Droplets move on substrates with a spatio-temporal wettability pattern as generated, for example, on light-switchable surfaces. To study such cases, we implement the boundary-element method to solve the governing Stokes equations for the fluid flow field inside and on the surface of a droplet and supplement it by the Cox-Voinov law for the dynamics of the contact line. Our approach reproduces the relaxation of an axisymmetric droplet in experiments, which we initiate by instantaneously switching the uniform wettability of a substrate quantified by the equilibrium contact angle. In a step profile of wettability the droplet moves towards higher wettability. Using a feedback loop to keep the distance or offset between step and droplet center constant, induces a constant velocity with which the droplet surfes on the wettability step. We analyze the velocity in terms of droplet offset and step width for typical wetting parameters. Moving instead the wettability step with constant speed, we determine the maximally possible droplet velocities under various conditions. The observed droplet speeds agree with the values from the feedback study for the same positive droplet offset.
Droplet motion over a surface with wettability gradient has been simulated using molecular dynamics (MD) simulation to highlight the underlying physics. GROMACS and Visual Molecular Dynamics (VMD) were used for simulation and intermittent visualization of the droplet configuration respectively. The simulations mimic experiments in a comprehensive manner wherein micro-sized droplets are propelled by surface wettability gradient against a number of retarding forces. The liquid-wall Lennard-Jones interaction parameter and the substrate temperature were varied to explore their effects on the three…
We demonstrate \textit{bendotaxis}, a novel mechanism for droplet self-transport at small scales. A combination of bending and capillarity in a thin channel causes a pressure gradient that, in turn, results in the spontaneous movement of a liquid droplet. Surprisingly, the direction of this motion is always the same, regardless of the wettability of the channel. We use a combination of experiments at a macroscopic scale and a simple mathematical model to study this motion, focussing in particular on the time scale associated with the motion. We suggest that \emph{bendotaxis} may be a useful me…
In recent decades novel solid substrates have been designed which change their wettability in response to light or an electrostatic field. Here, we investigate a droplet on substrates with oscillating uniform wettability by varying minimium and maximum contact angles and frequency. To simulate this situation, we use our previous work [Grawitter and Stark, Soft Matter 17, 2454 (2021)], where we implemented the boundary element method in combination with the Cox-Voinov law for the contact-line velocity, to determine the fluid flow inside a droplet. After a transient regime the droplet performs s…
An asymptotic theory is developed for a moving drop driven by a wettability gradient. We distinguish the mesoscale where an exact solution is known for the properly simplified problem. This solution is matched at both -- the advancing and the receding side -- to respective solutions of the problem on the microscale. On the microscale the velocity of movement is used as the small parameter of an asymptotic expansion. Matching gives the droplet shape, velocity of movement as a function of the imposed wettability gradient and droplet volume.
The directional movement and rebound behaviours of two droplets simultaneously impacting a designed flat surface with wettability difference is investigated based on the three-dimensional multi-relaxation-time pseudopotential lattice Boltzmann model. The effects of several factors, such as wettability difference, Weber number and droplet spacing on the directional movement and rebound behaviours are investigated in detail. The numerical results show that the unbalanced Young 's force caused by the wetting difference will cause the droplets to rebound or migrate laterally toward to the side wit…
Effects of substrate temperature, substrate wettability and particles concentration are experimentally investigated for evaporation of a sessile water droplet containing colloidal particles. Time-varying droplet shapes and temperature of the liquid-gas interface are measured using high-speed visualization and infrared thermography, respectively. The motion of the particles inside the evaporating droplet is qualitatively visualized by an optical microscope and profile of final particle deposit is measured by an optical profilometer. On a non-heated hydrophilic substrate, a ring-like deposit for…
Dynamic Wettability Modulation of Textured, Soft and LIS Interfaces Using Electrowetting
School of Mechanical Sciences, Indian Institute of Technology (IIT) Goa（印度理工学院果阿分校机械科学学院）；Department of Mechanical Engineering, Indian Institute of Technology, Kharagpur（印度理工学院卡拉格普尔分校机械工程系）
Surface wettability has a huge influence on its functional properties. For example, to minimize smudging, surfaces should be able to repel oil droplets. To quantify surface wettability, the most common approach is to measure the contact angles of a liquid droplet on the surface. While well-established and relatively easy to perform, contact angle measurements are crude and imprecise; moreover, they cannot spatially resolve surface heterogeneities that can contribute to surface fouling. To address these shortcomings, we report on using an Atomic Force Microscopy (AFM) technique to quantitativel…
The influence of miscibility and liquid wettability during droplet impact onto thin wall films is investigated experimentally. Despite similar liquid properties and impact conditions, differences in the splashing limit, the crown extension and the duration of the ascending phase are observed. These differences are related to the interfacial tension of the droplet/wall-film liquid pairs, which is linked to their miscibility and wettability. More precisely, by calculating the crown surface energy, we show that the energy stored in the interface between droplet and wall-film (if any) is not negli…
Would a raindrop impacting on a coarse beach behave differently from that impacting on a desert of fine sand? We study this question by a series of model experiments, where the packing density of the granular target, the wettability of individual grains, the grain size, the impacting liquid, and the impact speed are varied. We find that by increasing the grain size and/or the wettability of individual grains the maximum droplet spreading undergoes a transition from a capillary regime towards a viscous regime, and splashing is suppressed. The liquid-grain mixing is discovered to be the underlyi…
Experimental investigations were carried out to elucidate the role of surface wettability and inclination on the post impact dynamics of droplets. Maximum spreading diameter and spreading time were found to decrease with increasing inclination angle and normal Weber number for superhydrophobic surfaces. The experiments on SH surfaces were found to be in excellent agreement with an existing analytical model, incorporated with the modifications for the oblique impact conditions. Energy ratios and elongation factor were also measured for different inclination angles. On inclined SH surfaces, diff…
How to make small liquid droplets move spontaneously and directionally on solid surfaces is a challenge in lab-on-chip technologies, DNA analysis, and heat exchangers. The best-known mechanism, a wettability gradient, does not move droplets rapidly enough for most purposes and cannot move droplets smaller than a critical size defined by the contact angle hysteresis. Here we report on a mechanism using curvature gradients, which we show is particularly effective at accelerating small droplets, and works for both hydrophilic and hydrophobic surfaces. Experiments for water droplets on glass cones…
The classical wetting models, such as the Wenzel and Cassie-Baxter have been extensively used to quantify the wettability of laser-textured surfaces. However, these models do not provide any description of the corresponding droplet dynamics. In this work, we propose a detailed continuum-level modelling to study the wetting dynamics of a water droplet on Ti-6Al-4V alloy. The calculations are performed for flat surfaces and surfaces with various reliefs. The calculated evolutions of the droplet spreading parameter for flat surfaces, surfaces with triangular reliefs and one with two different per…
This study has numerically investigated the effect of surface wettability on two-phase immiscible flow and dynamics of droplet pinch-off in a T-junction microchannel using finite element method. A conservative level set method (CLSM) has been adopted to capture the interface topology in squeezing regime ($Ca_c <10^{-2}$) for wide flow rate ratio ($1/10 \leq Q_r \leq 10$) and contact angle ($120^{\circ} \leq θ\leq 180^{\circ}$). Based on the instantaneous phase profiles, droplet formation stages are classified as initial, filling, squeezing, pinch-off and stable droplet. Wettability effects are…
Post impingement morphology and dynamics of water droplets on convex cylindrical surfaces has been explored experimentally. Droplet impact and post-impact feature studies have been conducted on hydrophillic and superhydrophobic cylindrical surfaces. Effects of the impact Weber number and target-to-drop diameter ratio have been studied. The post-impact hydrodynamics have been quantified using the wetting fraction, the spreading factor and nondimensional film thickness at the north pole of the target. The observations reveal that the wetting fraction and spread factor increases with an increase …
Substrate wettability alteration induced control over crack formation process in thin colloidal films has been addressed in the present study. Colloidal nanosuspension (53nm, mean particle diameter) droplets have been subjected to natural drying to outline the effects of substrate surface energies over the dry-out characteristics with emphasis on crack dynamics, crack morphology and underlying particle arrangements. Experimental findings indicate that number of cracks formed decreases with increase in substrate hydrophobicity. These physical phenomena have been explained based on the magnitude…
Droplets confined in a microfluidic channel often exhibit intriguing shapes, primarily attributable to complex hydrodynamic interactions over small scales. We show that effect of varied substrate wettability conditions may further complicate these interactions remarkably, and often non-trivially. Our studies reveal that the combined influence of substrate wettability and fluidic confinement eventually culminates towards influencing the droplet transients, distortion of the local shear flow field, as well as drop stabilization against breakup or detachment, allowing one to develop different reg…
This paper reports the dynamic wetting behavior and heat transfer characteristics for impinging droplets on heated bi-phobic surfaces (superhydrophobic matrix with hydrophobic spots). A non-patterned superhydrophobic and a sticky hydrophobic surface acted as control wettability surfaces. As expected, differences in wetting and heat transfer dynamics were noticeable for all surfaces, with the most pronounced variation during the receding phase. During spreading, inertia from the impact dominated the droplet dynamics and heat transfer was dominated by convection at the contact line and internal …
The transport of small quantities of liquid on a solid surface is inhibited by the resistance to motion caused by the contact between the liquid and the solid. To overcome such resistance, motion can be externally driven through gradients in electric fields, but these all inconveniently involve the input of external energy. Alternatively, gradients in physical shape and wettability - the conical shape of cactus spines to create self-propelled motion. However, such self-propelled motion to date has limited success in overcoming the inherent resistance to motion of the liquid contact with the so…
Making liquid droplets move spontaneously on solid surfaces is a key challenge in lab-on-chip and heat exchanger technologies. The best-known mechanism, a wettability gradient, does not generally move droplets rapidly enough and cannot drive droplets smaller than a critical size. Here we report how a curvature gradient is particularly effective at accelerating small droplets, and works for both hydrophilic and hydrophobic surfaces. Experiments for water droplets on tapered surfaces with curvature radii in the sub-millimeter range show a maximum speed of 0.28 m/s, two orders of magnitude higher…
Droplet Impact on Microparticle Raft: Wettability, density and size govern splashing and microplastic ejection from rafts under raindrop impact
University College London（伦敦大学学院）；University of Oxford（牛津大学）；Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México（墨西哥国立自治大学材料研究所）
On Free Moving Micron-Sized Droplet-Particle Collisions
School of Chemical and Process Engineering, University of Leeds（利兹大学化学与工艺工程学院）；School of Natural Sciences, Department of Mathematics, University of Manchester（曼彻斯特大学自然科学学院数学系）；School of Mathematics, Statistics, Chemistry and Physics, Murdoch University（默多克大学数学、统计、化学和物理学院）
Small droplets on slender conical fibers spontaneously move along the fiber due to capillary action. The droplet motion depends on the geometry of the cone, the surface wettability, the surface tension, the viscosity, and the droplet size. Here we study with experiments and numerical simulations, the formation, spontaneous motion, and the eventual merger, of multiple droplets on slender conical fibers as they interact with each other. The droplet size and their spacing on the fibre is controlled by the Plateau-Rayleigh instability after dip-coating the conical fiber. Once these droplets are fo…
In this paper, the droplet impact dynamic behavior of droplet on Janus-textured heated substrates is numerically investigate by using the thermal Lattice Boltzmann method. The effect of several factors like the wettability, the Jakob number and the Weber number on the droplet impact dynamic behavior on Janus-textured heated surface are studied in detail. The simulation results show three types of boiling states, i.e., contact boiling, transition boiling and film boiling. The droplets in contact boiling state directionally migrate toward the denser region, while the droplets move toward the spa…
Asymmetric freezing of a sliding droplet on an inclined surface
Indian Institute of Technology Hyderabad（印度理工学院海德拉巴分校）；Aristotle University of Thessaloniki（塞萨洛尼基亚里士多德大学）；Indian Institute of Technology Ropar（印度理工学院罗帕尔分校）
Understanding the influence of hydrodynamic stresses and colloidal interactions between droplets and membranes will inform better engineered membrane surfaces and process conditions. Using a long-wave hydrodynamic description that incorporates wettability and electrostatic repulsion, we numerically investigate the influence of droplet shapes and membrane characteristics on the overall repulsion-attraction towards the membrane surface. A stability phase diagram classifies stable-unstable drop shapes and investigate whether there is reversible deposition of droplets onto the membrane.
Bumps are omnipresent from human skin to the geological structures on planets, which offer distinct advantages in numerous phenomena including structural color, drag reduction, and extreme wettability. Although the topographical parameters of bumps such as radius of curvature of convex regions significantly influence various phenomena including anti-reflective structures and contact time of impacting droplets, the effect of the detailed bump topography on growth and transport of condensates have not been clearly understood. Inspired by the millimetric bumps of the Namib Desert beetle, here we …
Understanding flow patterns and coupled transport phenomena during evaporation of droplets loaded with colloidal particles is central to design technical applications such as organizing proteins/DNA on a solid surface. We review recent reports on evaporating sessile droplets of colloidal suspensions on a solid surface. Starting from the classical mechanism of formation of a ring-like deposit, we discuss the influence of several problem parameters. Notably, thermal or solutal Marangoni effect, particle size, particle concentration, particle shape, substrate wettability, pH of the suspension etc…
A numerical method for simulating three-phase flows with moving contact lines on arbitrarily complex surfaces is developed in the framework of lattice Boltzmann method. In this method, the immiscible three-phase flow is modeled through a multiple-relaxation-time color-gradient model, which not only allows for a full range of interfacial tensions but also produces stable outcomes for a wide range of viscosity ratios. A characteristic line model is introduced to implement the wetting boundary condition, which is not only easy to implement but also able to handle arbitrarily complex boundaries wi…
Multiscale geometric analysis of dynamic wettability on complex, fractal-like, anisotropic surfaces
Institute of Mechanical Technology, Poznan University of Technology（波兹南理工大学机械技术研究所）；School of Mechanical Engineering, University of Leeds（利兹大学机械工程学院）；Mechanical and Materials Engineering Department, Worcester Polytechnic Institute（伍斯特理工学院机械与材料工程系）
The article reports droplet evaporation kinetics on inclined substrates. Comprehensive experimental and theoretical analyses of the droplet evaporation behaviour for different substrate declination, wettability and temperatures have been presented. Sessile droplets with substrate declination exhibit distorted shape and evaporate at different rates compared to droplets on the same horizontal substrate and is characterized by more often changes in regimes of evaporation. The slip stick and jump stick modes are prominent during evaporation. For droplets on inclined substrates, the evaporative flu…
This is a fluid dynamics video illustrating the impact of ferrofluidic droplets on surfaces of variable wettability. Surfaces studied include mica, teflon, and superhydrophobic. A magnet is placed beneath each surface, which modifies the behavior of the ferrofluid by applying additional downward force apart from gravity resulting in reduced droplet size and increased droplet velocity. For the superhydrophobic droplet a jetting phenomena is shown which only occurs in a limited range of impact speeds, higher than observed before, followed by amplified oscillation due to magnetic field as the dro…
Liquid droplets usually wet smooth and homogeneous substrates isotropically. Recent research works have revealed that droplets sit, slide and spread anisotropically on uniaxially stretched soft substrates, showing an enhanced wettability and contact line mobility along the stretching direction. This phenomenon arises from the anisotropic deformation of the substrate below the contact line. Here, we investigate how the stretching of soft substrates affects droplets drying. We observe that water droplet evaporates with an elongated non-circular contact line on the stretched substrates and switch…
Impact force and spreading characteristics of droplet impact on cylindrical surfaces
State Key Laboratory of Engines, Tianjin University（天津大学内燃机国家重点实验室）；National Industry-Education Platform of Energy Storage, Tianjin University（天津大学国家储能产教融合平台）
The article demonstrates that the internal circulation velocity and patterns in sessile droplets on superhydrophobic surfaces is governed by the surface curvature. Particle Image Velocimetry reveals that increasing convexity deteriorates the advection velocity whereas concavity augments it. A scaling model based on the effective curvature modulated change in wettability can predict the phenomenon, but weakly. Potential flow theory is appealed to and the curvatures are approximated as wedges with the rested droplet engulfing them partly. The spatially averaged experimental velocities are found …
We study steady-state thin films on a chemically heterogeneous substrates of finite size, subject to no-flux boundary conditions. Based on the structure of the bifurcation diagram, we classify the one-dimensional steady-state solutions that exist on such substrates into six different branches and develop asymptotic estimates for the steady-states on each branch. We show using perturbation expansions, that leading order solutions provide good predictions of the steady-state thin films on stepwise-patterned substrates. The analysis in one dimension can be extended to axisymmetric solutions. We a…
To understand the non-equilibrium relaxation dynamics of a liquid droplet on a switchable substrate the interplay of different length- and time-scales needs to be understood. We present a method to map the microscopic information, resulting from a molecular dynamics simulation, to a mesoscopic scale, reflected by a thin film model. After a discussion of the mapping procedure we first analyze the relaxation of a liquid droplet upon switching the wettability of the substrate. Further, we show that a nearly identical mapping procedure can be used for the description of two coalescing droplets. Wi…
