Software quality is one of the essential aspects of a software. With increasing demand, software designs are becoming more complex, increasing the probability of software defects. Testers improve the quality of software by fixing defects. Hence the analysis of defects significantly improves software quality. The complexity of software also results in a higher number of defects, and thus manual detection can become a very time-consuming process. This gave researchers incentives to develop techniques for automatic software defects detection. In this paper, we try to analyze the state of the art machine learning algorithms' performance for software defect classification. We used seven datasets from the NASA promise dataset repository for this research work. The performance of Neural Networks and Gradient Boosting classifier dominated other algorithms.
In recent years, defect prediction, one of the major software engineering problems, has been in the focus of researchers since it has a pivotal role in estimating software errors and faulty modules. Researchers with the goal of improving prediction accuracy have developed many models for software defect prediction. However, there are a number of critical conditions and theoretical problems in order to achieve better results. In this paper, two deep learning models, Stack Sparse Auto-Encoder (SSAE) and Deep Belief Network (DBN), are deployed to classify NASA datasets, which are unbalanced and h…
Universidad de Guadalajara（瓜达拉哈拉大学）；Applied Science Private University（应用科学私立大学）；University of Sharjah（沙迦大学）；University of Detroit Mercy（底特律梅西大学）
An important product measure to determine the effectiveness of software processes is the defect density (DD). In this study, we propose the application of support vector regression (SVR) to predict the DD of new software projects obtained from the International Software Benchmarking Standards Group (ISBSG) Release 2018 data set. Two types of SVR (e-SVR and v-SVR) were applied to train and test these projects. Each SVR used four types of kernels. The prediction accuracy of each SVR was compared to that of a statistical regression (i.e., a simple linear regression, SLR). Statistical significance…
National University of Sciences and Technology（国家科技大学）
Software testing is one of the important ways to ensure the quality of software. It is found that testing cost more than 50% of overall project cost. Effective and efficient software testing utilizes the minimum resources of software. Therefore, it is important to construct the procedure which is not only able to perform the efficient testing but also minimizes the utilization of project resources. The goal of software testing is to find maximum defects in the software system. More the defects found in the software ensure more efficiency is the software testing Different techniques have been p…
This report summarises the outcomes of a systematic literature search to identify Bayesian network models used to support decision making in healthcare. After describing the search methodology, the selected research papers are briefly reviewed, with the view to identify publicly available models and datasets that are well suited to analysis using the causal interventional analysis software tool developed in Wang B, Lyle C, Kwiatkowska M (2021). Finally, an experimental evaluation of applying the software on a selection of models is carried out and preliminary results are reported.
State Key Laboratory for Novel Software Technology, Nanjing University（南京大学计算机软件新技术国家重点实验室）；Department of Computer Science and Technology, Nanjing University（南京大学计算机科学与技术系）；Institute for Interdisciplinary Information Sciences, Tsinghua University（清华大学交叉信息研究院）
Accurate software defect prediction could help software practitioners allocate test resources to defect-prone modules effectively and efficiently. In the last decades, much effort has been devoted to build accurate defect prediction models, including developing quality defect predictors and modeling techniques. However, current widely used defect predictors such as code metrics and process metrics could not well describe how software modules change over the project evolution, which we believe is important for defect prediction. In order to deal with this problem, in this paper, we propose to u…
University of Alcala（阿尔卡拉大学）；University of the Basque Country（巴斯克大学）；University of Oviedo（奥维耶多大学）；University of Tartu（塔尔图大学）
In this work we apply several Poisson and zero-inflated models for software defect prediction. We apply different functions from several R packages such as pscl, MASS, R2Jags and the recent glmmTMB. We test the functions using the Equinox dataset. The results show that Zero-inflated models, fitted with either maximum likelihood estimation or with Bayesian approach, are slightly better than other models, using the AIC as selection criterion.
Many researchers assume that, for software analytics, "more data is better." We write to show that, at least for learning defect predictors, this may not be true. To demonstrate this, we analyzed hundreds of popular GitHub projects. These projects ran for 84 months and contained 3,728 commits (median values). Across these projects, most of the defects occur very early in their life cycle. Hence, defect predictors learned from the first 150 commits and four months perform just as well as anything else. This means that, at least for the projects studied here, after the first few months, we need …
Software defect prediction is an important aspect of preventive maintenance of a software. Many techniques have been employed to improve software quality through defect prediction. This paper introduces an approach of defect prediction through a machine learning algorithm, support vector machines (SVM), by using the code smells as the factor. Smell prediction model based on support vector machines was used to predict defects in the subsequent releases of the eclipse software. The results signify the role of smells in predicting the defects of a software. The results can further be used as a ba…
Beihang University（北京航空航天大学）；Brunel University London（伦敦布鲁内尔大学）
Context: Software engineering researchers have undertaken many experiments investigating the potential of software defect prediction algorithms. Unfortunately, some widely used performance metrics are known to be problematic, most notably F1, but nevertheless F1 is widely used. Objective: To investigate the potential impact of using F1 on the validity of this large body of research. Method: We undertook a systematic review to locate relevant experiments and then extract all pairwise comparisons of defect prediction performance using F1 and the un-biased Matthews correlation coefficient (MCC). …
In current research, there are contrasting results about the applicability of software source code metrics as features for defect prediction models. The goal of the paper is to evaluate the adoption of software metrics in models for software defect prediction, identifying the impact of individual source code metrics. With an empirical study on 275 release versions of 39 Java projects mined from GitHub, we compute 12 software metrics and collect software defect information. We train and compare three defect classification models. The results across all projects indicate that Decision Tree (DT) …
Defect prediction can be a powerful tool to guide the use of quality assurance resources. However, while lots of research covered methods for defect prediction as well as methodological aspects of defect prediction research, the actual cost saving potential of defect prediction is still unclear. Within this article, we close this research gap and formulate a cost model for software defect prediction. We derive mathematically provable boundary conditions that must be fulfilled by defect prediction models such that there is a positive profit when the defect prediction model is used. Our cost mod…
In recent years, defect prediction has received a great deal of attention in the empirical software engineering world. Predicting software defects before the maintenance phase is very important not only to decrease the maintenance costs but also increase the overall quality of a software product. There are different types of product, process, and developer based software metrics proposed so far to measure the defectiveness of a software system. This paper suggests to use a novel set of software metrics which are based on the similarities detected among the source code files in a software proje…
Data originating from open-source software projects provide valuable information to enhance software quality. In the scope of Software Defect Prediction, one of the most challenging parts is extracting valid data about failure-prone software components from these repositories, which can help develop more robust software. In particular, collecting data, calculating metrics, and synthesizing results from these repositories is a tedious and error-prone task, which often requires understanding the programming languages involved in the mined repositories, eventually leading to a proliferation of la…
Defect prevention is the most vital but habitually neglected facet of software quality assurance in any project. If functional at all stages of software development, it can condense the time, overheads and wherewithal entailed to engineer a high quality product. The key challenge of an IT industry is to engineer a software product with minimum post deployment defects. This effort is an analysis based on data obtained for five selected projects from leading software companies of varying software production competence. The main aim of this paper is to provide information on various methods and p…
Large organizations have diverse product offerings to meet various business needs. To increase revenue, its common these days to offer software products as integrated product suite(s) rather than individual products. Creating and maintaining high quality software products within the integrated product suite requires rigorous product engineering methods. The sheer size of products and dependencies involved tend to raise unidentified defects that may become critical post product upgrades or after every release cycle. It is difficult to track such defects and its widespread across underlying sub-…
Explaining the prediction results of software defect prediction models is a challenging while practical task, which can provide useful information for developers to understand and fix the predicted bugs. To address this issue, recently, Jiarpakdee et al. proposed to use {two state-of-the-art} model-agnostic techniques (i.e., LIME and BreakDown) to explain the prediction results of bug prediction models. Their experiments show these tools can generate promising results and the generated explanations can assist developers understand the prediction results. However, the fact that LIME and BreakDo…
In a critical software system, the testers have to spend an enormous amount of time and effort to maintain the software due to the continuous occurrence of defects. Among such defects, some severe defects may adversely affect the software. To reduce the time and effort of a tester, many machine learning models have been proposed in the literature, which use the documented defect reports to automatically predict the severity of the defective software modules. In contrast to the traditional approaches, in this work we propose a metric-based software defect severity prediction (SDSP) model that u…
Software engineering is continuously facing the challenges of growing complexity of software packages and increased level of data on defects and drawbacks from software production process. This makes a clarion call for inventions and methods which can enable a more reusable, reliable, easily maintainable and high quality software systems with deeper control on software generation process. Quality and productivity are indeed the two most important parameters for controlling any industrial process. Implementation of a successful control system requires some means of measurement. Software metrics…
Nowadays, Software Process Improvement popularly known as SPI has been able to receive an immense concern in the continuous process to purify software quality. Several Agile methodologies previously have worked with Extreme programming (XP). Before improving the process, defect prevention (DP) is inevitable. In addition, DP largely depends on defect detection either found earlier in the design and implementation stages or held in the testing phases. However, testing maturity model integration (TMMI) has a crucial aspect in DP as well as process improvement of the software. In particular, when …
Machine Learning approaches are good in solving problems that have less information. In most cases, the software domain problems characterize as a process of learning that depend on the various circumstances and changes accordingly. A predictive model is constructed by using machine learning approaches and classified them into defective and non-defective modules. Machine learning techniques help developers to retrieve useful information after the classification and enable them to analyse data from different perspectives. Machine learning techniques are proven to be useful in terms of software …
IT industry should inculcate effective defect management on a continual basis to deploy nearly a zerodefect product to their customers. Inspection is one of the most imperative and effective strategies of defect management. Nevertheless, existing defect management strategies in leading software industries are successful to deliver a maximum of 96% defect-free product. An empirical study of various projects across several service-based and product-based industries proves the above affirmations. This paper provides an enhanced approach of inspection through a Four-Step Approach Model of Inspecti…
Software design is one of the most important and key activities in the system development life cycle (SDLC) phase that ensures the quality of software. Different key areas of design are very vital to be taken into consideration while designing software. Software design describes how the software system is decomposed and managed in smaller components. Object-oriented (OO) paradigm has facilitated software industry with more reliable and manageable software and its design. The quality of the software design can be measured through different metrics such as Chidamber and Kemerer (CK) design metri…
Software is a unique entity that has laid a strong impact on all other fields either related or not related to software. These include medical, scientific, business, educational, defence, transport, telecommunication to name a few. State-of-the-art professional domain activities demands the development of high quality software. High quality software attributes to a defect-free product, which is competent of producing predictable results and remains deliverable within time and cost constraints. It should be manageable with minimum interferences. It should also be maintainable, dependable, under…
Defect estimation and prediction are some of the main modulating factors for the success of software projects in any software industry. Maturity and competency of a project manager in efficient prediction and estimation of resource capabilities are one of the strategic driving forces towards the generation of high quality software. Currently, there are no estimation techniques developed through empirical analysis to evaluate the decision capability of a project manager towards resource allocation for effective defect management. This paper brings out an empirical study carried out in a product…
Today, most automated test generators, such as search-based software testing (SBST) techniques focus on achieving high code coverage. However, high code coverage is not sufficient to maximise the number of bugs found, especially when given a limited testing budget. In this paper, we propose an automated test generation technique that is also guided by the estimated degree of defectiveness of the source code. Parts of the code that are likely to be more defective receive more testing budget than the less defective parts. To measure the degree of defectiveness, we leverage Schwa, a notable defec…
Software defect prediction is an essential task during the software development Lifecycle as it can help managers to identify the most defect-proneness modules. Thus, it can reduce the test cost and assign testing resources efficiently. Many classification methods can be used to determine if the software is defective or not. Support Vector Machine (SVM) has not been used extensively for such problems because of its instability when applied on different datasets and parameter settings. The main parameter that influences the accuracy is the choice of the kernel function. The use of kernel functi…
DBBRBF- Convalesce optimization for software defect prediction problem using hybrid distribution base balance instance selection and radial basis Function classifier
In the past 20 years, defect prediction studies have generally acknowledged the effect of class size on software prediction performance. To quantify the relationship between object-oriented (OO) metrics and defects, modelling has to take into account the direct, and potentially indirect, effects of class size on defects. However, some studies have shown that size cannot be simply controlled or ignored, when building prediction models. As such, there remains a question whether, and when, to control for class size. This study provides a new in-depth examination of the impact of class size on the…
Applying software defect esimation techniques and presenting this information in a compact and impactful decision table can clearly illustrate to collaborative groups how critical this position is in the overall development cycle. The Test Risk Matrix described here has proven to be a valuable addition to the management tools and approaches used in developing large scale software on several releases. Use of this matrix in development planning meetings can clarify the attendant risks and possible consequences of carrying out or bypassing specific test activities.
Defects are common in software systems and can potentially cause various problems to software users. Different methods have been developed to quickly predict the most likely locations of defects in large code bases. Most of them focus on designing features (e.g. complexity metrics) that correlate with potentially defective code. Those approaches however do not sufficiently capture the syntax and different levels of semantics of source code, an important capability for building accurate prediction models. In this paper, we develop a novel prediction model which is capable of automatically learn…
One truism of deep learning is that the automatic feature engineering (seen in the first layers of those networks) excuses data scientists from performing tedious manual feature engineering prior to running DL. For the specific case of deep learning for defect prediction, we show that that truism is false. Specifically, when we preprocess data with a novel oversampling technique called fuzzy sampling, as part of a larger pipeline called GHOST (Goal-oriented Hyper-parameter Optimization for Scalable Training), then we can do significantly better than the prior DL state of the art in 14/20 defec…
Defect Prevention is the most critical but most neglected component of the software quality assurance in any project. If applied at all stages of software development, it can reduce the time, cost and resources required to engineer a high quality product. Software inspection has proved to be the most effective and efficient technique enabling defect detection and prevention. Inspections carried at all phases of software life cycle have proved to be most beneficial and value added to the attributes of the software. Work is an analysis based on the data collected for three different projects fro…
Context: There is considerable diversity in the range and design of computational experiments to assess classifiers for software defect prediction. This is particularly so, regarding the choice of classifier performance metrics. Unfortunately some widely used metrics are known to be biased, in particular F1. Objective: We want to understand the extent to which the widespread use of the F1 renders empirical results in software defect prediction unreliable. Method: We searched for defect prediction studies that report both F1 and the Matthews correlation coefficient (MCC). This enabled us to det…
Accurately predicting faulty software units helps practitioners target faulty units and prioritize their efforts to maintain software quality. Prior studies use machine-learning models to detect faulty software code. We revisit past studies and point out potential improvements. Our new study proposes a revised benchmarking configuration. The configuration considers many new dimensions, such as class distribution sampling, evaluation metrics, and testing procedures. The new study also includes new datasets and models. Our findings suggest that predictive accuracy is generally good. However, pre…
This dissertation presents an evaluation of several language models on software defect datasets. A language Model (LM) "can provide word representation and probability indication of word sequences as the core component of an NLP system." Language models for source code are specified for tasks in the software engineering field. While some models are directly the NLP ones, others contain structural information that is uniquely owned by source code. Software defects are defects in the source code that lead to unexpected behaviours and malfunctions at all levels. This study provides an original at…
Over the past decade, deep learning (DL) has been successfully applied to many industrial domain-specific tasks. However, the current state-of-the-art DL software still suffers from quality issues, which raises great concern especially in the context of safety- and security-critical scenarios. Adversarial examples (AEs) represent a typical and important type of defects needed to be urgently addressed, on which a DL software makes incorrect decisions. Such defects occur through either intentional attack or physical-world noise perceived by input sensors, potentially hindering further industry d…
Japan Advanced Institute of Information Technology（日本信息学研究所）；Le Quy Don Technical University（黎魁东技术大学）
Existing defects in software components is unavoidable and leads to not only a waste of time and money but also many serious consequences. To build predictive models, previous studies focus on manually extracting features or using tree representations of programs, and exploiting different machine learning algorithms. However, the performance of the models is not high since the existing features and tree structures often fail to capture the semantics of programs. To explore deeply programs' semantics, this paper proposes to leverage precise graphs representing program execution flows, and deep …
Automated test generators, such as search based software testing (SBST) techniques, replace the tedious and expensive task of manually writing test cases. SBST techniques are effective at generating tests with high code coverage. However, is high code coverage sufficient to maximise the number of bugs found? We argue that SBST needs to be focused to search for test cases in defective areas rather in non-defective areas of the code in order to maximise the likelihood of discovering the bugs. Defect prediction algorithms give useful information about the bug-prone areas in software. Therefore, w…
Breaking New Ground in Software Defect Prediction: Introducing Practical and Actionable Metrics with Superior Predictive Power for Enhanced Decision-Making
With software system complexity leading to the rise of software defects, research efforts have been done on techniques towards predicting software defects and Just-in-time (JIT) defect prediction which predicts whether a code change is defective. While using features to determine potentially defective code change, inspection effort is still significant. As code change can impact several files, we investigate an open source project to identify potential gaps with features in JIT perspective. In addition, with a lack of publicly available JIT dataset that link the features with actual commits, w…
Software defect prediction models are classifiers that are constructed from historical software data. Such software defect prediction models have been proposed to help developers optimize the limited Software Quality Assurance (SQA) resources and help managers develop SQA plans. Prior studies have different goals for their defect prediction models and use different techniques for generating visual explanations of their models. Yet, it is unclear what are the practitioners' perceptions of (1) these defect prediction model goals, and (2) the model-agnostic techniques used to visualize these mode…
Software dependency network metrics extracted from the dependency graph of the software modules by the application of Social Network Analysis (SNA metrics) have been shown to improve the performance of the Software Defect prediction (SDP) models. However, the relative effectiveness of these SNA metrics over code metrics in improving the performance of the SDP models has been widely debated with no clear consensus. Furthermore, some of the common SDP scenarios like predicting the number of defects in a module (Defect-count) in Cross-version and Cross-project SDP contexts remain unexplored. Such…
