In this paper, we focus on a rarely used paradigm in the design of underactuated robot hands: the use of springs as agonists and tendons as antagonists. We formalize this approach in a design matrix also considering its interplay with the underactuation method used (one tendon for multiple joints vs. multiple tendons on one motor shaft). We then show how different cells in this design matrix can be combined in order to facilitate the implementation of desired postural synergies with a single motor. Furthermore, we show that when agonist and antagonist tendons are combined on the same motor shaft, the resulting spring force cancellation can be leveraged to produce multiple desirable behaviors, which we demonstrate in a physical prototype.
Middle East Technical University（中东技术大学）；Robotics and Artificial Intelligence Technologies Application and Research Center（机器人与人工智能技术应用研究中心）
Underactuated legged robots depict highly nonlinear and complex dynamical behaviors that create significant challenges in accurately modeling system dynamics using both first principles and system identification approaches. Hence, it makes a more substantial challenge to design stabilizing controllers. If physical parameters on mathematical models have miscalibrations due to uncertainty in identifying and modeling processes, designed controllers could perform poorly or even result in unstable responses. Moreover, these parameters can certainly change-over-time due to operation and environmenta…
In this paper, we propose a single-actuator gripper that can lift thin objects lying on a flat surface, in addition to the ability as a standard parallel gripper. The key is a crawler on the fingertip, which is underactuated together with other finger joints and switched with a passive and spring-loaded mechanism. While the idea of crawling finger is not a new one, this paper contributes to realize the crawling without additional motor. The gripper can passively change the mode from the parallel approach mode to the pull-in mode, then finally to the power grasp mode, according to the grasping …
A Hybrid passive Linear Inverted Pendulum (HLIP) model is proposed for characterizing, stabilizing and composing periodic orbits for 3D underactuated bipedal walking. Specifically, Period-1 (P1) and Period-2 (P2) orbits are geometrically characterized in the state space of the H-LIP. Stepping controllers are designed for global stabilization of the orbits. Valid ranges of the gains and their optimality are derived. The optimal stepping controller is used to create and stabilize the walking of bipedal robots. An actuated Spring-loaded Inverted Pendulum (aSLIP) model and the underactuated robot …
Southern University of Science and Technology（南方科技大学）；National University of Singapore（新加坡国立大学）；University of Notre Dame（圣母大学）
This paper studies jumping for wheeled-bipedal robots, a motion that takes full advantage of the benefits from the hybrid wheeled and legged design features. A comprehensive hierarchical scheme for motion planning and control of jumping with wheeled-bipedal robots is developed. Underactuation of the wheeled-bipedal dynamics is the main difficulty to be addressed, especially in the planning problem. To tackle this issue, a novel wheeled-spring-loaded inverted pendulum (W-SLIP) model is proposed to characterize the essential dynamics of wheeled-bipedal robots during jumping. Relying on a differe…
This paper presents the design and validation of controlling hopping on the 3D bipedal robot Cassie. A spring-mass model is identified from the kinematics and compliance of the robot. The spring stiffness and damping are encapsulated by the leg length, thus actuating the leg length can create and control hopping behaviors. Trajectory optimization via direct collocation is performed on the spring-mass model to plan jumping and landing motions. The leg length trajectories are utilized as desired outputs to synthesize a control Lyapunov function based quadratic program (CLF-QP). Centroidal angula…
High-Power, Flexible, Robust Hand: Development of Musculoskeletal Hand Using Machined Springs and Realization of Self-Weight Supporting Motion with Humanoid
A long-standing argument in model-based control of locomotion is about the level of complexity that a model should have to define a behavior such as running. Even though goldilocks model based on biomechanical evidence is often sought, it is unclear what complexity level qualifies to be such a model. This dilemma deepens further for bipedal robotic running with point feet, since these robots are underactuated, while tracking center-of-mass (COM) trajectories defined by the spring-loaded inverted pendulum (SLIP) model of running allocates all control inputs, leaving angular coordinates of the r…
Modeling and parametric optimization of 3D tendon-sheath actuator system for upper limb soft exosuit
Indian Institute of Technology Delhi（印度理工学院德里分校）；All India Institute of Medical Sciences（全印度医学科学研究所）；School of Artificial Intelligence, Indian Institute of Technology Delhi（印度理工学院德里分校人工智能学院）
We present the design, implementation, and experimental evaluation of a low-cost, customizable, easy-to-use transradial hand prosthesis capable of adapting its compliance. Variable stiffness actuation (VSA) of the prosthesis is based on antagonistically arranged tendons coupled to nonlinear springs driven through a Bowden cable-based power transmission. Bowden cable-based antagonistic VSA can, not only regulate the stiffness and the position of the prosthetic hand, but also enables a light-weight and low-cost design, by opportunistic placement of motors, batteries and controllers on any conven…
