This paper investigates the use of LiDAR SLAM as a pose feedback for autonomous flight. Cartographer, LOAM and HDL graph SLAM are first introduced on a conceptual level and later tested for this role. They are first compared offline on a series of datasets to see if they are capable of producing high-quality pose estimates in agile and long-range flight scenarios. The second stage of testing consists of integrating the SLAM algorithms into a cascade PID UAV control system and comparing the control system performance on step excitation signals and helical trajectories. The comparison is based on step response characteristics and several time integral performancecriteria as well as the RMS error between planned and executed trajectory.
Instituto de Telecomunicações（电信研究所）；ISCTE-Instituto Universitário de Lisboa（里斯本大学学院）；CTS-UNINOVA
This paper presents a monocular vision system susceptible of being installed in unmanned small and medium-sized aerial vehicles built to perform missions in forest environments (e.g., search and rescue). The proposed system extends a previous monocular-based technique for trail detection and tracking so as to take into account volumetric data acquired from a Visual SLAM algorithm and, as a result, to increase its sturdiness upon challenging trails. The experimental results, obtained via a set of 12 videos recorded with a camera installed in a tele-operated, unmanned small-sized aerial vehicle,…
SLAMSpoof: Practical LiDAR Spoofing Attacks on Localization Systems Guided by Scan Matching Vulnerability Analysis
Keio University（庆应义塾大学）；the National Institute of Advanced Industrial Science and Technology（独立行政法人产业技术综合研究所）；University of California, Irvine（加利福尼亚大学欧文分校）；Amano Institute of Technology（天野工业大学）
Cross-Session 3D LiDAR and Camera Fusion for Robust Localization of Unmanned Aerial Vehicles in GPS-Denied Environments
School of Electrical and Data Engineering, University of Technology Sydney（悉尼大学电气与数据工程学院）；Institute of Aerospace Engineering and Technology, Duy Tan University（杜益大学航空航天工程与技术学院）；College of Engineering and Computer Science, VinUniversity（Vin大学工程与计算机科学学院）；Smart Green Transformation Center (GREEN-X), VinUniversity（Vin大学智能绿色转型中心 (GREEN-X)）；Department of Artificial Intelligence and Robotics, Sejong University（成均馆大学人工智能与机器人系）
Accurate 3D point cloud map generation is a core task for various robot missions or even for data-driven urban analysis. To do so, light detection and ranging (LiDAR) sensor-based simultaneous localization and mapping (SLAM) technology have been elaborated. To compose a full SLAM system, many odometry and place recognition methods have independently been proposed in academia. However, they have hardly been integrated or too tightly combined so that exchanging (upgrading) either single odometry or place recognition module is very effort demanding. Recently, the performance of each module has be…
School of System Design and Intelligent Manufacturing, Southern University of Science and Technology（南方科技大学系统设计与智能制造学院）
Combining lidar in camera-based simultaneous localization and mapping (SLAM) is an effective method in improving overall accuracy, especially at a large scale outdoor scenario. Recent development of low-cost lidars (e.g. Livox lidar) enable us to explore such SLAM systems with lower budget and higher performance. In this paper we propose CamVox by adapting Livox lidars into visual SLAM (ORB-SLAM2) by exploring the lidars' unique features. Based on the non-repeating nature of Livox lidars, we propose an automatic lidar-camera calibration method that will work in uncontrolled scenes. The long de…
In this work, we propose a lightweight integrated LiDAR-Inertial SLAM system with high efficiency and a great loop closure capacity. We found that the current State-of-the-art LiDAR-Inertial SLAM system has poor performance in loop closure. The LiDAR-Inertial SLAM system often fails with the large drifting and suffers from limited efficiency when faced with large-scale circumstances. In this work, firstly, to improve the speed of the whole LiDAR-Inertial SLAM system, we have proposed a new data structure of the sparse voxel-hashing to enhance the efficiency of the LiDAR-Inertial SLAM system. S…
Light Detection and Ranging (LiDAR) based Simultaneous Localization and Mapping (SLAM) has drawn increasing interests in autonomous driving. However, LiDAR-SLAM suffers from accumulating errors which can be significantly mitigated by Global Navigation Satellite System (GNSS). Precise Point Positioning (PPP), an accurate GNSS operation mode independent of base stations, gains more popularity in unmanned systems. Considering the features of the two technologies, LiDAR-SLAM and PPP, this paper proposes a SLAM system, namely P3-LOAM (PPP based LiDAR Odometry and Mapping) which couples LiDAR-SLAM a…
This paper proposes a 3D LiDAR SLAM algorithm named Ground-SLAM, which exploits grounds in structured multi-floor environments to compress the pose drift mainly caused by LiDAR measurement bias. Ground-SLAM is developed based on the well-known pose graph optimization framework. In the front-end, motion estimation is conducted using LiDAR Odometry (LO) with a novel sensor-centric sliding map introduced, which is maintained by filtering out expired features based on the model of error propagation. At each key-frame, the sliding map is recorded as a local map. The ground nearby is extracted and m…
We present Wildcat, a novel online 3D lidar-inertial SLAM system with exceptional versatility and robustness. At its core, Wildcat combines a robust real-time lidar-inertial odometry module, utilising a continuous-time trajectory representation, with an efficient pose-graph optimisation module that seamlessly supports both the single- and multi-agent settings. The robustness of Wildcat was recently demonstrated in the DARPA Subterranean Challenge where it outperformed other SLAM systems across various types of sensing-degraded and perceptually challenging environments. In this paper, we extens…
Lidar-based simultaneous localization and mapping (SLAM) approaches have obtained considerable success in autonomous robotic systems. This is in part owing to the high-accuracy of robust SLAM algorithms and the emergence of new and lower-cost lidar products. This study benchmarks current state-of-the-art lidar SLAM algorithms with a multi-modal lidar sensor setup showcasing diverse scanning modalities (spinning and solid-state) and sensing technologies, and lidar cameras, mounted on a mobile sensing and computing platform. We extend our previous multi-modal multi-lidar dataset with additional …
In this paper, we present a novel method for integrating 3D LiDAR depth measurements into the existing ORB-SLAM3 by building upon the RGB-D mode. We propose and compare two methods of depth map generation: conventional computer vision methods, namely an inverse dilation operation, and a supervised deep learning-based approach. We integrate the former directly into the ORB-SLAM3 framework by adding a so-called RGB-L (LiDAR) mode that directly reads LiDAR point clouds. The proposed methods are evaluated on the KITTI Odometry dataset and compared to each other and the standard ORB-SLAM3 stereo me…
An accurate and computationally efficient SLAM algorithm is vital for modern autonomous vehicles. To make a lightweight the algorithm, most SLAM systems rely on feature detection from images for vision SLAM or point cloud for laser-based methods. Feature detection through a 3D point cloud becomes a computationally challenging task. In this paper, we propose a feature detection method by projecting a 3D point cloud to form an image and apply the vision-based feature detection technique. The proposed method gives repeatable and stable features in a variety of environments. Based on such features…
Department of Electrical and Electronic Engineering, Imperial College London（帝国理工学院伦敦分校电子与电气工程系）；School of Engineering and Physical Sciences, Heriot-Watt University（赫瑞瓦德大学工程与物理科学学院）
Lincoln Center for Autonomous Systems, University of Lincoln（林肯大学林肯自主系统中心）
In this work, we present a comparative analysis of the trajectories estimated from various Simultaneous Localization and Mapping (SLAM) systems in a simulation environment for vineyards. Vineyard environment is challenging for SLAM methods, due to visual appearance changes over time, uneven terrain, and repeated visual patterns. For this reason, we created a simulation environment specifically for vineyards to help studying SLAM systems in such a challenging environment. We evaluated the following SLAM systems: LIO-SAM, StaticMapping, ORB-SLAM2, and RTAB-MAP in four different scenarios. The mo…
Zhejiang University（浙江大学）；Zhejiang University of Science & Technology（浙江科技学院）
This paper presents a 3D lidar SLAM system based on improved regionalized Gaussian process (GP) map reconstruction to provide both low-drift state estimation and mapping in real-time for robotics applications. We utilize spatial GP regression to model the environment. This tool enables us to recover surfaces including those in sparsely scanned areas and obtain uniform samples with uncertainty. Those properties facilitate robust data association and map updating in our scan-to-map registration scheme, especially when working with sparse range data. Compared with previous GP-SLAM, this work over…
The current LiDAR SLAM (Simultaneous Localization and Mapping) system suffers greatly from low accuracy and limited robustness when faced with complicated circumstances. From our experiments, we find that current LiDAR SLAM systems have limited performance when the noise level in the obtained point clouds is large. Therefore, in this work, we propose a general framework to tackle the problem of denoising and loop closure for LiDAR SLAM in complex environments with many noises and outliers caused by reflective materials. Current approaches for point clouds denoising are mainly designed for smal…
Robert Bosch Corporate Research（罗伯特·博世公司研究部）；Bosch Rexroth AG（博世力士乐股份公司）
Lidar-based SLAM systems perform well in a wide range of circumstances by relying on the geometry of the environment. However, even mature and reliable approaches struggle when the environment contains structureless areas such as long hallways. To allow the use of lidar-based SLAM in such environments, we propose to add reflector markers in specific locations that would otherwise be difficult. We present an algorithm to reliably detect these markers and two approaches to fuse the detected markers with geometry-based scan matching. The performance of the proposed methods is demonstrated on real…
We equip an ultra-wideband (UWB) node and a 2D LiDAR sensor a.k.a. 2D laser rangefinder on a mobile robot, and place UWB beacon nodes at unknown locations in an unknown environment. All UWB nodes can do ranging with each other thus forming a cooperative sensor network. We propose to fuse the peer-to-peer ranges measured between UWB nodes and laser scanning information, i.e. range measured between robot and nearby objects/obstacles, for simultaneous localization of the robot, all UWB beacons, and LiDAR mapping. The fusion is inspired by two facts: 1) LiDAR may improve UWB-only localization accu…
In this paper, we propose a tightly-coupled, multi-modal simultaneous localization and mapping (SLAM) framework, integrating an extensive set of sensors: IMU, cameras, multiple lidars, and Ultra-wideband (UWB) range measurements, hence referred to as VIRAL (visual-inertial-ranging-lidar) SLAM. To achieve such a comprehensive sensor fusion system, one has to tackle several challenges such as data synchronization, multi-threading programming, bundle adjustment (BA), and conflicting coordinate frames between UWB and the onboard sensors, so as to ensure real-time localization and smooth updates in…
Despite the growing interest for autonomous environmental monitoring, effective SLAM realization in native habitats remains largely unsolved. In this paper, we fill this gap by presenting a novel online graph-based SLAM system for 2D LiDAR sensor in natural environments. By taking advantage of robust weighting scheme, sliding-windowed optimization, fast scan-matcher and parallel computing, our system not only delivers stable performance in cluttered surroudings but also meets real-time constraint. Simulated and experimental results confirm the feasibility and efficiency in the overall design o…
Autonomous navigation of robots in harsh and GPS denied subterranean (SubT) environments with lack of natural or poor illumination is a challenging task that fosters the development of algorithms for pose estimation and mapping. Inspired by the need for real-life deployment of autonomous robots in such environments, this article presents an experimental comparative study of 3D SLAM algorithms. The study focuses on state-of-the-art Lidar SLAM algorithms with open-source implementation that are i) lidar-only like BLAM, LOAM, A-LOAM, ISC-LOAM and hdl graph slam, or ii) lidar-inertial like LeGO-LO…
This paper presents Lidar-based Simultaneous Localization and Mapping (SLAM) for autonomous driving vehicles. Fusing data from landmark sensors and a strap-down Inertial Measurement Unit (IMU) in an adaptive Kalman filter (KF) plus the observability of the system are investigated. In addition to the vehicle's states and landmark positions, a self-tuning filter estimates the IMU calibration parameters as well as the covariance of the measurement noise. The discrete-time covariance matrix of the process noise, the state transition matrix, and the observation sensitivity matrix are derived in clo…
Guangdong University of Technology（广东工业大学）；Southern University of Science and Technology（南方科技大学）
2D LiDAR SLAM (Simultaneous Localization and Mapping) is widely used in indoor environments due to its stability and flexibility. However, its mapping procedure is usually operated by a joystick in static environments, while indoor environments often are dynamic with moving objects such as people. The generated map with noisy points due to the dynamic objects is usually incomplete and distorted. To address this problem, we propose a framework of 2D-LiDAR-based SLAM without manual control that effectively excludes dynamic objects (people) and simplify the process for a robot to map an environme…
The LiDAR and inertial sensors based localization and mapping are of great significance for Unmanned Ground Vehicle related applications. In this work, we have developed an improved LiDAR-inertial localization and mapping system for unmanned ground vehicles, which is appropriate for versatile search and rescue applications. Compared with existing LiDAR-based localization and mapping systems such as LOAM, we have two major contributions: the first is the improvement of the robustness of particle swarm filter-based LiDAR SLAM, while the second is the loop closure methods developed for global opt…
Impact of 3D LiDAR Resolution in Graph-based SLAM Approaches: A Comparative Study
University of Coimbra（科英布拉大学）；Data Science Institute, Universität Greifswald（格赖夫斯瓦尔德大学数据科学研究所）；Institute of Computer Science, Freie Universität Berlin（柏林自由大学计算机科学研究所）
We have proposed, to the best of our knowledge, the first-of-its-kind LiDAR-Inertial-Visual-Fused simultaneous localization and mapping (SLAM) system with a strong place recognition capacity. Our proposed SLAM system is consist of visual-inertial odometry (VIO) and LiDAR inertial odometry (LIO) subsystems. We propose the LIO subsystem utilizing the measurement from the LiDAR and the inertial sensors to build the local odometry map, and propose the VIO subsystem which takes in the visual information to construct the 2D-3D associated map. Then, we propose an iterative Kalman Filter-based optimiz…
LiDAR sensors are a powerful tool for robot simultaneous localization and mapping (SLAM) in unknown environments, but the raw point clouds they produce are dense, computationally expensive to store, and unsuited for direct use by downstream autonomy tasks, such as motion planning. For integration with motion planning, it is desirable for SLAM pipelines to generate lightweight geometric map representations. Such representations are also particularly well-suited for man-made environments, which can often be viewed as a so-called "Manhattan world" built on a Cartesian grid. In this work we presen…
The LIght Detection And Ranging (LiDAR) sensor has become one of the most important perceptual devices due to its important role in simultaneous localization and mapping (SLAM). Existing SLAM methods are mainly developed for mechanical LiDAR sensors, which are often adopted by large scale robots. Recently, the solid-state LiDAR is introduced and becomes popular since it provides a cost-effective and lightweight solution for small scale robots. Compared to mechanical LiDAR, solid-state LiDAR sensors have higher update frequency and angular resolution, but also have smaller field of view (FoV), …
Simultaneous localization and mapping (SLAM) has been a hot research field in the past years. Against the backdrop of more affordable 3D LiDAR sensors, research on 3D LiDAR SLAM is becoming increasingly popular. Furthermore, the re-localization problem with a point cloud map is the foundation for other SLAM applications. In this paper, a template matching framework is proposed to re-localize a robot globally in a 3D LiDAR map. This presents two main challenges. First, most global descriptors for point cloud can only be used for place detection under a small local area. Therefore, in order to r…
A Sensor-Aware Phenomenological Framework for Lidar Degradation Simulation and SLAM Robustness Evaluation
Turku Intelligent Embedded and Robotic Systems (TIERS) Lab , University of Turku（图尔库智能嵌入与机器人系统实验室，图尔库大学）；School of Information Science and Technology, Fudan University（信息科学与技术学院，复旦大学）
Robotics Institute, Carnegie Mellon University（卡内基梅隆大学机器人研究所）
Simultaneous Localization and Mapping (SLAM) is a fundamental task to mobile and aerial robotics. LiDAR based systems have proven to be superior compared to vision based systems due to its accuracy and robustness. In spite of its superiority, pure LiDAR based systems fail in certain degenerate cases like traveling through a tunnel. We propose Stereo Visual Inertial LiDAR (VIL) SLAM that performs better on these degenerate cases and has comparable performance on all other cases. VIL-SLAM accomplishes this by incorporating tightly-coupled stereo visual inertial odometry (VIO) with LiDAR mapping …
Doppler-SLAM: Doppler-Aided Radar-Inertial and LiDAR-Inertial Simultaneous Localization and Mapping
Julius-Maximilians-Universität Würzburg（乌尔姆-马克斯-普朗克大学）；Zentrum für Telematik e.V.（电信研究中心）；Nuremberg Institute of Technology Georg Simon Ohm（纽伦堡技术学院 Georg Simon Ohm）；CARIAD SE（CARIAD SE公司）；University of Bonn（波恩大学）；Center for Robotics（机器人中心）；Lamarr Institute for Machine Learning and Artificial Intelligence（Lamarr机器学习与人工智能研究所）
SKiD-SLAM: Robust, Lightweight, and Distributed Multi-Robot LiDAR SLAM in Resource-Constrained Field Environments
Dept. Electr. and Comput. Eng.（电子与计算机工程系）；Inha University（inha大学）；Laboratory for Information & Decision Systems (LIDS)（信息与决策系统实验室）；Massachusetts Institute of Technology（麻省理工学院）
The ubiquitous planes and structural consistency are the most apparent features of indoor multi-story Buildings compared with outdoor environments. In this paper, we propose a tightly coupled LiDAR-Inertial 3D SLAM framework with plane features for the multi-story building. The framework we proposed is mainly composed of three parts: tightly coupled LiDAR-Inertial odometry, extraction of representative planes of the structure, and factor graph optimization. By building a local map and inertial measurement unit (IMU) pre-integration, we get LiDAR scan-to-local-map matching and IMU measurements,…
Singapore University of Technology and Design（新加坡科技设计大学）；Southwest University of Science and Technology（西南科技大学）
Autonomous robots operating in indoor and GPS denied environments can use LiDAR for SLAM instead. However, LiDARs do not perform well in geometrically-degraded environments, due to the challenge of loop closure detection and computational load to perform scan matching. Existing WiFi infrastructure can be exploited for localization and mapping with low hardware and computational cost. Yet, accurate pose estimation using WiFi is challenging as different signal values can be measured at the same location due to the unpredictability of signal propagation. Therefore, we introduce the use of WiFi fi…
German Aerospace Center (DLR)（德国航空航天中心（DLR））；Technical University of Munich（慕尼黑工业大学）
We present the DLR Planetary Stereo, Solid-State LiDAR, Inertial (S3LI) dataset, recorded on Mt. Etna, Sicily, an environment analogous to the Moon and Mars, using a hand-held sensor suite with attributes suitable for implementation on a space-like mobile rover. The environment is characterized by challenging conditions regarding both the visual and structural appearance: severe visual aliasing poses significant limitations to the ability of visual SLAM systems to perform place recognition, while the absence of outstanding structural details, joined with the limited Field-of-View of the utiliz…
University of Maryland, College Park（马里兰大学帕克分校）；U.S. Department of Defense（美国国防部）
We study algorithms for detecting and including glass objects in an optimization-based Simultaneous Localization and Mapping (SLAM) algorithm in this work. When LiDAR data is the primary exteroceptive sensory input, glass objects are not correctly registered. This occurs as the incident light primarily passes through the glass objects or reflects away from the source, resulting in inaccurate range measurements for glass surfaces. Consequently, the localization and mapping performance is impacted, thereby rendering navigation in such environments unreliable. Optimization-based SLAM solutions, w…
Real-time six degree-of-freedom pose estimation with ground vehicles represents a relevant and well studied topic in robotics, due to its many applications, such as autonomous driving and 3D mapping. Although some systems exist already, they are either not accurate or they struggle in real-time setting. In this paper, we propose a fast, accurate and modular LiDAR SLAM system for both batch and online estimation. We first apply downsampling and outlier removal, to filter out noise and reduce the size of the input point clouds. Filtered clouds are then used for pose tracking and floor detection,…
University of Science and Technology of China（中国科学技术大学）
Simultaneous localization and mapping (SLAM) based on laser sensors has been widely adopted by mobile robots and autonomous vehicles. These SLAM systems are required to support accurate localization with limited computational resources. In particular, point cloud registration, i.e., the process of matching and aligning multiple LiDAR scans collected at multiple locations in a global coordinate framework, has been deemed as the bottleneck step in SLAM. In this paper, we propose a feature filtering algorithm, PFilter, that can filter out invalid features and can thus greatly alleviate this bottl…
