使用SOAR(轨道空气动力学研究卫星)进行的在轨空气动力系数测量
In-Orbit Aerodynamic Coefficient Measurements using SOAR (Satellite for Orbital Aerodynamics Research)
摘要:
轨道空气动力学研究卫星(SOAR)是一个立方体卫星任务,将于2021年发射,以研究不同材料之间的相互作用和极低地球轨道(VLEO)的大气流态。提高这些高度的气体表面相互作用的知识和识别的新材料,可以尽量减少阻力或改善空气动力控制的未来航天器的设计,可以在较低的高度轨道上运行是很重要的。这种卫星可能更小,开发成本更低,或者可以提供更好的地球观测数据或通信链路预算和延迟。利用精确的轨道和姿态确定信息以及测得的大气流动特性,可以研究卫星在轨道上所受到的力和力矩,并计算空气动力系数的估计值。本文介绍了SOAR任务的科学概念和设计。本文介绍了利用最小二乘轨道确定和自由参数拟合方法从测得的轨道、姿态和现场大气数据中恢复气动力系数的方法,并对所解气动力系数的实验不确定度进行了估计。结果表明,卫星设计和实验方法的结合能够清楚地显示出不同表面入射角下阻力和升力系数的变化。阻力系数测量的不确定性最低,约为300公里,而升力系数的测量随着轨道高度降低到200公里而有所改善。
英文摘要:
The Satellite for Orbital Aerodynamics Research (SOAR) is a CubeSat mission, due to be launched in 2021, to investigate the interaction between different materials and the atmospheric flow regime in very low Earth orbits (VLEO). Improving knowledge of the gas-surface interactions at these altitudes and identification of novel materials that can minimise drag or improve aerodynamic control are important for the design of future spacecraft that can operate in lower altitude orbits. Such satellites may be smaller and cheaper to develop or can provide improved Earth observation data or communications link-budgets and latency. Using precise orbit and attitude determination information and the measured atmospheric flow characteristics the forces and torques experienced by the satellite in orbit can be studied and estimates of the aerodynamic coefficients calculated. This paper presents the scientific concept and design of the SOAR mission. The methodology for recovery of the aerodynamic coefficients from the measured orbit, attitude, and in-situ atmospheric data using a least-squares orbit determination and free-parameter fitting process is described and the experimental uncertainty of the resolved aerodynamic coefficients is estimated. The presented results indicate that the combination of the satellite design and experimental methodology are capable of clearly illustrating the variation of drag and lift coefficient for differing surface incidence angle. The lowest uncertainties for the drag coefficient measurement are found at approximately 300 km, whilst the measurement of lift coefficient improves for reducing orbital altitude to 200 km.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。