Analytical modeling and dynamics of multidomain in metal-ferroelectric-insulator-semiconductor (MFIS)-FETs are presented in this paper. The formation of multi-domain (MD) leads to oscillations in the conduction band in the channel and periodicity in the local electric field in the ferroelectric region. The impact of 2-D local electric field on the MD switching is captured in the model using the domain wall velocity concept. The optimum values of oxide thickness, ferroelectric thickness and channel length are calculated which corresponds to mono-domain device operation. Deviation from the optimum device parameters causes the transition of mono-domain state to multi-domain state in the ferroelectric. This work can be used as a guideline for designing MFIS-NCFETs, which provides the device parameters that leads to monodomain state in the MFIS-NCFET.
This paper analyzes the design space stability of negative capacitance double gate junctionless FETs (NCDG JLFET). Using analytical expressions derived from a charge-based model, we predict instability condition, hysteresis voltage, and critical thickness of the ferroelectric layers giving rise to the negative capacitance behavior. The impact of the technological parameters is investigated in order to ensure hysteresis-free operation. Finally, the stability of NCDG JLFET is predicted over a wide range of temperatures from 77K to 400K. This approach has been assessed with numerical TCAD simulat…
In this paper, we take a fresh look at the physics and operation of Negative Capacitance FETs, and provide unambiguous feedback to the device designers by examining NC-FETs' design space for sub-60 mV/dec Subthreshold Swing (SS). Straightforward design rule is derived, for the first time, based on the capacitor network in NC-FETs. Contrary to many ongoing efforts, it is found that: 1) state-of-the-art MOSFET platforms, such as SOI, FinFET, 2D-FET etc., are not suitable for constructing small-SS NC-FETs, unless internal metal gate is introduced; 2) quantum capacitance prevents NC-FETs from achi…
In this work, we analyze the ferroelectric (FE) domain-wall (DW) induced negative capacitance (NC) effect in Metal-FE-Insulator-Metal (MFIM) and Metal-FE-Insulator-Semiconductor (MFIS) stacks. Our analysis is based on 2D phase field simulations. Considering HZO as the FE material, we study 180 FE domain formation in MFIM and MFIS stacks and their voltage-dependent DW motion. Our analysis signifies that, when FE is in multi-domain (MD) state with soft-DW, the stored energy in the DW leads to non-hysteretic NC effect in FE, which provides an enhanced charge response in the MFIM stack, compared t…
In this paper, an analytical predictive model of the negative capacitance (NC) effect in symmetric long channel double-gate junctionless transistor is proposed based on a charge-based model. In particular, we have investigated the effect of the thickness of the ferroelectric on the I-V characteristics. Importantly, for the first time, our model predicts that the negative capacitance minimizes short channel effects and enhances current overdrive, enabling both low power operation and more efficient transistor size scaling, while the effect on reducing subthreshold slope shows systematic improve…
Since many years, sub-60mV/decade switching has been reported in ferroelectric FETs. However, thus far these reports have lacked full physical explanation since they typically use a negative capacitance in the ferroelectric layer to be able to explain the experimental observations. Because negative capacitance as such is not a physical concept, we propose an alternative model that relies on the non-linear and non-equilibrium behavior of the ferroelectric layer. It is shown that a steep subthreshold slope can be obtained by a 2-step switching process, referred to as nucleation and propagation. …
Large capacitance enhancement is useful for increasing the gate capacitance of field-effect transistors (FETs) to produce low-energy-consuming devices with improved gate controllability. We report strong capacitance enhancement effects in a newly emerged two-dimensional channel material, molybdenum disulfide (MoS2). The enhancement effects are due to strong electron-electron interaction at the low carrier density regime in MoS2. We achieve about 50% capacitance enhancement in monolayer devices and 10% capacitance enhancement in bilayer devices. However, the enhancement effect is not obvious in…
We have demonstrated atomically thin, quantum capacitance-limited, field-effect transistors (FETs) that enable the detection of pH changes with ~75-fold higher sensitivity (4.4 V/pH) over the Nernst value of 59 mV/pH at room temperature when used as a biosensor. The transistors, which are fabricated from a monolayer of MoS2 with a room temperature ionic liquid (RTIL) in place of a conventional oxide gate dielectric, exhibit very low intrinsic noise resulting in a pH limit of detection (LOD) of 92x10^-6 at 10 Hz. This high device performance, which is a function of the structure of our device, …
The elegant simplicity of the device concept and the urgent need for a new "transistor" at the twilight of Moore's law have inspired many researchers in industry and academia to explore the physics and technology of negative capacitance field effect transistor (NC-FET). Although hundreds of papers have been published, the validity of quasi-static NC and the frequency-reliability limits of NC-FET are still being debated. The concept of NC - if conclusively demonstrated - will have broad impacts on device physics and technology development. Here, the authors provide a critical review of recent p…
Two-dimensional (2D) layered materials-based field-effect transistors (FETs) are promising for ultimate scaled electron device applications because of the improved electrostatics to atomically thin body thickness. However, compared with the typical thickness of ~5-nm for Si-on-insulator (SOI), the advantage of the ultimate thickness limit of monolayer for the device performance has not been fully proved yet, especially for the on-state at the accumulation region. Here, we present much stronger quantum-mechanical effect at the accumulation region based on the C-V analysis for top-gate MoS2 FETs…
The ferroelectric polarization switching in ferroelectric hafnium zirconium oxide (Hf0.5Zr0.5O2, HZO) in the HZO/Al2O3 ferroelectric/dielectric stack is investigated systematically by capacitance-voltage and polarization-voltage measurements. The thickness of dielectric layer is found to have a determinant impact on the ferroelectric polarization switching of ferroelectric HZO. A suppression of ferroelectricity is observed with thick dielectric layer. In the gate stacks with thin dielectric layers, a full polarization switching of the ferroelectric layer is found possible by the proposed leaka…
Two-dimensional materials (2DMs) are a promising alternative to complement and upgrade high-frequency electronics. However, in order to boost their adoption, the availability of numerical tools and physically-based models able to support the experimental activities and to provide them with useful guidelines becomes essential. In this context, we propose a theoretical approach that combines numerical simulations and small-signal modeling to analyze 2DM-based FETs for radio-frequency applications. This multi-scale scheme takes into account non-idealities, such as interface traps, carrier velocit…
