Quantum annealers have been designed to propose near-optimal solutions to NP-hard optimization problems. However, the accuracy of current annealers such as the ones of D-Wave Systems, Inc., is limited by environmental noise and hardware biases. One way to deal with these imperfections and to improve the quality of the annealing results is to apply a variety of pre-processing techniques such as spin reversal (SR), anneal offsets (AO), or chain weights (CW). Maximizing the effectiveness of these techniques involves performing optimizations over a large number of parameters, which would be too costly if needed to be done for each new problem instance. In this work, we show that the aforementioned parameter optimization can be done for an entire class of problems, given each instance uses a previously chosen fixed embedding. Specifically, in the training phase, we fix an embedding E of a complete graph onto the hardware of the annealer, and then run an optimization algorithm to tune the following set of parameter values: the set of bits to be flipped for SR, the specific qubit offsets for AO, and the distribution of chain weights, optimized over a set of training graphs randomly chosen from that class, where the graphs are embedded onto the hardware using E. In the testing phase, we estimate how well the parameters computed during the training phase work on a random selection of other graphs from that class. We investigate graph instances of varying densities for the Maximum Clique, Maximum Cut, and Graph Partitioning problems. Our results indicate that, compared to their default behavior, substantial improvements of the annealing results can be achieved by using the optimized parameters for SR, AO, and CW.
Classical and quantum annealing are two heuristic optimization methods that search for an optimal solution by slowly decreasing thermal or quantum fluctuations. Optimizing annealing schedules is important both for performance and fair comparisons between classical annealing, quantum annealing, and other algorithms. Here we present a heuristic approach for the optimization of annealing schedules for quantum annealing and apply it to 3D Ising spin glass problems. We find that if both classical and quantum annealing schedules are similarly optimized, classical annealing outperforms quantum anneal…
Los Alamos National Laboratory（洛斯阿拉莫斯国家实验室）；University of New Mexico（新墨西哥大学）
Quantum Annealing (QA) was originally intended for accelerating the solution of combinatorial optimization tasks that have natural encodings as Ising models. However, recent experiments on QA hardware platforms have demonstrated that, in the operating regime corresponding to weak interactions, the QA hardware behaves like a noisy Gibbs sampler at a hardware-specific effective temperature. This work builds on those insights and identifies a class of small hardware-native Ising models that are robust to noise effects and proposes a procedure for executing these models on QA hardware to maximize …
Minor embedding heuristics have become an indispensable tool for compiling problems in quadratically unconstrained binary optimization (QUBO) into the hardware graphs of quantum and CMOS annealing processors. While recent embedding heuristics have been developed for annealers of moderate size (about 2000 nodes) the size of the latest CMOS annealing processor (with 102,400 nodes) poses entirely new demands on the embedding heuristic. This raises the question, if recent embedding heuristics can maintain meaningful embedding performance on hardware graphs of increasing size. Here, we develop an i…
As a wide variety of quantum computing platforms become available, methods for assessing and comparing the performance of these devices are of increasing interest and importance. Inspired by the success of single-qubit error rate computations for tracking the progress of gate-based quantum computers, this work proposes a Quantum Annealing Single-qubit Assessment (QASA) protocol for quantifying the performance of individual qubits in quantum annealing computers. The proposed protocol scales to large quantum annealers with thousands of qubits and provides unique insights into the distribution of…
University of Kentucky（肯塔基大学）；Oak Ridge National Laboratory（橡树岭国家实验室）
Optimizing the training of a machine learning pipeline helps in reducing training costs and improving model performance. One such optimizing strategy is quantum annealing, which is an emerging computing paradigm that has shown potential in optimizing the training of a machine learning model. The implementation of a physical quantum annealer has been realized by D-Wave systems and is available to the research community for experiments. Recent experimental results on a variety of machine learning applications using quantum annealing have shown interesting results where the performance of classic…
Quantum annealing is a practical approach to approximately implement the adiabatic quantum computational model under a real-world setting. The goal of an adiabatic algorithm is to prepare the ground state of a problem-encoded Hamiltonian at the end of an annealing path. This is typically achieved by driving the dynamical evolution of a quantum system slowly to enforce adiabaticity. Properly optimized annealing schedules often significantly accelerate the computational process. Inspired by the recent success of deep reinforcement learning such as DeepMind's AlphaZero, we propose a Monte Carlo T…
Pegasus is a graph which offers substantially increased connectivity between the qubits of quantum annealing hardware compared to the graph Chimera. It is the first fundamental change in the connectivity graph of quantum annealers built by D-Wave since Chimera was introduced in 2009 and then used in 2011 for D-Wave's first commercial quantum annealer. In this article we describe an algorithm which defines the connectivity of Pegasus and we provide what we believe to be the best way to graphically visualize Pegasus in order to see which qubits couple to each other. As supplemental material, we …
Over the past decade, the usefulness of quantum annealing hardware for combinatorial optimization has been the subject of much debate. Thus far, experimental benchmarking studies have indicated that quantum annealing hardware does not provide an irrefutable performance gain over state-of-the-art optimization methods. However, as this hardware continues to evolve, each new iteration brings improved performance and warrants further benchmarking. To that end, this work conducts an optimization performance assessment of D-Wave Systems' most recent Advantage Performance Update computer, which can n…
Current quantum annealing (QA) hardware suffers from practical limitations such as finite temperature, sparse connectivity, small qubit numbers, and control error. We propose new algorithms for mapping boolean constraint satisfaction problems (CSPs) onto QA hardware mitigating these limitations. In particular we develop a new embedding algorithm for mapping a CSP onto a hardware Ising model with a fixed sparse set of interactions, and propose two new decomposition algorithms for solving problems too large to map directly into hardware. The mapping technique is locally-structured, as hardware c…
Extending the computational reach of Quantum Annealing using Reverse Annealing
Goethe University Frankfurt（法兰克福歌德大学）；Institute of Computer Science, Goethe University Frankfurt（法兰克福歌德大学计算机科学研究所）；Modular Supercomputing and Quantum Computing, Institute of Computer Science, Goethe University Frankfurt（法兰克福歌德大学计算机科学系模块化超级计算与量子计算）；Jülich Supercomputing Centre, Forschungszentrum Jülich GmbH（于利希超算中心，于利希研究中心有限公司）
Quantum(-inspired) annealers show promise in solving combinatorial optimisation problems in practice. There has been extensive researches demonstrating the utility of D-Wave quantum annealer and quantum-inspired annealer, i.e., Fujitsu Digital Annealer on various applications, but few works are comparing these platforms. In this paper, we benchmark quantum(-inspired) annealers with three combinatorial optimisation problems ranging from generic scientific problems to complex problems in practical use. In the case where the problem size goes beyond the capacity of a quantum(-inspired) computer, …
In order to treat all-to-all connected quadratic binary optimization problems (QUBO) with hardware quantum annealers, an embedding of the original problem is required due to the sparsity of the hardware's topology. Embedding fully-connected graphs - typically found in industrial applications - incurs a quadratic space overhead and thus a significant overhead in the time to solution. Here we investigate this embedding penalty of established planar embedding schemes such as minor embedding on a square lattice, minor embedding on a Chimera graph, and the Lechner-Hauke-Zoller scheme using simulate…
The compression of geometry data is an important aspect of bandwidth-efficient data transfer for distributed 3d computer vision applications. We propose a quantum-enabled lossy 3d point cloud compression pipeline based on the constructive solid geometry (CSG) model representation. Key parts of the pipeline are mapped to NP-complete problems for which an efficient Ising formulation suitable for the execution on a Quantum Annealer exists. We describe existing Ising formulations for the maximum clique search problem and the smallest exact cover problem, both of which are important building blocks…
Quantum annealing solves combinatorial optimization problems by finding the energetic ground states of an embedded Hamiltonian. However, quantum annealing dynamics under the embedded Hamiltonian may violate the principles of adiabatic evolution and generate excitations that correspond to errors in the computed solution. Here we empirically benchmark the probability of chain breaks and identify sweet spots for solving a suite of embedded Hamiltonians. We further correlate the physical location of chain breaks in the quantum annealing hardware with the underlying embedding technique and use thes…
Optimization of pre-production vehicle configurations is one of the challenges in the automotive industry. Given a list of tests requiring cars with certain features, it is desirable to find the minimum number of cars that cover the tests and obey the configuration rules. In this paper, we model the problem in the framework of satisfiability and solve it by utilizing the newly introduced hybrid constrained quadratic model (CQM) solver provided by D-Wave. The problem definition is based on the "Optimizing the Production of Test Vehicles" use case given in the BMW Quantum Computing Challenge. We…
Although quantum computing hardware has evolved significantly in recent years, spurred by increasing industrial and government interest, the size limitation of current generation quantum computers remains an obstacle when applying these devices to relevant, real-world problems. In order to effectively exploit the potential benefits of quantum computing, heterogeneous approaches that combine both classical and quantum computing techniques are needed. In this work, we explore multiple heterogeneous approaches to solving multiple industry-relevant benchmark problems in order to understand how bes…
We propose a modified quantum annealing protocol, i. e., pulsed quantum annealing} (PQA), in order to increase the success probability by a pulse application during the quantum annealing process. It is well known that the success probability of the conventional quantum annealing is reduced due to the Landau-Zener transitions. By applying a pulse to the system, we modulate the success probability and increase it, compared to the conventional quantum annealing, by optimizing the pulse parameters. We demonstrate our findings for a single qubit both numerically and analytically. The analytical mod…
We provide a reusability report of the method presented by Chen et al. in "Optimizing quantum annealing schedules with Monte Carlo tree search enhanced with neural networks" and add further benchmarks on Max-Cut problems.
We propose a quantum annealing protocol that more effectively probes the dynamics of a single qubit on D-Wave's quantum annealing hardware. This protocol uses D-Wave's h-gain schedule functionality, which allows the rapid quenching of the longitudinal magnetic field at arbitrary points during the anneal. This features enables us to distinguish between open and closed system dynamics as well as the presence or absence of longitudinal magnetic field noise. We show that both thermal and magnetic field fluctuations are key sources of noise that need to be included in an open quantum system model t…
California Institute of Technology（加州理工学院）；Harvard University（哈佛大学）；Fermi National Accelerator Laboratory（费米国家加速器实验室）；University of California San Diego（加州大学圣迭戈分校）；Lockheed Martin Corporation（洛克希德·马丁公司）；University of Southern California（南加州大学）
At the High Luminosity Large Hadron Collider (HL-LHC), traditional track reconstruction techniques that are critical for analysis are expected to face challenges due to scaling with track density. Quantum annealing has shown promise in its ability to solve combinatorial optimization problems amidst an ongoing effort to establish evidence of a quantum speedup. As a step towards exploiting such potential speedup, we investigate a track reconstruction approach by adapting the existing geometric Denby-Peterson (Hopfield) network method to the quantum annealing framework and to HL-LHC conditions. F…
In order to meet mobile cellular users' ever-increasing data demands, today's 4G and 5G networks are designed mainly with the goal of maximizing spectral efficiency. While they have made progress in this regard, controlling the carbon footprint and operational costs of such networks remains a long-standing problem among network designers. This paper takes a long view on this problem, envisioning a NextG scenario where the network leverages quantum annealing for cellular baseband processing. We gather and synthesize insights on power consumption, computational throughput and latency, spectral e…
Noisy intermediate-scale quantum (NISQ) hardware is almost universally incompatible with full-scale optimization problems of practical importance which can have many variables and unwieldy objective functions. As a consequence, there is a growing body of literature that tests quantum algorithms on miniaturized versions of problems that arise in an operations research setting. Rather than taking this approach, we investigate a problem of substantial commercial value, multi-truck vehicle routing for supply chain logistics, at the scale used by a corporation in their operations. Such a problem is…
While quantum computing proposes promising solutions to computational problems not accessible with classical approaches, due to current hardware constraints, most quantum algorithms are not yet capable of computing systems of practical relevance, and classical counterparts outperform them. To practically benefit from quantum architecture, one has to identify problems and algorithms with favorable scaling and improve on corresponding limitations depending on available hardware. For this reason, we developed an algorithm that solves integer linear programming problems, a classically NP-hard prob…
Sampling all ground states of a Hamiltonian with equal probability is a desired feature of a sampling algorithm, but recent studies indicate that common variants of transverse field quantum annealing sample the ground state subspace unfairly. In this note, we present perturbation theory arguments suggesting that this deficiency can be corrected by employing reverse annealing-inspired paths. We confirm that this conclusion holds in simulations of previously studied small instances with degeneracy, as well as larger instances on quantum annealing hardware.
The recent emergence of novel computational devices, such as quantum computers, coherent Ising machines, and digital annealers presents new opportunities for hardware-accelerated hybrid optimization algorithms. Unfortunately, demonstrations of unquestionable performance gains leveraging novel hardware platforms have faced significant obstacles. One key challenge is understanding the algorithmic properties that distinguish such devices from established optimization approaches. Through the careful design of contrived optimization tasks, this work provides new insights into the computation proper…
Quantum annealing (QA) is a hardware-based heuristic optimization and sampling method applicable to discrete undirected graphical models. While similar to simulated annealing, QA relies on quantum, rather than thermal, effects to explore complex search spaces. For many classes of problems, QA is known to offer computational advantages over simulated annealing. Here we report on the ability of recent QA hardware to accelerate training of fully visible Boltzmann machines. We characterize the sampling distribution of QA hardware, and show that in many cases, the quantum distributions differ signi…
Quantum computing holds the promise of substantially speeding up computationally expensive tasks, such as solving optimization problems over a large number of elements. In high-energy collider physics, quantum-assisted algorithms might accelerate the clustering of particles into jets. In this study, we benchmark quantum annealing strategies for jet clustering based on optimizing a quantity called "thrust" in electron-positron collision events. We find that quantum annealing yields similar performance to exact classical approaches and classical heuristics, but only after tuning the annealing pa…
Quantum annealing is a promising technique which leverages quantum mechanics to solve hard optimization problems. Considerable progress has been made in the development of a physical quantum annealer, motivating the study of methods to enhance the efficiency of such a solver. In this work, we present a quantum annealing approach to measure similarity among molecular structures. Implementing real-world problems on a quantum annealer is challenging due to hardware limitations such as sparse connectivity, intrinsic control error, and limited precision. In order to overcome the limited connectivit…
Diabatic quantum annealing (DQA) is an alternative algorithm to adiabatic quantum annealing (AQA) that can be used to circumvent the exponential slowdown caused by small minima in the annealing energy spectrum. We present the locally suppressed transverse-field (LSTF) protocol, a heuristic method for making stoquastic optimization problems compatible with DQA. We show that, provided an optimization problem intrinsically has magnetic frustration due to inhomogeneous local fields, a target qubit in the problem can always be manipulated to create a double minimum in the energy gap between the gro…
Steiner Traveling Salesman Problem with Quantum Annealing
Department of Mechanical, Energy and Management Engineering, University of Calabria（机械、能源与管理工程系，卡塔尔大学）；TECNALIA, Basque Research and Technology Alliance (BRTA)（TECNALIA，巴斯克研究与技术联盟（BRTA））
Università degli Studi di Bologna（博洛尼亚大学）；Istituto di Fotonica e Nanotecnologie, Consiglio Nazionale delle Ricerche（国家研究委员会光子学与纳米技术研究所）；Dipartimento di Fisica, Universitá degli Studi di Milano Bicocca（米兰比可卡大学物理系）
Boltzmann Machines constitute a class of neural networks with applications to image reconstruction, pattern classification and unsupervised learning in general. Their most common variants, called Restricted Boltzmann Machines (RBMs) exhibit a good trade-off between computability on existing silicon-based hardware and generality of possible applications. Still, the diffusion of RBMs is quite limited, since their training process proves to be hard. The advent of commercial Adiabatic Quantum Computers (AQCs) raised the expectation that the implementations of RBMs on such quantum devices could inc…
We introduce the method of using an annealing genetic algorithm to the numerically complex problem of looking for quantum logic gates which simultaneously have highest fidelity and highest success probability. We first use the linear optical quantum nonlinear sign (NS) gate as an example to illustrate the efficiency of this method. We show that by appropriately choosing the annealing parameters, we can reach the theoretical maximum success probability (1/4 for NS) for each attempt. We then examine the controlled-z (CZ) gate as the first new problem to be solved. We show results that agree with…
We propose a prime factoring machine operated in a frame work of quantum annealing (QA). The idea is inverse operation of a quantum-mechanically reversible multiplier implemented with QA-based Boolean logic circuits. We designed the QA machine on an application-specific-annealing-computing architecture which efficiently increases available hardware budgets at the cost of restricted functionality. The circuits are to be implemented and fabricated by using superconducting integrated circuit technology. We propose a three-dimensional packaging scheme of a qubit-chip / interposer / package-substra…
Transformer-Based Neural Quantum Digital Twins for Many-Body Spectral Reconstruction and Adaptive Quantum-Annealing Schedule Design
Department of Mathematics, Faculty of Science, National University of Singapore（新加坡国立大学数学系）；Centre for Quantitative Finance, Faculty of Science, National University of Singapore（新加坡国立大学量化金融中心）；Risk Management Institute, National University of Singapore（新加坡国立大学风险管理研究所）
We study the effect of a thermal environment on the quantum annealing dynamics of a transverse-field Ising chain. The environment is modelled as a single Ohmic bath of quantum harmonic oscillators weakly interacting with the total transverse magnetization of the chain in a translationally invariant manner. We show that the density of defects generated at the end of the annealing process displays a minimum as a function of the annealing time, the so-called optimal working point, only in rather special regions of the bath temperature and coupling strength plane. We discuss the relevance of our r…
