Variational quantum algorithms are considered to be appealing applications of near-term quantum computers. However, it has been unclear whether they can outperform classical algorithms or not. To reveal their limitations, we must seek a technique to benchmark them on large scale problems. Here, we propose a perturbative approach for efficient benchmarking of variational quantum algorithms. The proposed technique performs perturbative expansion of a circuit consisting of Clifford and Pauli rotation gates, which is enabled by exploiting the classical simulatability of Clifford circuits. Our method can be applied to a wide family of parameterized quantum circuits consisting of Clifford gates and single-qubit rotation gates. The approximate optimal parameter obtained by the method can also serve as an initial guess for further optimizations on a quantum device, which can potentially solve the so-called ``barren-plateau'' problem. As the first application of the method, we perform a benchmark of so-called hardware-efficient-type ansatzes when they are applied to the VQE of one-dimensional hydrogen chains up to $\mathrm{H}_{24}$, which corresponds to $48$-qubit system, using a standard workstation.
We introduce a scheme to characterise a qudit T gate that has different noise than a set of Clifford gates. We developed our scheme through representation theory and ring theory to generalise non-Clifford interleaved benchmarking to qudit systems. By restricting to the qubit case, we recover the dihedral benchmarking scheme. Our characterisation scheme provides experimental physicists a practical method for characterising universal qudit gate sets and advances randomised benchmarking research by providing the characterisation of a complete qudit library.
Randomized benchmarking is a widely used experimental technique to characterize the average error of quantum operations. Benchmarking procedures that scale to enable characterization of $n$-qubit circuits rely on efficient procedures for manipulating those circuits and, as such, have been limited to subgroups of the Clifford group. However, universal quantum computers require additional, non-Clifford gates to approximate arbitrary unitary transformations. We define a scalable randomized benchmarking procedure over $n$-qubit unitary matrices that correspond to protected non-Clifford gates for a…
Randomized benchmarking provides a tool for obtaining precise quantitative estimates of the average error rate of a physical quantum channel. Here we define real randomized benchmarking, which enables a separate determination of the average error rate in the real and complex parts of the channel. This provides more fine-grained information about average error rates with approximately the same cost as the standard protocol. The protocol requires only averaging over the real Clifford group, a subgroup of the full complex Clifford group, and makes use of the fact that it forms an orthogonal 2-des…
Hardware efficient transpilation of quantum circuits to a quantum devices native gateset is essential for the execution of quantum algorithms on noisy quantum computers. Typical quantum devices utilize a gateset with a single two-qubit Clifford entangling gate per pair of coupled qubits, however, in some applications access to a non-Clifford two-qubit gate can result in more optimal circuit decompositions and also allows more flexibility in optimizing over noise. We demonstrate calibration of a low error non-Clifford Controlled-$\fracπ{2}$ phase (CS) gate on a cloud based IBM Quantum computing…
Non-Clifford Benchmarking via Ensemble Feature Selection
St Kliment Ohridski University of Sofia（圣克利门特·奥赫里德斯基索菲亚大学）；Center for Quantum Technologies, St Kliment Ohridski University of Sofia（圣克利门特·奥赫里德斯基索菲亚大学量子技术中心）
Randomized benchmarking is an experimental procedure intended to demonstrate control of quantum systems. The procedure extracts the average error introduced by a set of control operations. When the target set of operations is intended to be the set of Clifford operators, the randomized benchmarking algorithm is particularly easy to perform and its results have an important interpretation with respect to quantum computation. The aim of the benchmark is to provide a simple, useful parameter describing the quality of quantum control with an experiment that can be performed in a standard way on an…
Unitarity randomized benchmarking (URB) is an experimental procedure for estimating the coherence of implemented quantum gates independently of state preparation and measurement errors. These estimates of the coherence are measured by the unitarity. A central problem in this experiment is relating the number of data points to rigorous confidence intervals. In this work we provide a bound on the required number of data points for Clifford URB as a function of confidence and experimental parameters. This bound has favorable scaling in the regime of near-unitary noise and is asymptotically indepe…
Benchmarking methods that can be adapted to multi-qubit systems are essential for assessing the overall or "holistic" performance of nascent quantum processors. The current industry standard is Clifford randomized benchmarking (RB), which measures a single error rate that quantifies overall performance. But scaling Clifford RB to many qubits is surprisingly hard. It has only been performed on 1, 2, and 3 qubits as of this writing. This reflects a fundamental inefficiency in Clifford RB: the $n$-qubit Clifford gates at its core have to be compiled into large circuits over the 1- and 2-qubit gat…
Recently, there has been an emergence of useful applications for noisy intermediate-scale quantum (NISQ) devices notably, though not exclusively, in the fields of quantum machine learning and variational quantum algorithms. In such applications, circuits of various depths and composed of different sets of gates are run on NISQ devices. Therefore, it is crucial to find practical ways to capture the general performance of circuits on these devices. Motivated by this pressing need, we modified the standard Clifford randomized benchmarking (RB) and interleaved RB schemes targeting them to hardware…
Phase-Altered Interleaved Randomized Benchmarking for Compiled Non-Clifford Gates
Center for Quantum Technologies, Department of Physics, Sofia University（索非亚大学物理系量子技术中心）；Georgi Nadjakov Institute of Solid State Physics, Bulgarian Academy of Sciences（保加利亚科学院格奥尔基·纳贾科夫固体物理研究所）
Any technology requires precise benchmarking of its components, and the quantum technologies are no exception. Randomized benchmarking allows for the relatively resource economical estimation of the average gate fidelity of quantum gates from the Clifford group, assuming identical noise levels for all gates, making use of suitable sequences of randomly chosen Clifford gates. In this work, we report significant progress on randomized benchmarking, by showing that it can be done for individual quantum gates outside the Clifford group, even for varying noise levels per quantum gate. This is possi…
With the development of controllable quantum systems, fast and practical characterization for multi-qubit gates is essential for building high-fidelity quantum computing devices. The usual way to fulfill this requirement via randomized benchmarking asks for the complicated implementation of numerous multi-qubit twirling gates. How to efficiently and reliably estimate the fidelity of a quantum process remains an open problem. In this work, we propose a character-cycle benchmarking protocol and a character-average benchmarking protocol only using local twirling gates to estimate the process fide…
Randomized benchmarking is a technique for estimating the average fidelity of a set of quantum gates. For general gatesets, however, it is difficult to draw robust conclusions from the resulting data. Here we propose a new method based on representation theory that has little experimental overhead and applies to a broad class of benchmarking problems. As an example, we apply our method to a gateset that includes the $T$-gate, and analyze a new interleaved benchmarking protocol that extracts the average fidelity of a 2-qubit Clifford gate using only single-qubit Clifford gates as reference.
Characterization of Unlearnable Noise with Mid-Circuit-Measurement-Based Cycle Benchmarking
Imperial College London（帝国理工学院）；Fraunhofer Institute for Industrial Mathematics（弗劳恩霍夫工业数学研究所）；Algorithmiq Ltd（Algorithmiq有限公司）；University of Helsinki（赫尔辛基大学）；Fraunhofer Center for Maritime Logistics（弗劳恩霍夫海事物流中心）
Randomized benchmarking is routinely used as an efficient method for characterizing the performance of sets of elementary logic gates in small quantum devices. In the measurement-based model of quantum computation, logic gates are implemented via single-site measurements on a fixed universal resource state. Here we adapt the randomized benchmarking protocol for a single qubit to a linear cluster state computation, which provides partial, yet efficient characterization of the noise associated with the target gate set. Applying randomized benchmarking to measurement-based quantum computation exh…
Randomized benchmarking (RB) is a powerful method for determining the error rate of experimental quantum gates. Traditional RB, however, is restricted to gatesets, such as the Clifford group, that form a unitary 2-design. The recently introduced character RB can benchmark more general gates using techniques from representation theory; up to now, however, this method has only been applied to "multiplicity-free" groups, a mathematical restriction on these groups. In this paper, we extend the original character RB derivation to explicitly treat non-multiplicity-free groups, and derive several app…
Typical quantum gate tomography protocols struggle with a self-consistency problem: the gate operation cannot be reconstructed without knowledge of the initial state and final measurement, but such knowledge cannot be obtained without well-characterized gates. A recently proposed technique, known as randomized benchmarking tomography (RBT), sidesteps this self-consistency problem by designing experiments to be insensitive to preparation and measurement imperfections. We implement this proposal in a superconducting qubit system, using a number of experimental improvements including implementing…
We characterize control of a qutrit implemented in the lowest three energy levels of a capacitively-shunted flux-biased superconducting circuit. Randomized benchmarking over the qutrit Clifford group yields an average fidelity of 98.89 $\pm$ 0.05%. For a selected subset of the Clifford group, we perform quantum process tomography and observe the behaviour of repeated gate sequences. Each qutrit gate is generated using only two-state rotations via a method applicable to any unitary. We find that errors are due to decoherence primarily and have a significant contribution from level shifts. This …
One of the main challenges in building a quantum processor is to characterize the environmental noise. Noise characterization can be achieved by exploiting different techniques, such as randomization where several sequences of random quantum gates are applied to the qubit under test to derive statistical characteristics about the affecting noises. A scalable and robust algorithm able to benchmark the full set of Clifford gates using randomization techniques is called randomized benchmarking. In this study, we simulated randomized benchmarking protocols in a semiconducting all-electrical three-…
We implement a complete randomized benchmarking protocol on a system of two superconducting qubits. The protocol consists of randomizing over gates in the Clifford group, which experimentally are generated via an improved two-qubit cross-resonance gate implementation and single-qubit unitaries. From this we extract an optimal average error per Clifford of 0.0936. We also perform an interleaved experiment, alternating our optimal two-qubit gate with random two-qubit Clifford gates, to obtain a two-qubit gate error of 0.0653. We compare these values with a two-qubit gate error of ~0.12 obtained …
We describe a scalable experimental protocol for obtaining estimates of the error rate of individual quantum computational gates. This protocol, in which random Clifford gates are interleaved between a gate of interest, provides a bounded estimate of the average error of the gate under test so long as the average variation of the noise affecting the full set of Clifford gates is small. This technique takes into account both state preparation and measurement errors and is scalable in the number of qubits. We apply this protocol to a superconducting qubit system and find gate errors that compare…
The increasing scale of near-term quantum hardware motivates the need for efficient noise characterization methods, since qubit and gate level techniques cannot capture crosstalk and correlated noise in many qubit systems. While scalable approaches, such as cycle benchmarking, are known for special classes of quantum circuits, the characterization of noise in general circuits with non-Clifford gates has been an unreachable task. We develop an algorithm that can sample-efficiently estimate the total amount of noise induced by a layer of arbitrary non-Clifford gates, including all crosstalks, an…
Randomized benchmarking (RB) is an important protocol for robustly characterizing the error rates of quantum gates. The technique is typically applied to the Clifford gates since they form a group that satisfies a convenient technical condition of forming a unitary 2-design, in addition to having a tight connection to fault-tolerant quantum computing and an efficient classical simulation. In order to achieve universal quantum computing one must add at least one additional gate such as the T gate (also known as the $π$/8 gate). Here we propose and analyze a simple variation of the standard inte…
Randomized benchmarking (RB) is a widely used method for estimating the average fidelity of gates implemented on a quantum computing device. The stochastic error of the average gate fidelity estimated by RB depends on the sampling strategy (i.e., how to sample sequences to be run in the protocol). The sampling strategy is determined by a set of configurable parameters (an RB configuration) that includes Clifford lengths (a list of the number of independent Clifford gates in a sequence) and the number of sequences for each Clifford length. The RB configuration is often chosen heuristically and …
As quantum devices scale up, many-body quantum gates and algorithms begin to surpass what is possible to simulate classically. Validation methods which rely on such classical simulation, such as process tomography and randomized benchmarking, cannot efficiently check correctness of most of the processes involved. In particular non-Clifford gates are a requirement for not only universal quantum computation but for any algorithm or quantum simulation that yields fundamental speedup in comparison with its classical counterpart. We show that it is in fact still possible to validate such non-simula…
Spin systems controlled and probed by magnetic resonance have been valuable for testing the ideas of quantum control and quantum error correction. This paper introduces an X-band pulsed electron spin resonance spectrometer designed for high-fidelity coherent control of electron spins, including a loop-gap resonator for sub-millimeter sized samples with a control bandwidth ~ 40 MHz. Universal control is achieved by a single-sideband upconversion technique with an I-Q modulator and a 1.2 GS/s arbitrary waveform generator. A single qubit randomized benchmarking protocol quantifies the average err…
Randomized benchmarking (RB) is the gold standard for experimentally evaluating the quality of quantum operations. The current framework for RB is centered on groups and their representations, but this can be problematic. For example, Clifford circuits need up to $O(n^2)$ gates, and thus Clifford RB cannot scale to larger devices. Attempts to remedy this include new schemes such as linear cross-entropy benchmarking (XEB), cycle benchmarking, and non-uniform RB, but they do not fall within the group-based RB framework. In this work, we formulate the \emph{universal randomized benchmarking (URB)…
As experimental platforms for quantum information processing continue to mature, characterization of the quality of unitary gates that can be applied to their quantum bits (qubits) becomes essential. Eventually, the quality must be sufficiently high to support arbitrarily long quantum computations. Randomized benchmarking already provides a platform-independent method for assessing the quality of one-qubit rotations. Here we describe an extension of this method to multi-qubit gates. We provide a platform-independent protocol for evaluating the performance of experimental Clifford unitaries, wh…
We present a protocol for Interleaved Randomized Benchmarking of arbitrary quantum gates using Monte Carlo sampling of quantum states. It is generally applicable, including non-Clifford gates while preserving key advantages of Randomized Benchmarking such as error amplification as well as independence from state preparation and measurement errors. This property is crucial for implementations in many contemporary systems. Although the protocol scales exponentially in the number of qubits, it is superior to direct Monte Carlo sampling of the average gate fidelity in both the total number of expe…
We study optimal synthesis of Clifford circuits, and apply the results to peep-hole optimization of quantum circuits. We report optimal circuits for all Clifford operations with up to four inputs. We perform peep-hole optimization of Clifford circuits with up to 40 inputs found in the literature, and demonstrate the reduction in the number of gates by about 50%. We extend our methods to the optimal synthesis of linear reversible circuits, partially specified Clifford functions, and optimal Clifford circuits with five inputs up to input/output permutation. The results find their application in …
The Clifford group is a fundamental structure in quantum information with a wide variety of applications. We discuss the tensor representations of the $q$-qubit Clifford group, which is defined as the normalizer of the $q$-qubit Pauli group in $U(2^q)$. In particular, we characterize all irreducible subrepresentations of the two-copy representation $φ^{\otimes2}$ of the Clifford group on the matrix space $\mathbb{C}^{d\times d}\otimes \mathbb{C}^{d\times d}$ with $d=2^q$. In an upcoming companion paper we applied this result to cut down the number of samples necessary to perform randomised ben…
Randomized Benchmarking allows to efficiently and scalably characterize the average error of an unitary 2-design such as the Clifford group $\mathcal{C}$ on a physical candidate for quantum computation, as long as there are no non-computational leakage levels in the system. We investigate the effect of leakage errors on Randomized Benchmarking induced from an additional level per physical qubit and provide a modified protocol that allows to derive reliable estimates for the error per gate in their presence. We assess the variance of the sequence fidelity corresponding to the number of random s…
Efficient fidelity simulation of high-rate magic distillation circuits
QuEra Computing Inc.（QuEra 计算公司）；Joint Center for Quantum Information and Computer Science, University of Maryland（马里兰大学量子信息与计算机科学联合中心）；Simons Institute for the Theory of Computing, University of California at Berkeley（加州大学伯克利分校西蒙斯计算理论研究所）；Institute for Theoretical Physics, ETH Zürich（苏黎世联邦理工学院理论物理研究所）；Department of Physics, Harvard University（哈佛大学物理学系）
Standard randomized benchmarking protocols entail sampling from a unitary 2 design, which is not always practical. In this article we examine randomized benchmarking protocols based on subgroups of the Clifford group that are not unitary 2 designs. We introduce a general method for analyzing such protocols and subsequently apply it to two subgroups, the group generated by controlled-NOT, Hadamard, and Pauli gates and that generated by only controlled-NOT and Pauli gates. In both cases the error probability can be estimated to within a factor of two or less where the factor can be arranged to b…
We construct a gate and time-independent noise model that results in the output of a logical randomized benchmarking protocol oscillating rather than decaying exponentially. To illustrate our idea, we first construct an example in standard randomized benchmarking where we assume the existence of ``hidden'' qubits, permitting a choice of representation of the Clifford group that contains multiplicities. We use the multiplicities to, with each gate application, update a hidden memory of the gate history that we use to circumvent theorems which guarantee the output decays exponentially. In our fo…
The performance of quantum gates is often assessed using some form of randomized benchmarking. However, the existing methods become infeasible for more than approximately five qubits. Here we show how to use a simple and customizable class of circuits -- randomized mirror circuits -- to perform scalable, robust, and flexible randomized benchmarking of Clifford gates. We show that this technique approximately estimates the infidelity of an average many-qubit logic layer, and we use simulations of up to 225 qubits with physically realistic error rates in the range 0.1-1% to demonstrate its scala…
Benchmarking VQE Configurations: Architectures, Initializations, and Optimizers for Silicon Ground State Energy
eBRAIN Lab, Division of Engineering, New York University Abu Dhabi (NYUAD), Abu Dhabi, UAE（纽约大学阿布扎赫（NYUAD））；Center for Quantum and Topological Systems (CQTS), NYUAD Research Institute, NYUAD, Abu Dhabi, UAE（纽约大学阿布扎赫研究机构）
Quantum computing has potential to provide exponential speedups over classical computing for many important applications. However, today's quantum computers are in their early stages, and hardware quality issues hinder the scale of program execution. Benchmarking and simulation of quantum circuits on classical computers is therefore essential to advance the understanding of how quantum computers and programs operate, enabling both algorithm discovery that leads to high-impact quantum computation and engineering improvements that deliver to more powerful quantum systems. Unfortunately, the natu…
Efficient Fidelity Estimation of General Quantum Resource States via Clifford Circuits
Perimeter Institute for Theoretical Physics（理论物理 perimeter 研究所）；University of Waterloo（滑铁卢大学）；Kyoto University（京都大学）；Osaka University（大阪大学）；Fujitsu Quantum Computing Joint Research Division, Center for Quantum Information and Quantum Biology, Osaka University（富士通量子计算联合研究部，大阪大学量子信息与量子生物学中心）；RIKEN Center for Quantum Computing (RQC)（理化学研究所量子计算中心）
提出基于 Clifford 门和 Pauli 测量的 Bell-相干保真度估计（BCFE），实现最优样本复杂度 Θ(1/ε)，在 STAR 架构中比 DFE 节省约 27 倍资源，支持容错量子计算的高效资源基准测试。
Randomized benchmarking (RB) is widely used to measure an error rate of a set of quantum gates, by performing random circuits that would do nothing if the gates were perfect. In the limit of no finite-sampling error, the exponential decay rate of the observable survival probabilities, versus circuit length, yields a single error metric $r$. For Clifford gates with arbitrary small errors described by process matrices, $r$ was believed to reliably correspond to the mean, over all Cliffords, of the average gate infidelity (AGI) between the imperfect gates and their ideal counterparts. We show tha…
