MoS2 are facile, stable, non-toxic, affordable materials with reasonable price, and have exhibit its superior potential in catalysis, sensing, opt electrochemical, environmental relate application1, etc. Modification of MoS2 materials has been widely applied for adjusting and formulate the relative performance in certain application field. Making vacancy, doping with other atoms, expending of the layer space, heterojunction engineering, phase engineering etc. have been applied to facilitate the catalytic hydrogen evolution performance. We make a detailed summary on MoS2 characterization methods, synthesis, HER performance, mechanisms, to make a holistic understanding on the interplay between the structure, chemistry, and HER performance, which will give directions to elevate other electrochemical reaction by MoS2.
An effective method for increasing the electrocatalytic activity of metallic glasses (MGs) in hydrogen evolution reaction (HER) is reported. This method applies a noble metal hybridization strategy to design a highly reactive catalyst for alkaline HER based on MGs with a nano-porous structure. The porous structure provides an abundance of active sites and exposes a large specific surface area to the electrolyte, thus effectively improving the activity of the HER catalysts. The doping of Au element can create electronic defects, adjust the electronic structure, change the electronic interaction…
The development of active catalysts for hydrogen evolution reaction (HER) made from low-cost materials constitutes a crucial challenge in the utilization of hydrogen energy. Earth-abundant molybdenum disulfide (MoS$_2$) has been discovered recently with good activity and stability for HER. In this report, we employed the hydrothermal technique for MoS$_2$ synthesis which is a cost-effective and environmentally friendly approach and has the potential for future mass production. To investigate the structure-property relationship, scanning electron microscope (SEM), transmission electron microsco…
Advanced materials for electrocatalytic and photoelectrochemical water splitting are central to the area of renewable energy. Here, we developed a solvothermal synthesis of MoS2 nanoparticles selectively on reduced graphene oxide (RGO) sheets suspended in solution. The resulting MoS2/RGO hybrid material possessed nanoscopic few-layer MoS2 structures with abundant exposed edges stacked onto graphene, in strong contrast to large aggregated MoS2 particles grown freely in solution without GO. The MoS2/RGO hybrid exhibited superior electrocatalytic activity in the hydrogen evolution reaction (HER) …
The role of catalyst stability on the adverse effects of hydrogen peroxide (H2O2) formation rates in a proton exchange membrane fuel cell (PEMFC) is investigated for Pt, Pt binary (PtX, X = Co, Ru, Rh, V, Ni) and ternary (PtCoX, X = Ir, Rh) catalysts. The selectivity of these catalysts towards H2O2 formation in the oxygen reduction reaction (ORR) was measured on a rotating ring disc electrode. These measured values were used in conjunction with local oxygen and proton concentrations to estimate local H2O2 formation rates in a PEMFC anode and cathode. The effect of H2O2 formation rates on the m…
The d-band center descriptor based on the adsorption strength of adsorbate has been widely used in understanding and predicting the catalytic activity in various metal catalysts. However, its applicability is unsure for the single-atom-anchored two-dimensional (2D) catalysts. Here, taking the hydrogen (H) adsorption on the single-atom-anchored 2D basal plane as example, we examine the influence of orbitals interaction on the bond strength of hydrogen adsorption. We find that the adsorption of H is formed mainly via the hybridization between the 1s orbital of H and the vertical dz2 orbital of a…
Metal heteroatoms dispersed in nitrogen-doped graphene display promising catalytic activity for fuel cell reactions such as the hydrogen evolution reaction (HER). Here we explore the effects of dopant concentration on the synergistic catalytic behaviour of a paired metal atom active site comprised of Co and Pt atoms. The metals are coordinated to six atoms in a vacancy of N-doped graphene. We find that HER activity is enhanced with increasing N concentration, where the free energy of hydrogen atom adsorption ranges from 0.23 to -0.42 eV as the doping changes from a single N atom doped in the p…
Hydrogen is a promising energy carrier and key agent for many industrial chemical processes1. One method for generating hydrogen sustainably is via the hydrogen evolution reaction (HER), in which electrochemical reduction of protons is mediated by an appropriate catalyst-traditionally, an expensive platinum-group metal. Scalable production requires catalyst alternatives that can lower materials or processing costs while retaining the highest possible activity. Strategies have included dilute alloying of Pt2 or employing less expensive transition metal alloys, compounds or heterostructures (e.g…
Magneli phases of titanium dioxide (such as Ti4O7, Ti5O9, etc.) provide electronic properties, namely a stable metallic behavior at room temperature. In this manuscript, we demonstrate that nanoscopic Magneli phases, formed intrinsically in anatase during a thermal aerosol synthesis, can enable significant photocatalytic H2 generation. This without the use of any extrinsic co-catalyst in anatase. Under optimized conditions, mixed phase particles of 30 percent anatase, 25 percent Ti4O7 and 20 percent Ti5O9 are obtained that can provide, under solar light, direct photocatalytic H2 evolution at a…
Topological quantum catalysts (TQCs), where metallic surface states from nontrivial band topology serve as the mechanism to favor heterogeneous catalysis processes, have been well demonstrated in three dimensional (3D) examples but have been rarely discussed in 2D scale. Here, we develop a design scheme to realize 2D TQCs with showing traversing nodal line at the Brillouin zone boundary, large Fermi arc on the edge, and nearly zero Gibbs free energy (ΔGH*) for hydrogen evolution reaction (HER). We demonstrate the 2D Cu2C2N4 sheet is a such example. The material manifests an open nodal line tra…
Clean hydrogen production through efficient and cost-effective electrochemical water splitting is highly promising to meeting future global energy demands. The design of Earth-abundant materials with both high activity for hydrogen evolution reaction (HER) and electrochemical stability in both acidic and alkaline environments summarize the outcomes needed for practical applications. Here, we report a non-noble 3d metal Cl-chemical doping of liquid phase exfoliated single/few-layer flakes of MoSe2 for creating MoSe2 nanoflakes/3d metal oxide-hydr(oxy)oxide hybrid HER-catalysts. We propose that …
Topological nodal line (DNL) semimetals, formed by a closed loop of the inverted bands in the bulk, result in the nearly flat drumhead-like surface states with a high electronic density near the Fermi level. The high catalytic active sites associated with the high electronic densities, the good carrier mobility, and the proper thermodynamic stabilities with $ΔG_{H^*}$$\approx$0 are currently the prerequisites to seek the alternative candidates to precious platinum for catalyzing electrochemical hydrogen (HER) production from water. Within this context, it is natural to consider whether or not …
We report the performance of a hydrogen-chlorine electrochemical cell with a chlorine electrode employing a low precious metal content alloy oxide electrocatalyst for the chlorine electrode: (Ru_0.09Co_0.91)_3O_4. The cell employs a commercial hydrogen fuel cell electrode and transports protons through a Nafion membrane in both galvanic and electrolytic mode. The peak galvanic power density exceeds 1 W cm^-2, which is twice previous literature values. The precious metal loading of the chlorine electrode is below 0.15 mg Ru cm^-2. Virtually no activation losses are observed, allowing the cell t…
NaBH4 is a very cheap and hydrogen rich material and a potential hydrogen store. However, high temperature of its thermal decomposition (above 530°C) renders it inapplicable in practical use. Here, we have studied the effect of addition of diverse V containing catalysts on thermal hydrogen desorption. It turns out that mechanochemical doping of NaBH4 with vanadium metal, its oxides or nanoparticles lowers the temperature of pyrolysis significantly. Notably, NaBH4 milled for 3 hrs with 25 wt.% of V2O5 or VO2 releases ca. 70 % of stored hydrogen in the temperature range from ca. 370°C to 450°C. …
The hydrogen evolution reaction (HER) is a key process in electrochemical water splitting. To lower the cost and environmental impact of this process, it is highly motivated to develop electrocatalysts with low or no content of noble metals. Here we report on a novel and ingenious synthesis of hybrid PtxNi1-x electrocatalysts in the form of a nanoparticle-necklace structure named nanotrusses, with very low noble metal content. The nanotruss structure possesses important features, such as good conductivity, high surface area, strong interlinking and substrate adhesion, which renders for an exce…
Synthesis of monolayer MoS2 is essential for fulfilling the potential of MoS2 in catalysis, optoelectronics and valleytronics, etc. Herein, we report for the first time the scalable growth of high quality, domain size tunable (edge length from ~ 200 nm to 50 μm), strictly monolayer MoS2 on commercially available Au foils, via a low pressure chemical vapor deposition method. The nanosized triangular MoS2 flakes on Au foils was proved to be an excellent electrocatalyst for hydrogen evolution reaction (HER), featured by a rather low Tafel slope (61 mV/decade) and a supreme exchange current densit…
Two-dimensional materials supported by single atom catalysis (SACs) are foreseen to replace platinum for large-scale industrial scalability of sustainable hydrogen generation. Here, a series of metal (Al, Sc, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn) and non-metal (B, C, N, O, F, Si, P, S, Cl) single atoms embedded on various active sites of g-C$_3$N$_4$ are screened by DFT calculations and six machine learning (ML) algorithms (support vector regression, gradient boosting regression, random forest regression, AdaBoost regression, multilayer perceptron regression, ridge regression). Our results based on f…
Hydrogen spillover and storage for single-site metal catalysts, including single-atom catalysts (SACs) and single nanocluster catalysts, have been elucidated for various supports but remain poorly understood for inert carbon supports. Here, we use synchrotron radiation-based methods to investigate the role of single-site Ti catalysts on graphene for hydrogen spillover and storage. Our in-situ angle-resolved photoemission spectra results demonstrate a bandgap opening and the X-ray absorption spectra reveal the formation of C-H bonds, both indicating the partial graphene hydrogenation. With incr…
High throughput theoretical methods are increasingly used to identify promising photocatalytic materials for hydrogen generation from water as a clean source of energy. While most promising water splitting candidates require co-catalyst loading and electrical biasing, computational costs to predict them apriori becomes large. It is therefore important to identify bare, bias-free semiconductor photocatalysts with small initial hydrogen production rates, often in the range of tens of nano-mols per hour, as these can become highly efficient with further co-catalyst loading and biasing. Here we re…
The use of highly active and robust catalysts is crucial for producing green hydrogen by water electrolysis as we strive to achieve global carbon neutrality. Noble metals like platinum are currently used in industry for the hydrogen evolution reaction (HER), but suffer from scarcity, high price and unsatisfied performance and stability at large current density, restricting their large scale implementations. Here we report the synthesis of a new type of monolithic catalyst (MC) consisting of a metal disulfide (e.g., TaS2) catalyst vertically bonded to a conductive substrate of the same metal by…
Topological states of matter and their corresponding properties are classical research topics in condensed matter physics. Quite recently, the application of materials that feature these states has been extended to the field of electrochemical catalysis and become an emerging research topic that is receiving increasing interest. In particular, several recent experimental studies performed on topological semimetals have already revealed high catalytic performance towards hydrogen evolution reaction (HER), strongly promoting acceptance of the fresh concept of the topological catalyst. This emerg…
The high-throughput scalable production of cheap, efficient and durable electrocatalysts that work well at high current densities demanded by industry is a great challenge for the large-scale implementation of electrochemical technologies. Here we report the production of a 2D MoS2-based ink-type electrocatalyst by a scalable top-down exfoliation technique followed by a simple heat treatment. The catalyst shows a high current density of 1000 mA cm^-2 at an overpotential of 454 mV for the hydrogen evolution reaction (HER) without the need of iR correction, as well as good stability over 24 hour…
Complex light metal hydrides possess many properties which make them attractive as a storage medium for hydrogen, but typically, catalysts are required to lower the hydrogen desorption temperature and to facilitate hydrogen uptake in the form of a reversible reaction. The overwhelming focus in the search for catalysing agents has been on compounds containing titanium, but the precise mechanism of their actions remains somewhat obscure. A recent experiment has now shown that fullerenes (C$_{60}$) can also act as catalyst for both hydrogen uptake and release in lithium borohydride (LiBH$_4$). In…
Quantum materials such as Topological Insulators (TI) have been promising due to diverse applications of their robust surface/edge states in the bulk (3D) and two-dimensional (2D) regime. Such conducting surface states in 3D systems, host "\textit{electron bath}" which are known to facilitate catalysis. However, the analogous effects in 2D scenarios wherein, conducting helical edge states giving rise to Fermionic accumulation has been scarcely addressed. Using density functional theory based \textit{first-principles} calculations, we demonstrate that, the conducting edge states in 2D TI such a…
The ability to efficiently evolve hydrogen via electrocatalysis at low overpotentials holds tremendous promise for clean energy. Hydrogen evolution reaction (HER) can be easily achieved from water if a voltage above the thermodynamic potential of the HER is applied. Large overpotentials are energetically inefficient but can be lowered with expensive platinum based catalysts. Replacement of Pt with inexpensive, earth abundant electrocatalysts would be significantly beneficial for clean and efficient hydrogen evolution. Towards this end, promising HER characteristics have been reported using 2H …
Designing electrocatalysts for HER in alkaline conditions to overcome the sluggish kinetics associated with the additional water dissociation step is a recognized challenge in promoting the hydrogen economy. To this end, delicately tuning the atomic-scale structure and surface composition of nanoparticles is a common strategy and, specifically, making use of hybrid structures, can produce synergistic effects that lead to highly active catalysts. Here, we present a core-shell catalyst of Ag@MoS$_2$ that shows promising results towards the hydrogen evolution reaction (HER) in both 0.5 M H2SO4 an…
Introduction of interstitial dopants has opened a new pathway to optimize nanoparticle catalytic activity for, e.g., hydrogen evolution/oxidation and other reactions. Here, we discuss the stability of a property-enhancing dopant, B, introduced through controlled synthesis of an electrocatalyst Pd aerogel. We observe significant removal of B after the hydrogen evolution/oxidation reaction. Ab-initio calculations show that the high stability of sub-surface B in Pd is substantially reduced when H is ad/absorbed on the surface, favoring its departure from the host nanostructure. The destabilizatio…
Large scale implementation of electrochemical water splitting for hydrogen evolution requires cheap and efficient catalysts to replace expensive platinum. Molybdenum disulfide is one of the most promising alternative catalysts but its intrinsic activity is still inferior to platinum. There is therefore a need to explore new active site origins in molybdenum disulfide with ultrafast reaction kinetics and to understand their mechanisms. Here, we report a universal cold hydrogen plasma reduction method for synthesizing different single atoms sitting on two-dimensional monolayers. In case of molyb…
Electrocatalytic hydrogen evolution reaction (HER) in alkaline media is a promising electrochemical energy conversion strategy. Ruthenium (Ru) is an efficient catalyst with a desirable cost for HER, however, the sluggish H2O dissociation process, due to the low H2O adsorption on its surface, currently hampers the performances of this catalyst in alkaline HER. Herein, we demonstrate that the H2O adsorption improves significantly by the construction of Ru-O-Mo sites. We prepared Ru/MoO2 catalysts with Ru-O-Mo sites through a facile thermal treatment process and assessed the creation of Ru-O-Mo i…
Among transition metal dichalcogenides (TMdCs) as alternatives for Pt-based catalysts, metallic-TMdCs catalysts have highly reactive basal-plane but are unstable. Meanwhile, chemically stable semiconducting-TMdCs show limiting catalytic activity due to their inactive basal-plane. Here, we propose metallic vanadium sulfide (VSn) nanodispersed in a semiconducting MoS2 film (V-MoS2) as an efficient catalyst. During synthesis, vanadium atoms are substituted into hexagonal monolayer MoS2 to form randomly distributed VSn units. The V-MoS2 film on a Cu electrode exhibits Pt-scalable catalytic perform…
The present study reports the catalytic action of two-dimensional (2D) layered materials (MoS2 and WS2) for improving the de/re-hydrogenation kinetics of MgH2. The MgH2 start desorbing at 277 C with a hydrogen storage capacity of 5.95 wt% in the presence of WS2 catalyst whereas onset desorption temperature of MgH2 catalyzed by MoS2 is 330 C. The MgH2-WS2 absorbed hydrogen ~ 3.72 wt% within 1.3 minutes at 300 C under 13 atm hydrogen pressure and it desorbed ~5.57 wt% within 20 minutes at 300 C under 1 atm hydrogen pressure. We have performed 25 cycles of dehydrogenation (under 1 atm hydrogen pr…
Coordination Engineering of Dual-Atom Catalysts for Overall Water Splitting: Mechanistic Insights from Constant-Potential First-Principles and Machine Learning
Anhui Province Key Laboratory of Intelligent Computing and Applications, College of Physics and Electronic Engineering, Huaibei Normal University（淮北师范大学物理与电子工程学院安徽省智能计算与应用重点实验室）；Huaibei Key Laboratory for Advanced Thin Film Materials and Technology, Huaibei Normal University（淮北师范大学淮北先进薄膜材料与技术重点实验室）
2D semiconducting nanosheets of Transition Metal Dichalcogenides are attractive materials for solar energy conversion because of their unique absorption properties. Here, we propose Mo thio- and oxo-thio-complexes anchored on 2D p-WSe2 nanosheets for efficient water splitting under visible light irradiation with photocurrent density up to 2.0 mA cm-2 at -0.2 V/NHE. Besides developing high electro-catalytic activity, the Mo complexe films were shown to display ability to heal surface defects. We propose that the observed healing of surface defects arises from the strong adsorption on point defe…
Laterally large (~3 micrometers), atomically-thin two-dimensional (2D) Bi2O2CO3 nanosheets (2D bismuth oxycarbonate, 2D bismutite) are fabricated via sonochemically-assisted template-free synthesis. Key to the synthesis of the freestanding, laterally large 2D Bi2O2CO3 nanosheets from bulk Bi powder is choice of suspension medium, controlled reaction temperatures and several hours processing time. Lateral sizes of 2D Bi2O2CO3 can be controlled between micrometer-sized nanosheets and tens of nm sized nanoflakes solely based on the choice of suspension medium. The here introduced 2D Bi2O2CO3 nano…
Fuel cells recombine water from H2 and O2 thereby powering e.g. cars or houses with no direct carbon emission. In anion-exchange membrane fuel cells (AEMFCs), to reach high power densities, operating at high pH is an alternative to using large volumes of noble metals catalysts at the cathode, where the oxygen-reduction reaction occurs. However, the sluggish kinetics of the hydrogen-oxidation reaction (HOR) hinders upscaling despite promising catalysts. Here, we observe an unexpected ingress of B into Pd nano-catalysts synthesised by wet-chemistry, gain control over this B-doping, and report on…
We reveal a correlation between the M-X bond energy descriptor EMX for the optimal catalyst in a family of stoichiometry MiXj, and an intensive quantity defined as the standard enthalpy of the catalyzed reaction normalized to one mole of element X transferred by this reaction from reactants to products. M is a transition element, and the stoichiometry MiXj is fixed at the solid/fluid interface by the reaction conditions. We illustrate this for a relevant set of reactions involved in solar energy and industrial applications such as oxygen evolution, oxygen reduction and hydrogen evolution in el…
Wide proliferation of low temperature hydrogen fuel cell systems, a key part of the hydrogen economy, is hindered by degradation of the platinum cathode catalyst. Here, we provide a device level assessment of the molecular scale catalyst degradation phenomena, using advanced operando X-ray scattering tomography tailored for device-scale imaging. Each cell component, including the catalyst, carbon support, polymer electrolyte, and liquid water can be simultaneously mapped, allowing for deep correlative analysis. Chemical and thermal gradients formed inside the operating fuel cell produce highly…
For electrochemical hydrogen evolution reaction (HER), developing high-performance catalysts without containing precious metals has been a major research focus in the current. Herein, we show the feasibility of HER catalytic enhancement in Ni-based materials based on topological engineering from hybrid Weyl states. Via a high-throughput computational screening from 140 000 materials, we identify a chiral compound NiSi is a hybrid Weyl semimetal (WSM) with showing bulk type-I and type-II Weyl nodes and long surface Fermi arcs near the Fermi level. Sufficient evidences verify that topological ch…
The search for highly efficient and low-cost catalysts is one of the main driving forces in catalytic chemistry. Current strategies for the catalyst design focus on increasing the number and activity of local catalytic sites, such as the edge-sites of molybdenum disulfides in the hydrogen evolution reaction (HER). Here, we propose and demonstrate a different principle that goes beyond local site optimization by utilizing topological electronic states, a global property of the material, to spur catalytic activity. For HER, we have found excellent catalysts among the transition-metal monopnictid…
In the present work, a simple strategy is used to thermally oxidize TiN nanopowder (ca. 20 nm) to an anatase phase of a TiO2:Ti3+:N compound. In contrast to the rutile phase of such a compound this photocatalyst provides photocatalytic activity for hydrogen evolution under AM1.5 conditions - this without the use of any noble metal co-catalyst. Moreover the photocatalyst is active and stable over extended periods of time (tested for 4 months). Importantly, to achieve successful conversion to the active anatase polymorph, sufficiently small starting particles of TiN are needed. The key factor fo…
The design of efficient and cost-effective catalysts for the hydrogen evolution reaction (HER) is the key for molecular hydrogen (H2) production from electrochemical water splitting. Transition metal dichalcogenides (MX2), most notably group-6 MX2 (e.g., MoS2 and WS2), are appealing catalysts for the HER alternative to the best, but highly expensive, Pt-group elements. However, their HER activity is typically restricted to their edge sites rather than their basal plane. Furthermore, their semiconducting properties hinder an efficient electron transfer to the catalytic sites, which impedes a hi…
Defect-Engineered h-BN as a Platform for Single-Atom HER Catalysts: Descriptor Screening Refined by Electrochemical Stability Analysis
University of Belgrade − Faculty of Physical Chemistry（贝尔格莱德大学物理化学学院）；Luleå University of Technology（吕勒奥理工学院）；Serbian Academy of Sciences and Arts（塞尔维亚科学与艺术院）
Molybdenum sulfide (MoS$_2$) has attracted significant attention due to its great potential as a low-cost and efficient catalyst for the hydrogen evolution reaction. Developing a facile, easily upscalable, and inexpensive approach to produce catalytically active nanostructured MoS$_2$ with a high yield would significantly advance its practical application. Colloidal synthesis offers several advantages over other preparation techniques to overcome the low reaction yield of exfoliation and drawbacks of expensive equipment and processes used in chemical vapor deposition. In this work, we report a…
Large scale production of hydrogen by electrochemical water splitting is considered as a promising technology to address critical energy challenges caused by the extensive use of fossil fuels. Although nonprecious nickel-based catalysts work well at low current densities, they need large overpotentials at high current densities that hinders their potential applications in practical industry. Here we report a hydroxide-mediated nickel based electrocatalyst for high current density hydrogen evolution, which delivers a current density of 1000 mA cm-2 at an overpotential of 98 mV. Combined X-ray a…
