Cellulose nanocrystals (CNC) can be considered as model colloidal rods and have practical applications in the formation of soft materials with tailored anisotropy. Here, we employ two contrasting microfluidic devices to quantitatively elucidate the role of shearing and extensional flows on the alignment of a dilute CNC dispersion. Characterization of the flow field by micro-particle image velocimetry is coupled to flow-induced birefringence analysis to quantify the deformation rate--alignment relationship. The deformation rate required for CNC alignment is 4$\times$ smaller in extension than in shear. Alignment in extension is independent of the deformation rate magnitude, but is either 0$^\circ$ or 90$^\circ$ to the flow, depending on its sign. In shear flow the colloidal rods orientate progressively towards 0$^\circ$ as the deformation rate magnitude increases. Our results decouple the effects of shearing and extensional kinematics at aligning colloidal rods, establishing coherent guidelines for the manufacture of structured soft materials.
Inclusions dissolved in an anisotropic quasi-2D membrane acquire new types of interactions that can drive assembly of complex structures and patterns. We study colloidal membranes composed of a binary mixture of long and short rods, such that the length ratio of the long to short rods is approximately two. At very low volume fractions, short rods dissolve in the membrane of long rods by strongly anchoring to the membrane polymer interface. At higher fractions, the dissolved short rods phase separate from the background membrane, creating a composite structure comprised of bilayer droplets enri…
Complex fluids containing low concentrations of slender colloidal rods can display a high viscosity, while little flow is needed to thin the fluid. This feature makes slender rods essential constituents in industrial applications and biology. Though this behaviour strongly depends on the rod-length, so far no direct relation could be identified. We employ a library of filamentous viruses to study the effect of rod size and flexibility on the zero-shear viscosity and shear-thinning behaviour. Rheology and small angle neutron scattering data are compared to a revised version of the standard theo…
Shear history plays an important role in determining the linear and nonlinear rheological response of colloidal gels and can be used for tuning their structure and flow properties. Increasing colloidal particle aspect ratio lowers the critical volume fraction for gelation due to an increase of the particle excluded volume. Using a combination of rheology and confocal microscopy we investigate the effect of steady and oscillatory pre-shear history on the structure and rheology of colloidal gels formed by silica spheres and rods of length L and diameter D (L/D = 10) dispersed in 11 M CsCl soluti…
We report on the identification and quantitative characterization of elementary edge and screw dislocations in a colloidal smectic phase of tip-labeled rods. Thanks to the micrometer layer spacing, direct visualization of dislocations has been performed at the \textit{smectic periodicity scale} by optical fluorescence microscopy. As a result, the displacement field around an edge dislocation has been experimentally established and compared with the profile predicted by elastic theory. Elementary screw dislocations have been also evidenced, for which the core size as well as the \textit{in situ…
Understanding the hydrodynamic alignment of colloidal rods in polymer solutions is pivotal for manufacturing structurally ordered materials. How polymer crowding influences the flow-induced alignment of suspended colloidal rods remains unclear when rods and polymers share similar length-scales. We tackle this problem by analyzing the alignment of colloidal rods suspended in crowded polymer solutions, and comparing against the case where crowding is provided by additional colloidal rods in a pure solvent. We find that the polymer dynamics govern the onset of shear-induced alignment of colloidal…
We study the layer-to-layer diffusion in smectic-A liquid crystals of colloidal hard rods with different length-to-diameter ratios using computer simulations. The layered arrangement of the smectic phase yields a hopping-type diffusion due to the presence of permanent barriers and transient cages. Remarkably, we detect stringlike clusters composed of inter-layer rods moving cooperatively along the nematic director. Furthermore, we find that the structural relaxation in equilibrium smectic phases shows interesting similarities with that of out-of-equilibrium supercooled liquids, although there …
Self-diffusion in isotropic and liquid crystalline phases of fd virus colloidal rods: a combined single particle tracking and differential dynamic microscopy study
Understanding the relaxation dynamics of colloidal suspensions is crucial to identify the elements that influence the mobility of their constituents, assess their macroscopic response across the relevant time and length scales, and thus disclose the fundamentals underpinning their exploitation in formulation engineering. In this work, we specifically assess the impact of long-ranged ordering on the relaxation dynamics of suspensions of soft-repulsive rod-like particles, which are able to self-organise into nematic and smectic liquid-crystalline phases. By performing Dynamic Monte Carlo simulat…
We assess the possibility of shear banding of semidilute rod-like colloidal suspensions under steady shear ow very close to the isotropic-nematic spinodal, using a combination of rheology, small angle neutron scattering, and laser Doppler velocimetry. Model systems are employed which allow for a length and stiffness variation of the particles. The rheological signature reveals that these systems are strongly shear thinning at moderate shear rates. It is shown that the longest and most flexible rods undergo the strongest shear thinning and have the greatest potential to form shear bands. Althou…
Using a combination of theory and experiments we study the interface between two immiscible domains in a colloidal membrane composed of rigid rods of different lengths. Geometric considerations of rigid rod packing imply that a domain of sufficiently short rods in a background membrane of long rods is more susceptible to twist than the inverse structure, a long-rod domain in a short-rod membrane background. The tilt at the inter-domain edge forces splay, which in turn manifests as a spontaneous edge curvature whose energetics are controlled by the length asymmetry of constituent rods. A thermo…
Suspensions of non-Brownian rods: droplet pinch-off, onset of heterogeneity and effective extensional viscosity
PMMH, CNRS, ESPCI Paris, Sorbonne Université, Université Paris-Cité（PMHH，法国国家科学研究中心，巴黎高等物理化工学院，索邦大学，巴黎 Cité 大学）；Department of Mechanical Engineering, University of California, Santa Barbara（加州大学圣塔芭芭拉分校机械工程系）；Institute of Physics, University of Amsterdam（阿姆斯特丹大学物理研究所）；Department of Mechanical Engineering, University of Maryland（马里兰大学机械工程系）；Department of Chemical and Biomolecular Engineering, University of Maryland（马里兰大学化学与生物分子工程系）
In order to investigate the coupling between the degrees of alignment of elongated particles in binary nematic dispersions, surfactant stabilized single-wall carbon nanotubes (CNTs) have been added to nematic suspensions of colloidal rodlike viruses in aqueous solution.We have independently measured the orientational order parameter of both components of the guest-host system by means of polarized Raman spectroscopy and by optical birefringence, respectively. Our system allows us therefore to probe the regime where the guest particles (CNTs) are shorter and thinner than the fd virus host parti…
We study suspensions of semi-flexible colloidal rods and biopolymers using an Onsager-type second-virial functional for a segmented-chain model. For suspensions of thin and thick fd virus particles we calculate phase diagrams in quantitative agreement with experimental observations, and we find their effective state-point dependent shape to be much shorter and thicker than the actual shape. We also calculate the stretching of worm-like micelles in a host fd virus solution, again finding agreement with experiments. For both systems, our results show that the fd virus stiffness can play a key ro…
We study theoretically the effect of a gravitational field on the equilibrium behaviour of a colloidal suspension of rods with different length-to-width aspect ratios. The bulk phases of the system are described with analytical equations of state. The gravitational field is then incorporated via sedimentation path theory, which assumes a local equilibrium condition at each altitude of the sample. The bulk phenomenology is significantly enriched by the presence of the gravitational field. In a suspension of elongated rods with five stable phases in bulk, the gravitational field stabilizes up to…
Detailed control over the motion of colloidal particles is relevant in many applications in colloidal science such as lab-on-a-chip devices. Here, we use an external magnetic field to assemble paramagnetic colloidal spheres into colloidal rods of several lengths. The rods reside above a square magnetic pattern and are transported via modulation of the direction of the external magnetic field. The rods behave like bipeds walking above the pattern. Depending on their length, the bipeds perform topologically distinct classes of protected walks above the pattern. We demonstrate that it is possible…
We formulate a density functional theory that describes the phase behavior of hard rods and depleting polymers, as realized in recent experiments on suspensions of \emph{fd} virus and non-adsorbing polymer. The theory predicts the relative stability of nematic droplets, stacked smectic columns, and a recently discovered phase of isolated monolayers of rods, or colloidal membranes. We find that a minimum rod aspect ratio is required for stability of colloidal membranes and that collective protrusion undulations are the dominant effect that stabilizes this phase. The theoretical predictions are …
In the presence of a non-adsorbing polymer, monodisperse rod-like colloids assemble into one-rod-length thick liquid-like monolayers, called colloidal membranes. The density of the rods within a colloidal membrane is determined by a balance between the osmotic pressure exerted by the enveloping polymer suspension and the repulsion between the colloidal rods. We developed a microfluidic device for continuously observing an isolated membrane while dynamically controlling the osmotic pressure of the polymer suspension. Using this technology we measured the membrane rod density over a range of osm…
In many natural and artificial devices diffusive transport takes place in confined geometries with corrugated boundaries. Such boundaries cause both entropic and hydrodynamic effects, which have been studied only for the case of spherical particles. Here we experimentally investigate diffusion of particles of elongated shape confined into a corrugated quasi-two-dimensional channel. Elongated shape causes complex excluded-volume interactions between particle and channel walls which reduce the accessible configuration space and lead to novel entropic free energy effects. The extra rotational deg…
Using computer simulations, we explore how thermal noise-induced randomness in a self-assembled photonic crystal affects its photonic band gaps (PBGs). We consider a two-dimensional photonic crystal comprised of a self-assembled array of parallel dielectric hard rods of infinite length with circular or square cross section. We find the PBGs can exist over a large range of intermediate packing densities. Counterintuitively, the largest band gap does not always appear at the packing density where the crystal is most ordered, despite the randomness inherent in any self-assembled structure. For ro…
There is now convincing evidence that inter-particle frictional contacts are essential for observing shear-thickening in concentrated suspensions of compact particles. While this has inspired many strategies to tailor the rheology in these systems, in the more general case, viz-a-viz suspensions of anisotropic particles, the mechanism of shear-thickening remains unclear. Here through simultaneous measurements of the bulk viscosity and the first Normal stress difference, we show that strong shear thickening in suspensions of colloidal rods is accompanied by large positive normal stresses, indic…
In modern transformation optics, one explores metamaterials with properties that vary from point to point in space and time, suitable for applications in devices such as an "optical invisibility cloak" and an "optical black hole". We propose an approach to construct spatially varying and switchable metamaterials that are based on colloidal dispersions of metal nano-rods (NRs) in dielectric fluids, in which dielectrophoretic forces, originating in the electric field gradients, create spatially varying configurations of aligned NRs. The electric field controls orientation and concentration of NR…
We construct a phenomenological Landau-de Gennes theory for hard colloidal rods by performing an order parameter expansion of the chemical-potential dependent grand potential. By fitting the coefficients to known results of Onsager theory, we are not only able to describe the isotropic-nematic phase transition as function of density, including the well-known density jump, but also the isotropic-nematic planar interface. The resulting theory is applied in calculations of the isotropic core size in a radial hedgehog defect, the density dependence of linear defects of hard rods in square confinem…
Spherically-symmetric atom-centered descriptors of atomic environments have been widely used for constructing potential or free energy surfaces of atomistic and colloidal systems and to characterize local structures using machine learning techniques. However, when particle shapes are non-spherical, as in the case of rods and ellipsoids, standard spherically-symmetric structure functions alone produce imprecise descriptions of local environments. In order to account for the effects of orientation, we introduce two- and three-body orientation-dependent particle-centered descriptors for systems c…
In the presence of a non-adsorbing polymer, monodisperse rod-like particles assemble into colloidal membranes, which are one rod-length thick liquid-like monolayers of aligned rods. Unlike 3D edgeless bilayer vesicles, colloidal monolayer membranes form open structures with an exposed edge, thus presenting an opportunity to study physics of thin elastic sheets. Membranes assembled from single-component chiral rods form flat disks with uniform edge twist. In comparison, membranes comprised of mixture of rods with opposite chiralities can have the edge twist of either handedness. In this limit d…
We analyse a binary mixture of colloidal parallel hard cylindrical particles with identical diameters but dissimilar lengths $L_1$ and $L_2$, with $s=L_2/L_1=3$, confined by two parallel hard walls in a planar slit-pore geometry, using a fundamental--measure density functional theory. This model presents nematic (N) and two types of smectic (S) phases, with first- and second-order N-S bulk transitions and S-S demixing, and surface behaviour at a single hard wall which includes complete wetting by the S phase mediated (or not) by an infinite number of surface-induced layering (SIL) transitions.…
We construct phase diagrams for charged rodlike colloids within the second-virial approximation as a function of rod concentration, salt concentration, and colloidal charge. Besides the expected isotropic-nematic transition, we also find parameter regimes with a coexistence between a nematic and a second, more highly aligned nematic phase including an isotropic-nematic-nematic triple point and a nematic-nematic critical point, which can all be explained in terms of the twisting effect. We compute the Frank elastic constants to see if the twist elastic constant can become negative, which would …
Colloidal rods immersed in a thermotropic liquid-crystalline solvent are at the basis of so-called hybrid liquid crystals which are characterized by tunable nematic fluidity with symmetries ranging from conventional uniaxial nematic or anti-nematic to orthorhombic [Mundoor et al., Science 360, 768 (2018)]. We provide a theoretical analysis of the elastic moduli of such systems by considering interactions between the individual rods with the embedding solvent through surface-anchoring forces, as well as steric and electrostatic interactions between the rods themselves. For uniaxial systems the …
The vertical drying of a colloidal film containing rod-like particles was studied by means of kinetic Monte Carlo (MC) simulation. The problem was approached using a two-dimensional square lattice and the rods were represented as linear $k$-mers (i.e., particles occupying $k$ adjacent sites). The initial state before drying was produced using a model of random sequential adsorption (RSA) with isotropic orientations of the $k$-mers (orientation of the $k$-mers along horizontal $x$ and vertical $y$ directions are equiprobable). In the RSA model, overlapping of the $k$-mers is forbidden. During t…
The yet virtually unexplored class of soft colloidal rods with small aspect ratio is investigated and shown to exhibit a very rich phase and dynamic behavior, spanning from liquid to nearly melt state. Instead of nematic order, these short and soft nanocylinders alter their organization with increasing concentration from isotropic liquid with random orientation to one with preferred local orientation and eventually a multi-domain arrangement with local orientational order. The latter gives rise to a kinetically suppressed state akin to structural glass with detectable terminal relaxation, whic…
The Granular Integration Through Transients (GITT) formalism gives a theoretical description of the rheology of moderately dense granular flows and suspensions. In this work, we extend the GITT equations beyond the case of simple shear flows studied before. Applying this to the particular example of extensional flows, we show that the predicted behavior is somewhat different from that of the more frequently studied simple shear case, as illustrated by the possibility of non monotonous evolution of the effective friction coefficient $μ$ with the inertial number $\mathcal{I}$. By the reduction o…
The complete orientational ordering tensor of quasi-ideal colloidal rods is obtained as a function of shear rate by performing rheo-SANS (rheology with small angle neutron scattering) measurements on isotropic fd-virus suspensions in the two relevant scattering planes, the flow-gradient (1-2) and the flow-vorticity (1-3) plane. Microscopic ordering can be identified as the origin of the observed shear thinning. A qualitative description of the rheological response by Smoluchowski, as well as Doi--Edwards--Kuzuu theory is possible, as we obtain a master curve for different concentrations, scali…
Coalescence event in pendant and sessile drop is distinguished by the formation and evolution of the liquid bridge created upon singular contact. The bridge radius, $R$, is known to evolve as $R\sim t^b$, with power-law exponent, $b$, signifying the dominant governing forces. In this work, we experimentally explore the phenomenon in sub-classes of complex fluids namely, colloidal and non-colloidal suspensions that have particle hydrodynamic interactions as origin of viscoelasticity. Our observations suggest that such fluids have flow dependent thinning response with finite elasticity in shear …
We study the orientational dynamics of heavy silica microrods flowing through a microfluidic channel. Comparing experiments and Brownian dynamics simulations we identify different particle orbits, in particular in-plane tumbling behavior, which cannot be explained by classical Jeffery theory, and we relate this behavior to the rotational diffusion of the rods. By constructing the full, three-dimensional, orientation distribution, we describe the rod trajectories and quantify the persistence of Jeffery orbits using temporal correlation functions of the Jeffery constant. We find that our colloid…
Filamentous bacteriophages such as fd-like viruses are monodisperse rod-like colloids that have well defined properties: diameter, length, rigidity, charge and chirality. Engineering those viruses leads to a library of colloidal rods which can be used as building blocks for reconfigurable and hierarchical self-assembly. Their condensation in aqueous solution þ{with additive polymers which act as depletants to induce} attraction between the rods leads to a myriad of fluid-like micronic structures ranging from isotropic/nematic droplets, colloid membranes, achiral membrane seeds, twisted ribbons…
Spinodal demixing of systems into two phases having very different viscosities leads to viscoelastic networks, i.e. gels. Here we consider demixing in a colloidal system where one phase is a nematic liquid crystal with a strongly anisotropic viscosity. We combine real space analysis of a sepiolite clay system with molecular dynamics computer simulation. We find a long-lived network with many of the characteristics of a colloidal gel. Remarkably the anisotropic viscosity means that flow is possible within the nematic network, but only along the network, which thus preserves its structure, leadi…
We propose a microscopic picture for understanding the nonlinear rheology of supercooled liquids with soft-repulsive potentials. Based on Brownian dynamics simulations of supercooled charge-stabilized colloidal suspensions, our analysis shows that the shear thinning of viscosity (eta) at large enough shear rates (sr), expressed as eta~sr^(-lambda), originates from the evolution of the localized elastic region (LER). An LER is a transient region composed of the first several coordination shells of a reference particle. In response to the external shear, particles within LER undergo nearly affin…
