Memristive crossbars suffer from non-idealities (such as, sneak paths) that degrade computational accuracy of the Deep Neural Networks (DNNs) mapped onto them. A 1T-1R synapse, adding a transistor (1T) in series with the memristive synapse (1R), has been proposed to mitigate such non-idealities. We observe that the non-linear characteristics of the transistor affect the overall conductance of the 1T-1R cell which in turn affects the Matrix-Vector-Multiplication (MVM) operation in crossbars. This 1T-1R non-ideality arising from the input voltage-dependent non-linearity is not only difficult to model or formulate, but also causes a drastic performance degradation of DNNs when mapped onto crossbars. In this paper, we analyse the non-linearity of the 1T-1R crossbar and propose a novel Non-linearity Aware Training (NEAT) method to address the non-idealities. Specifically, we first identify the range of network weights, which can be mapped into the 1T-1R cell within the linear operating region of the transistor. Thereafter, we regularize the weights of the DNNs to exist within the linear operating range by using iterative training algorithm. Our iterative training significantly recovers the classification accuracy drop caused by the non-linearity. Moreover, we find that each layer has a different weight distribution and in turn requires different gate voltage of transistor to guarantee linear operation. Based on this observation, we achieve energy efficiency while preserving classification accuracy by applying heterogeneous gate voltage control to the 1T-1R cells across different layers. Finally, we conduct various experiments on CIFAR10 and CIFAR100 benchmark datasets to demonstrate the effectiveness of our non-linearity aware training. Overall, NEAT yields ~20% energy gain with less than 1% accuracy loss (with homogeneous gate control) when mapping ResNet18 networks on 1T-1R crossbars.
Passive crossbar arrays based upon memristive devices, at crosspoints, hold great promise for the future high-density and non-volatile memories. The most significant challenge facing memristive device based crossbars today is the problem of sneak-path currents. In this paper, we investigate a memristive device with intrinsic rectification behavior to suppress the sneak-path currents in crossbar arrays. The device model is implemented in Verilog-A language and is simulated to match device characteristics readily available in the literature. Then, we systematically evaluate the read operation pe…
Memristor crossbar architecture is one of the most popular circuit configurations due to its wide range of practical applications. The crossbar architecture can emulate the weighted summation operation, called multiply and accumulate operation (MAC). The errors to MAC computing get introduced due to a range of crossbar variability. We broadly group the variability in three categories: (1) device-to-device variations, (2) programming nonlinearity, and (3) those from peripheral circuits. This tutorial provides insights into the variability and compensation approaches that can be adopted to reduc…
On-device intelligence is gaining significant attention recently as it offers local data processing and low power consumption. In this research, an on-device training circuitry for threshold-current memristors integrated in a crossbar structure is proposed. Furthermore, alternate approaches of mapping the synaptic weights into fully-trained and semi-trained crossbars are investigated. In a semi-trained crossbar a confined subset of memristors are tuned and the remaining subset of memristors are not programmed. This translates to optimal resource utilization and power consumption, compared to a…
Emerging non-volatile memory (NVM) technologies offer unique advantages in energy efficiency, latency, and features such as computing-in-memory. Consequently, emerging NVM technologies are considered an ideal substrate for computation and storage in future-generation neuromorphic platforms. These technologies need to be evaluated for fundamental reliability and security issues. In this paper, we present \emph{NeuroHammer}, a security threat in ReRAM crossbars caused by thermal crosstalk between memory cells. We demonstrate that bit-flips can be deliberately induced in ReRAM devices in a crossb…
In-memory computing is an emerging non-von Neumann computing paradigm where certain computational tasks are performed in memory by exploiting the physical attributes of the memory devices. Memristive devices such as phase-change memory (PCM), where information is stored in terms of their conductance levels, are especially well suited for in-memory computing. In particular, memristive devices, when organized in a crossbar configuration can be used to perform matrix-vector multiply operations by exploiting Kirchhoff's circuit laws. To explore the feasibility of such in-memory computing cores in …
There is widespread interest in emerging technologies, especially resistive crossbars for accelerating Deep Neural Networks (DNNs). Resistive crossbars offer a highly-parallel and efficient matrix-vector-multiplication (MVM) operation. MVM being the most dominant operation in DNNs makes crossbars ideally suited. However, various sources of device and circuit non-idealities lead to errors in the MVM output, thereby reducing DNN accuracy. Towards that end, we propose crossbar re-mapping strategies to mitigate line-resistance induced accuracy degradation in DNNs, without having to re-train the le…
The advances in the field of machine learning using neuromorphic systems have paved the pathway for extensive research on possibilities of hardware implementations of neural networks. Various memristive technologies such as oxide-based devices, spintronics and phase change materials have been explored to implement the core functional units of neuromorphic systems, namely the synaptic network, and the neuronal functionality, in a fast and energy efficient manner. However, various non-idealities in the crossbar implementations of the synaptic arrays can significantly degrade performance of neura…
Over the last decade, memristive devices have been widely adopted in computing for various conventional and unconventional applications. While the integration density, memory property, and nonlinear characteristics have many benefits, reducing the energy consumption is limited by the resistive nature of the devices. Memcapacitors would address that limitation while still having all the benefits of memristors. Recent work has shown that with adjusted parameters during the fabrication process, a metal-oxide device can indeed exhibit a memcapacitive behavior. We introduce novel memcapacitive logi…
Deep Neural Networks (DNNs) have been shown to be prone to adversarial attacks. Memristive crossbars, being able to perform Matrix-Vector-Multiplications (MVMs) efficiently, are used to realize DNNs on hardware. However, crossbar non-idealities have always been devalued since they cause errors in performing MVMs, leading to computational accuracy losses in DNNs. Several software-based defenses have been proposed to make DNNs adversarially robust. However, no previous work has demonstrated the advantage conferred by the crossbar non-idealities in unleashing adversarial robustness. We show that …
The progress in the field of neural computation hinges on the use of hardware more efficient than the conventional microprocessors. Recent works have shown that mixed-signal integrated memristive circuits, especially their passive ('0T1R') variety, may increase the neuromorphic network performance dramatically, leaving far behind their digital counterparts. The major obstacle, however, is relatively immature memristor technology so that only limited functionality has been demonstrated to date. Here we experimentally demonstrate operation of one-hidden layer perceptron classifier entirely in th…
The analog nature of computing in Memristive crossbars poses significant issues due to various non-idealities such as: parasitic resistances, non-linear I-V characteristics of the device etc. The non-idealities can have a detrimental impact on the functionality i.e. computational accuracy of crossbars. Past works have explored modeling the non-idealities using analytical techniques. However, several non-idealities have data dependent behavior. This can not be captured using analytical (non data-dependent) models thereby, limiting their suitability in predicting application accuracy. To address…
The neuro-fuzzy system is network which resemble human-like operation of the naturally imprecise data and decision-making. This paper proposes implementation of the fundamental module of the neuro-fuzzy system - membership function (MF), realized as a analog electronic hardware. The memristive crossbar arrays are used as the architecture for proposed MF analog circuit. The main advantages of the memristive crossbar circuit are size, energy efficiency and fault tolerance compared to another analog alternatives. The conducted crossbar SPICE simulation with MS model of the memristor results confi…
Neuromorphic computing using post-CMOS technologies is gaining immense popularity due to its promising abilities to address the memory and power bottlenecks in von-Neumann computing systems. In this paper, we propose RESPARC - a reconfigurable and energy efficient architecture built-on Memristive Crossbar Arrays (MCA) for deep Spiking Neural Networks (SNNs). Prior works were primarily focused on device and circuit implementations of SNNs on crossbars. RESPARC advances this by proposing a complete system for SNN acceleration and its subsequent analysis. RESPARC utilizes the energy-efficiency of…
Reading several ReRAMs simultaneously in a neuromorphic circuit increases power consumption and limits scalability. Applying small inference read pulses is a vain attempt when offset voltages of the read-out circuit are decisively more. This paper presents an experimental validation of a three-stage calibration scheme to calibrate the DC offset voltage across the rows of the memristive crossbar. The proposed method is based on biasing the body terminal of one of the differential pair MOSFETs of the buffer through a series of cascaded resistor banks arranged in three stages: coarse, fine and fi…
Implementation of Neuromorphic Systems using post Complementary Metal-Oxide-Semiconductor (CMOS) technology based Memristive Crossbar Array (MCA) has emerged as a promising solution to enable low-power acceleration of neural networks. However, the recent trend to design Deep Neural Networks (DNNs) for achieving human-like cognitive abilities poses significant challenges towards the scalable design of neuromorphic systems (due to the increase in computation/storage demands). Network pruning [7] is a powerful technique to remove redundant connections for designing optimally connected (maximally …
AutoGMap: Learning to Map Large-scale Sparse Graphs on Memristive Crossbars
Zhejiang Lab（之江实验室）；University of Electronic Science and Technology of China（电子科技大学）；Australian AI Institute（澳大利亚人工智能研究所）；University of Technology Sydney（悉尼科技大学）；Chengdu University（成都大学）；Hamad Bin Khalifa University（哈迈德·本·哈利法大学）；Texas A & M University at Qatar（得克萨斯农工大学卡塔尔分校）
The rapidly expanding hardware-intrinsic security primitives are aimed at addressing significant security challenges of a massively interconnected world in the age of information technology. The main idea of such primitives is to employ instance-specific process-induced variations in electronic hardware as a source of cryptographic data. Among the emergent technologies, memristive devices provide unique opportunities for security applications due to the underlying stochasticity in their operation. Herein, we report a prototype of a robust, dense, and reconfigurable physical unclonable function…
In-Memory Computing (IMC) hardware using Memristive Crossbar Arrays (MCAs) are gaining popularity to accelerate Deep Neural Networks (DNNs) since it alleviates the "memory wall" problem associated with von-Neumann architecture. The hardware efficiency (energy, latency and area) as well as application accuracy (considering device and circuit non-idealities) of DNNs mapped to such hardware are co-dependent on network parameters, such as kernel size, depth etc. and hardware architecture parameters such as crossbar size. However, co-optimization of both network and hardware parameters presents a c…
The memristive crossbar aims to implement analog weighted neural network, however, the realistic implementation of such crossbar arrays is not possible due to limited switching states of memristive devices. In this work, we propose the design of an analog deep neural network with binary weight update through backpropagation algorithm using binary state memristive devices. We show that such networks can be successfully used for image processing task and has the advantage of lower power consumption and small on-chip area in comparison with digital counterparts. The proposed network was benchmark…
Data-intensive applications are poised to benefit directly from processing-in-memory platforms, such as memristive Memory Processing Units, which allow leveraging data locality and performing stateful logic operations. Developing design automation flows for such platforms is a challenging and highly relevant research problem. In this work, we investigate the problem of minimizing delay under arbitrary area constraint for MAGIC-based in-memory computing platforms. We propose an end-to-end area constrained technology mapping framework, CONTRA. CONTRA uses Look-Up Table(LUT) based mapping of the …
Despite all the progress of semiconductor integrated circuit technology, the extreme complexity of the human cerebral cortex makes the hardware implementation of neuromorphic networks with a comparable number of devices exceptionally challenging. One of the most prospective candidates to provide comparable complexity, while operating much faster and with manageable power dissipation, are so-called CrossNets based on hybrid CMOS/memristor circuits. In these circuits, the usual CMOS stack is augmented with one or several crossbar layers, with adjustable two-terminal memristors at each crosspoint…
Multi-Level Resistive Synapses for On-Chip Neural Networks: A Physics-Based Design of a Memristive Crossbar Fabric with Quasi-Continuous Conductance States
An adaptive inference method for crossbar (AIDX) is presented based on an optimization scheme for adjusting the duration and amplitude of input voltage pulses. AIDX minimizes the long-term effects of memristance drift on artificial neural network accuracy. The sub-threshold behavior of memristor has been modeled and verified by comparing with fabricated device data. The proposed method has been evaluated by testing on different network structures and applications, e.g., image reconstruction and classification tasks. The results showed an average of 60% improvement in convolutional neural netwo…
In the last decade, the interest to emulation of the functionality and structure of the human brain to solve the problems related to image processing and pattern recognition, especially using to Artificial Neural Network (ANN), has increased. Since the capability of ANN to compute at high-speed has been proven to be very useful for various computational problems. One of the simple ANN models is perceptron. Since the perceptron is the basic form of a neural network, the efficient implementation of analog activation functions is required. As various works introduce the design of sigmoid and tang…
Memristor-based crossbar arrays represent a promising emerging memory technology to replace conventional memories by offering a high density and enabling computing-in-memory (CIM) paradigms. While analog computing provides the best performance, non-idealities and ADC/DAC conversion limit memristor-based CIM. Logic-in-Memory (LIM) presents another flavor of CIM, in which the memristors are used in a binary manner to implement logic gates. Since binary neural networks (BNNs) use binary logic gates as the dominant operation, they can benefit from the massively parallel execution of binary operati…
This paper proposes the implementation of programmable threshold logic gate (TLG) crossbar array based on modified TLG cells for high speed processing and computation. The proposed TLG array operation does not depend on input signal and time pulses, comparing to the existing architectures. The circuit is implemented using TSMC $180nm$ CMOS technology. The on-chip area and power dissipation of the simulated $3\times 4$ TLG array is $1463 μm^2$ and $425 μW$, respectively.
We experimentally demonstrate classification of 4x4 binary images into 4 classes, using a 3-layer mixed-signal neuromorphic network ("MLP perceptron"), based on two passive 20x20 memristive crossbar arrays, board-integrated with discrete CMOS components. The network features 10 hidden-layer and 4 output-layer analog CMOS neurons and 428 metal-oxide memristors, i.e. is almost an order of magnitude more complex than any previously reported functional memristor circuit. Moreover, the inference operation of this classifier is performed entirely in the integrated hardware. To deal with larger cross…
The University of Hong Kong（香港大学）；Hewlett Packard Labs, Hewlett Packard Enterprise（慧与（HPE）惠普实验室）；University of Notre Dame（圣母大学）；Forschungszentrum Jülich GmbH（于利希研究中心）；RWTH Aachen University（亚琛工业大学）
Lifelong on-device learning is a key challenge for machine intelligence, and this requires learning from few, often single, samples. Memory augmented neural network has been proposed to achieve the goal, but the memory module has to be stored in an off-chip memory due to its size. Therefore the practical use has been heavily limited. Previous works on emerging memory-based implementation have difficulties in scaling up because different modules with various structures are difficult to integrate on the same chip and the small sense margin of the content addressable memory for the memory module …
Analog crossbar architectures for accelerating neural network training and inference have made tremendous progress over the past several years. These architectures are ideal for dense layers with fewer than roughly a thousand neurons. However, for large sparse layers, crossbar architectures are highly inefficient. A new hardware architecture, dubbed the MN3 (Memristive Nanowire Neural Network), was recently described as an efficient architecture for simulating very wide, sparse neural network layers, on the order of millions of neurons per layer. The MN3 utilizes a high-density memristive nano…
Memristive crossbars can efficiently implement Binarized Neural Networks (BNNs) wherein the weights are stored in high-resistance states (HRS) and low-resistance states (LRS) of the synapses. We propose SwitchX mapping of BNN weights onto ReRAM crossbars such that the impact of crossbar non-idealities, that lead to degradation in computational accuracy, are minimized. Essentially, SwitchX maps the binary weights in such manner that a crossbar instance comprises of more HRS than LRS synapses. We find BNNs mapped onto crossbars with SwitchX to exhibit better robustness against adversarial attack…
Adversarial input detection has emerged as a prominent technique to harden Deep Neural Networks(DNNs) against adversarial attacks. Most prior works use neural network-based detectors or complex statistical analysis for adversarial detection. These approaches are computationally intensive and vulnerable to adversarial attacks. To this end, we propose DetectX - a hardware friendly adversarial detection mechanism using hardware signatures like Sum of column Currents (SoI) in memristive crossbars (XBar). We show that adversarial inputs have higher SoI compared to clean inputs. However, the differe…
We present a fully memristive spiking neural network (MSNN) consisting of novel memristive neurons trained using the backpropagation through time (BPTT) learning rule. Gradient descent is applied directly to the memristive integrated-and-fire (MIF) neuron designed using analog SPICE circuit models, which generates distinct depolarization, hyperpolarization, and repolarization voltage waveforms. Synaptic weights are trained by BPTT using the membrane potential of the MIF neuron model and can be processed on memristive crossbars. The natural spiking dynamics of the MIF neuron model are fully dif…
Nazarbayev University（纳扎尔巴耶夫大学）；King Abdullah University of Science and Technology（阿卜杜拉国王科技大学）
The on-chip implementation of learning algorithms would speed-up the training of neural networks in crossbar arrays. The circuit level design and implementation of backpropagation algorithm using gradient descent operation for neural network architectures is an open problem. In this paper, we proposed the analog backpropagation learning circuits for various memristive learning architectures, such as Deep Neural Network (DNN), Binary Neural Network (BNN), Multiple Neural Network (MNN), Hierarchical Temporal Memory (HTM) and Long-Short Term Memory (LSTM). The circuit design and verification is d…
We propose an analog implementation of the transcendental activation function leveraging two spin-orbit torque magnetoresistive random-access memory (SOT-MRAM) devices and a CMOS inverter. The proposed analog neuron circuit consumes 1.8-27x less power, and occupies 2.5-4931x smaller area, compared to the state-of-the-art analog and digital implementations. Moreover, the developed neuron can be readily integrated with memristive crossbars without requiring any intermediate signal conversion units. The architecture-level analyses show that a fully-analog in-memory computing (IMC) circuit that us…
With the development of research on memristor, memristive neural networks (MNNs) have become a hot research topic recently. Because memristor can mimic the spike timing-dependent plasticity (STDP), the research on STDP based MNNs is rapidly increasing. However, although state-of-the-art works on STDP based MNNs have many applications such as pattern recognition, STDP mechanism brings relatively complex hardware framework and low processing speed, which block MNNs' hardware realization. A non-STDP based unsupervised MNN is constructed in this paper. Through the comparison with STDP method on th…
The first stage of tactile sensing is data acquisition using tactile sensors and the sensed data is transmitted to the central unit for neuromorphic computing. The memristive crossbars were proposed to use as synapses in neuromorphic computing but device intelligence at the sensor level are not investigated in literature. We propose the concept of Transistor Memristor Sensor (TMS)-crossbar by including sensor to memristor crossbar array configuration in the input layer of the neural network architecture. 2 possible cell configurations of TMS crossbar arrays: 1 Transistor 1 Memristor 1 Sensor (…
Recent years have seen a rapid rise of artificial neural networks being employed in a number of cognitive tasks. The ever-increasing computing requirements of these structures have contributed to a desire for novel technologies and paradigms, including memristor-based hardware accelerators. Solutions based on memristive crossbars and analog data processing promise to improve the overall energy efficiency. However, memristor nonidealities can lead to the degradation of neural network accuracy, while the attempts to mitigate these negative effects often introduce design trade-offs, such as those…
Recent breakthroughs in neuromorphic computing show that local forms of gradient descent learning are compatible with Spiking Neural Networks (SNNs) and synaptic plasticity. Although SNNs can be scalably implemented using neuromorphic VLSI, an architecture that can learn using gradient-descent in situ is still missing. In this paper, we propose a local, gradient-based, error-triggered learning algorithm with online ternary weight updates. The proposed algorithm enables online training of multi-layer SNNs with memristive neuromorphic hardware showing a small loss in the performance compared wit…
The implementation of analog neural network and online analog learning circuits based on memristive crossbar has been intensively explored in recent years. The implementation of various activation functions is important, especially for deep leaning neural networks. There are several implementations of sigmoid and tangent activation function, while the implementation of the neural networks with linear activation functions is an open problem. Therefore, this paper introduces a multilayer perceptron design with linear activation function. The temperature and noise analysis was performed. The perc…
Recent artificial neural network architectures improve performance and power dissipation by leveraging resistive devices to store and multiply synaptic weights with input data. Negative and positive synaptic weights are stored on the memristors of a reconfigurable crossbar array (MCA). Existing MCA-based neural network architectures use high power consuming voltage converters or operational amplifiers to generate the total synaptic current through each column of the crossbar array. This paper presents a low power MCA-based feedforward neural network architecture that uses a spintronic device p…
Memristive crossbars have become a popular means for realizing unsupervised and supervised learning techniques. In previous neuromorphic architectures with leaky integrate-and-fire neurons, the crossbar itself has been separated from the neuron capacitors to preserve mathematical rigor. In this work, we sought to simplify the design, creating a fast circuit that consumed significantly lower power at a minimal cost of accuracy. We also showed that connecting the neurons directly to the crossbar resulted in a more efficient sparse coding architecture, and alleviated the need to pre-normalize rec…
Neuromorphic computing systems are embracing memristors to implement high density and low power synaptic storage as crossbar arrays in hardware. These systems are energy efficient in executing Spiking Neural Networks (SNNs). We observe that long bitlines and wordlines in a memristive crossbar are a major source of parasitic voltage drops, which create current asymmetry. Through circuit simulations, we show the significant endurance variation that results from this asymmetry. Therefore, if the critical memristors (ones with lower endurance) are overutilized, they may lead to a reduction of the …
Acting as artificial synapses, two-terminal memristive devices are considered fundamental building blocks for the realization of artificial neural networks. Organized into large arrays with a top-down approach, memristive devices in conventional crossbar architecture demonstrated the implementation of brain-inspired computing for supervised and unsupervised learning. Alternative way using unconventional systems consisting of many interacting nano-parts have been proposed for the realization of biologically plausible architectures where the emergent behavior arises from a complexity similar to …
Spiking neural networks (SNNs) are being explored in an attempt to mimic brain's capability to learn and recognize at low power. Crossbar architecture with highly scalable Resistive RAM or RRAM array serving as synaptic weights and neuronal drivers in the periphery is an attractive option for SNN. Recognition (akin to reading the synaptic weight) requires small amplitude bias applied across the RRAM to minimize conductance change. Learning (akin to writing or updating the synaptic weight) requires large amplitude bias pulses to produce a conductance change. The contradictory bias amplitude req…
