CHARA/MIRC-X -- a high-sensitive six telescope interferometric imager concept, commissioning, and early science
Narsireddy Anugu, Jean-Baptiste Le Bouquin, John D. Monnier, Stefan Kraus, Gail Schaefer, Benjamin R. Setterholm, Claire L Davies, Tyler Gardner, Aaron Labdon, … 展开作者
Narsireddy Anugu, Jean-Baptiste Le Bouquin, John D. Monnier, Stefan Kraus, Gail Schaefer, Benjamin R. Setterholm, Claire L Davies, Tyler Gardner, Aaron Labdon, Cyprien Lanthermann, Jacob Ennis, Theo ten Brummelaar, Judit Sturmann, Matt Anderson, Chris Farrington, Norm Vargas, Olli Majoinen
发表信息：
SPIE, Optical and Infrared Interferometry and Imaging VII, Proceedings Volume 11446, 114460N, Dec 14, 2020
MIRC-X is a six telescope beam combiner at the CHARA array that works in J and H wavelength bands and provides an angular resolution equivalent to a $B$=331m diameter telescope. The legacy MIRC combiner has delivered outstanding results in the fields of stellar astrophysics and binaries. However, we required higher sensitivity to make ambitious scientific measurements of faint targets such as young stellar objects, binary systems with exoplanets, and active galactic nuclei. For that purpose, MIRC-X is built and is offered to the community since mid-2017. MIRC-X has demonstrated up to two magnitudes of improved faint magnitude sensitivity with the best-case H <= 8. Here we present a review of the instrument and present early science results, and highlight some of our ongoing science programs.
MIRC-X is a new beam combination instrument at the CHARA array that enables 6-telescope interferometric imaging on object classes that until now have been out of reach for milliarcsecond-resolution imaging. As part of an instrumentation effort lead by the University of Exeter and University of Michigan, we equipped the MIRC instrument with an ultra-low read-noise detector system and extended the wavelength range to the J and H-band. The first phase of the MIRC-X commissioning was successfully completed in June 2017. In 2018 we will commission polarisation control to improve the visibility cali…
MIRC-X (Michigan InfraRed Combiner-eXeter) is a new highly-sensitive six-telescope interferometric imager installed at the CHARA Array that provides an angular resolution equivalent of up to a 330 m diameter baseline telescope in J and H band wavelengths ($\tfracλ{2B}\sim0.6$ milli-arcseconds). We upgraded the original MIRC (Michigan InfraRed Combiner) instrument to improve sensitivity and wavelength coverage in two phases. First, a revolutionary sub-electron noise and fast-frame rate C-RED ONE camera based on a SAPHIRA detector was installed. Second, a new-generation beam combiner was designe…
MIRC-X is an upgrade of the six-telescope infrared beam combiner at the CHARA telescope array, the world's largest baseline interferometer in the optical/infrared, located at the Mount Wilson Observatory in Los Angeles. The upgraded instrument features an ultra-low noise and fast frame rate infrared camera (SAPHIRA detector) based on e-APD technology. We report the MIRC-X sensitivity upgrade work and first light results in detail focusing on the detector characteristics and software architecture.
Cophasing six telescopes from the CHARA array, the CHARA-Michigan Phasetracker (CHAMP) and Michigan Infrared Combiner (MIRC) are pushing the frontiers of infrared long-baseline interferometric imaging in key scientific areas such as star- and planet-formation. Here we review our concepts and recent improvements on the CHAMP and MIRC control interfaces, which establish the communication to the real-time data recording & fringe tracking code, provide essential performance diagnostics, and assist the observer in the alignment and flux optimization procedure. For fringe detection and tracking with…
We implement an electron avalanche photodiode (e-APD) in the MIRC-X instrument, upgrade of the 6-telescope near-infrared imager MIRC, at the CHARA array. This technology should improve the sensitivity of near-infrared interferometry. We first used the classical Mean-Variance analysis to measure the system gain and the amplification gain. We then developed a physical model of the statistical distribution of the camera output signal. This model is based on multiple convolutions of the Poisson statistic, the intrinsic avalanche gain distribution, and the observed distribution of the background si…
SPICA-FT is part of the CHARA/SPICA instrument which combines a visible 6T fibered instrument (SPICAVIS) with a H-band 6T fringe sensor. SPICA-FT is a pairwise ABCD integrated optics combiner. The chip is installed in the MIRC-X instrument. The MIRC-X spectrograph could be fed either by the classical 6T fibered combiner or by the SPICA-FT integrated optics combiner. SPICA-FT also integrates a dedicated fringe tracking software, called the opd-controller communicating with the main delay line through a dedicated channel. We present the design of the integrated optics chip, its implementation in…
The Keck Planet Imager and Characterizer (KPIC) is an upgrade to the Keck II adaptive optics system and instrument suite with the goal of improving direct imaging and high-resolution spectroscopic characterization capabilities for giant exoplanets. KPIC Phase I includes a fiber injection unit (FIU) downstream of a new pyramid wavefront sensor, coupling planet light to a single mode fiber fed into NIRSPEC, Keck's high-resolution infrared spectrograph. This enables high-dispersion spectroscopy (HDS) of directly imaged exoplanets at smaller separation and higher contrast, improving our spectral c…
On-sky demonstration of dual-field interferometry at the CHARA Array
The CHARA Array of Georgia State University Mount Wilson Observatory Mount Wilson California USA（佐治亚州立大学查拉阵列威尔逊山天文台）；Department of Astronomy University of Michigan Ann Arbor Michigan USA（密歇根大学天文学系）；School of Physics and Astronomy University of Exeter Exeter United Kingdom（埃克塞特大学物理与天文学院）；Université Côte d’Azur Observatoire de la Côte d’Azur CNRS Laboratoire Lagrange Nice France（蔚蓝海岸大学蔚蓝海岸天文台法国国家科学研究中心拉格朗日实验室）
The Keck Planet Imager and Characterizer (KPIC) is a series of upgrades for the Keck II Adaptive Optics (AO) system and the NIRSPEC spectrograph to enable diffraction-limited, high-resolution ($R>30,000$) spectroscopy of exoplanets and low-mass companions in the K and L bands. Phase I consisted of single-mode fiber injection/extraction units (FIU/FEU) used in conjunction with an H-band pyramid wavefront sensor. Phase II, deployed and commissioned in 2022, adds a 1000-actuator deformable mirror, beam-shaping optics, a vortex coronagraph, and other upgrades to the FIU/FEU. The use of single-mode…
Thermal and Optical Characterization of Near-Earth Objects: Science Commissioning of the Recently Upgraded Mid-Infrared Camera MIRSI on the NASA Infrared Telescope Facility
We present the results of commissioning observations for a new digital beamforming back end for the Focal plane L-band Array for the Robert C. Byrd Green Bank Telescope (FLAG), a cryogenically cooled Phased Array Feed (PAF) with the lowest measured T_sys/eta of any PAF outfitted on a radio telescope to date. We describe the custom software used to apply beamforming weights to the raw element covariances to create research quality spectral line images for the new fine-channel mode, study the stability of the beam weights over time, characterize FLAG's sensitivity over a frequency range of 150 M…
The \oarpaf telescope is an $80\rm cm$-diameter optical telescope installed in the Antola Mount Regional Reserve, in Northern Italy. This work presents the results of the characterization of the site, as well as developments and interventions that have been implemented, with the goal of exploiting the facility for scientific and educational purposes. During the characterization of the site, an average background brightness of $22.40 \, m_{AB}$ ($B$ filter) -- $21.14 \, m_{AB}$ ($I$) per arcsecond squared, and a $1.5$--$3.0"$ seeing, have been measured. An estimate of the magnitude zero points …
In the period 2012 June - 2013 October, the Sardinia Radio Telescope (SRT) went through the technical commissioning phase. The characterization involved three first-light receivers, ranging in frequency between 300MHz and 26GHz, connected to a Total Power back-end. It also tested and employed the telescope active surface installed in the main reflector of the antenna. The instrument status and performance proved to be in good agreement with the expectations in terms of surface panels alignment (at present 300 um rms to be improved with microwave holography), gain (~0.6 K/Jy in the given freque…
The James Webb Space Telescope (JWST) will revolutionize the field of high-contrast imaging and enable both the direct detection of Saturn-mass planets and the characterization of substellar companions in the mid-infrared. While JWST will feature unprecedented sensitivity, angular resolution will be the key factor when competing with ground-based telescopes. Here, we aim to characterize the performance of several extreme angular resolution imaging techniques available with JWST in the 3-5 micron regime based on data taken during commissioning. Firstly, we introduce custom tools to simulate, re…
In preparation for the Dark Energy Spectroscopic Instrument (DESI), a new top end was installed on the Mayall 4-meter telescope at Kitt Peak National Observatory. The refurbished telescope and the DESI instrument were successfully commissioned on sky between 2019 October and 2020 March. Here we describe the pointing, tracking and imaging performance of the Mayall telescope equipped with its new DESI prime focus corrector, as measured by six guider cameras sampling the outer edge of DESI's focal plane. Analyzing ~500,000 guider images acquired during commissioning, we find a median delivered im…
GIARPS (GIAno \& haRPS) is a project devoted to have on the same focal station of the Telescopio Nazionale Galileo (TNG) both high resolution spectrographs, HARPS-N (VIS) and GIANO-B (NIR), working simultaneously. This could be considered the first and unique worldwide instrument providing cross-dispersed echelle spectroscopy at a resolution of 50,000 in the NIR range and 115,000 in the VIS and over in a wide spectral range ($0.383 - 2.45\ μ$m) in a single exposure. The science case is very broad, given the versatility of such an instrument and its large wavelength range. A number of outstandi…
We present the design for MYSTIC, the Michigan Young STar Imager at CHARA. MYSTIC will be a K-band, cryogenic, 6-beam combiner for the Georgia State University CHARA telescope array. The design follows the image-plane combination scheme of the MIRC instrument where single-mode fibers bring starlight into a non-redundant fringe pattern to feed a spectrograph. Beams will be injected in polarization-maintaining fibers outside the cryogenic dewar and then be transported through a vacuum feedthrough into the ~220K cold volume where combination is achieved and the light is dispersed. We will use a C…
We present the design and commissioning of Project Solaris, a global network of autonomous observatories. Solaris is a Polish scientific undertaking aimed at the detection and characterization of circumbinary exoplanets and eclipsing binary stars. To accomplish this, a network of four fully autonomous observatories has been deployed in the Southern Hemisphere: Solaris-1 and Solaris-2 in the South African Astronomical Observatory in South Africa; Solaris-3 in Siding Spring Observatory in Australia; and Solaris-4 in Complejo Astronomico El Leoncito in Argentina. The four stations are nearly iden…
The MINiature Exoplanet Radial Velocity Array (MINERVA) is a US-based observational facility dedicated to the discovery and characterization of exoplanets around a nearby sample of bright stars. MINERVA employs a robotic array of four 0.7 m telescopes outfitted for both high-resolution spectroscopy and photometry, and is designed for completely autonomous operation. The primary science program is a dedicated radial velocity survey and the secondary science objective is to obtain high precision transit light curves. The modular design of the facility and the flexibility of our hardware allows f…
The Calar Alto Fiber-fed Échelle spectrograph (CAFE) is a high-resolution spectrographs with high-precision radial velocity capabilities mounted in the 2.2m telescope of Calar Alto Observatory. It suffered from strong degradation after 4 years of operations and it has now been upgraded. The upgrades of the instrument (now named CAFE$_2$) aimed at improving the throughput and stability thanks to the inclusion of a new grating, an active temperature control in the isolated coudé room, and a new scrambling system among other minor changes. In this paper, we present the results of the re-commissio…
The fringe sensor unit (FSU) is the central element of the phase referenced imaging and micro-arcsecond astrometry (PRIMA) dual-feed facility for the Very Large Telescope interferometer (VLTI). It has been installed at the Paranal observatory in August 2008 and is undergoing commissioning and preparation for science operation. Commissioning observations began shortly after installation and first results include the demonstration of spatially encoded fringe sensing and the increase in VLTI limiting magnitude for fringe tracking. However, difficulties have been encountered because the FSU does n…
The Minerva-Australis telescope array is a facility dedicated to the follow-up, confirmation, characterisation, and mass measurement of bright transiting planets discovered by the Transiting Exoplanet Survey Satellite (TESS) -- a category in which it is almost unique in the southern hemisphere. It is located at the University of Southern Queensland's Mount Kent Observatory near Toowoomba, Australia. Its flexible design enables multiple 0.7m robotic telescopes to be used both in combination, and independently, for high-resolution spectroscopy and precision photometry of TESS transit planet cand…
QUIJOTE scientific results - XX. Commissioning and First Results from the Thirty and Forty Gigahertz Instrument (TFGI)
Laboratoire de Physique Subatomique et de Cosmologie, Université Grenoble Alpes, CNRS/IN2P3（亚原子物理与宇宙学实验室，格勒诺布尔阿尔卑斯大学，法国国家科学研究中心/法国国家粒子物理研究所）；Instituto de Astrofísica de Canarias（加那利群岛天体物理研究所）；Departamento de Astrofísica, Universidad de La Laguna（拉帕尔马大学天体物理学系）；Universidade da Coruña, CITIC（科鲁尼亚大学，信息技术创新中心）；Kavli Institute for the Physics and Mathematics of the Universe (Kavli IPMU, WPI), UTIAS, The University of Tokyo（Kavli宇宙物理与数学研究所（ Kavli IPMU, WPI），UTIAS，东京大学）；Instituto de Fisica de Cantabria (IFCA, CSIC-UC)（坎塔布里亚物理研究所（ IFCA, 西班牙国家研究委员会-坎塔布里亚大学））
The TBT project is being developed under ESA's General Studies and Technology Programme (GSTP), and shall implement a test-bed for the validation of an autonomous optical observing system in a realistic scenario within the Space Situational Awareness (SSA) programme of the European Space Agency (ESA). The goal of the project is to provide two fully robotic telescopes, which will serve as prototypes for development of a future network. The system consists of two telescopes, one in Spain and the second one in the Southern Hemisphere. The telescope is a fast astrograph with a large Field of View …
Optical interferometry is a powerful technique to achieve high angular resolution. However, its main issue is its lack of sensitivity, compared to other observation techniques. Efforts have been made in the previous decade to improve the sensitivity of optical interferometry, with instruments such as PIONIER and GRAVITY at VLTI, or MIRC-X and MYSTIC at CHARA. While those instruments pushed on sensitivity, their design focus was not the sensitivity but relative astrometric accuracy, imaging capability, or spectral resolution. Our goal is to build an instrument specifically designed to optimize …
With a possible angular resolution down to 0.1-0.2 millisecond of arc using the 330 m baselines and the access to the 600-900 nm spectral domain, the CHARA Array is ideally configured for focusing on precise and accurate fundamental parameters of stars. CHARA/SPICA (Stellar Parameters and Images with a Cophased Array) aims at performing a large survey of stars all over the Hertzsprung-Russell diagram. This survey will also study the effects of the different kinds of variability and surface structure on the reliability of the extracted fundamental parameters. New surface-brightness-colour relat…
