Context. We study two coronal mass ejections (CMEs) observed between April 1-2, 2019 by both the inner Wide-Field Imager for Parker Solar Probe (WISPR-I) and the inner heliospheric imager (HI-1) on board STEREO-A. This is the first study of CME observations from two viewpoints in similar directions but at considerably different solar distances. Aims. Our objective is to understand how the PSP observations affect the CME kinematics, especially due to its proximity to the Sun. Methods. We estimate the CME positions, speeds, accelerations, propagation directions and longitudinal deflections using imaging observations from two spacecraft, and a set of analytical expressions that consider the CME as a point structure and take into account the rapid change in spacecraft position. Results. We find that both CMEs are slow ($< 400\ km\ s^{-1}$), propagating eastward of the Sun-Earth line. The second CME seems to accelerate between $\sim 0.1$ to $\sim 0.2\ au$ and deflect westward with an angular speed consistent with the solar rotation speed. We find some discrepancies in the CME solar distance (up to $0.05\ au$, particularly for CME \#1), latitude (up to $\sim10^{\circ}$) and longitude (up to $24^{\circ}$) when comparing results from different fit cases (different observations or set of free parameters). Conclusions. Discrepancies in longitude are likely due to the feature tracked visually rather than instrumental biases or fit assumptions. For similar reasons, the CME \#1 solar distance, as derived from WISPR-I observations, is larger than the HI-1 result, regardless of the fit parameters considered. Error estimates for CME kinematics do not show any clear trend associated to the observing instrument. The source region location and the lack of any clear in situ counterparts (both at near-Earth and at PSP) support our estimate of the propagation direction for both events.
We present an algorithm to detect the outer edges of Coronal Mass Ejection (CME) events as seen in differences of Heliospheric Imager STEREO SECCHI HI-1 images from either A or B spacecraft, as well as its implementation in Python.
We have performed, for the first time, the successful automated detection of Coronal Mass Ejections (CMEs) in data from the inner heliospheric imager (HI-1) cameras on the STEREO A spacecraft. Detection of CMEs is done in time-height maps based on the application of the Hough transform, using a modified version of the CACTus software package, conventionally applied to coronagraph data. In this paper we describe the method of detection. We present the result of the application of the technique to a few CMEs that are well detected in the HI-1 imagery, and compare these results with those based o…
We present an advance towards accurately predicting the arrivals of coronal mass ejections (CMEs) at the terrestrial planets, including Earth. For the first time, we are able to assess a CME prediction model using data over 2/3 of a solar cycle of observations with the Heliophysics System Observatory. We validate modeling results of 1337 CMEs observed with the Solar Terrestrial Relations Observatory (STEREO) heliospheric imagers (HI) (science data) from 8 years of observations by 5 in situ observing spacecraft. We use the self-similar expansion model for CME fronts assuming 60 degree longitudi…
Using data from the Heliospheric Imagers (HIs) onboard STEREO, it is possible to derive the direction of propagation of coronal mass ejections (CMEs) in addition to their speed with a variety of methods. For CMEs observed by both STEREO spacecraft, it is possible to derive their direction using simultaneous observations from the twin spacecraft and also, using observations from only one spacecraft with fitting methods. This makes it possible to test and compare different analyses techniques. In this article, we propose a new fitting method based on observations from one spacecraft, which we co…
The Solar TErrestrial RElations Observatory (STEREO) and its heliospheric imagers (HI) have provided us the possibility to enhance our understanding of the interplanetary propagation of coronal mass ejections (CMEs). HI-based methods are able to forecast arrival times and speeds at any target and use the advantage of tracing a CME's path of propagation up to 1 AU. In our study we use the ELEvoHI model for CME arrival prediction together with an ensemble approach to derive uncertainties in the modeled arrival time and impact speed. The CME from 3 November 2010 is analyzed by performing 339 mode…
Geometric modelling of Coronal Mass Ejections (CMEs) is a widely used tool for assessing their kinematic evolution. Furthermore, techniques based on geometric modelling, such as ELEvoHI, are being developed into forecast tools for space weather prediction. These models assume that solar wind structure does not affect the evolution of the CME, which is an unquantified source of uncertainty. We use a large number of Cone CME simulations with the HUXt solar wind model to quantify the scale of uncertainty introduced into geometric modelling and the ELEvoHI CME arrival times by solar wind structure…
We present an analysis of small-scale, periodic, solar-wind density enhancements (length-scales as small as \approx 1000 Mm) observed in images from the Heliospheric Imager (HI) aboard STEREO A. We discuss their possible relationship to periodic fluctuations of the proton density that have been identified at 1 AU using in-situ plasma measurements. Specifically, Viall, Kepko, and Spence (2008) examined 11 years of in-situ solar-wind density measurements at 1 AU and demonstrated that not only turbulent structures, but also non-turbulent periodic density structures exist in the solar wind with sc…
Interior to the orbit of Mercury, between 0.07 and 0.21 AU, is a dynamically stable region where a population of asteroids, known as Vulcanoids, may reside. We present the results from our search for Vulcanoids using archival data from the Heliospheric Imager-1 (HI-1) instrument on NASA's two STEREO spacecraft. Four separate observers independently searched through images obtained from 2008-12-10 to 2009-02-28. Roughly, all Vulcanoids with e<=0.15 and i<=15deg will pass through the HI-1 field of view at least twice during this period. No Vulcanoids were detected. Based on the number of synthet…
Accurate forecasting of the arrival time and arrival speed of coronal mass ejections (CMEs) is a unsolved problem in space weather research. In this study, a comparison of the predicted arrival times and speeds for each CME based, independently, on the inputs from the two STEREO vantage points is carried out. We perform hindcasts using ELlipse Evolution model based on Heliospheric Imager observations (ELEvoHI) ensemble modelling. An estimate of the ambient solar wind conditions is obtained by the Wang-Sheeley-Arge/Heliospheric Upwind eXtrapolation (WSA/HUX) model combination that serves as inp…
The Time-of-Arrival (ToA) of coronal mass ejections (CME) at Earth is a key parameter due to the space weather phenomena associated with the CME arrival, such as intense geomagnetic storms. Despite the incremental use of new instrumentation and the development of novel methodologies, ToA estimated errors remain above 10 hours on average. Here, we investigate the prediction of the ToA of CMEs using observations from heliospheric imagers, i.e., from heliocentric distances higher than those covered by the existent coronagraphs. In order to perform this work we analyse 14 CMEs observed by the heli…
Improving the Arrival Time Estimates of Coronal Mass Ejections by Using Magnetohydrodynamic Ensemble Modeling, Heliospheric Imager data, and Machine Learning
The systematic monitoring of the solar wind in high-cadence and high-resolution heliospheric images taken by the Solar-Terrestrial Relation Observatory (STEREO) spacecraft permits the study of the spatial and temporal evolution of variable solar wind flows from the Sun out to 1~AU, and beyond. As part of the EU Framework 7 (FP7) Heliospheric Cataloguing, Analysis and Techniques Service (HELCATS) project, we have generated a catalogue listing the properties of 190 corotating structures well-observed in images taken by the Heliospheric Imager instruments on-board STEREO-A. We present here one of…
In this study, we evaluate a coronal mass ejection (CME) arrival prediction tool that utilizes the wide-angle observations made by STEREO's heliospheric imagers (HI). The unsurpassable advantage of these imagers is the possibility to observe the evolution and propagation of a CME from close to the Sun out to 1 AU and beyond. We believe that by exploiting this capability, instead of relying on coronagraph observations only, it is possible to improve today's CME arrival time predictions. The ELlipse Evolution model based on HI observations (ELEvoHI) assumes that the CME frontal shape within the …
The evolution and propagation of coronal mass ejections (CMEs) in interplanetary space is still not well understood. As a consequence, accurate arrival time and arrival speed forecasts are an unsolved problem in space weather research. In this study, we present the ELlipse Evolution model based on HI observations (ELEvoHI) and introduce a deformable front to this model. ELEvoHI relies on heliospheric imagers (HI) observations to obtain the kinematics of a CME. With the newly developed deformable front, the model is able to react to the ambient solar wind conditions during the entire propagatio…
A study of the kinematics and arrival times of CMEs at Earth, derived from time-elongation maps (J-maps) constructed from STEREO/Heliospheric Imager (HI) observations, provides an opportunity to understand the heliospheric evolution of CMEs in general. We implement various reconstruction techniques, based on the use of time-elongation profiles of propagating CMEs viewed from single or multiple vantage points, to estimate the dynamics of three geo-effective CMEs. We use the kinematic properties, derived from analysis of the elongation profiles, as inputs to the Drag Based Model for the distance…
Aims: Our goal is to develop methodologies to seamlessly track transient solar wind flows viewed by coronagraphs or heliospheric imagers from rapidly varying viewpoints. Methods: We constructed maps of intensity versus time and elongation (J-maps) from Parker Solar Probe (PSP) Wide-field Imager (WISPR) observations during the fourth encounter of PSP. From the J-map, we built an intensity on impact-radius-on-Thomson-surface map (R-map). Finally, we constructed a latitudinal intensity versus time map (Lat-map). Our methodology satisfactorily addresses the challenges associated with the construct…
We present a study of coronal mass ejections (CMEs) which impacted one of the STEREO spacecraft between January 2008 and early 2010. We focus our study on 20 CMEs which were observed remotely by the Heliospheric Imagers (HIs) onboard the other STEREO spacecraft up to large heliocentric distances. We compare the predictions of the Fixed-Phi and Harmonic Mean (HM) fitting methods, which only differ by the assumed geometry of the CME. It is possible to use these techniques to determine from remote-sensing observations the CME direction of propagation, arrival time and final speed which are compar…
The solar wind transients propagating out in the inner heliosphere can be observed in white-light images from Heliospheric Imager-1 (HI1), an instrument of the Sun Earth Connection Coronal and Heliospheric Investigation (SECCHI) on board the Solar Terrestrial Relations Observatory (STEREO), from two perspectives. The spatial velocity distribution inside solar wind transients is key to understanding their dynamic evolution processes. We generated a velocity map of transients in 3D space based on 2D white-light images and used it to estimate the expansion rate as well as some kinematic propertie…
A Coronal Mass Ejection (CME) is an inhomogeneous structure consisting of different features which evolve differently with the propagation of the CME. Simultaneous heliospheric tracking of different observed features of a CME can improve our understanding about relative forces acting on them. It also helps to estimate accurately their arrival times at the Earth and identify them in in- situ data. This also enables to find association between remotely observed features and in-situ observations near the Earth. In this paper, we attempt to continuously track two density enhanced features, one at …
At hard X-ray energies, the bright footpoint emission from solar flare loops often prevents a detailed analysis of the weaker loop-top source morphology due to the limited dynamic range available for X-ray imaging. Here, we study the X1.3 April 25, 2014 flare with the Reuven Ramaty High-Energy Solar Spectroscopic Imager (RHESSI). This partially occulted limb flare allows the analysis of the loop-top emission in isolation. We present results on the flare light curve at different energies, the source morphology from X-ray imaging and a detailed spectral analysis of the different source component…
We present a multiwavelength analysis of the long duration flare observed on 15 April 2002 (soft X-ray peak time at 03:55 UT, SOL2002-04-15T03:55). This flare occurred on the disk (S15W01) in NOAA 9906 and was observed by a number of space instruments including the Extreme-Ultraviolet Imaging Telescope on the Solar and Heliospheric Observatory (SOHO/EIT), the RESIK spectrometer onboard the Coronas-F spacecraft, and the Ramaty High Energy Solar Spectroscopic Imager (RHESSI). We have performed a complex analysis of these measurements and studied the morphology and physical parameters characteriz…
Interplanetary coronal mass ejections (ICMEs) have complex magnetic and density structures, which is the result of their interaction with the structured solar wind and with previous eruptions. ICMEs are revealed by in situ measurements and in the past five years, through remote-sensing observations by heliospheric imagers. However, to understand and analyze these observations often requires the use of numerical modeling. It is because no instruments can yet provide a simple view of ICMEs in two or three dimensions. Numerical simulations can be used to determine the origin of a complex ejecta o…
Heliospheric imagers offer the promise of remote sensing of large-scale structures present in the solar wind. The STEREO/HI-2 imagers, in particular, offer high resolution, very low noise observations of the inner heliosphere but have not yet been exploited to their full potential. This is in part because the signal of interest, Thomson scattered sunlight from free electrons, is ~1000 times fainter than the background visual field in the images, making background subtraction challenging. We have developed a procedure for separating the Thomson-scattered signal from the other background/foregro…
In 2010 May 23-24, SDO observed the launch of two successive coronal mass ejections (CMEs), which were subsequently tracked by the SECCHI suite onboard STEREO. Using the COR2 coronagraphs and the heliospheric imagers (HIs), the initial direction of both CMEs is determined to be slightly west of the Sun-Earth line. We derive the CME kinematics, including the evolution of the CME expansion until 0.4 AU. We find that, during the interaction, the second CME decelerates from a speed above 500 km/s to 380 km/s the speed of the leading edge of the first CME. STEREO observes a complex structure compos…
We present a statistical analysis of coronal mass ejections (CMEs) imaged by the Heliospheric Imager (HI) instruments aboard NASAs twin-spacecraft STEREO mission between April 2007 and August 2017 for STEREO-A and between April 2007 and September 2014 for STEREO-B. The analysis exploits a catalogue that was generated within the FP7 HELCATS project. Here, we focus on the observational characteristics of CMEs imaged in the heliosphere by the inner (HI-1) cameras. More specifically, in this paper we present distributions of the basic observational parameters - namely occurrence frequency, central…
We report the result of the first search for multipoint in situ and imaging observations of interplanetary coronal mass ejections (ICMEs) starting with the first Solar Orbiter (SolO) data in 2020 April - 2021 April. A data exploration analysis is performed including visualizations of the magnetic field and plasma observations made by the five spacecraft SolO, BepiColombo, Parker Solar Probe (PSP), Wind and STEREO-A, in connection with coronagraph and heliospheric imaging observations from STEREO-A/SECCHI and SOHO/LASCO. We identify ICME events that could be unambiguously followed with the STER…
Recently, we developed the Correlation-Aided Reconstruction (CORAR) method to reconstruct solar wind inhomogeneous structures, or transients, using dual-view white-light images (Li et al. 2020; Li et al. 2018). This method is proved to be useful for studying the morphological and dynamical properties of transients like blobs and coronal mass ejection (CME), but the accuracy of reconstruction may be affected by the separation angle between the two spacecraft (Lyu et al. 2020). Based on the dual-view CME events from the Heliospheric Imager CME Join Catalogue (HIJoinCAT) in the HELCATS (Heliosphe…
In this study, we present a new method for forecasting arrival times and speeds of coronal mass ejections (CMEs) at any location in the inner heliosphere. This new approach enables the adoption of a highly flexible geometrical shape for the CME front with an adjustable CME angular width and an adjustable radius of curvature of its leading edge, i.e. the assumed geometry is elliptical. Using, as input, STEREO heliospheric imager (HI) observations, a new elliptic conversion (ElCon) method is introduced and combined with the use of drag-based model (DBM) fitting to quantify the deceleration or ac…
On 2010 April 28 and 29, the Solar TErrestrial Relations Observatory B/Extreme Ultraviolet Imager observed four homologous large-scale coronal waves, the so-called EIT-waves, within 8 hr. All waves emerged from the same source active region, were accompanied by weak flares and faint coronal mass ejections, and propagated into the same direction at constant velocities in the range of ~220-340 km s-1. The last of these four coronal wave events was the strongest and fastest, with a velocity of 337 +/- 31 km s-1 and a peak perturbation amplitude of ~1.24, corresponding to a magnetosonic Mach numbe…
Prediction of the effects of coronal mass ejections (CMEs) on Earth strongly depends on knowledge of the interplanetary magnetic field southward component, Bz. Predicting the strength and duration of Bz inside a CME with sufficient accuracy is currently impossible, which forms the so-called Bz problem. Here, we provide a proof-of-concept of a new method for predicting the CME arrival time, speed, Bz and the resulting Dst index at Earth based only on magnetic field data, measured in situ in the inner heliosphere (< 1AU). On 2012 June 12-16, three approximately Earthward-directed and interacting…
We present the development of SIR-HUXt, the integration of a sequential importance resampling (SIR) data assimilation scheme with the HUXt solar wind model. SIR-HUXt is designed to assimilate the time-elongation profiles of CME fronts in the low heliosphere, such as those typically extracted from heliospheric imager data returned by the STEREO, Parker Solar Probe, and Solar Orbiter missions. We use Observing System Simulation Experiments to explore the performance of SIR-HUXt for a simple synthetic CME scenario of a fully Earth directed CME flowing through a uniform ambient solar wind, where t…
Although coronal mass ejections (CMEs) resembling flux ropes generally expand self-similarly, deformations along their fronts have been reported in observations and simulations. We present evidence of one CME becoming deformed after a period of self-similarly expansion in the corona. The event was observed by multiple white-light imagers on January 20-22, 2021. The change in shape is evident in observations from the heliospheric imagers from the Wide-Field Imager for Solar Probe Plus (WISPR), which observe this CME for $\sim$ 44 hours. We reconstruct the CME using forward-fitting models. In th…
We present the first analysis of internal coronal mass ejection (CME) structure observed very close to the Sun by the Wide-field Imager for Solar PRobe (WISPR) instrument on board Parker Solar Probe (PSP). The transient studied here is a CME observed during PSP's second perihelion passage on 2019 April 2, when PSP was only 40 R_sun from the Sun. The CME was also well observed from 1 au by the STEREO-A spacecraft, which tracks the event all the way from the Sun to 1 au. However, PSP/WISPR observes internal structure not apparent in the images from 1 au. In particular, two linear features are ob…
We investigate the solar phenomena associated with the origin of the solar energetic particle (SEP) event observed on 2013 April 11 by a number of spacecraft distributed in the inner heliosphere over a broad range of heliolongitudes. We use Extreme UltraViolet (EUV) and white-light coronagraph observations from the Solar Dynamics Observatory (SDO), the SOlar and Heliospheric Observatory (SOHO) and the twin Solar TErrestrial RElations Observatory spacecraft (STEREO-A and STEREO-B) to determine the angular extent of the EUV wave and coronal mass ejection (CME) associated with the origin of the S…
We present a new data product, called Space-Weather MDI Active Region Patches (SMARPs), derived from maps of the solar surface magnetic field taken by the Michelson Doppler Imager (MDI) aboard the Solar and Heliospheric Observatory (SoHO). Together with the Space-Weather HMI Active Region Patches (SHARPs), derived from similar maps taken by the Helioseismic and Magnetic Imager (HMI) aboard the Solar Dynamics Observatory, these data provide a continuous and seamless set of maps and keywords that describe every active region observed over the last two solar cycles, from 1996 to the present day. …
The Fixed-Φ(FΦ) and Harmonic Mean (HM) fitting methods are two methods to determine the average direction and velocity of coronal mass ejections (CMEs) from time-elongation tracks produced by Heliospheric Imagers (HIs), such as the HIs onboard the STEREO spacecraft. Both methods assume a constant velocity in their descriptions of the time-elongation profiles of CMEs, which are used to fit the observed time-elongation data. Here, we analyze the effect of aerodynamic drag on CMEs propagating through interplanetary space, and how this drag affects the result of the FΦand HM fitting methods. A sim…
We study three CME/ICME events (2008 June 1-6, 2009 February 13-18, 2010 April 3-5) tracked from Sun to 1 AU in remote-sensing observations of STEREO Heliospheric Imagers and in situ plasma and magnetic field measurements. We focus on the ICME propagation in IP space that is governed by two forces, the propelling Lorentz force and the drag force. We address the question at which heliospheric distance range the drag becomes dominant and the CME gets adjusted to the solar wind flow. To this aim we analyze speed differences between ICMEs and the ambient solar wind flow as function of distance. Th…
The measurement of positions and sizes of radio sources in the observations of solar radio spectral fine structures in an M6.5 flare on April 11, 2013 were observed simultaneously by several radio instruments at four different observatories: Chinese Solar Broadband Radio Spectrometers at Huairou (SBRS/Huairou), Ondrejov Radio spectrograph in the Czech Republic (ORSC/Ondrejov), Badary Broadband Microwave spectropolarimeter (BMS/Irkutsk), and spectrograph/IZMIRAN (Moscow, Troitsk). The fine structures include microwave zebra patterns (ZP), fast pulsations, and fibers. They were observed during t…
We present an analysis of coronal mass ejections (CMEs) observed by the Heliospheric Imagers (HIs) on board NASA's Solar Terrestrial Relations Observatory (STEREO) spacecraft. Between August 2008 and April 2014 we identify 273 CMEs that are observed simultaneously, by the HIs on both spacecraft. For each CME, we track the observed leading edge, as a function of time, from both vantage points, and apply the Stereoscopic Self-Similar Expansion (SSSE) technique to infer their propagation throughout the inner heliosphere. The technique is unable to accurately locate CMEs when their observed leadin…
We studied the presence and spatiotemporal characteristics and evolution of the variations in the differential rotation rates and radial magnetic fields in the Schwabe and Quasi-biennial-oscillation (QBO) timescales. To achieve these objectives, we used rotation rate residuals and radial magnetic field data from the Michelson Doppler Imager on the Solar and Heliospheric Observatory and the Helioseismic and Magnetic Imager on the Solar Dynamics Observatory, extending from May 1996 to August 2020, covering solar cycles 23 and 24, respectively. Under the assumption that the radial surface magneti…
On 2020 April 19 a coronal mass ejection (CME) was detected in situ by Solar Orbiter at a heliocentric distance of about 0.8 AU. The CME was later observed in situ on April 20th by the Wind and BepiColombo spacecraft whilst BepiColombo was located very close to Earth. This CME presents a good opportunity for a triple radial alignment study, as the spacecraft were separated by less than 5$^\circ$ in longitude. The source of the CME, which was launched on April 15th, was an almost entirely isolated streamer blowout. STEREO-A observed the event remotely from -75.1$^\circ$ longitude, which is an e…
The cluster formed by active regions (ARs) NOAA 11121 and 11123, approximately located on the solar central meridian on 11 November 2010, is of great scientific interest. This complex was the site of violent flux emergence and the source of a series of Earth-directed events on the same day. The onset of the events was nearly simultaneously observed by the Atmospheric Imaging Assembly (AIA) telescope aboard the Solar Dynamics Observatory (SDO) and the Extreme-Ultraviolet Imagers (EUVI) on the Sun-Earth Connection Coronal and Heliospheric Investigation (SECCHI) suite of telescopes onboard the So…
We present here an interesting two-step filament eruption during 14-15 March 2015. The filament was located in NOAA AR 12297 and associated with a halo Coronal Mass Ejection (CME). We use observations from the Atmospheric Imaging Assembly (AIA) and Heliospheric Magnetic Imager (HMI) instruments onboard the Solar Dynamics Observatory (SDO), and from the Solar and Heliospheric Observatory (SOHO) Large Angle and Spectrometric Coronagraph (LASCO). We also use H-alpha data from the Global Oscillation Network Group (GONG) telescope and the Kanzelhoehe Solar Observatory. The filament shows a first st…
In this paper, we analyze the full evolution, from a few days prior to the eruption to the initiation, and the final acceleration and propagation, of the CME that occurred on 2008 April 26 using the unprecedented high cadence and multi-wavelength observations by STEREO. There existed frequent filament activities and EUV jets prior to the CME eruption for a few days. These activities were probably caused by the magnetic reconnection in the lower atmosphere driven by photospheric convergence motions, which were evident in the sequence of magnetogram images from MDI (Michelson Doppler Imager) onb…
The Wide-field Imager for Solar PRobe (WISPR) obtained the first high-resolution images of coronal rays at heights below 15 R$_\odot$ when the Parker Solar Probe (PSP) was located inside 0.25 au during the first encounter. We exploit these remarkable images to reveal the structure of coronal rays at scales that are not easily discernible in images taken from near 1 au. To analyze and interpret WISPR observations, which evolve rapidly both radially and longitudinally, we construct a latitude versus time map using the full WISPR dataset from the first encounter. From the exploitation of this map…
The Solar TErrestrial RElations Observatory - \emph{STEREO}, is a system of two identical spacecraft in Heliocentric Earth orbit. We use the two Heliospheric Imagers (HI), which are wide angle imagers with multi-baffle systems to do high precision stellar photometry in order to search for exoplanetary transits and understand stellar variables. The large cadence (40 min for HI-1 and 2 hrs for HI-2), high precision, wide magnitude range (\emph{R} mag - 4 to 12) and broad sky coverage (nearly 20 percent just for HI-1A and 60 per cent of the sky in the zodiacal region for all the instruments combi…
We discuss how simultaneous observations by multiple heliospheric imagers can provide some important information about the azimuthal properties of Coronal Mass Ejections (CMEs) in the heliosphere. We propose two simple models of CME geometry that can be used to derive information about the azimuthal deflection and the azimuthal expansion of CMEs from SECCHI/HI observations. We apply these two models to four CMEs well-observed by both STEREO spacecraft during the year 2008. We find that in three cases, the joint STEREO-A and B observations are consistent with CMEs moving radially outward. In so…
Coronal Mass Ejections (CMEs), as they can inject a large amounts of mass and magnetic flux into the interplanetary space, are the primary source of space weather phenomena on the Earth. The present review first briefly introduces the solar surface signatures of the origins of CMEs and then focuses on the attempts to understand the kinematic evolution of CMEs from the Sun to the Earth. CMEs have been observed in the solar corona in white-light from a series of space missions over the last five decades. In particular, LASCO/SOHO has provided almost continuous coverage of CMEs for more than two …
