We start by studying the subgroup structures underlying stabilizer circuits. Then we apply our results to provide two normal forms for stabilizer circuits. These forms are computed by induction using simple conjugation rules in the Clifford group and our algorithms do not rely on a special decomposition in the symplectic group. The first normal form has shape CX-CZ-P-Z-X-H-CZ-P-H, where CX (resp. CZ) denotes a layer of CNOT (resp. controlled-Z) gates, P a layer of phase gates, X (resp. Z) a layer of Pauli-X (resp. Pauli-Z) gates. Then we replace most of the controlled-Z gates by CNOT gates to obtain a second normal form of type P-CX-CZ-CX-Z-X-H-CZ-CX-P-H. In this second form, both controlled-Z layers have depth 1 and together contain therefore at most n controlled-Z gates. We also consider normal forms for stabilizer states and graph states. Finally we carry out a few tests on classical and quantum computers in order to show experimentally the utility of these normal forms to reduce the gate count of a stabilizer circuit.
Further improvements to stabilizer simulation theory: classical rewriting of CSS-preserving stabilizer circuits, quadratic form expansions of stabilizer operations, and framed hidden variable models
Steklov Mathematical Institute of Russian Academy of Sciences（俄罗斯科学院斯特克洛夫数学研究所）；Russian Quantum Center（俄罗斯量子中心）；Moscow Institute of Physics and Technology（莫斯科物理技术学院）；National University of Science and Technology “MISIS”（国立科技大学“米西斯”）
Understanding how a stabilizer circuit responds to different input is important to formulating an effective strategy for resource management. In this paper, we further investigate the many ways of using stabilizer operations to generate a single qubit output from a two-qubit state. In particular, by restricting the input to certain product states, we discover probabilistic operations capable of transforming stabilizer circuit outputs back into stabilizer circuit inputs. These secondary operations are ideally suited for recovery purposes and require only one extra resource ancilla to succeed. A…
We find a sufficient set of equations between quantum circuits from which we can derive any other equation between stabilizer quantum circuits. To establish this result, we rely upon existing work on the completeness of the graphical ZX language for quantum processes. The complexity of the circuit equations, as opposed to the very intuitive reading of the much smaller number of ZX-equations, advocates the latter for performing computations with quantum circuits.
Bravyi and Gosset recently gave classical simulation algorithms for quantum circuits dominated by Clifford operations. These algorithms scale exponentially with the number of T-gate in the circuit, but polynomially in the number of qubits and Clifford operations. Here we extend their algorithm to qudits of odd prime dimensions. We generalize their approximate stabilizer rank method for weak simulation to qudits and obtain the scaling of the approximate stabilizer rank with the number of single-qudit magic states. We also relate the canonical form of qudit stabilizer states to Gauss sum evaluat…
This paper presents ``Stim", a fast simulator for quantum stabilizer circuits. The paper explains how Stim works and compares it to existing tools. With no foreknowledge, Stim can analyze a distance 100 surface code circuit (20 thousand qubits, 8 million gates, 1 million measurements) in 15 seconds and then begin sampling full circuit shots at a rate of 1 kHz. Stim uses a stabilizer tableau representation, similar to Aaronson and Gottesman's CHP simulator, but with three main improvements. First, Stim improves the asymptotic complexity of deterministic measurement from quadratic to linear by t…
According to the Gottesman-Knill theorem, a class of quantum circuits, namely the so-called stabilizer circuits, can be simulated efficiently on a classical computer. We introduce a new algorithm for this task, which is based on the graph-state formalism. It shows significant improvement in comparison to an existing algorithm, given by Gottesman and Aaronson, in terms of speed and of the number of qubits the simulator can handle. We also present an implementation.
In this paper, we investigate how quantum architectures affect the efficiency of the execution of the quantum Fourier transform (QFT) and linear transformations, which are essential parts of the stabilizer/Clifford group circuits. In particular, we show that in most common and realistic physical architectures including the linear nearest neighbor, two-dimensional lattice, and bounded degree graph (containing a chain of length n), n-qubit QFT and n-qubit stabilizer circuits can be parallelized to linear depth using no auxiliary qubits. We construct lower bounds that show the efficiency of our a…
Quantum State Discrimination With Stabilizer Circuits
International Institute of Physics, Federal University of Rio Grande do Norte（国际物理研究所，北里奥格兰德联邦大学）；Departamento de Física Teórica e Experimental, Federal University of Rio Grande do Norte（理论与实验物理系，北里奥格兰德联邦大学）
We start by studying the subgroup structures underlying stabilizer circuits and we use our results to propose a new normal form for stabilizer circuits. This normal form is computed by induction using simple conjugation rules in the Clifford group. It has shape CX-CZ-P-H-CZ-P-H, where CX (resp. CZ) denotes a layer of $\cnot$ (resp. $\cz$) gates, P a layer of phase gates and H a layer of Hadamard gates. Then we consider a normal form for stabilizer states and we show how to reduce the two-qubit gate count in circuits implementing graph states. Finally we carry out a few numerical tests on class…
Recent work has explored using the stabilizer formalism to classically simulate quantum circuits containing a few non-Clifford gates. The computational cost of such methods is directly related to the notion of stabilizer rank, which for a pure state $ψ$ is defined to be the smallest integer $χ$ such that $ψ$ is a superposition of $χ$ stabilizer states. Here we develop a comprehensive mathematical theory of the stabilizer rank and the related approximate stabilizer rank. We also present a suite of classical simulation algorithms with broader applicability and significantly improved performance …
Improving the simulation of quantum circuits on classical computers is important for understanding quantum advantage and increasing development speed. In this paper, we explore a new way to express stabilizer states and further improve the speed of simulating stabilizer circuits with a current existing approach. First, we discover a unique and elegant canonical form for stabilizer states based on graph states to better represent stabilizer states and show how to efficiently simplify stabilizer states to canonical form. Second, we develop an improved algorithm for graph state stabilizer simulat…
We propose a randomized variant of the stabilizer rewiring algorithm (SRA), a method for constructing a transversal circuit mapping between any pair of stabilizer codes. As gates along this circuit are applied, the initial code is deformed through a series of intermediate codes before reaching the final code. With this randomized variant, we show that there always exists a path of deformations which preserves the code distance throughout the circuit, while using at most linear overhead in the distance. Furthermore, we show that a random path will almost always suffice, and discuss prospects fo…
A hybrid variational quantum circuit approach for stabilizer states classifiers
Laboratoire Interdisciplinaire Carnot de Bourgogne, UMR 6303 CNRS, University of Technology of Belfort-Montbéliard（贝尔福-蒙贝利亚尔技术大学）；Mathematics and Statistics Department, Auburn University（奥本大学）
Stabilizer codes form an important class of quantum error correcting codes which have an elegant theory, efficient error detection, and many known examples. Constructing stabilizer codes of length $n$ is equivalent to constructing subspaces of $\mathbb{F}_p^n \times \mathbb{F}_p^n$ which are "isotropic" under the symplectic bilinear form defined by $\left\langle (\mathbf{a},\mathbf{b}),(\mathbf{c},\mathbf{d}) \right\rangle = \mathbf{a}^{\mathrm{T}} \mathbf{d} - \mathbf{b}^{\mathrm{T}} \mathbf{c}$. As a result, many, but not all, ideas from the theory of classical error correction can be transl…
Verification of NISQ era quantum devices demands fast classical simulation of large noisy quantum circuits. We present an algorithm based on the stabilizer formalism that can efficiently simulate noisy stabilizer circuits. Additionally, the protocol can efficiently simulate a large set of multi-qubit mixed states that are not mixtures of stabilizer states. The existence of these 'bound states' was previously only known for odd-dimensional systems like qutrits. The algorithm also has the favorable property that circuits with depolarizing noise are simulated much faster than unitary circuits. Th…
MPStab: an hybrid stabilizers tensor-network quantum circuit simulator
University of Trieste（的里雅斯特大学）；Istituto Nazionale di Fisica Nucleare, Trieste Section（意大利国家核物理研究所的里雅斯特分部）；University of Helsinki（赫尔辛基大学）；European Organization for Nuclear Research (CERN)（欧洲核子研究组织（日内瓦））；Chalmers University of Technology（查尔姆斯理工大学）
SymFT: Universal Fault-Tolerant Quantum Circuit Simulation via Symbolic Clifford--Pauli Frames and Stabilizer Coordinates
University of Edinburgh（爱丁堡大学）；Arclight Quantum Computing Inc.（Arclight量子计算公司）；Institute of Computing Technology, Chinese Academy of Sciences（中国科学院计算技术研究所）
The Gottesman-Knill theorem says that a stabilizer circuit -- that is, a quantum circuit consisting solely of CNOT, Hadamard, and phase gates -- can be simulated efficiently on a classical computer. This paper improves that theorem in several directions. First, by removing the need for Gaussian elimination, we make the simulation algorithm much faster at the cost of a factor-2 increase in the number of bits needed to represent a state. We have implemented the improved algorithm in a freely-available program called CHP (CNOT-Hadamard-Phase), which can handle thousands of qubits easily. Second, …
We consider four-dimensional qudits as qubit pairs and their qudit Pauli operators as qubit Clifford operators. This introduces a nesting, $C_1^2 \subset C_2^4 \subset C_3^2$, where $C_n^m$ is the $n$th level of the $m$-dimensional qudit Clifford hierarchy. If we can convert between logical qubits and qudits, then qudit Clifford operators are qubit non-Clifford operators. Conversion is achieved by qubit fusion and qudit fission using stabilizer circuits that consume a resource state. This resource is a fused qubit stabilizer state with a fault-tolerant state preparation using stabilizer circui…
Given a quantum error correcting code, an important task is to find encoded operations that can be implemented efficiently and fault-tolerantly. In this Letter we focus on topological stabilizer codes and encoded unitary gates that can be implemented by a constant-depth quantum circuit. Such gates have a certain degree of protection since propagation of errors in a constant-depth circuit is limited by a constant size light cone. For the 2D geometry we show that constant-depth circuits can only implement a finite group of encoded gates known as the Clifford group. This implies that topological …
In 2008 Coecke and Duncan proposed the graphical ZX-calculus rewrite system which came to formalize reasoning with quantum circuits, measurements and quantum states. The ZX-calculus is sound for qubit quantum mechanics. Hence, equality of diagrams under ZX-equivalent transformations lifts to an equality of corresponding equations over matrices. Conversely, in 2014 Backens proved completeness, establishing that any derivation done in stabilizer quantum mechanics with matrices can be derived graphically using the ZX-calculus. A graphical rewrite system that is both confluent and also terminates …
We study approximate quantum low-density parity-check (QLDPC) codes, which are approximate quantum error-correcting codes specified as the ground space of a frustration-free local Hamiltonian, whose terms do not necessarily commute. Such codes generalize stabilizer QLDPC codes, which are exact quantum error-correcting codes with sparse, low-weight stabilizer generators (i.e. each stabilizer generator acts on a few qubits, and each qubit participates in a few stabilizer generators). Our investigation is motivated by an important question in Hamiltonian complexity and quantum coding theory: do s…
Clifford circuits play an important role in quantum computation. Gottesman and Chuang proposed a gate teleportation protocol so that a quantum circuit can be implemented by the teleportation circuit with specific ancillary qubits. In particular, an $n$-qubit Clifford circuit $U$ can be implemented by preparing an ancillary stabilizer state $(I\otimes U)|Φ^+\rangle^{\otimes n}$ for teleportation and doing a Pauli correction conditioned on the measurement. In this paper, we provide an alternative procedure to implement a Clifford circuit through Pauli measurements, by preparing $O(1)$ ancillas t…
We propose a framework to analyze linear optical circuits based on an analogy with stabilizer formalism in quantum circuits, which provides efficiently computable formulas related to state discriminations. Hence, we analyze a Bell-state discrimination scheme with linear optics and ancillary single photons. With an increasing number of ancilla photons, the success probability of Bell-state discrimination has a maximum of $\frac{403}{512} \simeq 0.787$ at $28$ ancilla photons. By contrast, the corresponding two-qubit measurement asymptotically approaches a maximally entangling measurement.
Generic quantum-circuit simulation appears intractable for conventional computers and may be unnecessary because useful quantum circuits exhibit significant structure that can be exploited during simulation. For example, Gottesman and Knill identified an important subclass, called stabilizer circuits, which can be simulated efficiently using group-theory techniques and insights from quantum physics. Realistic circuits enriched with quantum error-correcting codes and fault-tolerant procedures are dominated by stabilizer subcircuits and contain a relatively small number of non-Clifford component…
We propose a classical simulation method for quantum circuits based on decomposing unitary gates into a sum of stabilizer projectors. By only decomposing the non-Clifford gates, we take advantage of the Gottesman-Knill theorem and build a bridge between stabilizer-based simulation and Feynman-path-type simulation. We give two variants of this method: stabilizer-based path-integral recursion (SPIR) and stabilizer projector contraction (SPC). We also analyze further advantages and disadvantages of our method compared to the Bravyi-Gosset algorithm and recursive Feynman path-integral algorithms. …
Quantum error-correcting codes are used to protect qubits involved in quantum computation. This process requires logical operators, acting on protected qubits, to be translated into physical operators (circuits) acting on physical quantum states. We propose a mathematical framework for synthesizing physical circuits that implement logical Clifford operators for stabilizer codes. Circuit synthesis is enabled by representing the desired physical Clifford operator in $\mathbb{C}^{N \times N}$ as a partial $2m \times 2m$ binary symplectic matrix, where $N = 2^m$. We state and prove two theorems th…
In this paper we improve the layered implementation of arbitrary stabilizer circuits introduced by Aaronson and Gottesman in {\it Phys. Rev. A 70(052328)}, 2004. In particular, we reduce their 11-stage computation -H-C-P-C-P-C-H-P-C-P-C- into an 8-stage computation of the form -H-C-CZ-P-H-P-CZ-C-. We show arguments in support of using -CZ- stages over the -C- stages: not only the use of -CZ- stages allows a shorter layered expression, but -CZ- stages are simpler and appear to be easier to implement compared to the -C- stages. Relying on the 8-stage decomposition we develop a two-qubit depth-$(…
The real stabilizer fragment of quantum mechanics was shown to have a complete axiomatization in terms of the angle-free fragment of the ZX-calculus. This fragment of the ZX-calculus---although abstractly elegant---is stated in terms of identities, such as spider fusion which generally do not have interpretations as circuit transformations. We complete the category CNOT generated by the controlled not gate and the computational ancillary bits, presented by circuit relations, to the real stabilizer fragment of quantum mechanics. This is performed first, by adding the Hadamard gate and the scala…
The stabilizer formalism is a scheme, generalizing well-known techniques developed by Gottesman [quant-ph/9705052] in the case of qubits, to efficiently simulate a class of transformations ("stabilizer circuits", which include the quantum Fourier transform and highly entangling operations) on standard basis states of d-dimensional qudits. To determine the state of a simulated system, existing treatments involve the computation of cumulative phase factors which involve quadratic dependencies. We present a simple formalism in which Pauli operators are represented using displacement operators in …
Noise in quantum operations often negates the advantage of quantum computation. However, most classical simulations of quantum computers calculate the ideal probability amplitudes either storing full state vectors or using sophisticated tensor network contractions. Here, we investigate sampling-based classical simulation methods for noisy quantum circuits. Specifically, we characterize the simulation costs of two major schemes, stabilizer-state sampling of magic states and Heisenberg propagation, for quantum circuits being subject to stochastic Pauli noise, such as depolarizing and dephasing n…
We present novel algorithms to estimate outcomes for qubit quantum circuits. Notably, these methods can simulate a Clifford circuit in linear time without ever writing down stabilizer states explicitly. These algorithms outperform previous noisy near-Clifford techniques for most circuits. We identify a large class of input states that can be efficiently simulated despite not being stabilizer states. The algorithms leverage probability distributions constructed from Bloch vectors, paralleling previously known algorithms that use the discrete Wigner function for qutrits.
The highest information rate at which quantum error-correction schemes work reliably on a channel, which is called the quantum capacity, is proven to be lower bounded by the limit of the quantity termed coherent information maximized over the set of input density operators which are proportional to the projections onto the code spaces of symplectic stabilizer codes. Quantum channels to be considered are those subject to independent errors and modeled as tensor products of copies of a completely positive linear map on a Hilbert space of finite dimension, and the codes that are proven to have th…
