arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2010.12147eess.SP
收藏

机器学习是否能够基于电信号检测和分类压阻骨水泥的失效?

Is Machine Learning Able to Detect and Classify Failure in Piezoresistive Bone Cement Based on Electrical Signals?

Hamid Ghaednia, Crystal E. Owens, Lily E. Keiderling, Kartik M. Varadarajan, A. John Hart, Joseph H. Schwab, Tyler T. Tallman

摘要:

在美国,全关节置换的翻修手术估计每年花费80亿美元,这对医疗保健系统来说是一个巨大的财政负担。固定失效,如植入物松动、磨损和将植入物粘合到骨上的聚(甲基丙烯酸甲酯)(PMMA)骨水泥的机械不稳定性,是植入物长期失效的主要原因。骨水泥失效的早期准确诊断对于开发新的治疗策略和降低误判翻修的高风险至关重要。不幸的是,流行的成像方式,特别是平片,难以检测植入失败的前兆,往往被错误地解释。我们之前的工作已经表明,PMMA骨水泥与低浓度的导电填料的修改,使其压阻,因此自感知,这样当结合电导率成像模态,如电阻抗断层扫描(EIT),它是可能的监测跨PMMA使用成本效益,生理良性,实时电气测量的负载转移。在这里,我们通过将机器学习技术与EIT相结合来扩展这些结果。我们调查不同的机器学习算法和主成分分析应用到这个问题,包括神经网络的电压读数的EIT幻影跟踪位置的样品,指定缺陷的位置,并分类缺陷类型。我们的结果表明,神经网络在解释EIT信号以进行位置跟踪、指定缺陷位置和缺陷分类方面的准确率分别超过91.9%、95.5%和98%。这些初步结果表明,智能材料、EIT和机器学习的结合可能是诊断关节置换失败起源和演变的有力工具。

英文摘要:

At an estimated cost of $8 billion annually in the United States, revision surgeries to total joint replacements represent a substantial financial burden to the health care system. Fixation failures, such as implant loosening, wear, and mechanical instability of the poly(methyl methacrylate) (PMMA) cement, which bonds the implant to the bone, are the main causes of long-term implant failure. Early and accurate diagnosis of cement failure is critical for developing novel therapeutic strategies and reducing the high risk of a misjudged revision. Unfortunately, prevailing imaging modalities, notably plain radiographs, struggle to detect the precursors of implant failure and are often interpreted incorrectly. Our prior work has shown that the modification of PMMA bone cement with low concentrations of conductive fillers makes it piezoresistive and therefore self-sensing such that when combined with a conductivity imaging modality, such as electrical impedance tomography (EIT), it is possible to monitor load transfer across the PMMA using cost-effective, physiologically benign, and real-time electrical measurements. Herein, we expand upon these results by integrating machine learning techniques with EIT. We survey different machine learning algorithms and principal component analysis for application to this problem, including neural networks on voltage readings of an EIT phantom for tracking position of a sample, specifying defect location, and classifying defect types. Our results show advantage of neural network with more than 91.9 %, 95.5 %, and 98 % accuracy in interpreting EIT signals for location tracking, specifying defect location, and defect classification respectively. These preliminary results show that the combination of smart materials, EIT, and machine learning may be a powerful tool for diagnosing the origin and evolution of failure in joint replacement.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑