This paper investigates an intelligent reflecting surface (IRS) aided cooperative communication network, where the IRS exploits large reflecting elements to proactively steer the incident radio-frequency wave towards destination terminals (DTs). As the number of reflecting elements increases, the reflection resource allocation (RRA) will become urgently needed in this context, which is due to the non-ignorable energy consumption. The goal of this paper, therefore, is to realize the RRA besides the active-passive beamforming design, where RRA is based on the introduced modular IRS architecture. The modular IRS consists with multiple modules, each of which has multiple reflecting elements and is equipped with a smart controller, all the controllers can communicate with each other in a point-to-point fashion via fiber links. Consequently, an optimization problem is formulated to maximize the minimum SINR at DTs, subject to the module size constraint and both individual source terminal (ST) transmit power and the reflecting coefficients constraints. Whereas this problem is NP-hard due to the module size constraint, we develop an approximate solution by introducing the mixed row block $\ell_{1,F}$-norm to transform it into a suitable semidefinite relaxation. Finally, numerical results demonstrate the meaningfulness of the introduced modular IRS architecture.
In this paper, we derive the uplink achievable rate expression of intelligent reflecting surface (IRS)-aided millimeter-wave (mmWave) systems, taking into account the phase noise at IRS and the quantization error at base stations (BSs). We show that the performance is limited only by the resolution of analog-digital converters (ADCs) at BSs when the number of IRS reflectors grows without bound. On the other hand, if BSs have ideal ADCs, the performance loss caused by IRS phase noise is a constant. Finally, our results validate the feasibility of using low-precision hardware at the IRS when BSs…
We investigate the use of an intelligent reflecting surface (IRS) in a millimeter-wave (mmWave) vehicular communication network. An intelligent reflecting surface consists of passive elements, which can reflect the incoming signals with adjustable phase shifts. By properly tuning the phase shifts we can improve link performance. This is known as phase optimization or passive beamforming. We consider the problem of rate maximization in the uplink, which utilizes an IRS. However, using an IRS brings more challenges in terms of channel estimation. We propose two schemes to reduce the channel esti…
Intelligent reflecting surface (IRS) has emerged as a revolutionizing solution to enhance wireless communications by intelligently changing the propagation environment. Prior studies on IRS are based on an ideal reflection model with a constant amplitude and a variable phase shift. However, it is difficult and unrealistic to implement an IRS satisfying such ideal reflection model in practical applications. In this letter, we aim to investigate the phase-amplitude-frequency relationship of the reflected signals and propose a practical model of reflection coefficient for an IRS-aided wideband sy…
Intelligent reflecting surface (IRS) is envisioned as a promising solution for controlling radio propagation environments in future wireless systems. In this paper, we propose a distributed intelligent reflecting surface (IRS) assisted multi-user millimeter wave (mmWave) system, where IRSs are exploited to enhance the mmWave signal coverage when direct links between base station and users are unavailable. First, a joint active and passive beamforming problem is established for weighted sum-rate maximization. Then, an alternating iterative algorithm with closed-form expressions is proposed to t…
In this letter, secure beamforming in a multiple intelligent reflecting surfaces (IRSs)-aided millimeter-wave (mmWave) system is investigated. In this system, the secrecy rate is maximized by controlling the on-off status of each IRS as well as optimizing the phase shift matrix of the IRSs. This problem is posed as a joint optimization problem of transmit beamforming and IRS control, whose goal is to maximize the secrecy rate under the total transmission power and unit-modulus constraints. The problem is difficult to solve optimally due to the nonconvexity of constraint conditions and coupled …
This letter studies a cloud radio access network (C-RAN) with multiple intelligent reflecting surfaces (IRS) deployed between users and remote radio heads (RRH). Specifically, we consider the uplink transmission where each RRH quantizes the received signals from the users by either point-to-point compression or Wyner-Ziv compression and then transmits the quantization bits to the BBU pool through capacity limited fronthhual links. To maximize the uplink sum rate, we jointly optimize the passive beamformers of IRSs and the quantization noise covariance matrices of fronthoul compression. An join…
Intelligent reflecting surface (IRS) has emerged as a promising and revolutionizing technology for future wireless networks. Most existing IRS studies focus on simple cooperative systems which usually have a single frequency band. In realistic non-cooperative multi-band networks, however, the existing IRS designs may be not applicable or have severe performance degradation. Thus, in the complex network environment, it is more rational to consider IRSs as public resources to be dynamically allocated to appropriate users. In this paper, we first introduce the auction theory to tackle the resourc…
Simultaneous wireless information and power transfer (SWIPT) and intelligent reflecting surface (IRS) are two promising techniques for providing enhanced wireless communication capability and sustainable energy supply to energy-constrained wireless devices. Moreover, the combination of the IRS and the SWIPT can create the "one plus one greater than two" effect. However, due to the broadcast nature of wireless media, the IRS-aided SWIPT systems are vulnerable to eavesdropping. In this paper, we study the security issue of the IRS-aided SWIPT systems. The objective is to maximize the secrecy rat…
Intelligent reflecting surfaces (IRSs) are envisioned to provide reconfigurable wireless environments for future communication networks. In this paper, both downlink and uplink IRS-aided non-orthogonal multiple access (NOMA) and orthogonal multiple access (OMA) networks are studied, in which an IRS is deployed to enhance the coverage by assisting a cell-edge user device (UD) to communicate with the base station (BS). To characterize system performance, new channel statistics of the BS-IRS-UD link with Nakagami-$m$ fading are investigated. For each scenario, the closed-form expressions for the …
In this paper, the intelligent reflecting surface (IRS)-aided unmanned aerial vehicle (UAV) communication system is studied, where the UAV is deployed to serve the user equipment (UE) with the assistance of multiple IRSs mounted on several buildings to enhance the communication quality between UAV and UE. We aim to maximize the energy efficiency of the system, including the data rate of UE and the energy consumption of UAV via jointly optimizing the UAV's trajectory and the phase shifts of reflecting elements of IRS, when the UE moves and the selection of IRSs is considered for the energy savi…
Non-orthogonal multiple access (NOMA) enabled fog radio access networks (NOMA-F-RANs) have been taken as a promising enabler to release network congestion, reduce delivery latency, and improve fog user equipments' (F-UEs') quality of services (QoS). Nevertheless, the effectiveness of NOMA-F-RANs highly relies on the charted feature information (preference distribution, positions, mobilities, etc.) of F-UEs as well as the effective caching, computing, and resource allocation strategies. In this article, we explore how artificial intelligence (AI) techniques are utilized to solve foregoing treme…
Maneuvering target sensing will be an important service of future vehicular networks, where precise velocity estimation is one of the core tasks. To this end, the recently proposed integrated sensing and communications (ISAC) provides a promising platform for achieving accurate velocity estimation. However, with one mono-static ISAC base station (BS), only the radial projection of the true velocity can be estimated, which causes serious estimation error. In this paper, we investigate the estimation of the true velocity of a maneuvering target with the assistance of an intelligent reflecting su…
The combination of non-orthogonal multiple access(NOMA) and cooperative communications can be a suitable solution for fifth generation (5G) and beyond 5G (B5G) wireless systems with massive connectivity, because it can provide higher spectral efficiency, lower energy consumption, and improved fairness compared to the non-cooperative NOMA. However,the receiver complexity in the conventional cooperative NOMA increases with increasing number of users owing to successive interference cancellation (SIC) at each user. Space time block code-aided cooperative NOMA (STBC-CNOMA) offers less numbers of S…
In this paper, we study an intelligent omni-surface (IOS)-assisted downlink communication system, where the link quality of a mobile user (MU) can be improved with a proper IOS phase shift design. Unlike the intelligent reflecting surface (IRS) in most existing works that only forwards the signals in a reflective way, the IOS is capable to forward the received signals to the MU in either a reflective or a transmissive manner, thereby enhancing the wireless coverage. We formulate an IOS phase shift optimization problem to maximize the downlink spectral efficiency (SE) of the MU. The optimal pha…
In this paper, we focus on the sum-rate optimization in a multi-user millimeter-wave (mmWave) system with distributed intelligent reflecting surfaces (D-IRSs), where a base station (BS) communicates with users via multiple IRSs. The BS transmit beamforming, IRS switch vector, and phase shifts of the IRS are jointly optimized to maximize the sum-rate under minimum user rate, unit-modulus, and transmit power constraints. To solve the resulting non-convex optimization problem, we develop an efficient alternating optimization (AO) algorithm. Specifically, the non-convex problem is converted into t…
An intelligent reflecting surface (IRS) is invoked for enhancing the energy harvesting performance of a simultaneous wireless information and power transfer (SWIPT) aided system. Specifically, an IRS-assisted SWIPT system is considered, where a multi-antenna aided base station (BS) communicates with several multi-antenna assisted information receivers (IRs), while guaranteeing the energy harvesting requirement of the energy receivers (ERs). To maximize the weighted sum rate (WSR) of IRs, the transmit precoding (TPC) matrices of the BS and passive phase shift matrix of the IRS should be jointly…
In this paper, a novel cooperation-aided localization and tracking approach, suitable for terahertz (THz) wireless systems is presented. It combines an angle of arrival (AoA) tracking algorithm with the two-way time of arrival method, in order to accurately track the user equipment (UE) position and reduce the deafness caused by the estimation errors of the tracking algorithms. This algorithm can be used by one base station (BS) to estimate the UE position, or by multiple BSs, that cooperate with each other to increase the accuracy of the estimations, as well as the probability of successful e…
It is known that the capacity of the intelligent reflecting surface (IRS) aided cellular network can be effectively improved by reflecting the incident signals from the transmitter in a low-cost passive reflecting way. In this paper, we study the adoption of an IRS for downlink multi-user communication from a multi-antenna base station (BS). Nevertheless, in the actual network operation, the IRS operator can be selfish or have its own objectives due to competing/limited resources as well as deployment/maintenance cost. Therefore, in this paper, we develop a Stackelbeg game model to analyze the…
In this paper, we consider the weighted sum-power minimization under quality-of-service (QoS) constraints in the multi-user multi-input-single-output (MISO) uplink wireless network assisted by intelligent reflecting surface (IRS). We perform a comprehensive investigation on various aspects of this problem. First, when users have sufficient transmit powers, we present a new sufficient condition guaranteeing arbitrary information rate constraints. This result strengthens the feasibility condition in existing literature. Then, we design novel penalty dual decomposition (PDD) based and nonlinear e…
In this letter, we consider a multicast system where a single-antenna transmitter sends a common message to multiple single-antenna users, aided by an intelligent reflecting surface (IRS) equipped with $N$ passive reflecting elements. Prior works on IRS have mostly assumed the availability of channel state information (CSI) for designing its passive beamforming. However, the acquisition of CSI requires substantial training overhead that increases with $N$. In contrast, we propose in this letter a novel \emph{random passive beamforming} scheme, where the IRS performs independent random reflecti…
In this paper, we consider the weighted sum-power minimization under quality-of-service (QoS) constraints in the multi-user multi-input-single-output (MISO) uplink wireless network assisted by intelligent reflecting surface (IRS). We perform a comprehensive investigation on various aspects of this problem. First, when users have sufficient transmit powers, we present a new sufficient condition guaranteeing arbitrary information rate constraints. This result strengthens the feasibility condition in existing literature. Then, we design novel penalty dual decomposition (PDD) based and nonlinear e…
Reconfigurable intelligent surfaces (RISs) have emerged as a cost- and energy-efficient technology that can customize and program the physical propagation environment by reflecting radio waves in preferred directions. However, the purely passive reflection of RISs not only limits the end-to-end channel beamforming gains, but also hinders the acquisition of accurate channel state information for the phase control at RISs. In this paper, we provide an overview of a hybrid relay-reflecting intelligent surface (HR-RIS) architecture, in which only a few elements are active and connected to power am…
Perfect channel state information (CSI) is challenging to obtain due to the limited signal processing capability at the intelligent reflection surface (IRS). In this paper, we study the worst-case robust beamforming design for an IRS-aided multiuser multiple-input single-output (MU-MISO) system under the assumption of imperfect CSI. We aim for minimizing the transmit power while ensuring that the achievable rate of each user meets the quality of service (QoS) requirement for all possible channel error realizations. With unit-modulus and rate constraints, this problem is non-convex. The imperfe…
Mobile edge computing (MEC) is envisioned as a promising technique to support computation-intensive and timecritical applications in future Internet of Things (IoT) era. However, the uplink transmission performance will be highly impacted by the hostile wireless channel, the low bandwidth, and the low transmission power of IoT devices. Recently, intelligent reflecting surface (IRS) has drawn much attention because of its capability to control the wireless environments so as to enhance the spectrum and energy efficiencies of wireless communications. In this paper, we consider an IRS-aided multi…
School of Mechanical Engineering, Beijing Institute of Technology（北京理工大学机械工程学院）
This paper develops a stop line aided cooperative positioning framework for connected vehicles, which creatively utilizes the location of the stop-line to achieve the positioning enhancement for a vehicular ad-hoc network (VANET) in intersection scenarios via Vehicle-to-Vehicle (V2V) communication. Firstly, a self-positioning correction scheme for the first stopped vehicle is presented, which applied the stop line information as benchmarks to correct the GNSS/INS positioning results. Then, the local observations of each vehicle are fused with the position estimates of other vehicles and the in…
The intelligent reflecting surface (IRS) technology has recently attracted a lot of interest in wireless communications research. An IRS consists of passive reflective elements capable of tuning the phase, amplitude, frequency and polarization of the impinging waveforms. Given such desirable properties, the wireless channel characteristics can be controlled and optimized for specific signal design and processing needs -- thus promising significant potential in radar applications. In this paper, we establish the theoretical foundations for introducing IRS into a radar system and study the poten…
In this paper, we study the performance of wideband terahertz (THz) communications assisted by an intelligent reflecting surface (IRS). Specifically, we first introduce a generalized channel model that is suitable for electrically large THz IRSs operating in the near-field. Unlike prior works, our channel model takes into account the spherical wavefront of the emitted electromagnetic waves and the spatial-wideband effect. We next show that conventional frequency-flat beamfocusing significantly reduces the power gain due to beam squint, and hence is highly suboptimal. More importantly, we analy…
The growing demand for virtual reality (VR) applications requires wireless systems to provide a high transmission rate to support 360-degree video streaming to multiple users simultaneously. In this paper, we propose an intelligent reflecting surface (IRS)-aided rate-splitting (RS) VR streaming system. In the proposed system, RS facilitates the exploitation of the shared interests of the users in VR streaming, and IRS creates additional propagation channels to support the transmission of high-resolution 360-degree videos. IRS also enhances the capability to mitigate the performance bottleneck …
This paper studies the estimation of cascaded channels in passive intelligent reflective surface (IRS)- aided multiple-input multiple-output (MIMO) systems employing hybrid precoders and combiners. We propose a low-complexity solution that estimates the channel parameters progressively. The angles of departure (AoDs) and angles of arrival (AoAs) at the transmitter and receiver, respectively, are first estimated using inductive matrix completion (IMC) followed by root-MUSIC based super-resolution spectrum estimation. Forward-backward spatial smoothing (FBSS) is applied to address the coherence …
Computation off-loading in mobile edge computing (MEC) systems constitutes an efficient paradigm of supporting resource-intensive applications on mobile devices. However, the benefit of MEC cannot be fully exploited, when the communications link used for off-loading computational tasks is hostile. Fortunately, the propagation-induced impairments may be mitigated by intelligent reflecting surfaces (IRS), which are capable of enhancing both the spectral- and energy-efficiency. Specifically, an IRS comprises an IRS controller and a large number of passive reflecting elements, each of which may im…
Reducing computational complexity is crucial in optimizing the phase shifts of Intelligent Reflecting Surface (IRS) systems since IRS-assisted communication systems are generally deployed with a large number of reflecting elements (REs). This letter proposes a low-complexity algorithm, designated as Dimension-wise Sinusoidal Maximization (DSM), to obtain the optimal IRS phase shifts that maximize the sum capacity of a MIMO network. The algorithm exploits the fact that the objective function for the optimization problem is sinusoidal w.r.t. the phase shift of each RE. The numerical results show…
Intelligent reflecting surface (IRS) is a new promising technology that is able to manipulate the wireless propagation channel via smart and controllable signal reflection. In this paper, we investigate the capacity region of a multiple access channel (MAC) with two users sending independent messages to an access point (AP), aided by $M$ IRS reflecting elements. We consider two practical IRS deployment strategies that lead to different user-AP effective channels, namely, the distributed deployment where the $M$ reflecting elements form two IRSs, each deployed in the vicinity of one user, versu…
This paper investigates the achievable rate region of the multiple-input single-output (MISO) interference channel aided by intelligent reflecting surfaces (IRSs). We exploit the the additional design degree of freedom provided by the coordinated IRSs to enhance the desired signal and suppress interference so as to enlarge the achievable rate region of the interference channel. To this end, we jointly optimize the active transmit beamforming at the transmitters and passive reflective beamforming at the IRSs, subject to the constant modulus constraints of reflective beamforming vectors. To addr…
Heriot-Watt University（赫瑞瓦特大学）；University of Glasgow（格拉斯哥大学）；University College London（伦敦大学学院）；Universitas Kristen Indonesia Paulus（印度尼西亚保罗克里斯蒂安大学）
This paper considers machine learning for physical layer security design for communication in a challenging wireless environment. The radio environment is assumed to be programmable with the aid of a meta material-based intelligent reflecting surface (IRS) allowing customisable path loss, multi-path fading and interference effects. In particular, the fine-grained reflections from the IRS elements are exploited to create channel advantage for maximizing the secrecy rate at a legitimate receiver. A deep learning (DL) technique has been developed to tune the reflections of the IRS elements in rea…
This paper investigates multiple intelligent reflecting surfaces (IRSs) aided wireless network, where the IRSs are deployed to cooperatively assist communications between a multi-antenna base station (BS) and multiple single-antenna cell-edge users. We aim at maximizing the weighted sum rate of all the cell-edge users by jointly optimizing the BS's transmit beamforming and IRS's phase shifts. Especially, the beamforming is optimally solved by the Lagrangian method, and the phase shifts are obtained based on the Riemannian manifold conjugate gradient (RMCG) method. Numerical results show that a…
Integrated sensing and communication (ISAC) is recognized as a promising technology with great potential in saving hardware and spectrum resources, since it simultaneously realizes radar detection and user communication functions in the fully-shared platform. Employing reconfigurable intelligent surface (RIS) in ISAC systems is able to provide a virtual line-of-sight (LoS) path to conquer blockage problem as well as introduce new degrees of freedom (DoFs) to further enhance system performance. Nevertheless, the multiplicative fading effect of passive RIS limits its applications in the absence …
This paper proposes a novel location information aided multiple intelligent reflecting surface (IRS) systems. Assuming imperfect user location information, the effective angles from the IRS to the users are estimated, which is then used to design the transmit beam and IRS beam. Furthermore, closed-form expressions for the achievable rate are derived. The analytical findings indicate that the achievable rate can be improved by increasing the number of base station (BS) antennas or reflecting elements. Specifically, a power gain of order $N M^2$ is achieved, where $N$ is the antenna number and $…
This paper investigates a device-to-device (D2D) cooperative computing system, where an user can offload part of its computation task to nearby idle users with the aid of an intelligent reflecting surface (IRS). We propose to minimize the total computing delay via jointly optimizing the computation task assignment, transmit power, bandwidth allocation, and phase beamforming of the IRS. To solve the formulated problem, we devise an alternating optimization algorithm with guaranteed convergence. In particular, the task assignment strategy is derived in closed-form expression, while the phase bea…
Intelligent reflecting surface (IRS) is an emerging technology that is able to significantly improve the performance of wireless communications, by smartly tuning signal reflections at a large number of passive reflecting elements. On the other hand, with ubiquitous wireless devices and ambient radio-frequency signals, wireless sensing has become a promising new application for the next-generation/6G wireless networks. By synergizing low-cost IRS and fertile wireless sensing applications, this article proposes a new IRS-aided sensing paradigm for enhancing the performance of wireless sensing c…
Wireless powered mobile edge computing (WP-MEC) has been recognized as a promising technique to provide both enhanced computational capability and sustainable energy supply to massive low-power wireless devices. However, its energy consumption becomes substantial, when the transmission link used for wireless energy transfer (WET) and for computation offloading is hostile. To mitigate this hindrance, we propose to employ the emerging technique of intelligent reflecting surface (IRS) in WP-MEC systems, which is capable of providing an additional link both for WET and for computation offloading. …
Integrating the reconfigurable intelligent surface in a cell-free (RIS-CF) network is an effective solution to improve the capacity and coverage of future wireless systems with low cost and power consumption. The reflecting coefficients of RISs can be programmed to enhance signals received at users. This letter addresses a joint design of transmit beamformers at access points and reflecting coefficients at RISs to maximize the energy efficiency (EE) of RIS-CF networks, taking into account the limited backhaul capacity constraints. Due to a very computationally challenging nonconvex problem, we…
Reconfigurable intelligent surface (RIS) is considered as a promising solution for next-generation wireless communication networks due to a variety of merits, e.g., customizing the communication environment. Therefore, deploying multiple RISs helps overcome severe signal blocking between the base station (BS) and users, which is also a practical and effective solution to achieve better service coverage. However, reaping the full benefits of a multi-RISs aided communication system requires solving a non-convex, infinite-dimensional optimization problem, which motivates the use of learning-based…
Intelligent reflecting surface (IRS) has the potential to significantly enhance the network performance by reconfiguring the wireless propagation environments. It is however difficult to obtain the accurate downlink channel state information (CSI) for efficient beamforming design in IRS-aided wireless networks. In this article, we consider an IRS-aided downlink multiple-input single-output (MISO) network, where the base station (BS) is not required to know the underlying channel distribution. We formulate an outage probability minimization problem by jointly optimizing the beamforming vector a…
In this letter, we study a rate-splitting multiple access (RSMA)-based intelligent reflecting surface (IRS)-aided multi-user multiple-input single-output (MISO) secure communication system with a potential eavesdropper (Eve). Aiming to maximize the minimum secrecy rate (SR) among all the legitimate users (LUs), a design problem for jointly optimizing the transmit beamforming with artificial noise (AN), the IRS beamforming, and the secrecy common rate allocation is formulated. Since the design problem is highly non-convex with coupled optimization variables, we develop a computationally efficie…
