The performance is presented of the reconstruction and identification algorithms for electrons and photons with the CMS experiment at the LHC. The reported results are based on proton-proton collision data collected at a center-of-mass energy of 13 TeV and recorded in 2016-2018, corresponding to an integrated luminosity of 136 fb$^{-1}$. Results obtained from lead-lead collision data collected at $\sqrt{s_\mathrm{NN}} =$ 5.02 TeV are also presented. Innovative techniques are used to reconstruct the electron and photon signals in the detector and to optimize the energy resolution. Events with electrons and photons in the final state are used to measure the energy resolution and energy scale uncertainty in the recorded events. The measured energy resolution for electrons produced in Z boson decays in proton-proton collision data ranges from 2 to 5%, depending on electron pseudorapidity and energy loss through bremsstrahlung in the detector material. The energy scale in the same range of energies is measured with an uncertainty smaller than 0.1 (0.3)% in the barrel (endcap) region in proton-proton collisions and better than 1 (3)% in the barrel (endcap) region in heavy ion collisions. The timing resolution for electrons from Z boson decays with the full 2016-2018 proton-proton collision data set is measured to be 200 ps.
The Compact Muon Solenoid (CMS) is a large and complex general purpose experiment at the CERN Large Hadron Collider (LHC), built and maintained by many collaborators from around the world. Efficient operation of the detector requires widespread and timely access to a broad range of monitoring and status information. To this end the Web Based Monitoring (WBM) system was developed to present data to users located anywhere from many underlying heterogeneous sources, from real time messaging systems to relational databases. This system provides the power to combine and correlate data in both graph…
The CMS detector at the LHC is in the final stages of preparation. The high resolution Electromagnetic Calorimeter, which consists of nearly 76000 lead tungstate crystals, will play a crucial role in the coming physics searches undertaken by CMS. The design, status, and initial performance of the calorimeter, in test beams and with cosmic rays, will be reviewed.
The Resistive Plate Chambers (RPCs) are employed in the CMS experiment at the LHC as dedicated trigger system both in the barrel and in the endcap. This note presents results of the radiation background measurements performed with the 2011 and 2012 proton-proton collision data collected by CMS. Emphasis is given to the measurements of the background distribution inside the RPCs. The expected background rates during the future running of the LHC are estimated both from extrapolated measurements and from simulation.
While the CMS experiment is currently harvesting LHC collision data at CERN, the performance of its electromagnetic calorimeter (ECAL) is being constantly monitored, and work has started to assess the need for changes to the detector to ensure an adequate performance for High-Luminosity LHC (HL-LHC) running, which is planned for 2022 and beyond. In this paper, results from CMS running, beam tests and laboratory measurements are combined to anticipate the detector performance evolution at the HL-LHC. Further, various R&D studies are illustrated, that will provide a useful choice for electromagn…
The CMS collaboration used the past year to greatly improve the level of detector readiness for the first collisions data. The acquired operational experience over this year, large gains in understanding the detector and improved preparedness for early physics will be instrumental in minimizing the time from the first collisions to first LHC physics. The following describes the status of the CMS experiment and outlines early physics plans with the first LHC data.
The electronics of the CMS Drift Tube (DT) chambers need to be replaced during Long Shutdown 3 to tolerate the High Luminosity LHC (HL-LHC) data taking conditions. The first DT prototypes of the HL-LHC electronics, the on-detector board (OBDT), have been installed in the DT chambers of one sector, out of 60 sectors, and integrated into the central data acquisition and trigger systems. The signals from the chambers are split and reach both the legacy and Phase-2 demonstrator chains, which will allow them to operate in parallel during LHC collisions.
The Level-1 trigger of the CMS experiment at CERN has been designed to select proton-proton interactions whose final state includes signatures of new physics in the form of high transverse energy electrons, photons, jets, or high missing transverse energy. The Level-1 trigger system process data in a pipeline fashion at a rate of 40 MHz, has a design latency of 128 bunch crossings and an output rate of 100 KHz. The design of this system is presented with emphasis on the calorimeter triggers. After a long period of testing and validation of its performance the Level-1 trigger system has been in…
With the planned addition of tracking information to the Compact Muon Solenoid (CMS) Level-1 trigger for the High-Luminosity Large Hadron Collider (HL-LHC), the trigger algorithms can be completely reconceptualized. We explore the feasibility of using particle flow-like reconstruction and pileup per particle identification (PUPPI) pileup mitigation at the hardware trigger level. This represents a new type of multi-subdetector pattern recognition challenge for the HL-LHC. We present proof-of-principle studies on both physics and hardware-resource performance of a prototype algorithm for use by …
The muon spectrometer of the CMS (Compact Muon Solenoid) experiment at the Large Hadron Collider (LHC) is equipped with a redundant system made of Resistive Plate Chambers and Drift Tube in barrel and RPC and Cathode Strip Chamber in endcap region. In this paper, the operations and performance of the RPC system during the first three years of LHC activity will be reported. The stability of RPC performance, such as efficiency, cluster size and noise, will be reported. Finally, the radiation background levels on the RPC system have been measured as a function of the LHC luminosity. Extrapolation…
The Resistive Plate Chambers detector system at the CMS experiment at the LHC provides robustness and redundancy to the muon trigger. A total of 1056 double-gap chambers cover the pseudo-rapidity region < 1.6. The main detector parameters and environmental conditions are constantly and closely monitored to achieve operational stability and high quality data in the harsh conditions of the second run period of the LHC with center-of-mass energy of 13 TeV. First results of overall detector stability with 2015 data and comparisons with data from the LHC RUN-1 period at 8 TeV are presented.
High-Luminosity running at the LHC, which is planned for 2022 and beyond, will imply an order of magnitude increase in radiation levels and particle fluences with respect to the present LHC running conditions. The performance evolution of the CMS electromagnetic calorimeter (ECAL), comprising 75,848 scintillating lead tungstate crystals, indicates that an upgrade of its endcaps will be needed for HL-LHC running, to ensure an adequate performance. Results from LHC collision periods, beam tests and laboratory measurements of proton-irradiated crystals are combined to predict the performance of t…
The CMS inner pixel detector system is planned to be replaced during the first phase of the LHC luminosity upgrade. The plans foresee an ultra low mass system with four barrel layers and three disks on either end. With the expected increase in particle rates, the electronic readout chain will be changed for fast digital signals. An overview of the envisaged design options for the upgraded CMS pixel detector is given, as well as estimates of the tracking and vertexing performance.
The second LHC long shutdown period (LS2) is an important opportunity for the CMS Resistive Plate Chambers (RPC) to complete their consolidation and upgrade projects. The consolidation includes detector maintenance for gas tightness, HV (high voltage), LV (low voltage) and slow control operation. All services for the RPC Phase-2 upgrade, namely RE3/1 and RE4/1, were anticipated for installation to LS2. This paper summarises the RPC system maintenance and upgrade activities.
The CMS Resistive Plate Chamber (RPC) system has been certified for 10 years of LHC operation. In the next years, during the High luminosity LHC (HL-LHC) phase, the LHC instantaneous luminosity will increase to a factor five more than the existing LHC luminosity. This will subject the present CMS RPC system to background rates and operating conditions much higher with respect to those for which the detectors have been designed. Those conditions could affect the detector properties and introduce nonrecoverable aging effects. A dedicated longevity test is set up in the CERN Gamma Irradiation Fac…
The LHC machine is planning an upgrade program, which will smoothly bring the instantaneous luminosity to about $5-7.5\times10^{34}~\mathrm{cm}^{-2}\mathrm{s}^{-1}$ in 2028, to possibly reach an integrated luminosity of 3000-4500 fb$^{-1}$ by the end of 2039. This High-Luminosity LHC scenario, HL-LHC, will require a preparation program of the LHC detectors known as Phase-2 upgrade. The current CMS Outer Tracker, already running beyond design specifications, and the recently installed CMS Phase-1 Pixel Detector will not be able to survive the HL-LHC radiation conditions. Thus, CMS will need com…
At the High Luminosity LHC (HL-LHC), the CMS experiment will face a harsh environment with a high instantaneous luminosity up to 7x10$^{34}$/cm$^2$/s corresponding to an average of 140-200 multiple proton-proton collisions per bunch crossing. The main goal of the CMS Level 1 (L1) trigger upgrade for the HL-LHC is to maintain trigger thresholds that are as low as possible and comparable to those currently in use at the LHC, and to possibly include new triggers that were not feasible at the LHC. This will be achieved by upgrading the detector readout electronics, to allow a much larger L1 trigge…
The 2009 run provided the first proton-proton collisions from the Large Hadron Collider (LHC) at center of mass energies of 900 GeV and 2.36 TeV. The Compact Muon Solenoid (CMS) experiment has recorded a large sample of minimum bias events from these collisions. We present results from the all silicon tracking detectors from this run. The performance of the tracker and track reconstruction algorithms are considered including signal-to-noise, efficiencies and comparisons to simulation for track parameter and resonance reconstruction performance.
The strategies for and the performance of the CMS tracker alignment during the 2021-2022 LHC commissioning preceding the Run 3 data-taking period are described. The results of the very first tracker alignment after the pixel reinstallation, performed with cosmic ray muons recorded with the solenoid magnet off are presented. Also, the performance of the first alignment of the commissioning period with collision data events, collected at center-of-mass energy of 900 GeV, is presented. Finally, the tracker alignment effort during the final countdown to LHC Run 3 is discussed.
The CMS experiment collected around 150 fb$^{-1}$ of proton-proton collision data at $\sqrt{s}$ = 13 TeV during the Run-2 data taking period of LHC. The CMS RPC system provided redundant information for robust muon triggering, reconstruction and identification. To ensure stable data taking, the CMS RPC collaboration has performed detector operation, calibration and performance studies. After the end of Run-2, it was started the second LHC long shutdown period (LS2), an important opportunity for maintenance and preparation for the next data taking period (Run-3) and the installation of services…
We discuss a CMS eXtension for Studying Energetic Neutrinos (CMS-XSEN). Neutrinos at the LHC are abundant and have unique features: their energies reach out to the TeV range, and the contribution of the τ flavour is sizeable. The measurement of their interaction cross sections has much physics potential. The pseudorapity range 4<|η|<5 is of particular interest since leptonic W decays provide an additional contribution to the neutrino flux from b and c production. A modest detector of 4.1x$10^{27}$ nucleons/cm$^{2}$, placed in the LHC tunnel, 25 m from the interaction point, around the focusing…
The CMS experiment, located at the Large Hadron Collider (LHC) in CERN, has a redundant muon system composed by three different gaseous detector technologies: Cathode Strip Chambers (in the forward regions), Drift Tubes (in the central region), and Resistive Plate Chambers (both its central and forward regions). All three are used for muon reconstruction and triggering. The CMS RPC system confers robustness and redundancy to the muon trigger. The RPC system operation in the challenging background and pileup conditions of the LHC environment is presented. The RPC system provides information to …
A wealth of physics results have already been obtained from the LHC, due to the excellent performance of the collider and its experiments. Even more results are expected to be achievable in the phase of the high-luminosity LHC (HL-LHC). It is foreseen to deliver a ten times higher LHC design luminosity resulting in about 4000 fb-1 within ten years of operation. The upgrade of the LHC is driven by the prospect to observe and measure rare processes. High particle production rates and radiation doses result in a challenging environment for the collider experiments. The ATLAS and CMS experiments a…
The first LHC pp collisions at centre-of-mass energies of 0.9 and 2.36 TeV were recorded by the CMS detector in December 2009. The trajectories of charged particles produced in the collisions were reconstructed using the all-silicon Tracker and their momenta were measured in the 3.8 T axial magnetic field. Results from the Tracker commissioning are presented including studies of timing, efficiency, signal-to-noise, resolution, and ionization energy. Reconstructed tracks are used to benchmark the performance in terms of track and vertex resolutions, reconstruction of decays, estimation of ioniz…
The strategies for and the performance of the CMS silicon tracking system alignment during the 2015-2018 data-taking period of the LHC are described. The alignment procedures during and after data taking are explained. Alignment scenarios are also derived for use in the simulation of the detector response. Systematic effects, related to intrinsic symmetries of the alignment task or to external constraints, are discussed and illustrated for different scenarios.
The Compact Muon Solenoid (CMS) is one of two general-purpose detectors that reconstruct the products of high energy particle interactions at the Large Hadron Collider at CERN. The silicon pixel detector is the innermost component of the CMS tracking system. It determines the trajectories of charged particles originating from the interaction region with high resolution enabling precise momentum and impact parameter measurements in the tracker. It is designed to operate in the high particle density environment of the LHC. The calibration of the pixel detector plays an important role in its perf…
The CMS electromagnetic calorimeter (ECAL) is a high-resolution, hermetic, and homogeneous calorimeter made of 75,848 scintillating lead tungstate crystals. Following the discovery of the Higgs boson, the CMS ECAL is at the forefront of precision measurements and the search for new physics in data from the LHC, which recently began producing collisions at the unprecedented energy of 13 TeV. The exceptional precision of the CMS ECAL, as well as its timing performance, are invaluable tools for the discovery of new physics at the LHC Run 2. The excellent performance of the ECAL relies on precise …
As part of the Phase II upgrade program, the Compact Muon Solenoid (CMS) detector will incorporate a new timing layer designed to measure minimum ionizing particles (MIPs) with a time resolution of $\sim$30 ps. Precision timing will mitigate the impact of the challenging levels of pileup expected at the High Luminosity LHC. The time information assigned to each track will enable the use of 4D-vertexing which will render a 5-fold pile-up reduction, thus recovering the current conditions. Precision timing will also enable new time-based isolations and improved $b$-tagging algorithms. All of this…
National Research University - Higher School of Economics（国立研究大学高等经济学院）；Yandex School of Data Analysis（Yandex数据分析学院）
Daily operation of a large-scale experiment is a challenging task, particularly from perspectives of routine monitoring of quality for data being taken. We describe an approach that uses Machine Learning for the automated system to monitor data quality, which is based on partial use of data qualified manually by detector experts. The system automatically classifies marginal cases: both of good an bad data, and use human expert decision to classify remaining "grey area" cases. This study uses collision data collected by the CMS experiment at LHC in 2010. We demonstrate that proposed workflow is…
The central component of the CMS detector is the largest silicon tracker ever built. The precise alignment of this complex device is a formidable challenge, and only achievable with a significant extension of the technologies routinely used for tracking detectors in the past. This article describes the full-scale alignment procedure as it is used during LHC operations. Among the specific features of the method are the simultaneous determination of up to 200,000 alignment parameters with tracks, the measurement of individual sensor curvature parameters, the control of systematic misalignment ef…
The Compact Muon Solenoid (CMS) Experiment is a general purpose particle detector experiment located at the Large Hadron Collider (LHC) at CERN. In 2008, the LHC beam was commissioned and successfully steered through the CMS detector. First results from CMS with beam data are described, focusing on detector commissioning with beam data, from beam halo studies with the endcap muon system to displays of "beam splash" events, in which the proton beam was stopped by an upstream collimator.
I discuss the program of work towards discoveries at the LHC, and I include seeds for orientation and navigation in the parameter space given the foreseen multitude of excesses at startup.
This paper describes latest results on lepton (electron, muon and tau) and photon particle identification at the ATLAS and CMS experiments, with emphasis on how the particle identification can be validated and its performance determined using early LHC data.
Charm physics has been established at the LHC based on several high-precision measurements. The future of charm physics at the LHC experiments is discussed in detail. The bulk of the charm physics programme will be performed by LHCb and the LHCb upgrade. In particular, the impact of the LHCb upgrade on mixing and \CP violation measurements is presented.
This paper reports on the commissioning and first running experience of the CMS Zero Degree Calorimeters during December 2009. All channels worked correctly. The ZDCs were timed into the data acquisition system using beam splash events. These data also allowed us to make a first estimate of channel-by-channel variations in gain.
A brief review of the discovery potential of the ATLAS and CMS experiments to search for signals from extra dimensions in different luminosity scenarios is given.
We summarize the results of several searches for evidence of new physics phenomena using proton-proton collisions at 7 TeV delivered by the Large Hadron Collider at CERN and recorded by the CMS detector in 2011.
Multifractal analysis was performed on $pp$ collision data at $\sqrt{s}=$ 0.9, 7 and 8 TeV from the CMS experiment at CERN. The data was obtained and processed from the CERN Open Data Portal. Vertical analysis was used to compute the generalised dimensions $D_q$ and the multifractal spectra $f(α)$ of the data, which reveals the level of complexity of its pseudorapidity distribution. It was found that the $f(α)$ curves widen with increasing collision energy, signalling an increase in branching complexity.
A means for non-invasive measurement of transverse and longitudinal characteristics of bunched beams in synchrotrons has been developed based on high sensitivity slotted waveguide pickups. The pickups allow for bandwidths exceeding hundreds of MHz while maintaining good beam sensitivity characteristics. Wide bandwidth is essential to allow bunch-by-bunch measurements by means of a fast gate. The Schottky detector system is installed and successfully commissioned in the Fermilab Tevatron, Recycler and CERN LHC synchrotrons. Measurement capabilities include tune, chromaticity, and momentum sprea…
Natural SUSY suggests the existence of light stop quarks, accessible at the LHC, which are the focus of a dedicated CMS search program. I present two inclusive CMS searches that look for TeV scale colored sparticles in final states with jets, b-tagged jets and missing transverse energy performed using up to 19.4fb-1 of 8TeV LHC proton-proton data. No deviation from the Standard Model was observed in these searches, and the implications for this was shown for several simplified model scenarios and phenomenological MSSM.
Selected results of searches for neutral long-lived particles with displaced and delayed jets, trackless jets and emerging jets, as well as displaced muons, obtained with data recorded at a centre-of-mass energy of 13 TeV by the ATLAS and CMS Collaborations during LHC's Run 2 are presented, as well as challenges and techniques.
I discuss a method to model the instrumental response of the CMS and ATLAS detectors at high transverse missing energies to dominant standard model V+jets backgrounds, where V is a Z, gamma or W, using multi-jet QCD events. The method is developed for new physics searches in early data at the Large Hadron Collider (LHC) with minimal recourse to simulation.
A brief summary of the CMS discovery potential for the Standard Model Higgs boson in the H->gamma+gamma channel is presented. We review both a standard cut-based search and a more optimized analysis that takes advantage of the wide range of signal/background expectations as function of the possible selection cuts. As the Higgs discovery in this channel will rely heavily on performance of the CMS electromagnetic calorimeter, the relevant aspects of its design and operation in situ at the LHC are also briefly discussed.
Photon bremsstrahlung is studied for identifying elastic proton-proton interactions in the CMS experiment at the LHC. In addition to measurement of the elastic pp cross section (assuming that the elastic slope is known) the bremsstrahlung photons will allow evaluation of the total pp cross section, luminosity and alignment of the Zero Degree Calorimeters (ZDCs).
The physics reach of the CMS detector achievable with 300(0) inverse femtobarns of proton-proton collisions recorded at sqrt(s)=14 TeV is presented. Ultimate precision on measurements of Higgs boson properties, top quark physics, and electroweak processes are discussed, as well as the discovery potential for new particles beyond the standard model. In addition, the potential for future heavy ion physics is presented. This document has been submitted as a white paper to the Snowmass process, an exercise initiated by the American Physical Society's Division of Particles and Fields to assess the …
Physical possibility for bending the LHC protons (or ions) a huge angle of 1-20 degrees in the energy range of 0.45 to 7 TeV by means of a bent channeling crystal of Silicon or Germanium is demonstrated. Such an application can be useful for calibration of CMS (or ATLAS) calorimeters in situ by the LHC beam of precisely known energy. We show by simulations that such an application would be feasible at the LHC, and report the experience of IHEP Protvino in bending 70 GeV protons by 9 degrees (150 mrad) during 10 years in 1994-2004 experiments.
We report on the status and history of the CMS commissioning, together with selected results from cosmic-ray muon data. The second part focuses on strategies for optimizing the reconstruction of jets, missing transverse energy and photons for early standard model measurements at ATLAS and CMS with the first collision data from the Large Hadron Collider at CERN.
Measurements of the top quark mass are presented, obtained from CMS data collected in proton proton collisions at the LHC at centre-of-mass energies of 7 TeV and 8 TeV. The mass of the top quark is measured using several methods and channels, including the reconstructed invariant mass distribution of the top quark as well as measurements based on charged particle information. The dependence of the mass measurement on the kinematic phase space is investigated. The results of the various channels are combined and compared to the world average. The top mass is extracted from the inclusive top qua…
In January 2007 the CERN director general announced the plan for the staged upgrade of the LHC luminosity. The plan foresees a phase 1 upgrade reaching a peak luminosity of $3 \times 10^{34}$ cm$^{-2}$s$^{-1}$ followed by phase reaching up to $ 10^{35}$ cm$^{-2}$s$^{-1}$. We discuss the physics potential and the experimental challenges of an upgraded LHC running. The detector R&D needed to operate ATLAS and CMS in a very high radiation environment and the expected detector performance are also discussed.
Forward physics with CMS at the LHC covers a wide range of physics subjects, including very low-x QCD, underlying event and multiple interactions characteristics, gamma-mediated processes, shower development at the energy scale of primary cosmic ray interactions with the atmosphere, diffraction in the presence of a hard scale and even MSSM Higgs discovery in central exclusive production. We describe the forward detector instrumentation around the CMS interaction point and present selected feasibility studies to illustrate their physics potential.
This note presents selected measurements of W and Z boson production, carried out with the CMS experiment at the LHC, based on samples of events collected during 2015-2018 physics runs. W boson events were selected containing an isolated, energetic electron or muon, while Z boson events were selected containing a pair of isolated, energetic electrons or muons. Presented results include searches for rare decays of W bosons to pions.
We present an overview of measurements of electroweak vector boson pair production and anomalous Triple Gauge Couplings (aTGC), with semileptonic and fully leptonic final states. The data analyzed were taken at center of mass energy of 7 & 8 TeV by the CMS detector at the Large Hadron Collider. The cross-section measurements are important because they are test of the Standard Model predictions, while these processes serve as background for Higgs searches and various other processes.
The measurement of the inclusive cross section for Wgamma production is presented based on 36/ pb of data acquired with the CMS detector from 7 TeV LHC collisions in 2010. Comparisons are made with the predictions of the standard model. The W bosons are identified through their leptonic decays to electrons and muons. The Wgamma cross section is sensitive to anomalous triple-gauge couplings and hence this measurement probes physics beyond the standard model.
