Optical colonoscopy is an essential diagnostic and prognostic tool for many gastrointestinal diseases, including cancer screening and staging, intestinal bleeding, diarrhea, abdominal symptom evaluation, and inflammatory bowel disease assessment. Automated assessment of colonoscopy is of interest considering the subjectivity present in qualitative human interpretations of colonoscopy findings. Localization of the camera is essential to interpreting the meaning and context of findings for diseases evaluated by colonoscopy. In this study, we propose a camera localization system to estimate the relative location of the camera and classify the colon into anatomical segments. The camera localization system begins with non-informative frame detection and removal. Then a self-training end-to-end convolutional neural network is built to estimate the camera motion, where several strategies are proposed to improve its robustness and generalization on endoscopic videos. Using the estimated camera motion a camera trajectory can be derived and a relative location index calculated. Based on the estimated location index, anatomical colon segment classification is performed by constructing a colon template. The proposed motion estimation algorithm was evaluated on an external dataset containing the ground truth for camera pose. The experimental results show that the performance of the proposed method is superior to other published methods. The relative location index estimation and anatomical region classification were further validated using colonoscopy videos collected from routine clinical practice. This validation yielded an average accuracy in classification of 0.754, which is substantially higher than the performances obtained using location indices built from other methods.
WSPolypNet: Weakly Supervised Polyp Localization in Colonoscopy Videos
Soonchunhyang University（顺天乡大学）；Seoul National University（首尔大学）；Kyungpook National University（庆北国立大学）；OUTTA；Chung-Ang University（中央大学）；Samsung Changwon Hospital（三星昌原医院）；NVIDIA AI Technology Center（英伟达人工智能技术中心）
SimulaMet；UiT The Arctic University of Norway（挪威北极大学）；University of Oxford（牛津大学）；Oxford NIHR Biomedical Research Centre（牛津NIHR生物医学研究中心）；Oslo Metropolitan University（奥斯陆城市大学）
Computer-aided detection, localisation, and segmentation methods can help improve colonoscopy procedures. Even though many methods have been built to tackle automatic detection and segmentation of polyps, benchmarking of state-of-the-art methods still remains an open problem. This is due to the increasing number of researched computer vision methods that can be applied to polyp datasets. Benchmarking of novel methods can provide a direction to the development of automated polyp detection and segmentation tasks. Furthermore, it ensures that the produced results in the community are reproducible…
Southern University of Science and Technology（南方科技大学）；The Chinese University of Hong Kong（香港中文大学）；Air Force Medical Center, PLA（中国人民解放军空军特色医学中心）
Colonoscopy is a standard imaging tool for visualizing the entire gastrointestinal (GI) tract of patients to capture lesion areas. However, it takes the clinicians excessive time to review a large number of images extracted from colonoscopy videos. Thus, automatic detection of biological anatomical landmarks within the colon is highly demanded, which can help reduce the burden of clinicians by providing guidance information for the locations of lesion areas. In this article, we propose a novel deep learning-based approach to detect biological anatomical landmarks in colonoscopy videos. First, …
ColonSplat: Reconstruction of Peristaltic Motion in Colonoscopy with Dynamic Gaussian Splatting
Jagiellonian University, Kraków, Poland（杰洛尼摩大学）；Warsaw University of Technology, Poland（华沙技术大学）；Sano Centre for Computational Medicine, Kraków, Poland（Sano计算医学中心）；University of Verona, Italy（威尼斯大学）；IDEAS Research Institute, Warsaw, Poland（IDEAS研究机构）
C3VDv2 -- Colonoscopy 3D video dataset with enhanced realism
Department of Biomedical Engineering, Johns Hopkins University（生物医学工程系，约翰霍普金斯大学）；Division of Gastroenterology and Hepatology, Johns Hopkins Medicine（胃肠病学与肝病学分会，约翰霍普金斯医学）
Monocular 3D vehicle localization is an important task in Intelligent Transportation System (ITS) and Cooperative Vehicle Infrastructure System (CVIS), which is usually achieved by monocular 3D vehicle detection. However, depth information cannot be obtained directly by monocular cameras due to the inherent imaging mechanism, resulting in more challenging monocular 3D tasks. Most of the current monocular 3D vehicle detection methods leverage 2D detectors and additional geometric modules, which reduces the efficiency. In this paper, we propose a 3D vehicle localization network CenterLoc3D for r…
Shandong University（山东大学）；Peking University（北京大学）；Tencent AI Lab（腾讯人工智能实验室）；Stanford University（斯坦福大学）；vjia（3vjia）
In this work, we tackle the problem of active camera localization, which controls the camera movements actively to achieve an accurate camera pose. The past solutions are mostly based on Markov Localization, which reduces the position-wise camera uncertainty for localization. These approaches localize the camera in the discrete pose space and are agnostic to the localization-driven scene property, which restricts the camera pose accuracy in the coarse scale. We propose to overcome these limitations via a novel active camera localization algorithm, composed of a passive and an active localizati…
Imperial College London（伦敦帝国理工学院）；Tongji University（同济大学）
Accurate prediction of future person location and movement trajectory from an egocentric wearable camera can benefit a wide range of applications, such as assisting visually impaired people in navigation, and the development of mobility assistance for people with disability. In this work, a new egocentric dataset was constructed using a wearable camera, with 8,250 short clips of a targeted person either walking 1) toward, 2) away, or 3) across the camera wearer in indoor environments, or 4) staying still in the scene, and 13,817 person bounding boxes were manually labelled. Apart from the boun…
Geometry-Aware Camera Localization for Bronchoscopy
Centre for Artificial Intelligence and Robotics, Hong Kong Institute of Science & Innovation, Chinese Academy of Sciences（中国科学院香港创新研究院人工智能与机器人中心）；Institute of Automation, Chinese Academy of Sciences（中国科学院自动化研究所）；The First Affiliated Hospital, Sun Yat-sen University（中山大学附属第一医院）
Institute of Automation, Chinese Academy of Sciences（中国科学院自动化研究所）；University of Chinese Academy of Sciences（中国科学院大学）
Recently, virtual reality, augmented reality, robotics, autonomous driving et al attract much attention of both academic and industrial community, in which image based camera localization is a key task. However, there has not been a complete review on image-based camera localization. It is urgent to map this topic to help people enter the field quickly. In this paper, an overview of image based camera localization is presented. A new and complete kind of classifications for image based camera localization is provided and the related techniques are introduced. Trends for the future development …
We present McAssoc, a deep learning approach to the as-sociation of detection bounding boxes in different views ofa multi-camera system. The vast majority of the academiahas been developing single-camera computer vision algo-rithms, however, little research attention has been directedto incorporating them into a multi-camera system. In thispaper, we designed a 3-branch architecture that leveragesdirect association and additional cross localization infor-mation. A new metric, image-pair association accuracy(IPAA) is designed specifically for performance evaluationof cross-camera detection assoc…
Object tracking and localization is a complex task that typically requires processing power beyond the capabilities of low-power embedded cameras. This paper presents a new approach to real-time object tracking and localization using multi-view binary keypoints descriptor. The proposed approach offers a compromise between processing power, accuracy and networking bandwidth and has been tested using multiple distributed low-power smart cameras. Additionally, multiple optimization techniques are presented to improve the performance of the keypoints descriptor for low-power embedded systems.
CaLDiff: Camera Localization in NeRF via Pose Diffusion
NepAl Applied Mathematics and Informatics Institute for research (NAAMII)（尼泊尔应用数学与信息学研究所）；ETH Zürich（苏黎世联邦理工学院）；State University of New York (SUNY) at Korea（纽约州立大学韩国分校）
Osaka University（大阪大学）；Nara Institute of Science and Technology（奈良先端科学技术大学院大学）
Accurate camera localization is an essential part of tracking systems. However, localization results are greatly affected by illumination. Including data collected under various lighting conditions can improve the robustness of the localization algorithm to lighting variation. However, this is very tedious and time consuming. By using synthesized images it is possible to easily accumulate a large variety of views under varying illumination and weather conditions. Despite continuously improving processing power and rendering algorithms, synthesized images do not perfectly match real images of t…
Feature point matching for camera localization suffers from scalability problems. Even when feature descriptors associated with 3D scene points are locally unique, as coverage grows, similar or repeated features become increasingly common. As a result, the standard distance ratio-test used to identify reliable image feature points is overly restrictive and rejects many good candidate matches. We propose a simple coarse-to-fine strategy that uses conservative approximations to robust local ratio-tests that can be computed efficiently using global approximate k-nearest neighbor search. We treat …
Camera fingerprints are precious tools for a number of image forensics tasks. A well-known example is the photo response non-uniformity (PRNU) noise pattern, a powerful device fingerprint. Here, to address the image forgery localization problem, we rely on noiseprint, a recently proposed CNN-based camera model fingerprint. The CNN is trained to minimize the distance between same-model patches, and maximize the distance otherwise. As a result, the noiseprint accounts for model-related artifacts just like the PRNU accounts for device-related non-uniformities. However, unlike the PRNU, it is only…
We present an unsupervised simultaneous learning framework for the task of monocular camera re-localization and depth estimation from unlabeled video sequences. Monocular camera re-localization refers to the task of estimating the absolute camera pose from an instance image in a known environment, which has been intensively studied for alternative localization in GPS-denied environments. In recent works, camera re-localization methods are trained via supervised learning from pairs of camera images and camera poses. In contrast to previous works, we propose a completely unsupervised learning fr…
Shenzhen University（深圳大学）；Guangdong Key Laboratory of Intelligent Information Processing（广东省智能信息处理重点实验室）；Shenzhen Institute of Artificial Intelligence and Robotics for Society（深圳人工智能与机器人研究院）；University of Nottingham（诺丁汉大学）
Camera localization is a fundamental requirement in robotics and computer vision. This paper introduces a pose-to-image translation framework to tackle the camera localization problem. We present PoseGANs, a conditional generative adversarial networks (cGANs) based framework for the implementation of pose-to-image translation. PoseGANs feature a number of innovations including a distance metric based conditional discriminator to conduct camera localization and a pose estimation technique for generated camera images as a stronger constraint to improve camera localization performance. Compared w…
Queensland University of Technology（昆士兰科技大学）；Ford Motor Company（福特汽车公司）
6-DoF visual localization systems utilize principled approaches rooted in 3D geometry to perform accurate camera pose estimation of images to a map. Current techniques use hierarchical pipelines and learned 2D feature extractors to improve scalability and increase performance. However, despite gains in typical recall@0.25m type metrics, these systems still have limited utility for real-world applications like autonomous vehicles because of their `worst' areas of performance - the locations where they provide insufficient recall at a certain required error tolerance. Here we investigate the uti…
Popular research areas like autonomous driving and augmented reality have renewed the interest in image-based camera localization. In this work, we address the task of predicting the 6D camera pose from a single RGB image in a given 3D environment. With the advent of neural networks, previous works have either learned the entire camera localization process, or multiple components of a camera localization pipeline. Our key contribution is to demonstrate and explain that learning a single component of this pipeline is sufficient. This component is a fully convolutional neural network for densely…
Technical University of Munich（慕尼黑工业大学）；Chalmers University of Technology（查尔姆斯理工大学）；CIIRC, Czech Technical University in Prague（捷克布拉格捷克理工大学信息、机器人与控制研究所）；Five AI Ltd.（Five AI有限公司）；Google Inc.（谷歌公司）
Long-term camera re-localization is an important task with numerous computer vision and robotics applications. Whilst various outdoor benchmarks exist that target lighting, weather and seasonal changes, far less attention has been paid to appearance changes that occur indoors. This has led to a mismatch between popular indoor benchmarks, which focus on static scenes, and indoor environments that are of interest for many real-world applications. In this paper, we adapt 3RScan - a recently introduced indoor RGB-D dataset designed for object instance re-localization - to create RIO10, a new long-…
Tokyo Institute of Technology（东京工业大学）；Olympus Corporation（奥林巴斯公司）
In this paper we introduce a new camera localization strategy designed for image sequences captured in challenging industrial situations such as industrial parts inspection. To deal with peculiar appearances that hurt standard 3D reconstruction pipeline, we exploit pre-knowledge of the scene by selecting key frames in the sequence (called as anchors) which are roughly connected to a certain location. Our method then seek the location of each frame in time-order, while recursively updating an augmented 3D model which can provide current camera location and surrounding 3D structure. In an experi…
Università degli Studi di Milano - Bicocca（米兰比可卡大学）；Universidad de Alcalá（阿尔卡拉大学）
Camera localization, i.e., camera pose regression, represents an important task in computer vision since it has many practical applications such as in the context of intelligent vehicles and their localization. Having reliable estimates of the regression uncertainties is also important, as it would allow us to catch dangerous localization failures. In the literature, uncertainty estimation in Deep Neural Networks (DNNs) is often performed through sampling methods, such as Monte Carlo Dropout (MCD) and Deep Ensemble (DE), at the expense of undesirable execution time or an increase in hardware r…
Light-weight camera localization in existing maps is essential for vision-based navigation. Currently, visual and visual-inertial odometry (VO\&VIO) techniques are well-developed for state estimation but with inevitable accumulated drifts and pose jumps upon loop closure. To overcome these problems, we propose an efficient monocular camera localization method in prior LiDAR maps using direct 2D-3D line correspondences. To handle the appearance differences and modality gaps between LiDAR point clouds and images, geometric 3D lines are extracted offline from LiDAR maps while robust 2D lines are …
Rutgers University（罗格斯大学）；Toyota Motor North America（丰田汽车北美公司）
In Smart City and Vehicle-to-Everything (V2X) systems, acquiring pedestrians' accurate locations is crucial to traffic safety. Current systems adopt cameras and wireless sensors to detect and estimate people's locations via sensor fusion. Standard fusion algorithms, however, become inapplicable when multi-modal data is not associated. For example, pedestrians are out of the camera field of view, or data from camera modality is missing. To address this challenge and produce more accurate location estimations for pedestrians, we propose a Generative Adversarial Network (GAN) architecture. During…
Australian National University（澳大利亚国立大学）；University of Technology Sydney（悉尼科技大学）
This paper tackles the problem of Cross-view Video-based camera Localization (CVL). The task is to localize a query camera by leveraging information from its past observations, i.e., a continuous sequence of images observed at previous time stamps, and matching them to a large overhead-view satellite image. The critical challenge of this task is to learn a powerful global feature descriptor for the sequential ground-view images while considering its domain alignment with reference satellite images. For this purpose, we introduce CVLNet, which first projects the sequential ground-view images in…
Georgia Institute of Technology（佐治亚理工学院）；NVIDIA（英伟达公司（NVIDIA））
Maps are a key component in image-based camera localization and visual SLAM systems: they are used to establish geometric constraints between images, correct drift in relative pose estimation, and relocalize cameras after lost tracking. The exact definitions of maps, however, are often application-specific and hand-crafted for different scenarios (e.g. 3D landmarks, lines, planes, bags of visual words). We propose to represent maps as a deep neural net called MapNet, which enables learning a data-driven map representation. Unlike prior work on learning maps, MapNet exploits cheap and ubiquitou…
Technical University of Munich（慕尼黑工业大学）；Siemens AG（西门子公司）
We propose a lightweight retrieval-based pipeline to predict 6DOF camera poses from RGB images. Our pipeline uses a convolutional neural network (CNN) to encode a query image as a feature vector. A nearest neighbor lookup finds the pose-wise nearest database image. A siamese convolutional neural network regresses the relative pose from the nearest neighboring database image to the query image. The relative pose is then applied to the nearest neighboring absolute pose to obtain the query image's final absolute pose prediction. Our model is a distilled version of NN-Net that reduces its paramete…
Deep learning has achieved impressive results in camera localization, but current single-image techniques typically suffer from a lack of robustness, leading to large outliers. To some extent, this has been tackled by sequential (multi-images) or geometry constraint approaches, which can learn to reject dynamic objects and illumination conditions to achieve better performance. In this work, we show that attention can be used to force the network to focus on more geometrically robust objects and features, achieving state-of-the-art performance in common benchmark, even if using only a single im…
For several emerging technologies such as augmented reality, autonomous driving and robotics, visual localization is a critical component. Directly regressing camera pose/3D scene coordinates from the input image using deep neural networks has shown great potential. However, such methods assume a stationary data distribution with all scenes simultaneously available during training. In this paper, we approach the problem of visual localization in a continual learning setup -- whereby the model is trained on scenes in an incremental manner. Our results show that similar to the classification dom…
ETH Zurich（苏黎世联邦理工学院）；Niantic；University College London（伦敦大学学院）
Visual re-localization means using a single image as input to estimate the camera's location and orientation relative to a pre-recorded environment. The highest-scoring methods are "structure based," and need the query camera's intrinsics as an input to the model, with careful geometric optimization. When intrinsics are absent, methods vie for accuracy by making various other assumptions. This yields fairly good localization scores, but the models are "narrow" in some way, eg., requiring costly test-time computations, or depth sensors, or multiple query frames. In contrast, our proposed method…
In a robotised warehouse, as in any place where robots move autonomously, a major issue is the localization or detection of human operators during their intervention in the work area of the robots. This paper introduces a wearable human localization system for large warehouses, which utilize preinstalled infrastructure used for localization of automated guided vehicles (AGVs). A monocular down-looking camera is detecting ground nodes, identifying them and computing the absolute position of the human to allow safe cooperation and coexistence of humans and AGVs in the same workspace. A virtual s…
Simon Fraser University（西蒙菲莎大学）；Alibaba A.I Labs（阿里巴巴人工智能实验室）
Camera localization aims to estimate 6 DoF camera poses from RGB images. Traditional methods detect and match interest points between a query image and a pre-built 3D model. Recent learning-based approaches encode scene structures into a specific convolutional neural network (CNN) and thus are able to predict dense coordinates from RGB images. However, most of them require re-training or re-adaption for a new scene and have difficulties in handling large-scale scenes due to limited network capacity. We present a new method for scene agnostic camera localization using dense scene matching (DSM)…
The University of Tokyo（东京大学）；National Institute of Informatics（国立信息学研究所）
Camera geo-localization from a monocular video is a fundamental task for video analysis and autonomous navigation. Although 3D reconstruction is a key technique to obtain camera poses, monocular 3D reconstruction in a large environment tends to result in the accumulation of errors in rotation, translation, and especially in scale: a problem known as scale drift. To overcome these errors, we propose a novel framework that integrates incremental structure from motion (SfM) and a scale drift correction method utilizing geo-tagged images, such as those provided by Google Street View. Our correctio…
Monocular Person Localization under Camera Ego-motion
Shenzhen Key Laboratory of Robotics and Computer Vision, Southern University of Science and Technology (SUSTech)（机器人与计算机视觉实验室，南方科技大学）；Department of Electronic and Electrical Engineering, SUSTech（电子与电气工程系，南方科技大学）
LISPEN（LISPEN实验室）；Arts et Métiers ParisTech（巴黎高等工艺学院）
Unlike classification, position labels cannot be assigned manually by humans. For this reason, generating supervision for precise object localization is a hard task. This paper details a method to create large datasets for 3D object localization, with real world images, using an industrial robot to generate position labels. By knowledge of the geometry of the robot, we are able to automatically synchronize the images of the two cameras and the object 3D position. We applied it to generate a screw-driver localization dataset with stereo images, using a KUKA LBR iiwa robot. This dataset could th…
University of California Berkeley（加州大学伯克利分校）；DSO National Laboratories（新加坡国防科技研究院）；National University of Singapore（新加坡国立大学）；Graz University of Technology（格拉茨技术大学）；ETH Zürich（苏黎世联邦理工学院）；Microsoft（微软）
Cameras are a crucial exteroceptive sensor for self-driving cars as they are low-cost and small, provide appearance information about the environment, and work in various weather conditions. They can be used for multiple purposes such as visual navigation and obstacle detection. We can use a surround multi-camera system to cover the full 360-degree field-of-view around the car. In this way, we avoid blind spots which can otherwise lead to accidents. To minimize the number of cameras needed for surround perception, we utilize fisheye cameras. Consequently, standard vision pipelines for 3D mappi…
