Modulating electronic structure of monolayer transition metal dichalcogenides (TMDCs) is important for many applications and doping is an effective way towards this goal, yet is challenging to control. Here we report the in-situ substitutional doping of niobium (Nb) into TMDCs with tunable concentrations during chemical vapour deposition. Taking monolayer WS2 as an example, doping Nb into its lattice leads to bandgap changes in the range 1.98 eV to 1.65 eV. Noteworthy, electrical transport measurements and density functional theory calculations show that the 4d electron orbitals of the Nb dopants contribute to the density of states of Nb-doped WS2 around the Fermi level, resulting in an n to p-type conversion. Nb-doping also reduces the energy barrier of hydrogen absorption in WS2, leading to an improved electrocatalytic hydrogen evolution performance. These results highlight the effectiveness of controlled doping in modulating the electronic structure of TMDCs and their use in electronic related applications.
Two-dimensional (2D) transition metal dichalcogenides (TMDs) have recently emerged as promising candidates for future electronics and optoelectronics. While most of TMDs are intrinsic n-type semiconductors due to electron donating which originates from chalcogen vacancies, obtaining intrinsic high-quality p-type semiconducting TMDs has been challenging. Here, we report an experimental approach to obtain intrinsic p-type Tungsten (W)-based TMDs by substitutional Ta-doping. The obtained few-layer Ta-doped WSe2 (Ta0.01W0.99Se2) field-effect transistor (FET) devices exhibit competitive p-type perf…
Chalcogen vacancies are considered to be the most abundant point defects in two-dimensional (2D) transition-metal dichalcogenide (TMD) semiconductors, and predicted to result in deep in-gap states (IGS). As a result, important features in the optical response of 2D-TMDs have typically been attributed to chalcogen vacancies, with indirect support from Transmission Electron Microscopy (TEM) and Scanning Tunneling Microscopy (STM) images. However, TEM imaging measurements do not provide direct access to the electronic structure of individual defects; and while Scanning Tunneling Spectroscopy (STS…
Quantum localization via atomic point defects in semiconductors is of significant fundamental and technological importance. Quantum defects in monolayer transition-metal dichalcogenide semiconductors have been proposed as stable and scalable optically-addressable spin qubits. Yet, the impact of strong spin-orbit coupling on their dynamical response, for example under optical excitation, has remained elusive. In this context, we study the effect of spin-orbit coupling on the electron-phonon interaction in a single chalcogen vacancy defect in monolayer transition metal dichalcogenides, molybdenu…
Among transition metal dichalcogenides (TMdCs) as alternatives for Pt-based catalysts, metallic-TMdCs catalysts have highly reactive basal-plane but are unstable. Meanwhile, chemically stable semiconducting-TMdCs show limiting catalytic activity due to their inactive basal-plane. Here, we propose metallic vanadium sulfide (VSn) nanodispersed in a semiconducting MoS2 film (V-MoS2) as an efficient catalyst. During synthesis, vanadium atoms are substituted into hexagonal monolayer MoS2 to form randomly distributed VSn units. The V-MoS2 film on a Cu electrode exhibits Pt-scalable catalytic perform…
Successful doping of single-layer transition metal dichalcogenides (TMDs) remains a formidable barrier to their incorporation into a range of technologies. We use density functional theory to study doping of molybdenum and tungsten dichalcogenides with a large fraction of the periodic table. An automated analysis of the energetics, atomic and electronic structure of thousands of calculations results in insightful trends across the periodic table and points out promising dopants to be pursued experimentally. Beyond previously studied cases, our predictions suggest promising substitutional dopan…
Common substitutional isovalent semiconductor alloys usually form disordered metastable phases with positive excess formation enthalpies (ΔH). In contrast, monolayer alloys of transition metal dichalcogenides (TMDs) MX2 (M = Mo, W; X = S, Se) always have negative ΔH, suggesting atomic ordering, which is, however, not yet experimentally observed. Using first-principles calculations, we find that the negative ΔH of cation-mixed TMD alloys results from the charge transfer from weak Mo-X to nearest strong W-X bonds and the negative ΔH of anion-mixed TMD alloys comes from the larger energy gain due…
Scalable substitutional doping of two-dimensional (2D) transition metal dichalcogenides (TMDCs) is a prerequisite to developing next-generation logic and memory devices based on 2D materials. To date, doping efforts are still nascent. Here, we report scalable growth and vanadium (V) doping of 2D WSe2 at front-end-of-line (FEOL) and back-end-of-line (BEOL) compatible temperatures of 800 °C and 400 °C, respectively. A combination of experimental and theoretical studies confirm that vanadium atoms substitutionally replace tungsten in WSe2, which results in p-type doping via the introduction of di…
Two-dimensional (2D) materials and Transition Metal Dichalcogenides (TMD) in particular are at the forefront of nanotechnology. To tailor properties for engineering applications, alloying strategies used for bulk metals in the last century need to be extended to this novel class of materials. Here we present a systematic analysis of the phase behaviour of substitutional 2D alloys in the TMD family on both the metal and chalcogenide site. The phase behaviour is quantified in terms of a metastability metric and benchmarked against systematic computational screening of configurational energy land…
Using a multiscale computational approach, we probe the origin and evolution of ultraflatbands in moiré superlattices of twisted bilayer MoS$_2$, a prototypical transition metal dichalcogenide. Unlike twisted bilayer graphene, we find no unique magic angles in twisted bilayer MoS$_2$ for flatband formation. Ultraflatbands form at the valence band edge for twist angles ($θ$) close to 0$^\circ$ and at both the valence and conduction band edges for $θ$ close to 60$^\circ$, and have distinct origins. For$ θ$ close to 0$^\circ$, inhomogeneous hybridization in the reconstructed moiré superlattice is…
The 1T_prime phase of transition metal dichalcogenides (TMDs) is a low symmetry charge density wave (CDW) phase, which can be regarded as a periodically distorted structure (Peierls distortion) of the high symmetry 1T phase. In this paper, using density functional theory (DFT) calculations, we report that the positive charge (hole) injection is an effective method to modulate the Peierls distortion of MoS2 1T_prime for new CDW phase and superior electromechanical properties. A new stable CDW phase is discovered at hole doping level of ~ 0.10h+/atom, named as 1Tt_prime. The hole charging and di…
Substitutionally-doped 2D transition metal dichalcogenides are primed for next-generation device applications such as field effect transistors (FET), sensors, and optoelectronic circuits. In this work, we demonstrate substitutional Rhenium (Re) doping of MoS2 monolayers with controllable concentrations down to 500 parts-per-million (ppm) by metal-organic chemical vapor deposition (MOCVD). Surprisingly, we discover that even trace amounts of Re lead to a reduction in sulfur site defect density by 5-10x. Ab initio models indicate the free-energy of sulfur-vacancy formation is increased along the…
Nonreciprocity and nonreciprocal optical devices play a vital role in modern photonic technologies by enforcing one-way propagation of light. Most nonreciprocal devices today are made from a special class of low-loss ferrites that exhibit a magneto-optical response in the presence of an external static magnetic field. While breaking transmission symmetry, ferrites fail to satisfy the need for miniaturization of photonic circuitry due to weak character of nonreciprocal responses at optical wavelengths and are not easy to integrate into on-chip photonic systems. These challenges led to the emerg…
High pressure is a proven effective tool for modulating inter-layer interactions in semiconducting transition metal dichalcogenides, which leads to significant band structure changes. Here, we present an extended infrared study of the pressure-induced semiconductor-to-metal transition in 2H-MoTe2, which reveals that the metallization process at 13-15 GPa is not associated with the indirect band gap closure, occuring at 24 GPa. A coherent picture is drawn where n-type doping levels just below the conduction band minimum play a crucial role in the early metallization transition. Doping levels ar…
Monolayers of transition metal dichalcogenides (TMdC) are promising candidates for realization of a new generation of optoelectronic devices. The optical properties of these two-dimensional materials, however, vary from flake to flake, or even across individual flakes, and change over time, all of which makes control of the optoelectronic properties challenging. There are many different perturbations that can alter the optical properties, including charge doping, defects, strain, oxidation, and water intercalation. Identifying which perturbations are present is usually not straightforward and …
While n-type semiconductor behavior appears to be more common in as-prepared two-dimensional (2D) transition metal dichalcogenides (TMDCs), substitutional doping with acceptor atoms is typically required to tune the conductivity to p-type in order to facilitate their potential application in different devices. Here, we report a systematic study on the equivalent electrical "doping" effect of - single sulfur vacancies (V1S) in monolayer WS2 and MoS2 by studying the interface interaction of WS2-Au and MoS2-Au contacts. Based on our first principles calculations, we found that the V1S can signifi…
Selenization of V$_2$O$_5$/WO$_3$ Bilayers for Tuned Optoelectronic Response of WSe$_2$ Films
Morgan State University（摩根州立大学）；DOD Center of Excellence for Advanced Electro-Photonics with 2D Materials, Morgan State University（二维材料先进电光子学国防部卓越中心，摩根州立大学）；DEVCOM Army Research Laboratory（美国陆军研究实验室）
