Prominences in the solar atmosphere represent an intriguing and delicate balance of forces and thermodynamics in an evolving magnetic topology. How this relatively cool material comes to reside at coronal heights, and what drives its evolution prior to, during, and after its appearance remains an area full of open questions. We deliberately focus on the levitation-condensation scenario, where a coronal flux rope forms and eventually demonstrates in-situ condensations, revisiting it at extreme resolutions down to order 6 km in scale. We perform grid-adaptive numerical simulations in a 2.5D translationally invariant setup, where we can study the distribution of all metrics involved in advanced magnetohydrodynamic stability theory for nested flux rope equilibria. We quantify in particular Convective Continuum Instability (CCI), Thermal Instability (TI), baroclinicity, and mass-slipping metrics within a series of numerical simulations of prominences formed via levitation-condensation. Overall, we find that the formation and evolution of prominence condensations happens in a clearly defined sequence regardless of resolution or background field strength between 3 and 10 Gauss. The CCI governs the slow evolution of plasma prior to the formation of distinct condensations found to be driven by the TI. Evolution of the condensations towards the topological dips of the magnetic flux rope is a consequence of these condensations forming initially outside of pressure balance with their surroundings. From the baroclinicity distributions, smaller-scale rotational motions are inferred within forming and evolving condensations. Upon the complete condensation of a prominence `monolith', the slow descent of this plasma towards lower heights appears consistent with the mass-slippage mechanism driven by episodes of both local current diffusion and magnetic reconnection.
Prominences in the solar corona are hundredfold cooler and denser than their surroundings, with a total mass of 1.e13 up to 1.e15 g. Here we report on the first comprehensive simulations of three-dimensional, thermally and gravitationally stratified magnetic flux ropes, where in situ condensation to a prominence happens due to radiative losses. After a gradual thermodynamic adjustment, we witness a phase where runaway cooling happens while counter-streaming shearing flows drain off mass along helical field lines. After this drainage, a prominence-like condensation resides in concave upward fie…
The interiors of quiescent prominences are filled with turbulent flows. The evolution of upflow plumes, descending pillars, and vortex motions has been clearly detected in high-resolution observations. The Rayleigh-Taylor instability is thought to be a driver of such internal flows. Descending pillars are related to the mass budgets of prominences. There is a hypothesis of dynamic equilibrium where the mass drainage via descending pillars and the mass supply via radiative condensation are balanced to maintain the prominence mass; however, the background physics connecting the two different pro…
We propose a reconnection-condensation model in which topological change in a coronal magnetic field via reconnection triggers radiative condensation, thereby resulting in prominence formation. Previous observational studies have suggested that reconnection at a polarity inversion line of a coronal arcade field creates a flux rope that can sustain a prominence; however, they did not explain the origin of cool dense plasmas of prominences. Using three-dimensional magnetohydrodynamic simulations including anisotropic nonlinear thermal conduction and optically thin radiative cooling, we demonstra…
Imaging solar coronal condensation forming prominences was difficult in the past, a situation recently changed by Hinode and SDO. We present the first example observed with SDO/AIA, in which material gradually cools through multiple EUV channels in a transequatorial loop system that confines an earlier eruption. Nine hours later, this leads to eventual condensation at the dip of these loops, forming a moderate-size prominence of ~$10^{14}$ gram, to be compared to the characteristic $10^{15}$ gram mass of a CME. The prominence mass is not static but maintained by condensation at a high estimate…
We propose an in-situ formation model for inverse-polarity solar prominence and demonstrate it using self-consistent 2.5-dimensional magnetohydrodynamics simulations, including thermal conduction along magnetic fields and optically thin radiative cooling. The model enables us to form cool dense plasma clouds inside a flux rope by radiative condensation, which is regarded as an inverse-polarity prominence. Radiative condensation is triggered by changes in the magnetic topology, i.e., formation of the flux rope from the sheared arcade field, and by thermal imbalance due to the dense plasma trapp…
With this study, we aim to understand the nature of prominences, governed by their formation process. We use a state-of-the-art threaded prominence model within a dipped magnetic arcade. The non-ideal magnetohydrodynamic (MHD) equations are solved using the open-source MPI-AMRVAC MHD toolkit. Unlike many previous 1D models, we study the full 2D dynamics in a fixed-shaped arcade. This allows for sideways field deformations and cross-field thermodynamic coupling. To achieve a realistic setup we consider field-aligned thermal conduction, radiative cooling and heating, wherein the latter combines …
Prominences, or filaments, are a striking phenomenon in the solar atmosphere. Besides their own rich features and dynamics, they are related to many other activities, such as solar flares and coronal mass ejections (CMEs). In the past several years we have been investigating the prominence formation, oscillations, and eruptions through both data analysis and radiative hydrodynamic and magnetohydrodynamic (MHD) simulations. This paper reviews our progress on these topics, which includes: (1) With updated radiative cooling function, the coronal condensation becomes a little faster than previous …
Context: Magnetohydrodynamic thermal modes may play an important role in the formation, plasma condensation, and evolution of solar prominences. Unstable thermal modes due to unbalance between radiative losses and heating can lead to rapid plasma cooling and condensation. An accurate description of the radiative loss function is therefore crucial for this process. Aims: We study the stability of thermal modes in unbounded and uniform plasmas with properties akin to those in solar prominences. Effects due to partial ionization are taken into account. Three different parametrizations of the radi…
A solar filament is a dense cool condensation that is supported and thermally insulated by magnetic fields in the rarefied hot corona. Its evolution and stability, leading to either an eruption or disappearance, depend on its coupling with the surrounding hot corona through a thin transition region, where the temperature steeply rises. However, the heating and dynamics of this transition region remain elusive. We report extreme-ultraviolet observations of quiescent filaments from the Solar Dynamics Observatory that reveal prominence spicules propagating through the transition region of the fil…
Solar prominences are long-lived cool and dense plasma curtains in the hot and rarefied outer solar atmosphere or corona. The physical mechanism responsible for their formation and especially for their internal plasma circulation has been uncertain for decades. The observed ubiquitous down flows in quiescent prominences are difficult to interpret as plasma with high conductivity seems to move across horizontal magnetic field lines. Here we present three-dimensional numerical simulations of prominence formation and evolution in an elongated magnetic flux rope as a result of in-situ plasma conde…
We investigate the process of formation and subsequent evolution of prominence plasma in a filament channel and its overlying arcade. We construct a three-dimensional time-dependent model of an intermediate quiescent prominence. We combine the magnetic field structure with one-dimensional independent simulations of many flux tubes, of a three-dimensional sheared double arcade, in which the thermal nonequilibrium process governs the plasma evolution. We have found that the condensations in the corona can be divided into two populations: threads and blobs. Threads are massive condensations that …
Aims. We begin by exploring the influence of two classes of commonly adopted heating models on the formation behaviour of solar prominences. These models consider either an exponential variation dependent on height alone, or local density and magnetic field conditions. We highlight and address some of the limitations inherent to these early approximations by proposing a new, dynamic 2D flux rope heating model that qualitatively accounts for the 3D topology of the twisted flux rope field. Methods. We performed 2.5D grid-adaptive numerical simulations of prominence formation via the levitation-c…
We present numerical simulations in 2.5D settings where large scale prominences form in situ out of coronal condensation in magnetic dips, in close agreement with early as well as recent reporting of `funnel prominences'. Our simulation uses full thermodynamic MHD with anisotropic thermal conduction, optically thin radiative losses, and parametrized heating as main ingredients to establish a realistic arcade configuration from chromosphere to corona. The chromospheric evaporation from especially transition region heights ultimately causes thermal instability and we witness the growth of a prom…
We carry out magnetohydrodynamic (MHD) simulations of the quasi-static evolution and eruption of a twisted coronal flux rope under a coronal streamer built up by an imposed flux emergence at the lower boundary. The MHD model incorporates a simple empirical coronal heating, optically thin radiative cooling, and field aligned thermal conduction, and thus allows the formation of prominence condensations. We find that during the quasi-static evolution, prominence/filament condensations of an elongated, sigmoid morphology form in the dips of the significantly twisted field lines of the emerged flux…
We present magnetohydrodynamic (MHD) simulations of the evolution from quasi-equilibrium to eruption of a prominence-forming twisted coronal flux rope under a coronal streamer. We have compared the cases with and without the formation of prominence condensations, and the case where prominence condensations form but we artificially initiate the draining of the prominence. We find that the prominence weight has a significant effect on the stability of the flux rope, and can significantly increase the loss-of-equilibrium height. The flux rope can be made to erupt earlier by initiating draining of…
Starting from a realistically sheared magnetic arcade connecting chromospheric, transition region to coronal plasma, we simulate the in-situ formation and sustained growth of a quiescent prominence in the solar corona. Contrary to previous works, our model captures all phases of the prominence formation, including the loss of thermal equilibrium, its successive growth in height and width to macroscopic dimensions, and the gradual bending of the arched loops into dipped loops, as a result of the mass accumulation. Our 2.5-dimensional, fully thermodynamically and magnetohydrodynamically consiste…
We present magnetohydrodynamic simulation of the evolution from quasi-equilibrium to onset of eruption of a twisted, prominence-forming coronal magnetic flux rope underlying a corona streamer. The flux rope is built up by an imposed flux emergence at the lower boundary. During the quasi-static phase of the evolution, we find the formation of a prominence-cavity system with qualitative features resembling observations, as shown by the synthetic SDO/AIA EUV images with the flux rope observed above the limb viewed nearly along its axis. The cavity contains substructures including ``U''-shaped or …
Several mechanisms have been proposed to account for the formation of solar prominences or filaments, among which direct injection and evaporation-condensation models are the two most popular ones. In the direct injection model, cold plasma is ejected from the chromosphere into the corona along magnetic field lines; In the evaporation-condensation model, the cold chromospheric plasma is heated to over a million degrees and is evaporated into the corona, where the accumulated plasma finally reaches thermal instability or non-equilibrium so as to condensate to cold prominences. In this paper, we…
Mass loss rates for the tenuous, hot winds of cool stars are extremely difficult to measure, yet they are a crucial ingredient in the stars' rotational evolution. We present a new method for measuring these mass loss rates in young, rapidly-rotating stars. These stars are known to support systems of "slingshot prominences" fed by hot wind material flowing up from the stellar surface into the summits of closed magnetic loop structures. The material gathers and cools near the co-rotation radius until its density becomes large enough that it is visible as a transient absorption feature in the hyd…
Coronal rain clumps and prominence knots are dense condensations with chromospheric to transition region temperatures that fall down in the much hotter corona. Their typical speeds are in the range 30--150~km~s$^{-1}$ and of the order of 10--30~km~s$^{-1}$, respectively, i.e., they are considerably smaller than free fall velocities. These cold blobs contain a mixture of ionized and neutral material that must be dynamically coupled in order to fall together, as observed. We investigate this coupling by means of hydrodynamic simulations in which the coupling arises from the friction between ions…
To understand the formation of quiescent solar prominences, the origin of their magnetic field structures, i.e., magnetic flux ropes (MFRs), must be revealed. We use three-dimensional magnetofriction simulations in a spherical subdomain to investigate the role of typical supergranular motions in the long-term formation of a prominence magnetic field. Time-dependant horizontal supergranular motions with and without the effect of Coriolis force are simulated on the solar surface via Voronoi tessellation. The vortical motions by the Coriolis effect at boundaries of supergranules inject magnetic h…
The physical connection among and formation mechanisms of various components of the prominence-horn cavity system remain elusive. Here we present observations of such a system, focusing on a section of the prominence that rises and separates gradually from the main body. This forms a configuration sufficiently simple to yield clues to the above issues. It is characterized by embedding horns, oscillations, and a gradual disappearance of the separated material. The prominence-horn structure exhibits a large amplitude longitudinal oscillation with a period of ~150 minutes and an amplitude of ~30 …
Context. Prominence seismology exploits our knowledge of the linear eigenoscillations for representative magnetohydro- dynamic models of filaments. To date, highly idealized models for prominences have been used, especially with respect to the overall magnetic configurations. Aims. We initiate a more systematic survey of filament wave modes, where we consider full multi-dimensional models with twisted magnetic fields representative of the surrounding magnetic flux rope. This requires the ability to compute accurate 2.5 dimensional magnetohydrodynamic equilibria that balance Lorentz forces, gra…
Starting from accurate MHD flux rope equilibria containing prominence condensations, we initiate a systematic survey of their linear eigenoscillations. To quantify the full spectrum of linear MHD eigenmodes, we require knowledge of all flux-surface localized modes, charting out the continuous parts of the MHD spectrum. We combine analytical and numerical findings for the continuous spectrum for realistic prominence configurations. The equations governing all eigenmodes for translationally symmetric, gravitating equilibria containing an axial shear flow, are analyzed, along with their flux-surf…
Using three-dimensional magnetohydrodynamic (MHD) simulations, we investigate the eruption of coronal flux ropes underlying coronal streamers and the development of a prominence eruption. We initialize a quasi-steady solution of a coronal helmet streamer, into which we impose at the lower boundary the slow emergence of a part of a twisted magnetic torus. As a result a quasi-equilibrium flux rope is built up under the streamer. With varying sizes of the streamer and the different length and total twist of the emerged flux rope, we found different scenarios for the evolution from quasi-equilibri…
We present numerical simulations in 3D settings where coronal rain phenomena take place in a magnetic configuration of a quadrupolar arcade system. Our simulation is a magnetohydrodynamic simulation including anisotropic thermal conduction, optically thin radiative losses, and parametrised heating as main thermodynamical features to construct a realistic arcade configuration from chromospheric to coronal heights. The plasma evaporation from chromospheric and transition region heights eventually causes localised runaway condensation events and we witness the formation of plasma blobs due to the…
We report the first analyses of SDO/AIA observations of the formation of a quiescent polar crown prominence in a coronal cavity. The He II 304 Å (log T_{max} ~ 4.8 K) data show both the gradual disappearance of the prominence due to vertical drainage and lateral transport of plasma followed by the formation of a new prominence some 12 hours later. The formation of the prominence is preceded by the appearance of a bright emission "cloud" in the central region of the coronal cavity. The peak brightness of the cloud progressively shifts in time from the Fe XIV 211 Å channel, through the Fe XII 19…
Non-gravitationally induced condensations are observed in many astrophysical environments. Such structures are formed due to energy loss by optically thin radiative emission. Instead of solving the full radiative transfer equations, precomputed cooling curves are typically used in numerical simulations. In the literature, there exists a wide variety of cooling curves and they are quite often used as unquestionable ingredients. We determine the effect of the optically thin cooling curves on the formation and evolution of condensations. We perform a case study using thermal instability as a mech…
We report a new, plasmoid-fed scenario for the formation of an eruptive prominence (PF$^2$), involving reconnection and condensation. We use grid-adaptive resistive two-and-a-half-dimensional magnetohydrodynamic (MHD) simulations in a chromosphere-to-corona setup to resolve this plasmoid-fed scenario. We study a pre-existing flux rope (FR) in the low corona that suddenly erupts due to catastrophe, which also drives a fast shock above the erupting FR. A current sheet (CS) forms underneath the erupting FR, with chromospheric matter squeezed into it. The plasmoid instability occurs and multiple m…
Coronal rain consists of cool plasma condensations formed in coronal loops as a result of thermal instability. The standard models of coronal rain formation assume that the heating is quasi-steady and localised at the coronal loop footpoints. We present an observation of magnetic reconnection in the corona and the associated impulsive heating triggering formation of coronal rain condensations. We analyse combined SDO/AIA and IRIS observations of a coronal rain event following a reconnection between threads of a low-lying prominence flux rope and surrounding coronal field lines. The reconnectio…
Multi-wavelength synthesis of a flux rope-trapped mini-prominence eruption and post-flare coronal rain
Instituto de Astrofísica de Canarias（加那利天体物理研究所）；Universidad de La Laguna（拉古纳大学）；University of Helsinki（赫尔辛基大学）；Leibniz-Institut für Astrophysik Potsdam (AIP)（波茨坦莱布尼茨天体物理研究所）；NASA Goddard Space Flight Center（美国宇航局戈达德太空飞行中心）；Northumbria University（诺森比亚大学）
Plasma loops or plumes rooted in sunspot umbrae often harbor downflows with speeds of 100 km/s. These downflows are supersonic at transition region temperatures of 0.1 MK. The source of these flows is not well understood. We aim to investigate the source of sunspot supersonic downflows (SSDs) in AR 12740 using simultaneous spectroscopic and imaging observations. We identified SSD events from multiple raster scans of a sunspot by the Interface Region Imaging Spectrograph, and calculated the electron densities, mass fluxes and velocities of these SSDs. The EUV images provided by the AIA onboard …
In flare-relevant current sheets, tearing instability may trigger explosive reconnection and plasmoid formation. We explore how the thermal and tearing modes reinforce each other in the fragmentation of a current sheet in the solar corona through an explosive reconnection process, characterized by the formation of plasmoids which interact and trap condensing plasma. We use a resistive magnetohydrodynamic (MHD) simulation of a 2D current layer, incorporating the non-adiabatic effects of optically thin radiative energy loss and background heating using \texttt{MPI-AMRVAC}. Our parametric survey …
