arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2008.11405cond-mat.mtrl-sci
收藏

理解Ca偏析对纳米结构铝的热稳定性、电阻率和机械强度的作用

Understanding the role of Ca segregation on thermal stability, electrical resistivity and mechanical strength of nanostructured aluminum

Xavier Sauvage, Fabien Cuvilly, Alan Russell, Kaveh Edalati

摘要:

实现低重量铝合金的高机械强度和高导电性的组合需要充分理解纳米尺度特征和物理性质之间的关系。通过晶粒尺寸减小的晶界强化提供了一些有趣的可能性,但受到热稳定性问题的限制。稳定的纳米级颗粒或晶界偏析的齐纳钉扎是众所周知的稳定晶界的策略。在这项研究中,铝钙系统已被选定调查的方式偏析影响机械强度和电阻率的组合。为此,通过高压扭转使Al-Ca复合材料严重变形,以实现平均晶粒尺寸仅为25 nm的纳米级结构。X射线衍射,透射电子显微镜和原子探针断层扫描数据显示,fcc Ca相溶解的大水平的塑性形变,主要导致沿晶体缺陷的Ca偏析。所得的显微硬度约300 HV是远远高于基于霍尔和佩奇定律的预测,并归因于有限的晶界介导的塑性,由于钙偏析。电阻率也比纳米结构Al的预期电阻率高得多。主要贡献来自Ca偏析,其导致被晶界反射或捕获的电子的分数比纯Al大两倍。在200{ \textdegree }C退火30 min后,通过原位和非原位显微镜研究两相状态,其中发生纳米级Al 4Ca颗粒的沉淀,并且平均晶粒尺寸达到35 nm。退火也显着降低电阻率,但它仍然比纳米结构的纯铝高得多,由于铝/铝4Ca界面,反射或陷阱超过85%的电子。

英文摘要:

Achieving a combination of high mechanical strength and high electrical conductivity in low-weight Al alloys requires a full understanding of the relationships between nanoscaled features and physical properties. Grain boundary strengthening through grain size reduction offers some interesting possibilities but is limited by thermal stability issues. Zener pinning by stable nanoscaled particles or grain boundary segregation are well-known strategies for stabilizing grain boundaries. In this study, the Al-Ca system has been selected to investigate the way segregation affects the combination of mechanical strength and electrical resistivity. For this purpose, an Al-Ca composite material was severely deformed by high-pressure torsion to achieve a nanoscaled structure with a mean grain size of only 25 nm. X-ray diffraction, transmission electron microscopy and atom probe tomography data revealed that the fcc Ca phase was dissolved for large levels of plastic deformation leading mainly to Ca segregations along crystalline defects. The resulting microhardness of about 300 HV is much higher than predictions based on Hall and Petch Law and is attributed to limited grain boundary mediated plasticity due to Ca segregation. The electrical resistivity is also much higher than that expected for nanostructured Al. The main contribution comes from Ca segregations that lead to a fraction of electrons reflected or trapped by grain boundaries twice larger than in pure Al. The two-phase state was investigated by in-situ and ex-situ microscopy after annealing at 200{\textdegree}C for 30 min, where precipitation of nanoscaled Al4Ca particles occurred and the mean grain size reached 35 nm. Annealing also significantly decreased electrical resistivity, but it remained much higher than that of nanostructured pure Al, due to Al/Al4Ca interfaces that reflect or trap more than 85% of electrons.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑