Long range wide area networks (LoRaWAN) technology provides a simple solution to enable low-cost services for low power internet-of-things (IoT) networks in various applications. The current evaluation of LoRaWAN networks relies on simulations or early testing, which are typically time consuming and prevent effective exploration of the design space. This paper proposes an analytical model to calculate the delay and energy consumed for reliable Uplink (UL) data delivery in Class A LoRaWAN. The analytical model is evaluated using a real network test-bed as well as simulation experiments based on the ns-3 LoRaWAN module. The resulting comparison confirms that the model accurately estimates the delay and energy consumed in the considered environment. The value of the model is demonstrated via its application to evaluate the impact of the number of end-devices and the maximum number of data frame retransmissions on delay and energy consumed for the confirmed UL data delivery in LoRaWAN networks. The model can be used to optimize different transmission parameters in future LoRaWAN networks.
Low power wide area networks (LPWANs), such as the ones based on the LoRaWAN protocol, are seen as enablers of large number of IoT applications and services. In this work, we assess the scalability of LoRaWAN by analyzing the frame success probability (FSP) of a LoRa frame while taking into account the capture effect and the number of parallel demodulation paths of the receiving gateway. We have based our model on the commonly used {SX1301 gateway chipset}, which is capable of demodulating {up to} eight frames simultaneously; however, the results of the model can be generalized to architecture…
Long Range Wide Area Networks (LoRaWAN) is an open medium access control (MAC) layer technology devised for the long range connectivity of massive number of low power network devices. This work gives an overview of the key aspects of LoRaWAN technology and presents results that we achieved via extensive evaluation of Class A LoRaWAN devices in different network settings using the state-of-the-art network simulator (NS-3). At first, we focus on a single device and its mobility. We further undertook evaluations in an extended network scenario with a changing number of devices and traffic intensi…
LoRaWAN promises to provide wide-area network access to low-cost devices that can operate for up to 10 years on a single 1000 mAh battery. This makes LoRaWAN particularly suited to data collection applications (e.g. monitoring applications), where device lifetime is a key performance metric. However, when supporting a large number of devices, LoRaWAN suffers from a scalability issue due to the high collision probability of its Aloha-based MAC layer. The performance worsens further when using acknowledged transmissions due to the duty cycle restriction at the gateway. For this, we propose FREE,…
Low-power wide-area network technologies such as LoRaWAN are promising for collecting low-rate monitoring data from geographically distributed sensors, in which timestamping the sensor data is a critical system function. This paper considers a synchronization-free approach to timestamping LoRaWAN uplink data based on signal arrival time at the gateway, which well matches LoRaWAN's one-hop star topology and releases bandwidth from transmitting timestamps and synchronizing end devices' clocks at all times. However, we show that this approach is susceptible to a {\em frame delay attack} consistin…
LoRaWAN is a promising low power long range wireless communications technology for the Internet of Things. An important feature of LoRaWAN gateways is related to so-called capture effect: under some conditions the gateway may correctly receive a frame even if it overlaps with other ones. In this paper, we develop a pioneering mathematical model of a LoRaWAN network which allows finding network capacity and transmission reliability taking into account the capture effect.
LoRaWAN is one of the leading Low Power Wide Area Network (LPWAN) architectures. It was originally designed for systems consisting of static sensor or Internet of Things (IoT) devices and static gateways. It was recently updated to introduce new features such as nano-second timestamps which open up applications to enable LoRaWAN to be adopted for mobile device tracking and localisation. In such mobile scenarios, devices could temporarily lose communication with the gateways because of interference from obstacles or deep fading, causing throughput reduction and delays in data transmission. To o…
Over the last few years we have witnessed an exponential growth in the adoption of LoRaWAN as LPWAN technology for IoT. While LoRaWAN offers many advantages, one of its limitations is the paltry data rate. Most IoT applications don't require a high throughput but there are some that would benefit from a higher data rate. In this paper, we present TurboLoRa, a system that combines the strengths of LoRaWAN while providing a higher data rate by synchronizing the transmission of multiple LoRaWAN devices. Our proposal allows to combine cheap devices making it a frugal solution to this kind of probl…
In recent years, the use of Low Power Wide Area Network (LPWAN) is increasing for the Internet of Things (IoT) applications. In order to demonstrate the application of LPWAN technologies for a realistic smart metering scenario, we set-up and implement a widely used LPWAN protocol which is called LoRaWAN. In this study, the LoRaWAN is implemented by using Multitech devices (end-node and gateway) and the performance of the network is evaluated for different physical (e.g. location, distance etc.) and link parameters (e.g. data rate, transmission power etc.), under the European regulations. To ev…
The need for low power, long range and low cost connectivity to meet the requirements of IoT applications has led to the emergence of Low Power Wide Area (LPWA) networking technologies. The promise of these technologies to wirelessly connect massive numbers of geographically dispersed devices at a low cost continues to attract a great deal of attention in the academic and commercial communities. Several rollouts are already underway even though the performance of these technologies is yet to be fully understood. In light of these developments, tools to carry out `what-if analyses' and pre-depl…
In this paper, we present results of a study of the data rate fairness among nodes within a LoRaWAN cell. Since LoRa/LoRaWAN supports various data rates, we firstly derive the fairest ratios of deploying each data rate within a cell for a fair collision probability. LoRa/LoRaWAN, like other frequency modulation based radio interfaces, exhibits the \textit{capture effect} in which only the stronger signal of colliding signals will be extracted. This leads to unfairness, where far nodes or nodes experiencing higher attenuation are less likely to see their packets received correctly. Therefore, w…
LoRaWAN exhibits several characteristics that can lead to an unfair distribution of the Data Extracted Rate (DER) among nodes. Firstly, the capture effect leads to a strong signal suppressing a weaker signal at the gateway and secondly, the spreading codes used are not perfectly orthogonal, causing packet loss if an interfering signal is strong enough. In these conditions, nodes experiencing higher attenuation are less likely to see their packets received correctly. We develop FADR, a Fair Adaptive Data Rate algorithm for LoRaWAN that exploits the different Spreading Factors (SFs) and Transmis…
LoRaWAN has emerged as an appealing technology to connect IoT devices but it functions without explicit coordination among transmitters, which can lead to many packet collisions as the network scales. State-of-the-art work proposes various approaches to deal with these collisions, but most functions only in high signal-to-interference ratio (SIR) conditions and thus does not scale to many scenarios where weak receptions are easily buried by stronger receptions from nearby transmitters. In this paper, we take a fresh look at LoRa's physical layer, revealing that its underlying linear chirp modu…
LoRa (Long-Range) is an LPWAN (low-power wide-area network) protocol that is part of the IoT family that focusses on long-range communication of up to 14km, albeit with delay-inherent transmissions. Three IoT-based time synchronisation methodologies are analysed, and their efficacy measured through a systematic critical literature review. These include a GNSS-based method, an off-the-shelf GPS hardware resampling method, and the LongShoT method, within the context of vehicular ad-hoc networks (VANET), wireless sensor networks (WSN), and long-range wide area network (LoRaWAN) respectively. Alth…
The Internet of Things (IoT) enables a wide variety of applications where large sensor networks are deployed in remote areas without power grid access. Thus, the sensor nodes often run on batteries, whose replacement and disposal represent important economical and environmental costs. To realize more sustainable IoT solutions, it is therefore desirable to adopt battery-less energy-neutral devices that can harvest energy from renewable sources and store it in super-capacitors, whose environmental impact is much lower than that of batteries. To achieve the energetic self-sustainability of such n…
Low-Power Wide Area Networks (LPWANs) have arisen as a promising communication technology for supporting Internet of Things (IoT) services due to their low power operation, wide coverage range, low cost and scalability. However, most LPWAN solutions like SIGFOX or LoRaWAN rely on star topology networks, where stations (STAs) transmit directly to the gateway (GW), which often leads to rapid battery depletion in STAs located far from it. In this work, we analyze the impact on LPWANs energy consumption of multi-hop communication in the uplink, allowing STAs to transmit data packets in lower power…
Appearing on the stage quite recently, the Low Power Wide Area Networks (LPWANs) are currently getting much of attention. In the current paper we study the susceptibility of one LPWAN technology, namely LoRaWAN, to the inter-network interferences. By means of excessive empirical measurements employing the certified commercial transceivers, we characterize the effect of modulation coding schemes (known for LoRaWAN as data rates (DRs)) of a transmitter and an interferer on probability of successful packet delivery while operating in EU 868 MHz band. We show that in reality the transmissions with…
Low-power wide-area network technologies such as LoRaWAN are promising for collecting low-rate monitoring data from geographically distributed sensors, in which timestamping the sensor data is a critical system function. This paper considers a synchronization-free approach to timestamping LoRaWAN uplink data based on signal arrival time at the gateway, which well matches LoRaWAN's one-hop star topology and releases bandwidth from transmitting timestamps and synchronizing end devices' clocks at all times. However, we show that this approach is susceptible to a {\em frame delay attack} consistin…
This survey paper provides a detailed explanation of Long Term Evolution cellular network packet scheduling algorithms in both downlink and uplink directions. It starts by explaining the difference between Orthogonal Frequency Division Multiple Access that is used in downlink transmission, and Single Carrier Frequency Division Multiple Access is used in uplink. Then, it explains the difference between the LTE scheduling process in the donwlink and uplink through explaining the interaction between users and the scheduler. Then, it explains the most commonly used downlink and uplink scheduling a…
Public safety networks avail to disseminate information during emergency situations through its dedicated servers. Public safety networks accommodate public safety communication (PSC) applications to track the location of its utilizers and enable to sustain transmissions even in the crucial scenarios. Despite that, if the traditional setups responsible for PSCs are unavailable, it becomes prodigiously arduous to handle any of the safety applications, which may cause havoc in the society. Dependence on a secondary network may assist to solve such an issue. But, the secondary networks should be …
CDMA is a multiple access method in which the user's uses spread spectrum techniques and occupy the entire spectrum whenever they transmit. In wireless communication signal-to-noise ratio (SNR) is the very important parameter that influences the system performance. Any mode of mobile transmission is not free from channel impairment such as noise, interference and fading. This channel impairment caused signal distortion and degradation in SNR.Also there are differences between uplink (forward channel) and downlink (reverse channel).Along with these differences, both the links use different code…
Online Learning Based Efficient Resource Allocation for LoRaWAN Network
School of Information and Communication Engineering, University of Electronic Science and Technology of China（电子科技大学信息与通信工程学院）；Research Institute of Intelligent Networks, Zhejiang Lab（浙江实验室智能网络研究院）
LoRaWAN has garnered tremendous attention owing to the low power consumption of end nodes, long range, high resistance to multipath, low cost, and use of license-free sub-GHz bands. Consequently, LoRaWAN is gradually replacing Wi-Fi and Bluetooth in sundry IoT applications including utility metering, smart cities, and localization. Localization, in particular, has already witnessed a surge of alternatives to Global Navigation Satellite System (GNSS), based on Wi-Fi, Bluetooth, Ultra Wide Band, 5G, etc. in indoor and low power domains due to the poor indoor coverage and high power consumption o…
Long range radio communication is preferred in many IoT deployments as it avoids the complexity of multi-hop wireless networks. LoRa is a popular, energy-efficient wireless modulation but its networking substrate LoRaWAN introduces severe limitations to its users. In this paper, we present and thoroughly analyze DSME-LoRa, a system design of LoRa with IEEE 802.15.4 DSME as a MAC layer. DSME-LoRa offers the advantage of seamless client-to-client communication beyond the pure gateway-centric transmission of LoRaWAN. We evaluate its feasibility via a full-stack implementation on the popular RIOT …
Energy-aware system design is an important optimization task for static and mobile Internet of Things (IoT)-based sensor nodes, especially for highly resource-constrained vehicles such as mobile robotic systems. For 4G/5G-based cellular communication systems, the effective transmission power of uplink data transmissions is of crucial importance for the overall system power consumption. Unfortunately, this information is usually hidden within off-the-shelf modems and mobile handsets and can therefore not be exploited for enabling green communication. Moreover, the dynamic transmission power con…
LoRaWAN deployments follow an ad-hoc deployment model that has organically led to overlapping communication networks, sharing the wireless spectrum, and completely unaware of each other. LoRaWAN uses ALOHA-style communication where it is almost impossible to schedule transmission between networks belonging to different owners properly. The inability to schedule overlapping networks will cause inter-network interference, which will increase node-to-gateway message losses and gateway-to-node acknowledgement failures. This problem is likely to get worse as the number of LoRaWAN networks increase.…
LoRa is a popular wireless technology that enables low-throughput (bytes) long-range communication (km) at low energy consumption (mW). Its transmission, though, is on one side prone to interference during long on-air times, and on the other side subject to duty cycle restrictions. LoRaWAN defines a MAC and a vertical stack on top of LoRa. LoRaWAN circumvents the above limitations by imposing a centralized network architecture, which heavily reduces downlink capacity and prevents peer-to-peer communication. This makes it unusable for many deployments. The Deterministic and Synchronous Multicha…
Non-Orthogonal Multiple Access (NOMA) is a promising technology for future Wi-Fi. In uplink NOMA, stations with different channel conditions transmit simultaneously at the same frequency by splitting the signal by power level. Since Wi-Fi uses random access, the implementation of uplink NOMA in Wi- Fi faces many challenges. The paper presents a data transmission mechanism in Wi-Fi networks that enables synchronous uplink NOMA, where multiple stations start data transmission to the access point simultaneously. The developed mechanism can work with the legacy Enhanced Distributed Channel Access …
This letter studies uplink transmission in large-scale cellular networks with a Type-II hybrid automatic repeat request (HARQ) retransmission scheme, under which an unsuccessful transmission (if occurs) is combined with the corresponding retransmission through maximum-ratio combining (MRC) for decoding. Based on stochastic geometry analysis, the uplink coverage probabilities are characterized under a generalized power control scheme in the scenarios with quasi-static interference (QSI) and fast-varying interference (FVI), where the same or different interfering users are present during the tra…
The introduction of Narrowband Internet of Things (NB-IoT) as a cellular IoT technology aims to support massive Machine-Type Communications applications. These applications are characterized by massive connections from a large number of low-complexity and low-power devices. One of the goals of NB-IoT is to improve coverage extension beyond existing cellular technologies. In order to do that, NB-IoT introduces transmission repetitions and different bandwidth allocation configurations in uplink. These new transmission approaches yield many transmission options in uplink. In this paper, we propos…
In cellular networks user equipment (UE) need to be tracked so that they can be reached by incoming data and to keep context information such as encryption keys available for UE originated transmission. Typically UEs measure reference signal transmissions that are broadcasted by the network, and report to the network based on some criterion that allows the network to know the UE location with sufficient accuracy. An alternative approach is to let the UEs send out reference signals that the network can detect to track the UE location. This reduces the need for the UEs to measure and report, whi…
In this paper, we study the joint power control and scheduling in uplink massive multiple-input multiple-output (MIMO) systems with random data arrivals. The data is generated at each user according to an individual stochastic process. Using Lyapunov optimization techniques, we develop a dynamic scheduling algorithm (DSA), which decides at each time slot the amount of data to admit to the transmission queues and the transmission rates over the wireless channel. The proposed algorithm achieves nearly optimal performance on the long-term user throughput under various fairness policies. Simulatio…
Separation of control and data planes (SCDP) is a desirable paradigm for low-power multi-hop wireless networks requiring high network performance and manageability. Existing SCDP networks generally adopt an in-band control plane scheme in that the control-plane messages are delivered by their data-plane networks. The physical coupling of the two planes may lead to undesirable consequences. To advance the network architecture design, we propose to leverage on the long-range communication capability of the increasingly available low-power wide-area network (LPWAN) radios to form one-hop out-of-b…
We investigate methods for network association that improve the reliability of uplink transmissions in dense wireless heterogeneous networks. The stochastic geometry analysis shows that the double association, in which an uplink transmission is transmitted to a macro Base Station (BS) and small BS, significantly improves the probability of successful transmission.
Next-generation 802.11ax WLANs will make extensive use of multi-user communications in both downlink (DL) and uplink (UL) directions to achieve high and efficient spectrum utilization in scenarios with many user stations per access point. It will become possible with the support of multi-user (MU) multiple input, multiple output (MIMO) and orthogonal frequency division multiple access (OFDMA) transmissions. In this paper, we first overview the novel characteristics introduced by IEEE 802.11ax to implement AP-initiated OFDMA and MU-MIMO transmissions in both downlink and uplink directions. Name…
Performance improvement has been among the foci of all previous amendments of IEEE 802.11 protocol. In addition, the draft high efficiency (HE) amendment IEEE 802.11ax, proposed by TGax, aims at increasing network performance. One of the main obstacles to improving spectral and power efficiency is the presence of hidden terminals which degrade throughput, in particular in uplink transmission. IEEE 802.11ax does provide mechanisms such as trigger based uplink transmission that mitigate this degradation to some extent, but are incapable of eliminating it, esp. at high arrival rates. To combat th…
Simultaneous co-channel transmission and reception, denoted as in-band full duplex (FD) communication, has been promoted as an attractive solution to improve the spectral efficiency of cellular networks. However, in addition to the self-interference problem, cross-mode interference (i.e., between uplink and downlink) imposes a major obstacle for the deployment of FD communication in cellular networks. More specifically, the downlink to uplink interference represents the performance bottleneck for FD operation due to the uplink limited transmission power and venerable operation when compared to…
Simultaneous reuse of spectral resources by uplink and downlink, denoted as in-band full duplex (FD) communication, is promoted to double the spectral efficiency when compared to its half-duplex (HD) counterpart. Interference management, however, remains challenging in FD cellular networks, especially when high disparity between uplink and downlink transmission powers exists. The uplink performance can be particularly deteriorated when operating on channels that are simultaneously occupied with downlink transmission. This paper considers a cellular wireless system with partial spectrum overlap…
Multiple-input multiple-output non-orthogonal multiple access (MIMO-NOMA) cellular network is promising for supporting massive connectivity. This paper exploits low-latency machine learning in the MIMO-NOMA uplink transmission environment, where a substantial amount of data must be uploaded from multiple data sources to a one-hop away edge server for machine learning. A delay-aware edge learning framework with the collaboration of data sources, the edge server, and the base station, referred to as DACEL, is proposed. Based on the delay analysis of DACEL, a NOMA channel allocation algorithm is …
Low-Power Wide-Area Networks (LPWANs) emerged to cover the needs of Internet of Things (IoT)-devices for operational longevity and long operating range. Among LPWANs, Long Range (LoRa) WAN has been the most promising; an upcoming IoT protocol, already adopted by big mobile operators like KPN and TTN. With LoRaWANs, IoT-devices transmit data to their corresponding gateways over many kilometers in a single hop and with 1% duty-cycle. However, in a LoRa network, any device claims the channel for data-transmission without performing channel-sensing or synchronization with other devices. This incre…
Small cell networks are evolving as an economically viable solution to ameliorate the capacity and coverage of state-of-the-art wireless cellular systems. Nonetheless, the dense and unplanned deployment of the small cells (e.g., femtocells, picocells) with restricted user access significantly increases the impact of interference on the overall network performance. To this end, this paper presents a novel framework to derive the statistics of the interference considering dedicated and shared spectrum access for uplink transmissions in two-tier small cell networks such as the macrocell-femtocell…
We propose two novel schemes to level up the sum--rate for a two-tier network with femtocell where the backhaul uplink and downlink connecting the Base Stations have limited capacity. The backhaul links are exploited to transport the information in order to improve the decoding of the macrocell and femtocell messages. In the first scheme, Quantize-and-Forward, the Femto Base Station (FBS) quantizes what it receives and forwards it to the Macro Base Station (MBS). Two quantization methods are considered: Elementary Quantization and Wyner-Ziv Quantization. In the second scheme, called Decode-and…
Using stochastic geometry, we develop a tractable uplink modeling paradigm for outage probability and spectral efficiency in both single and multi-tier cellular wireless networks. The analysis accounts for per user equipment (UE) power control as well as the maximum power limitations for UEs. More specifically, for interference mitigation and robust uplink communication, each UE is required to control its transmit power such that the average received signal power at its serving base station (BS) is equal to a certain threshold $ρ_o$. Due to the limited transmit power, the UEs employ a truncate…
