周期性及稀释障碍物阵列中圆盘流动的方向性堵塞与相分离
Directional Clogging and Phase Separation for Disk Flow Through Periodic and Diluted Obstacle Arrays
AI总结:
本研究模拟圆盘流经方形障碍物阵列,发现随密度增加出现方向依赖的堵塞与相分离,堵塞可因角度改变解除,且对障碍物稀释具鲁棒性,但过度稀释会消除堵塞。
摘要:
我们模拟了当流动方向相对于阵列的对称方向改变时,圆盘集体流过方形障碍物阵列的过程。在较低的圆盘密度下,任何驱动方向都不会发生堵塞,但随着圆盘密度的增加,平均圆盘速度降低并产生驱动角度依赖性。对于某些驱动角度,当系统形成由高密度堵塞区域与空区域共存组成的异质堵塞状态时,流动减少或降至零。堵塞状态是脆弱的,可以通过改变驱动角度来解除堵塞。对于较大的障碍物尺寸,我们发现了一种均匀堵塞状态,它区别于集体堵塞机制。在堵塞相内,随着驱动力的增加,可能发生去钉扎转变,在去钉扎阈值以上出现强烈的间歇运动。堵塞对障碍物位点的随机移除或稀释具有鲁棒性,即使稀释度增加,圆盘也能形成跨越系统的堵塞簇。然而,如果稀释度过大,堵塞行为就会消失。
英文摘要:
We model collective disk flow though a square array of obstacles as the flow direction is changed relative to the symmetry directions of the array. At lower disk densities there is no clogging for any driving direction, but as the disk density increases, the average disk velocity decreases and develops a drive angle dependence. For certain driving angles, the flow is reduced or drops to zero when the system forms a heterogeneous clogged state consisting of high density clogged regions coexisting with empty regions. The clogged states are fragile and can be unclogged by changing the driving angle. For large obstacle sizes, we find a uniform clogged state that is distinct from the collective clogging regime. Within the clogged phases, depinning transitions can occur as a function of increasing driving force, with strongly intermittent motion appearing just above the depinning threshold. The clogging is robust against the random removal or dilution of the obstacle sites, and the disks are able to form system-spanning clogged clusters even under increasing dilution. If the dilution becomes too large, however, the clogging behavior is lost.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。