydrodynamic electron transport in Corbino graphene devices. Due to the irrotational character of the flow, the forces exerted on the electron liquid are expelled from the bulk. We show that in the absence of Galilean invariance, force expulsion produces qualitatively new features in thermoelectric transport: (i) it results in drops of both voltage and temperature at the system boundaries and (ii) in conductance measurements in pristine systems, the electric field is not expelled from the bulk. We obtain thermoelectric coefficients of the system in the entire crossover region between …
We present an experimental technique to generate and measure a temperature bias in the quantum Hall effect of GaAs/AlGaAs Corbino samples. The bias is generated by injecting an electrical current at a central resistive heater and the resulting radial temperature drop is determined by conductance measurements at internal and external concentric rings. The experimental results agree with the predictions of numerical simulations of the heat flow through the substrate. We also compare these results with previous predictions based on the thermoelectric response of these devices
Whereas thermoelectric performance is normally limited by the figure of merit ZT, transverse thermoelectrics can achieve arbitrarily large temperature differences in a single leg even with inferior ZT by being geometrically tapered. We introduce a band-engineered transverse thermoelectric with p-type Seebeck in one direction and n-type orthogonal, resulting in off-diagonal terms that drive heat flow transverse to electrical current. Such materials are advantageous for microscale devices and cryogenic temperatures -- exactly the regimes where standard longitudinal thermoelectrics fail. InAs/GaS…
We theoretically investigate the enhancement of thermoelectric cooling performance in thermoelectric devices made of materials with inhomogeneous thermal conductivity, beyond the usual practice of enhancing thermoelectric figure of merit ZT. The dissipation of Joule heat in such thermoelectric devices is asymmetric which can give rise to better thermoelectric cooling performance. Although the thermoelectric figure of merit and the coefficient-of-performance are only slightly enhanced, both the maximum cooling power and the maximum cooling temperature difference can be enhanced significantly. T…
We propose a thermoelectric cooling device based on an atomic-sized junction. Using first-principles approaches, we investigate the working conditions and the coefficient of performance (COP) of an atomic-scale electronic refrigerator where the effects of phonon's thermal current and local heating are included. It is observed that the functioning of the thermoelectric nano-refrigerator is restricted to a narrow range of driving voltages. Compared with the bulk thermoelectric system with the overwhelmingly irreversible Joule heating, the 4-Al atomic refrigerator has a higher efficiency than a b…
We have studied thermoelectric effect of a Kane-Mele normal-insulator-superconductor (KMNIS) junction at ultra-low temperatures using a modified version of the well-known Blonder-Tinkham-Klapwijk (BTK) theory. Since both the (electronic) charge and thermal current due to the carriers are sensitive to the strengths of the spin-orbit coupling (SOC) present in the Kane-Mele model, a tunability of this junction device with regard to its thermoelectric properties can be experimentally achieved by certain techniques that are used to manipulate the values of the spin-orbit couplings. We have computed…
The possibility of using quantum Hall systems for thermoelectric energy conversion is investigated. It is shown that the massive degeneracy and the metallicity of a partially-filled Landau level enable thermoelectric cooling and power generation with unprecedented efficiency at low temperature. The figure of merit is explicitly derived for a transverse thermoelectric device using the $ν=0$ quantum Hall state of Dirac materials at charge neutrality, where due to electron-hole symmetry electrical Hall effect vanishes but thermoelectric Hall effect peaks.
Fast and controllable cooling at nanoscales requires a combination of highly efficient passive cooling and active cooling. While passive cooling in graphene-based devices is quite effective due to graphene's extraordinary heat-conduction, active cooling has not been considered feasible due to graphene's low thermoelectric power factor. Here we show that the thermoelectric performance of graphene can be significantly improved by using hBN substrates instead of SiO2. We find the room temperature efficiency of active cooling, as gauged by the power factor times temperature, reaches values as high…
We show that in mesoscopic four-terminal thermoelectric devices with two electrodes (the source and the drain) and two heat baths, inelastic scattering processes can lead to unconventional thermoelectric transport. The source (or the drain) can be cooled by passing a thermal current between the two heat baths, with no net heat exchange between the heat baths and the electrodes. This effect, termed as cooling by heat current, is a mesoscopic heat drag effect. In addition, there is a transverse thermoelectric effect where electrical current and power can be generated by a transverse temperature …
This brief review presents the emerging field of mesoscopic physics with cold atoms, with an emphasis on thermal and 'thermoelectric' transport, i.e. coupled transport of particle and entropy. We review in particular the comparison between theoretically predited and experimentally observed thermoelectric effects in such systems. We also show how combining well designed transport properties and evaporative cooling leads to an equivalent of the Peltier effect with cold atoms, which can be used as a new cooling procedure with improved cooling power and efficiency compared to the evaporative cooli…
We consider refrigeration and heat engine circuits based on the nonlinear thermoelectric response of point-contacts at pinch-off, allowing for electrostatic interaction effects. We show that a refrigerator can cool to much lower temperatures than predicted by the thermoelectric figure-of-merit ZT (which is based on linear-response arguments). The lowest achievable temperature has a discontinuity, called a fold catastrophe in mathematics, at a critical driving current I=I_c. For I >I_c one can in principle cool to absolute zero, when for I<I_c the lowest temperature is about half the ambient te…
Thermoelectric power of a material, typically governed by its band structure and carrier density, can be varied by chemical doping that is often restricted by solubility of the dopant. Materials showing large thermoelectric power are useful for many industrial applications, such as the heat-to-electricity conversion and the thermoelectric cooling device. Here we show a full electric field tuning of thermoelectric power in a dual-gated bilayer graphene device resulting from the opening of a band-gap by applying a perpendicular electric field on bilayer graphene. We uncover a large enhancement i…
Investigating the non-linear transport regime in a quantum dot heat engine described by the Anderson-Holstein model, it is shown that a finite electron-phonon interaction leads to a charge induced phonon generation that stimulates a phonon current even in the absence of a thermal gradient. This gives rise to the non-linear phonon Peltier effect which shows a non-trivial dependence on varying the electron-phonon interaction. Utilizing the reversal of phonon currents via charge induced phonon accumulation, we demonstrate that the heat engine surprisingly can be cooled when coupled to a hot reser…
An important goal in nanoelectromechanics is to cool the vibrational motion, ideally to its quantum ground state. Cooling by an applied charge current is a particularly simple and hence attractive strategy to this effect. Here, we explore this phenomenon in the context of the general theory of thermoelectrics. In linear response, this theory describes thermoelectric refrigerators in terms of their cooling efficiency and figure of merit ZT. We show that both concepts carry over to phonon cooling in nanoelectromechanical systems. As an important consequence, this allows us to discuss the efficie…
Thermoelectric effects allow the generation of electrical power from waste heat and the electrical control of cooling and heating. Remarkably, these effects are also highly sensitive to the asymmetry in the density of states around the Fermi energy and can therefore be exploited as probes of distortions in the electronic structure at the nanoscale. Here we consider two-dimensional graphene as an excellent nanoscale carbon material for exploring the interaction between electronic and thermal transport phenomena, by presenting a direct and quantitative measurement of the Peltier component to ele…
We investigate the electrical and thermal transport properties of the $α-T_3$ based normal metal-insulator-superconductor (NIS) junction using Blonder-Tinkham-Klapwijk (BTK) theory. We show that the tunneling conductance of the NIS junction is an oscillatory function of the effective barrier potential ($χ$) of the insulating region upto a thin barrier limit. The periodicity and the amplitudes of the oscillations largely depend on the values of $α$ and the gate voltage of the superconducting region, namely, $U_0$. Further, the periodicity of the oscillation changes from $π$ to $π/2$ as we incre…
We study thermoelectric effects in Coulomb-coupled quantum-dot (CCQD) systems beyond lowest-order tunneling processes and the often applied wide-band approximation. To this end, we present a master-equation (ME) approach based on a perturbative $T$-matrix calculation of the charge and heat tunneling rates and transport currents. Applying the method to transport through a non-interacting single-level QD, we demonstrate excellent agreement with the Landauer-B{ü}ttiker theory when higher-order (cotunneling) processes are included in the ME. Next, we study the effect of cotunneling and energy-depe…
We show that the Coulomb interaction between two circuits separated by an insulating layer leads to unconventional thermoelectric effects, such as the cooling by thermal current effect, the transverse thermoelectric effect and Maxwell's demon effect. The first refers to cooling in one circuit induced by the thermal current in the other circuit. The middle represents electric power generation in one circuit by the temperature gradient in the other circuit. The physical picture of Coulomb drag between the two circuits is first demonstrated for the case with one quantum dot in each circuits and t…
A generalization of Buttiker's voltage probe concept for nonzero temperatures is an open third terminal of a quantum thermoelectric circuit. An explicit analytic expression for the thermoelectric correction to an ideal quantum voltage measurement is derived, and interpreted in terms of local Peltier cooling/heating within the nonequilibrium system. The thermoelectric correction is found to be large (up to +-24% of the peak voltage) in a prototypical ballistic quantum conductor (graphene nanoribbon). The effects of measurement non-ideality are also investigated. Our findings have important impl…
Thermoelectric (TE) refrigeration such as Peltier cooler enables a unique opportunity in electric energy to directly convert thermal energy. Here, we propose a TE module with both refrigeration and power generation modes by utilizing asymmetric surfaces of a magnetic topological insulator (quantum anomalous Hall insulator) with a periodic array of hollows filled with two different dielectrics. Based on the Boltzmann transport theory, we show that its efficiency, i.e., the dimensionless figure of merit ZT exceeds 1 in the low-temperature regime below 300 K. The proposed device could be utilized…
We study the nonlinear thermoelectric cooling performance of a quantum spin Hall system. The setup consists of a nanomagnet contacting a Kramers' pair of helical edge states, resulting in a transmission probability with a rich structure containing peaks, well-type, and step-type features. We present a detailed analysis of the impact of all these features on the cooling performance, based to a large extent on analytical results. We analyze the cooling power as well as the coefficient of performance of the device. Since the basic features we study may be present in the transmission function of o…
The efficiency and cooling power of a two-terminal thermoelectric refrigerator are analyzed near the limit of vanishing dissipation (ideal system), where the optimal efficiency is the Carnot one, but the cooling power then unfortunately vanishes. This limit, where transport occurs only via a single sharp electronic energy, has been referred to as "strong coupling" or "the best thermoelectric". It follows however, that "parasitic" effects that make the system deviate from the ideal limit, and reduce the efficiency from the Carnot limit, are crucial for the usefulness of the device. Among these …
We report a concept of thermoelectric devices, cooperative spin caloritronics device (CSCD), where cooperation between two or more energy channels such as spin, charge and heat currents can significantly enhance energy efficiency of spin caloritronic devices. We derive the figure of merit and the maximum efficiency due to cooperative effect in analytic forms for a CSCD. Cooperative effects significantly improve the figure of merit and the maximum efficiency in spin caloritronic systems with multiply couplings effects. Several examples of CSCDs, including electrical and thermal current induced …
We review a series of works describing thermoelectric effects in gated disordered nanowires (field effect transistor device configuration). After considering the elastic coherent regime characterizing sub-Kelvin temperatures, we study the inelastic activated regime occurring at higher temperatures, where electronic transport is dominated by phonon-assisted hops between localised states (Mott variable range hopping). The thermoelectric effects are studied as a function of the location of the Fermi level inside the nanowire conduction band, notably around its edges where they become very large. …
The electrons forming a Cooper pair in a superconductor can be spatially separated preserving their spin entanglement by means of quantum dots coupled to both the superconductor and independent normal leads. We investigate the thermoelectric properties of such a Cooper pair splitter and demonstrate that cooling of a reservoir is an indication of non-local correlations induced by the entangled electron pairs. Moreover, we show that the device can be operated as a non-local thermoelectric heat engine. Both as a refrigerator and as a heat engine, the Cooper pair splitter reaches efficiencies clos…
We investigate direct energy and heat transfer between two distant sites of a triple quantum dot connected to reservoirs, where one of the edge dots is driven by an ac-gate voltage. We theoretically propose how to implement heat and cooling engines mediated by long range photoassisted transport. Additionally we propose a simple set up to heat up coherently the two reservoirs symmetrically and a mechanism to store energy in the closed system. The present proposals can be experimentally implemented and easily controlled by tunning the external parameters.
The energy efficiency and power of a quantum thermoelectric system with multiple electric currents and only one heat currents are studied. The system is connected to the hot heat bath with one terminal but the cold bath with multiple terminals or vice versal. We find that the cooperative effects can be a potentially useful tool in improving the energy efficiency and output power in multi-terminal mesoscopic thermoelectric systems. As an example, we show that the cooperation between the two thermoelectric effects in three-terminal thermoelectric systems leads to markedly improved performance of…
We present a comprehensive study of thermoelectric transport properties of a quantum nanoelectromechanical system (NEMS) described by a single-electron-transistor (SET) coupled to a quantum nanomechanical resonator (NR). The effects of a quantum NR on the electronic current are investigated with special emphasis on how the SET-NR coupling strength plays a role in such a NEMS. We find that the SET-NR coupling is not only able to suppress or enhance the thermoelectric current but can also switch its direction. The effect of the NR on the thermoelectric coefficients of the SET are studied and we …
The usually negligibly small thermoelectric effects in superconducting heterostructures can be boosted dramatically due to the simultaneous effect of spin splitting and spin filtering. Building on an idea of our earlier work [Phys. Rev. Lett. $\textbf{110}$, 047002 (2013)], we propose realistic mesoscopic setups to observe thermoelectric effects in superconductor heterostructures with ferromagnetic interfaces or terminals. We focus on the Seebeck effect being a direct measure of the local thermoelectric response and find that a thermopower of the order of $\sim200$ $μV/K$ can be achieved in a …
The Peltier effect is the reverse phenomenon of the Seebeck effect, and has been observed experimentally in nanoscale junctions. However, despite its promising applications in local cooling of nanoelectronic devices, the role of strong electron correlations on such a phenomenon is still unclear. Here, by analyzing the thermoelectric properties of quantum impurity systems out of equilibrium, we unveil the essential role of electron-electron interactions and quantum resonant states in Peltier cooling, leading to the prediction of the Kondo cooling phenomenon. The existence of such Kondo cooling …
We use the strongly temperature-dependent ionic mobility in polymer electrolytes to 'freeze in' specific ionic charge environments around a nanowire using a local wrap-gate geometry. This enables us to set both the threshold voltage for a conventional doped substrate gate and the local disorder potential at temperatures below 200 Kelvin, which we characterize in detail by combining conductance and thermovoltage measurements with modeling. Our results demonstrate that local polymer electrolyte gates are compatible with nanowire thermoelectrics, where they offer the advantage of a very low therm…
Spin-related effects in thermoelectricity can be used to design more efficient refrigerators and offer novel promising applications for the harvesting of thermal energy. The key challenge is to design structural and compositional magnetic material systems with sufficiently high efficiency and power output for transforming thermal energy into electric energy and vice versa. Here, the fabrication of large-area 3D interconnected Co/Cu nanowire networks is demonstrated, thereby enabling the controlled Peltier cooling of macroscopic electronic components with an external magnetic field. The flexibl…
We investigate the nonlocal thermoelectric transport in a Cooper-pair splitter based on a double-quantum-dot-superconductor three-terminal hybrid structure. We find that the nonlocal coupling between the superconductor and the quantum dots gives rise to nonlocal thermoelectric effects which originate from the nonlocal particle-hole breaking of the system. We show that Cooper-pair splitting induces the generation of a thermo-current in the superconducting lead without any transfer of charge between the two normal metal leads. Conversely, we show that a nonlocal heat exchange between the normal …
The timescale of electronic cooling is an important parameter controlling the performance of devices based on quantum materials for optoelectronic, thermoelectric and thermal management applications. In most conventional materials, cooling proceeds via the emission of phonons, a relatively slow process that can bottleneck the carrier relaxation dynamics, thus degrading the device performance. Here we present the theory of near-field radiative heat transfer, that occurs when a two-dimensional electron system is coupled via the non-retarded Coulomb interaction to a three-dimensional bulk that ca…
We propose a cooling scheme for fermionic quantum gases, based on the principles of the Peltier thermoelectric effect and energy filtering. The system to be cooled is connected to another harmonically trapped gas acting as a reservoir. The cooling is achieved by two simultaneous processes: (i) the system is evaporatively cooled and (ii) cold fermions from deep below the Fermi surface of the reservoir are injected below the Fermi level of the system, in order to fill the 'holes' in the energy distribution. This is achieved by a suitable energy dependence of the transmission coefficient connecti…
A three terminal nanoscale refrigeration concept based on a vibron-coupled quantum dot hybrid system coupled to two electronic reservoirs and a phonon bath is proposed and analyzed in detail. While investigating the non-trivial role of electron-phonon interactions, we show that, although they are well known to be detrimental from a general refrigeration perspective, can be engineered to favorably improve the trade-off between the cooling power (CP) and the coefficient-of-performance (COP). Furthermore, an additional improvement in the trade-off can be facilitated by applying a high electronic …
Charge carrier scattering is critical to the electrical properties of two-dimensional materials such as graphene, transition metal dichalcogenide monolayers, black phosphorene, and tellurene. Beyond pristine two-dimensional materials, further tailored properties can be achieved by nanoporous patterns such as nano- or atomic-scale pores (antidots) across the material. As one example, structure-dependent electrical/optical properties for graphene antidot lattices (GALs) have been studied in recent years. However, detailed charge carrier scattering mechanism is still not fully understood, which h…
In this paper, we propose van del Waals heterostructure-based thermionic devices for the applications in cooling and power generation in the temperature range of 300 to 400 K. By using two-dimensional materials of low cross-plane thermal conductivity as the barrier materials and graphene as electrodes, our calculation demonstrates that our proposed device will have a higher efficiency as compared to other methods such as thermoelectric device and the traditional thermionic devices. By using the parameters within the current technology, we predict a cooling capability at more than 50$\%$ of the…
