Achieving large bandwidth at strong mode conversion strengths is a central problem in few-mode optical waveguides. The most uncomplicated modification of a standard mode-converting grating is to incorporate a single extra gap. Such simple design has not been applied yet for broadening conversion spectrum between core modes of any few-mode waveguide e.g. few-mode fiber, possibly due to lacking knowledge of critical parameter control: (a) phase shift value at resonance wavelength, and (b) deterministic method for placement of the phase shift(s) accommodating the change in waveguide properties during grating writing. From semi-analytical considerations, we show in full generality that our design of a single-phase-shifted grating increases the bandwidth at 99 % conversion strength by more than 2.9 times, together with elucidating crucial parameter tolerances. The phase-shift placement is determinable on-the-go from the conversion spectra, thereby obviating any estimation of modified waveguide properties during grating-writing. This offers the longed on-demand in-fiber solution for dispersion control in fiber laser cavities and communication systems.
Based on coupled mode equations, the formula of null null bandwidth for tilted fiber grating is deduced in this paper. Numerical simulations and theoretical analysis of the effects of the tilt angle on bandwidth and maximum reflectivity are performed. Furthermore, under the maximum reflection of 95%, the relation of bandwidth with modulation amplitude and length of grating, and the needed length of grating are demonstrated in two three dimensional diagrams. It reveals that the grating tilt can obviously narrow the bandwidth, especially in the case of large modulation amplitude and grating leng…
We propose a monolithic optical bandpass filter with a transmission bandwidth tunable by the incident angle in a tri-mode high-contrast grating (HCG). We attribute this extraordinary phenomenon to the destructive interference between the TM$_{0}$ and TM$_{2}$ modes and the Fabry-Pérot resonance of the TM1 mode, which can only be excited at the oblique incidence. The transmission bandwidth can be tuned from zero at normal incidence and increases quadratically with incident angle, while the center wavelength reds shifts slightly. The corresponding Q factor can be continuously tuned from 10$^{6}$…
We report a comprehensive study on the performance of uniform and non-uniform based subwavelength grating couplers in Silicon-on-Insulator. The two performance metrics, coupling efficiency and bandwidth enhancement and trade-offs is presented. We also present, design parameters to achieve high-efficiency and broadband operation based on the detailed study of various loss mechanisms in the grating. Based on the detailed analysis subwavelength grating coupler designs with efficiency as high as 84 % with a 1 dB bandwidth of 50 nm and 98 % with a 44 nm 1 dB bandwidth is presented.
Ultra-broadband long-period fiber grating with 10-dB bandwidth of 155 nm and 3-dB bandwidth of 415 nm is demonstrated around 1060 nm, which has been combined with a tunable ytterbium-doped fiber laser to generate optical doughnut beams in the spectral range from 1030 nm to 1099 nm, and the vector nature of generated optical fields are observed. The long-period fiber grating has also been used to transform the amplified spontaneous emission of an ytterbium-doped fiber amplifier into a broadband optical doughnut beam.
We computationally study a subwavelength dielectric grating structure, show that slab waveguide modes can be used to obtain broadband high reflectivity, and analyze how slab waveguide modes influence reflection. A structure showing interference between Fabry-Perot modes, slab waveguide modes, and waveguide array modes is designed with ultra-broadband high reflectivity. Owing to the coupling of guided modes, the region with reflectivity R > 0.99 has an ultra-high bandwidth ( Δf/f > 30%). The incident-angle region with R > 0.99 extends over a range greater than 40°. Moreover, an asymmetric waveg…
We proposed a narrow spectral bandwidth Erbium-doped fiber (EDF) laser Q-switched by a homemade saturable dynamic induced grating (SDIG) which is introduced via reforming the structure of a fiber saturable absorbers FSA with a piece of EDF and a fiber Bragg grating. The SDIG integrates both saturable absorption and spectral filtering effect simultaneously, which was confirmed through theoretical analysis and experimental results for the first time, to the best of our knowledge. Further study verified that the spectral width of the Q-switched emissions is decided by the length of the SDIG and t…
A broadband chaotic laser with a flat power spectrum extending up to 8.5GHz is achieved by injecting continuous wave laser light into a chaotic diode laser perturbed by fiber random grating induced distributed feedback, which forms a gain-coupled chaotic laser system. More than triple bandwidth enhancement is realized with appropriate frequency detuning between the master and slave lasers. Unlike normal chaotic lasers, the output from such a broadband chaotic laser is free from time-delay signature, which can be applied for practical real-time random number generations and will find useful app…
A single-order transmission diffraction grating based on dispersion engineered all-dielectric metasurfaces is proposed and its wavelength discriminating properties have been theoretically described and confirmed using numerical simulations. The metasurface is designed using a 2D array of all-dielectric resonators, which emulates a Huygens source configuration to achieve a perfect match to free-space in broad bandwidth. Using a holey dielectric nanodisk structure as the unit cell, the resonant wavelength is tapered across the metasurface to engineer the wavelength dependent spatial phase gradie…
This work presents a theoretical investigation of an active photonic grating of the parity-time (PT) symmetric architecture. The analytical study of the free-space mode propagation from the grating structure indicates the unique bifurcation property due to the PT-symmetry modulation. It is shown that both the gain/loss contrast and the lattice constant parameters are critical factors to modulate the active photonic system in between the PT-symmetry to the symmetry-broken phases. Furthermore, numerical simulations via the Rigorous Coupled-Wave Analysis (RCWA) method discover the existence of a …
The emergence of optical micro/nano-fiber (MNF) with a subwavelength diameter, which has ultra-light mass and an intense light field, brings an opportunity for develop fiber based optomechanical systems. In this study, we theoretically show an optomechanical effect in silica MNF Bragg gratings (MNFBGs). The light-induced mechanical effect results in continuously distributed strain along the grating. It is shown that the power-related strain introduces an optically reconfigurable chirp in the grating period. We develop new optomechanical coupled-mode equations and theoretically analyze the infl…
Supercontinuum generation is an extensively studied and arguably the most important and all-encompassing nonlinear phenomenon. Yet, we do not have a good control over all the signals generated in this process. Usually a large part of an octave spanning spectrum has orders of magnitude too much weaker signal than the peak to be useful for any application. In this work we show strong signal generation within a supercontinuum using a silicon Bragg grating waveguide. We show up to 23 dB of signal enhancement over a 10 nm full-width-at-half-maximum bandwidth at the Bragg resonance in the telecom wi…
We present here the inscription of single-mode waveguides with Bragg gratings in sapphire. The waveguide Bragg gratings have a novel multi-layer depressed cladding design in the 1550 nm telecommunications waveband. The Bragg gratings have a narrow bandwidth (<0.5 nm) and have survived annealing at 1000°C. The structures are inscribed with femtosecond laser direct writing, using adaptive beam shaping with a non-immersion objective. A single-mode sapphire fiber Bragg grating is created by writing a waveguide with a Bragg grating within a 425 μm diameter sapphire optical fiber, providing signific…
By exploiting helical gratings (HGs), we propose and simulate flexible generation, conversion and exchange of fiber guided orbital angular momentum (OAM) modes. HGs can enable the generation of OAM modes, and the OAM conversion between two arbitrary modes guided in fibers. A specific HG can exchange the OAM states of a couple of OAM modes, i.e, OAM exchange. In addition, a Fabry Perot cavity cascaded with two identical reflective HGs can reflect converted OAM modes with a comb spectrum. The HGs based generation conversion and exchange of OAM modes are dependent on helix period, orientation, an…
In this paper, we demonstrate a domain inversion crystal structure to study the cascaded three-wave mixing process in a two peak Stark-chirped rapid adiabatic passage. We have achieved efficient wavelength conversion, which can be performed in intuitive order and counterintuitive order. The requirement of crystal is reduced and the flexibility of structure design is improved. When the conversion wavelength is fixed, increasing the coupling coefficient between the two peaks can reduce the intensity of the intermediate wavelength while maintaining high conversion efficiency. Compared with the ca…
We present an electrically switchable graphene terahertz (THz) modulator with a tunable-by-design optical bandwidth and we exploit it to compensate the cavity dispersion of a quantum cascade laser (QCL). Electrostatic gating is achieved by a metal-grating used as a gate electrode, with an HfO2/AlOx gate dielectric on top. This is patterned on a polyimide layer, which acts as a quarter wave resonance cavity, coupled with an Au reflector underneath. We get 90% modulation depth of the intensity, combined with a 20 kHz electrical bandwidth in the 1.9 _ 2.7 THz range. We then integrate our modulato…
The unique spectral behavior exhibited by a class of non-uniform Bragg periodic structures, namely chirped and apodized fiber Bragg gratings (FBGs) influenced by parity and time reversal ($\mathcal{PT}$) symmetry, is presented. The interplay between the $\mathcal{PT}$-symmetry and nonuniformities brings exceptional functionalities in the broken $\mathcal{PT}$-symmetric phase such as wavelength selective amplification and single-mode lasing for a wide range of variations in gain-loss. We observe that the device is no more passive and it undergoes a series of transitions from asymmetric reflecti…
We have designed and fabricated a shallow-etched grating on gallium arsenide nanomembranes for efficient chip-to-fiber coupling in quantum photonic integrated circuits. Experimental results show that the grating provides a fiber-coupling efficiency of >60 %, a greatly suppressed back reflection of <1 % for the designed wavelength of 930 nm, and a 3-dB bandwidth of >43 nm. Highly efficient single-photon collection from embedded indium arsenide quantum dots to an optical fiber was realized with the designed grating, showing an average sixfold increase in photon count compared to commonly used ci…
The high-order harmonic generation (HHG), if phase matched, opens a unique way to produce coherent ultrafast extreme-UV (XUV) or soft x-ray light sources. Here we describe a robust and tunable method for scaling and narrowing the bandwidth of high-order harmonics in different transversal modes based on femtosecond dynamic grating in a gas jet. This technique has potential of self-phase controlled XUV generation by adjusting the intersect angle and the intensity ratio of interfering fundamental beams. The limitations of using high intensity laser fundamental pulses in gas, such as non-negligibl…
A blazed chirped Bragg grating in a planar silica waveguide device was used to create an integrated diffractive element for a spectrometer. The grating diffracts light from a waveguide and creates a wavelength dependent focus in a manner similar to a bulk diffraction grating spectrometer. An external imaging system is used to analyse the light, later device iterations plan to integrate detectors to make a fully integrated spectrometer. Devices were fabricated with grating period chirp rates in excess of 100nm/mm, achieving a focal length of 5.5mm. Correction of coma aberrations resulted in a d…
We consider Wood anomalies in diffraction spectrum from two-dimensional dielectric periodic grid embedded in a surrounding media. The grid is of subwavelength thickness, and diffraction of wave having S-polarization is investigated in the vicinity of the emergence of first diffraction maximum. We reduce Maxwell equations to coupled-mode theory with three parameters, which are integral characteristics of material arrangement in the grid. In particular, we show that such grids are capable to have full reflectance in parametrically narrow frequency bandwidth. The effect is accompanied by a parame…
The large transparency window of silicon, covering the 1.1 um 8 um wavelength range, makes it a promising platform for the implementation of photothermal-based absorption spectrometers. These devices indirectly sense absorption in the mid-infrared (MIR) by using near-infrared (NIR) wavelengths, thereby enabling the realization of MIR absorption spectrometers without the need for MIR photodetectors. Nevertheless, due to their comparatively large index contrast and cross-sections, MIR Si strip waveguides are multi-mode at NIR wavelengths, hindering device implementation. Here we present, for the…
A method for the agile generation of the optical frequencies required for laser cooling and atom interferometry of rubidium is demonstrated. It relies on fiber Bragg grating technology to filter the output of an electro-optic modulator and was demonstrated in a robust, alignment-free, single-seed, frequency-doubled, telecom fiber laser system. The system was capable of 50 ns frequency switching over a ~40 GHz range, ~0.5 W output power and amplitude modulation with a ~15 ns rise/fall time and an extinction ratio of 120 $\pm$ 2 dB. The technology is ideal for enabling high-bandwidth, mobile ind…
Here we show a photonic design for tunable dual-wavelength generation deploying optical nonlinear mode coupling of two coupled III-V semiconductor microring resonators (MRRs) connected to a pump and drop waveguide buses. Here one of the two rings contains a grating, while the other has a planar surface. The underling mechanism for the dual wavelength generation originates from the resonance-detuning of the spectra resulting in non-linear mode mixing. Tunability of the wavelengths is achieved by altering the grating depth of the MRR and the power coupling coefficients. For the grating design of…
In this study, we theoretically and numerically investigate the resonant modes and reflectance of an optical grating consisting of a wavy dielectric slab by applying the spectral element method. The presence of the wavy shape transforms the waveguide modes into leaky resonant modes. A few resonant modes with specific longitudinal wave number have infinitely large Q factor, while the other resonant modes have finite Q factor. For the leaky resonant mode with zero longitudinal wave number, the Q factor is inversely proportional to the amplitude of the wavy shape. An array of multiple low-Q wavy …
Using a hydrodynamic approach we examine bulk- and surface-induced second and third harmonic generation from semiconductor nanowire gratings having a resonant nonlinearity in the absorption region. We demonstrate resonant, broadband and highly efficient optical frequency conversion: contrary to conventional wisdom, we show that harmonic generation can take full advantage of resonant nonlinearities in a spectral range where nonlinear optical coefficients are boosted well beyond what is achievable in the transparent, long-wavelength, non-resonant regime. Using femtosecond pulses with approximate…
A new method to generate and control the amplitude and phase distributions of a optical vortex beam is proposed. By introducing a holographic grating on top of the dielectric waveguide, the free space vortex beam and the in-plane guiding wave can be converted to each other. This microscale holographic grating is very robust against the variation of geometry parameters. The designed vortex beam generator can produce the target beam with a fidelity up to 0.93, and the working bandwidth is about 175 nm with the fidelity larger than 0.80. In addition, a multiple generator composed of two holograph…
A novel design of large bandwidth, fabrication tolerant, CMOS-compatible compact tapers (15 um) have been proposed and experimentally demonstrated in silicon-on-insulator. The proposed taper along with linear grating couplers for spot-size conversion exhibits no degradation in the coupling efficiency compared to a standard focusing grating in 1550 nm band. A single taper design has a broadband operation over 600 nm that can be used in O, C and L-band. The proposed compact taper is highly tolerant to fabrication variations; 80 nm change in the taper width and 200 nm in end waveguide width varie…
Few-picosecond pulse generation featuring ultrafast spectral dynamics in gain-switched surface-grating DFB lasers via impulsive optical pumping
Institute for Solid State Physics, The University of Tokyo（东京大学固体物理研究所）；State Key Laboratory of Precision Spectroscopy, Department of Electronic Engineering, East China Normal University（华东师范大学精密光谱科学国家重点实验室电子工程系）；LDseed Co., Ltd.（LDseed有限公司）
Compact and efficient optical antennas are fundamental components for many applications, including high-density fiber-chip coupling and optical phased arrays. Here we present the design of grating-based micro-antennas with perfectly vertical emission in the 300-nm silicon-on-insulator platform. We leverage a methodology combining adjoint optimization and machine learning dimensionality reduction to efficiently map the multiparameter design space of the antennas, analyse a large number of relevant performance metrics, carry out the required multi-objective optimization, and discover high perfor…
We demonstrate the quantum Talbot effect using pairs of single photons produced by parametric down conversion. In contrast to the previous works, we use a programmable spatial light modulator to behave as a diffraction grating. Thus, the investigation of the Talbot diffraction patterns under the variation of grating structure can be easily performed. The influence of spectral bandwidth of the down-converted photons on the diffraction pattern is also investigated. A theoretical model based on the wave nature of photons is presented to explain the Talbot diffraction pattern under varying conditi…
Visible dual-comb spectroscopy across more than 100 THz with lithium niobate nanophotonic waveguides
University of Colorado Boulder（科罗拉多大学博尔德分校）；National Institute of Standards and Technology（美国国家标准与技术研究院）；Université Laval（拉瓦尔大学）；California Institute of Technology（加州理工学院）
Efficient fiber-to-chip coupling has been a major hurdle to cost-effective packaging and scalable interconnections of photonic integrated circuits. Conventional photonic packaging methods relying on edge or grating coupling are constrained by high insertion losses, limited bandwidth density, narrow band operation, and sensitivity to misalignment. Here we present a new fiber-to-chip coupling scheme based on free-form reflective micro-optics. A design approach which simplifies the high-dimensional free-form optimization problem to as few as two full-wave simulations is implemented to empower com…
