The physical connection among and formation mechanisms of various components of the prominence-horn cavity system remain elusive. Here we present observations of such a system, focusing on a section of the prominence that rises and separates gradually from the main body. This forms a configuration sufficiently simple to yield clues to the above issues. It is characterized by embedding horns, oscillations, and a gradual disappearance of the separated material. The prominence-horn structure exhibits a large amplitude longitudinal oscillation with a period of ~150 minutes and an amplitude of ~30 Mm along the trajectory defined by the concave horn structure. The horns also experience a simultaneous transverse oscillation with a much smaller amplitude (~3 Mm) and shorter period (~10-15 minutes), likely representative of a global mode of the large-scale magnetic structure. The gradual disappearance of the structure indicates that the horn, an observational manifestation of the field-aligned transition region separating the cool and dense prominence from the hot and tenuous corona, is formed due to the heating and diluting process of the central prominence mass, while most previous studies suggest that it is the opposite process, i.e., the cooling and condensation of coronal plasmas, to form the horn. This study also demonstrates how the prominence transports magnetic flux to the upper corona, a process essential for the gradual build-up of pre-eruption magnetic energy.
A prevalent but untested paradigm is often used to describe the prominence-cavity system: the cavity is under-dense because it is evacuated by supplying mass to the condensed prominence. The thermal non-equilibrium (TNE) model of prominence formation offers a theoretical framework to predict the thermodynamic evolution of the prominence and the surrounding corona. We examine the evidence for a prominence-cavity connection by comparing the TNE model with diagnostics of dynamic extreme ultraviolet emission (EUV) surrounding the prominence, specifically prominence horns. Horns are correlated exte…
Prominences and cavities are ubiquitously observed together, but the physical link between these disparate structures has not been established. We address this issue by using dynamic emission in the extreme ultraviolet (EUV) to probe the connections of these structures. The SDO/AIA observations show that the cavity exhibits excessive emission variability compared to the surrounding quiet-sun streamer, particularly in the 171Åbandpass. We find that this dynamic emission takes the form of coherent loop-like brightening structures which emanate from the prominence into the central cavity. The geo…
Prominences in the solar corona are hundredfold cooler and denser than their surroundings, with a total mass of 1.e13 up to 1.e15 g. Here we report on the first comprehensive simulations of three-dimensional, thermally and gravitationally stratified magnetic flux ropes, where in situ condensation to a prominence happens due to radiative losses. After a gradual thermodynamic adjustment, we witness a phase where runaway cooling happens while counter-streaming shearing flows drain off mass along helical field lines. After this drainage, a prominence-like condensation resides in concave upward fie…
Starting from a realistically sheared magnetic arcade connecting chromospheric, transition region to coronal plasma, we simulate the in-situ formation and sustained growth of a quiescent prominence in the solar corona. Contrary to previous works, our model captures all phases of the prominence formation, including the loss of thermal equilibrium, its successive growth in height and width to macroscopic dimensions, and the gradual bending of the arched loops into dipped loops, as a result of the mass accumulation. Our 2.5-dimensional, fully thermodynamically and magnetohydrodynamically consiste…
Several mechanisms have been proposed to account for the formation of solar prominences or filaments, among which direct injection and evaporation-condensation models are the two most popular ones. In the direct injection model, cold plasma is ejected from the chromosphere into the corona along magnetic field lines; In the evaporation-condensation model, the cold chromospheric plasma is heated to over a million degrees and is evaporated into the corona, where the accumulated plasma finally reaches thermal instability or non-equilibrium so as to condensate to cold prominences. In this paper, we…
Prominences, or filaments, are a striking phenomenon in the solar atmosphere. Besides their own rich features and dynamics, they are related to many other activities, such as solar flares and coronal mass ejections (CMEs). In the past several years we have been investigating the prominence formation, oscillations, and eruptions through both data analysis and radiative hydrodynamic and magnetohydrodynamic (MHD) simulations. This paper reviews our progress on these topics, which includes: (1) With updated radiative cooling function, the coronal condensation becomes a little faster than previous …
A solar filament is a dense cool condensation that is supported and thermally insulated by magnetic fields in the rarefied hot corona. Its evolution and stability, leading to either an eruption or disappearance, depend on its coupling with the surrounding hot corona through a thin transition region, where the temperature steeply rises. However, the heating and dynamics of this transition region remain elusive. We report extreme-ultraviolet observations of quiescent filaments from the Solar Dynamics Observatory that reveal prominence spicules propagating through the transition region of the fil…
Solar prominences are long-lived cool and dense plasma curtains in the hot and rarefied outer solar atmosphere or corona. The physical mechanism responsible for their formation and especially for their internal plasma circulation has been uncertain for decades. The observed ubiquitous down flows in quiescent prominences are difficult to interpret as plasma with high conductivity seems to move across horizontal magnetic field lines. Here we present three-dimensional numerical simulations of prominence formation and evolution in an elongated magnetic flux rope as a result of in-situ plasma conde…
We present numerical simulations in 2.5D settings where large scale prominences form in situ out of coronal condensation in magnetic dips, in close agreement with early as well as recent reporting of `funnel prominences'. Our simulation uses full thermodynamic MHD with anisotropic thermal conduction, optically thin radiative losses, and parametrized heating as main ingredients to establish a realistic arcade configuration from chromosphere to corona. The chromospheric evaporation from especially transition region heights ultimately causes thermal instability and we witness the growth of a prom…
Many prominences are supported by magnetic flux ropes. One important question is how we can determine whether the flux rope is weakly-twisted or strongly-twisted. In this paper, we attempted to check whether prominences supported by weakly-twisted and strongly-twisted flux ropes can manifest different features so that we might distinguish the two types of magnetic structures by their appearance. We performed pseudo three-dimensional simulations of two magnetic flux ropes with different twists. We found that the resulting two prominences differ in many aspects. The prominence supported by a wea…
We investigate the magnetic reconnection in an MHD simulation of a coronal magnetic flux rope (MFR) confined by a helmet streamer, where a prominence-cavity system forms. This system includes a hot cavity surrounding a prominence with prominence horns and a central hot core above the prominence. The evolution of the system from quasi-equilibrium to eruption can be divided into four phases: quasi-static, slow rise, fast rise, and propagation phases. The emerged MFR initially stays quasi-static and magnetic reconnection occurs at the overlying high-Q (squashing factor) apex region, which gradual…
We present an investigation of the polar crown prominence that erupted on 2012 March 12. This prominence is observed at the southeast limb by SDO/AIA (end-on view) and displays a quasi vertical-thread structure. Bright U-shape/horn-like structure is observed surrounding the upper portion of the prominence at 171 angstrom before the eruption and becomes more prominent during the eruption. The disk view of STEREO-B shows that this long prominence is composed of a series of vertical threads and displays a half loop-like structure during the eruption. We focus on the magnetic support of the promin…
We study the damping of longitudinal oscillations of a prominence thread caused by the mass accretion. In this model we considered a thin curved magnetic tube filled with the plasma. The parts of the tube at the two sides of the thread are filled with hot rarefied plasma. We assume that there are flows of rarefied plasma toward the thread caused by the plasma evaporation at the magnetic tube footpoints. Our main assumption is that the hot plasma is instantaneously accommodated by the thread when it arrives at the thread, and its temperature and density become equal to those of the thread. Then…
Quasi-constant heating at the footpoints of loops leads to evaporation and condensation cycles of the plasma: thermal non-equilibrium (TNE). This phenomenon is believed to play a role in the formation of prominences and coronal rain. However, it is often discarded to be involved in the heating of warm loops as the models do not reproduce observations. Recent simulations have shown that these inconsistencies with observations may be due to oversimplifications of the geometries of the models. In addition, our recent observations reveal that long-period intensity pulsations (several hours) are co…
In this paper, we report our multiwavelength observations of the vertical oscillation of a coronal cavity on 2011 March 16. The elliptical cavity with an underlying horn-like quiescent prominence was observed by the Atmospheric Imaging Assembly (AIA) on board the \textit{Solar Dynamics Observatory} (\textit{SDO}). The width and height of the cavity are 150$\arcsec$ and 240$\arcsec$, and the centroid of cavity is 128$\arcsec$ above the solar surface. At $\sim$17:50 UT, a C3.8 two-ribbon flare took place in active region 11169 close to the solar western limb. Meanwhile, a partial halo coronal ma…
A prominence eruption on 7 June 2011 produced spectacular curtains of plasma falling through the lower corona. At the solar surface they created an incredible display of extreme ultraviolet brightenings. The aim is to identify and analyze some of the local instabilities which produce structure in the falling plasma. The structures were investigated using SDO/AIA 171A and 193A images in which the falling plasma appeared dark against the bright coronal emission. Several instances of the Rayleigh-Taylor instability were investigated. In two cases the Alfven velocity associated with the dense plas…
We analyze the observations from Solar TErrestrial RElations Observatory (STEREO)-A\&B/COR-1 of an eruptive prominence in the intermediate corona on 7 June 2011 at 08:45 UT, which consists of magnetic Rayleigh-Taylor (MRT) unstable plasma segments. Its upper northward segment shows spatio-temporal evolution of MRT instability in form of finger structures upto the outer corona and low inter-planetary space. Using method of Dolei et al.(2014), It is estimated that the density in each bright finger is greater than corresponding dark region lying below of it in the surrounding intermediate corona.…
Solar filaments/prominences are one of the most common features in the corona, which may lead to energetic coronal mass ejections (CMEs) and flares when they erupt. Filaments are about one hundred times cooler and denser than the coronal material, and physical understanding of their material origin remains controversial. Two types of scenarios have been proposed: one argues that the filament plasma is brought into the corona from photosphere or chromosphere through a siphon or evaporation/injection process, while the other suggests that the material condenses from the surrounding coronal plasm…
We present numerical simulations in 3D settings where coronal rain phenomena take place in a magnetic configuration of a quadrupolar arcade system. Our simulation is a magnetohydrodynamic simulation including anisotropic thermal conduction, optically thin radiative losses, and parametrised heating as main thermodynamical features to construct a realistic arcade configuration from chromospheric to coronal heights. The plasma evaporation from chromospheric and transition region heights eventually causes localised runaway condensation events and we witness the formation of plasma blobs due to the…
