The task of room layout estimation is to locate the wall-floor, wall-ceiling, and wall-wall boundaries. Most recent methods solve this problem based on edge/keypoint detection or semantic segmentation. However, these approaches have shown limited attention on the geometry of the dominant planes and the intersection between them, which has significant impact on room layout. In this work, we propose to incorporate geometric reasoning to deep learning for layout estimation. Our approach learns to infer the depth maps of the dominant planes in the scene by predicting the pixel-level surface parameters, and the layout can be generated by the intersection of the depth maps. Moreover, we present a new dataset with pixel-level depth annotation of dominant planes. It is larger than the existing datasets and contains both cuboid and non-cuboid rooms. Experimental results show that our approach produces considerable performance gains on both 2D and 3D datasets.
This paper focuses on the task of room layout estimation from a monocular RGB image. Prior works break the problem into two sub-tasks: semantic segmentation of floor, walls, ceiling to produce layout hypotheses, followed by an iterative optimization step to rank these hypotheses. In contrast, we adopt a more direct formulation of this problem as one of estimating an ordered set of room layout keypoints. The room layout and the corresponding segmentation is completely specified given the locations of these ordered keypoints. We predict the locations of the room layout keypoints using RoomNet, a…
Graz University of Technology（格拉茨工业大学）；University of Bordeaux（波尔多大学）
We propose a novel method to efficiently estimate the spatial layout of a room from a single monocular RGB image. As existing approaches based on low-level feature extraction, followed by a vanishing point estimation are very slow and often unreliable in realistic scenarios, we build on semantic segmentation of the input image. To obtain better segmentations, we introduce a robust, accurate and very efficient hypothesize-and-test scheme. The key idea is to use three segmentation hypotheses, each based on a different number of visible walls. For each hypothesis, we predict the image locations o…
Rakuten Institute of Technology（乐天技术研究所）；Facebook（脸书）
This paper presents a method of estimating the geometry of a room and the 3D pose of objects from a single 360-degree panorama image. Assuming Manhattan World geometry, we formulate the task as a Bayesian inference problem in which we estimate positions and orientations of walls and objects. The method combines surface normal estimation, 2D object detection and 3D object pose estimation. Quantitative results are presented on a dataset of synthetically generated 3D rooms containing objects, as well as on a subset of hand-labeled images from the public SUN360 dataset.
We address the problem of detecting and erasing furniture from a wide angle photograph of a room. Inpainting large regions of an indoor scene often results in geometric inconsistencies of background elements within the inpaint mask. To address this problem, we utilize perceptual information (e.g. instance segmentation, and room layout) to produce a geometrically consistent empty version of a room. We share important details to make this system viable, such as per-plane inpainting, automatic rectification, and texture refinement. We provide detailed ablation along with qualitative examples, jus…
Bournemouth University（伯恩茅斯大学）；The Chinese University of Hong Kong, Shenzhen（香港中文大学（深圳））；Shenzhen Research Institute of Big Data（深圳大数据研究院）；Xiamen University（厦门大学）
Semantic reconstruction of indoor scenes refers to both scene understanding and object reconstruction. Existing works either address one part of this problem or focus on independent objects. In this paper, we bridge the gap between understanding and reconstruction, and propose an end-to-end solution to jointly reconstruct room layout, object bounding boxes and meshes from a single image. Instead of separately resolving scene understanding and object reconstruction, our method builds upon a holistic scene context and proposes a coarse-to-fine hierarchy with three components: 1. room layout with…
University of Illinois at Urbana-Champaign（伊利诺伊大学厄巴纳-香槟分校）；National Tsing Hua University（国立清华大学）；National Chiao Tung University（国立交通大学）；ShanghaiTech University（上海科技大学）；University of Washington（华盛顿大学）；Apple Inc.（苹果公司）；King Abdullah University of Science and Technology（阿卜杜拉国王科技大学）
Recent approaches for predicting layouts from 360 panoramas produce excellent results. These approaches build on a common framework consisting of three steps: a pre-processing step based on edge-based alignment, prediction of layout elements, and a post-processing step by fitting a 3D layout to the layout elements. Until now, it has been difficult to compare the methods due to multiple different design decisions, such as the encoding network (e.g. SegNet or ResNet), type of elements predicted (e.g. corners, wall/floor boundaries, or semantic segmentation), or method of fitting the 3D layout. T…
Georgia Institute of Technology（佐治亚理工学院）；University of California, Irvine（加州大学欧文分校）
We develop new representations and algorithms for three-dimensional (3D) object detection and spatial layout prediction in cluttered indoor scenes. We first propose a clouds of oriented gradient (COG) descriptor that links the 2D appearance and 3D pose of object categories, and thus accurately models how perspective projection affects perceived image gradients. To better represent the 3D visual styles of large objects and provide contextual cues to improve the detection of small objects, we introduce latent support surfaces. We then propose a "Manhattan voxel" representation which better captu…
In this paper, we present a new approach to estimate the layout of a room from its single image. While recent approaches for this task use robust features learnt from data, they resort to optimization for detecting the final layout. In addition to using learnt robust features, our approach learns an additional ranking function to estimate the final layout instead of using optimization. To learn this ranking function, we propose a framework to train a CNN using max-margin structure cost. Also, while most approaches aim at detecting cuboidal layouts, our approach detects non-cuboidal layouts for…
This paper proposes a new approach, Flat2Layout, for estimating general indoor room layout from a single-view RGB image whereas existing methods can only produce layout topologies captured from the box-shaped room. The proposed flat representation encodes the layout information into row vectors which are treated as the training target of the deep model. A dynamic programming based postprocessing is employed to decode the estimated flat output from the deep model into the final room layout. Flat2Layout achieves state-of-the-art performance on existing room layout benchmark. This paper also cons…
This paper presents an algorithm for indoor layout estimation and reconstruction through the fusion of a sequence of captured images and LiDAR data sets. In the proposed system, a movable platform collects both intensity images and 2D LiDAR information. Pose estimation and semantic segmentation is computed jointly by aligning the LiDAR points to line segments from the images. For indoor scenes with walls orthogonal to floor, the alignment problem is decoupled into top-down view projection and a 2D similarity transformation estimation and solved by the recursive random sample consensus (R-RANSA…
National Tsing Hua University（国立清华大学）；KAUST（沙特阿拉伯国王科技大学）
We present a deep learning framework, called DuLa-Net, to predict Manhattan-world 3D room layouts from a single RGB panorama. To achieve better prediction accuracy, our method leverages two projections of the panorama at once, namely the equirectangular panorama-view and the perspective ceiling-view, that each contains different clues about the room layouts. Our network architecture consists of two encoder-decoder branches for analyzing each of the two views. In addition, a novel feature fusion structure is proposed to connect the two branches, which are then jointly trained to predict the 2D …
Ctrl-Room: Controllable Text-to-3D Room Meshes Generation with Layout Constraints
Hong Kong University of Science and Technology（香港理工大学）；LightIllusion, China（中国LightIllusion公司）；Alibaba Group（阿里巴巴集团）；Simon Fraser University, Canada（加拿大Simon Fraser大学）
We present a new approach to the problem of estimating the 3D room layout from a single panoramic image. We represent room layout as three 1D vectors that encode, at each image column, the boundary positions of floor-wall and ceiling-wall, and the existence of wall-wall boundary. The proposed network, HorizonNet, trained for predicting 1D layout, outperforms previous state-of-the-art approaches. The designed post-processing procedure for recovering 3D room layouts from 1D predictions can automatically infer the room shape with low computation cost - it takes less than 20ms for a panorama image…
In this paper, we propose PanoViT, a panorama vision transformer to estimate the room layout from a single panoramic image. Compared to CNN models, our PanoViT is more proficient in learning global information from the panoramic image for the estimation of complex room layouts. Considering the difference between a perspective image and an equirectangular image, we design a novel recurrent position embedding and a patch sampling method for the processing of panoramic images. In addition to extracting global information, PanoViT also includes a frequency-domain edge enhancement module and a 3D l…
University of Electronic Science and Technology of China（电子科技大学）；Hikvision Research Institute（海康威视研究院）；Manycore Tech Inc. (Kujiale)（摩芯科技有限公司（酷家乐））；University of California, Berkeley（加利福尼亚大学伯克利分校）
Single-image room layout reconstruction aims to reconstruct the enclosed 3D structure of a room from a single image. Most previous work relies on the cuboid-shape prior. This paper considers a more general indoor assumption, i.e., the room layout consists of a single ceiling, a single floor, and several vertical walls. To this end, we first employ Convolutional Neural Networks to detect planes and vertical lines between adjacent walls. Meanwhile, estimating the 3D parameters for each plane. Then, a simple yet effective geometric reasoning method is adopted to achieve room layout reconstruction…
East China Normal University（华东师范大学）；Yiwo Technology（易沃科技）
3D room layout estimation by a single panorama using deep neural networks has made great progress. However, previous approaches can not obtain efficient geometry awareness of room layout with the only latitude of boundaries or horizon-depth. We present that using horizon-depth along with room height can obtain omnidirectional-geometry awareness of room layout in both horizontal and vertical directions. In addition, we propose a planar-geometry aware loss function with normals and gradients of normals to supervise the planeness of walls and turning of corners. We propose an efficient network, L…
We propose a method for room layout estimation that does not rely on the typical box approximation or Manhattan world assumption. Instead, we reformulate the geometry inference problem as an instance detection task, which we solve by directly regressing 3D planes using an R-CNN. We then use a variant of probabilistic clustering to combine the 3D planes regressed at each frame in a video sequence, with their respective camera poses, into a single global 3D room layout estimate. Finally, we showcase results which make no assumptions about perpendicular alignment, so can deal effectively with wal…
Zillow Group（Zillow集团）；The City College of New York（纽约城市学院）
In this paper, we propose a new deep learning-based method for estimating room layout given a pair of 360 panoramas. Our system, called Position-aware Stereo Merging Network or PSMNet, is an end-to-end joint layout-pose estimator. PSMNet consists of a Stereo Pano Pose (SP2) transformer and a novel Cross-Perspective Projection (CP2) layer. The stereo-view SP2 transformer is used to implicitly infer correspondences between views, and can handle noisy poses. The pose-aware CP2 layer is designed to render features from the adjacent view to the anchor (reference) view, in order to perform view fusi…
We present the first self-supervised method to train panoramic room layout estimation models without any labeled data. Unlike per-pixel dense depth that provides abundant correspondence constraints, layout representation is sparse and topological, hindering the use of self-supervised reprojection consistency on images. To address this issue, we propose Differentiable Layout View Rendering, which can warp a source image to the target camera pose given the estimated layout from the target image. As each rendered pixel is differentiable with respect to the estimated layout, we can now train the l…
We study the problem of estimating room layouts from a single panorama image. Most former works have two stages: feature extraction and parametric model fitting. Here we propose an end-to-end method that directly predicts parametric layouts from an input panorama image. It exploits an implicit encoding procedure that embeds parametric layouts into a latent space. Then learning a mapping from images to this latent space makes end-to-end room layout estimation possible. However end-to-end methods have several notorious drawbacks despite many intriguing properties. A widely raised criticism is th…
Institute for Computer Graphics and Vision, Graz University of Technology（格拉茨技术大学计算机图形与视觉研究所）；Université Paris-Est, École des Ponts ParisTech（巴黎东大学，巴黎高科路桥学院）
We present a novel method to reconstruct the 3D layout of a room (walls, floors, ceilings) from a single perspective view in challenging conditions, by contrast with previous single-view methods restricted to cuboid-shaped layouts. This input view can consist of a color image only, but considering a depth map results in a more accurate reconstruction. Our approach is formalized as solving a constrained discrete optimization problem to find the set of 3D polygons that constitute the layout. In order to deal with occlusions between components of the layout, which is a problem ignored by previous…
We present a structured graph variational autoencoder for generating the layout of indoor 3D scenes. Given the room type (e.g., living room or library) and the room layout (e.g., room elements such as floor and walls), our architecture generates a collection of objects (e.g., furniture items such as sofa, table and chairs) that is consistent with the room type and layout. This is a challenging problem because the generated scene should satisfy multiple constrains, e.g., each object must lie inside the room and two objects cannot occupy the same volume. To address these challenges, we propose a…
University of Illinois at Urbana-Champaign（伊利诺伊大学厄巴纳-香槟分校）；Zillow Group（齐洛集团）
We propose an algorithm to predict room layout from a single image that generalizes across panoramas and perspective images, cuboid layouts and more general layouts (e.g. L-shape room). Our method operates directly on the panoramic image, rather than decomposing into perspective images as do recent works. Our network architecture is similar to that of RoomNet, but we show improvements due to aligning the image based on vanishing points, predicting multiple layout elements (corners, boundaries, size and translation), and fitting a constrained Manhattan layout to the resulting predictions. Our m…
Prim2Room: Layout-Controllable Room Mesh Generation from Primitives
Nanyang Technological University（南洋理工大学）；Tencent XR Vision Labs（腾讯XR视觉实验室）；Institute for Infocomm Research A*STAR（新加坡资讯通信研究院（新加坡科技研究局下属））；Australia National University（澳大利亚国立大学）
MINDsLab, Inc.（MINDsLab 公司）；Seoul National University（首尔大学）
Predicting 3D room layout from single image is a challenging task with many applications. In this paper, we propose a new training and post-processing method for 3D room layout estimation, built on a recent state-of-the-art 3D room layout estimation model. Experimental results show our method outperforms state-of-the-art approaches by a large margin in predicting visible room layout. Our method has obtained the 3rd place in 2020 Holistic Scene Structures for 3D Vision Workshop.
Alibaba Group（阿里巴巴集团）；Institute of Computing Technology, Chinese Academy of Sciences（中国科学院计算技术研究所）；School of Computing Science, Simon Fraser University（西蒙菲莎大学计算科学学院）
We introduce 3D-FRONT (3D Furnished Rooms with layOuts and semaNTics), a new, large-scale, and comprehensive repository of synthetic indoor scenes highlighted by professionally designed layouts and a large number of rooms populated by high-quality textured 3D models with style compatibility. From layout semantics down to texture details of individual objects, our dataset is freely available to the academic community and beyond. Currently, 3D-FRONT contains 18,968 rooms diversely furnished by 3D objects, far surpassing all publicly available scene datasets. In addition, the 13,151 furniture obj…
National Tsing Hua University（台湾清华大学）；Phiar Technologies（Phiar科技公司）
We present 360-DFPE, a sequential floor plan estimation method that directly takes 360-images as input without relying on active sensors or 3D information. Our approach leverages a loosely coupled integration between a monocular visual SLAM solution and a monocular 360-room layout approach, which estimate camera poses and layout geometries, respectively. Since our task is to sequentially capture the floor plan using monocular images, the entire scene structure, room instances, and room shapes are unknown. To tackle these challenges, we first handle the scale difference between visual odometry …
In this paper, we propose an alternative method to estimate room layouts of cluttered indoor scenes. This method enjoys the benefits of two novel techniques. The first one is semantic transfer (ST), which is: (1) a formulation to integrate the relationship between scene clutter and room layout into convolutional neural networks; (2) an architecture that can be end-to-end trained; (3) a practical strategy to initialize weights for very deep networks under unbalanced training data distribution. ST allows us to extract highly robust features under various circumstances, and in order to address th…
Given a single RGB panorama, the goal of 3D layout reconstruction is to estimate the room layout by predicting the corners, floor boundary, and ceiling boundary. A common approach has been to use standard convolutional networks to predict the corners and boundaries, followed by post-processing to generate the 3D layout. However, the space-varying distortions in panoramic images are not compatible with the translational equivariance property of standard convolutions, thus degrading performance. Instead, we propose to use spherical convolutions. The resulting network, which we call OmniLayout pe…
Significant geometric structures can be compactly described by global wireframes in the estimation of 3D room layout from a single panoramic image. Based on this observation, we present an alternative approach to estimate the walls in 3D space by modeling long-range geometric patterns in a learnable Hough Transform block. We transform the image feature from a cubemap tile to the Hough space of a Manhattan world and directly map the feature to the geometric output. The convolutional layers not only learn the local gradient-like line features, but also utilize the global information to successfu…
Tsinghua University（清华大学）；Institute for AI Industry Research (AIR), Tsinghua University（清华大学人工智能产业研究院（AIR））；Peking University（北京大学）；Intel Labs（英特尔实验室）
Room layout estimation is a long-existing robotic vision task that benefits both environment sensing and motion planning. However, layout estimation using point clouds (PCs) still suffers from data scarcity due to annotation difficulty. As such, we address the semi-supervised setting of this task based upon the idea of model exponential moving averaging. But adapting this scheme to the state-of-the-art (SOTA) solution for PC-based layout estimation is not straightforward. To this end, we define a quad set matching strategy and several consistency losses based upon metrics tailored for layout q…
GRE-Diff: Gaussian Room Embeddings for Structured Layout Diffusion
Guangdong Provincial Key Laboratory of Visual Media and Multidimensional Intelligence, CSSE, Shenzhen University（广东省视觉媒体与多维智能重点实验室，计算机科学与软件学院，深圳大学）；School of Computer Science, University of Guelph（圭尔夫大学计算机科学学院）
Technique Center Ihome Corporation（艾佳家居技术中心）；IBM Research（IBM研究院）
In this paper, we propose an adversarial model for producing furniture layout for interior scene synthesis when the interior room is rotated. The proposed model combines a conditional adversarial network, a rotation module, a mode module, and a rotation discriminator module. As compared with the prior work on scene synthesis, our proposed three modules enhance the ability of auto-layout generation and reduce the mode collapse during the rotation of the interior room. We conduct our experiments on a proposed real-world interior layout dataset that contains 14400 designs from the professional de…
National Tsing Hua University（清华大学）；National Chiao Tung University（交通大学）；NEC Labs America（美国NEC实验室）
Although significant progress has been made in room layout estimation, most methods aim to reduce the loss in the 2D pixel coordinate rather than exploiting the room structure in the 3D space. Towards reconstructing the room layout in 3D, we formulate the task of 360 layout estimation as a problem of predicting depth on the horizon line of a panorama. Specifically, we propose the Differentiable Depth Rendering procedure to make the conversion from layout to depth prediction differentiable, thus making our proposed model end-to-end trainable while leveraging the 3D geometric information, withou…
Beijing Key Laboratory of Advanced Information Science and Network Technology（北京先进信息科学与网络技术重点实验室）
Based on the Manhattan World assumption, most existing indoor layout estimation schemes focus on recovering layouts from vertically compressed 1D sequences. However, the compression procedure confuses the semantics of different planes, yielding inferior performance with ambiguous interpretability. To address this issue, we propose to disentangle this 1D representation by pre-segmenting orthogonal (vertical and horizontal) planes from a complex scene, explicitly capturing the geometric cues for indoor layout estimation. Considering the symmetry between the floor boundary and ceiling boundary, w…
Instituto de Investigación en Ingeniería de Aragón (I3A)（阿拉贡工程研究所（I3A））；Universidad de Zaragoza（萨拉戈萨大学）
In this paper, we propose a novel procedure for 3D layout recovery of indoor scenes from single 360 degrees panoramic images. With such images, all scene is seen at once, allowing to recover closed geometries. Our method combines strategically the accuracy provided by geometric reasoning (lines and vanishing points) with the higher level of data abstraction and pattern recognition achieved by deep learning techniques (edge and normal maps). Thus, we extract structural corners from which we generate layout hypotheses of the room assuming Manhattan world. The best layout model is selected, achie…
IHome Company（IHome公司）；IBM Research Singapore（IBM新加坡研究院）；Radio Company（Radio公司）；Huazhong University of Science and Technology（华中科技大学）；Tongji University（同济大学）
In this paper, we propose an end-end model for producing furniture layout for interior scene synthesis from the random vector. This proposed model is aimed to support professional interior designers to produce the interior decoration solutions more quickly. The proposed model combines a conditional floor-plan module of the room, a conditional graphical floor-plan module of the room and a conditional layout module. As compared with the prior work on scene synthesis, our proposed three modules enhance the ability of auto-layout generation given the dimensional category of the room. We conduct ou…
PanoTPS-Net: Panoramic Room Layout Estimation via Thin Plate Spline Transformation
Department of Computer Science, Toronto Metropolitan University（计算机科学系，多伦多 Metropolitan 大学）；Department of Electrical Engineering, Faculty of Engineering, Assiut University（电气工程系，工程学院，阿西乌特大学）
Institute for AI Industry Research (AIR), Tsinghua University（清华大学智能产业研究院）；Intel Labs China（英特尔中国研究院）；Peking University（北京大学）
3D scene understanding from point clouds plays a vital role for various robotic applications. Unfortunately, current state-of-the-art methods use separate neural networks for different tasks like object detection or room layout estimation. Such a scheme has two limitations: 1) Storing and running several networks for different tasks are expensive for typical robotic platforms. 2) The intrinsic structure of separate outputs are ignored and potentially violated. To this end, we propose the first transformer architecture that predicts 3D objects and layouts simultaneously, using point cloud input…
Centre for Research and Technology Hellas（希腊研究与技术中心）；Universidad Politécnica de Madrid（马德里理工大学）
Spherical cameras capture scenes in a holistic manner and have been used for room layout estimation. Recently, with the availability of appropriate datasets, there has also been progress in depth estimation from a single omnidirectional image. While these two tasks are complementary, few works have been able to explore them in parallel to advance indoor geometric perception, and those that have done so either relied on synthetic data, or used small scale datasets, as few options are available that include both layout annotations and dense depth maps in real scenes. This is partly due to the ne…
The task of estimating the spatial layout of cluttered indoor scenes from a single RGB image is addressed in this work. Existing solutions to this problems largely rely on hand-craft features and vanishing lines, and they often fail in highly cluttered indoor rooms. The proposed coarse-to-fine indoor layout estimation (CFILE) method consists of two stages: 1) coarse layout estimation; and 2) fine layout localization. In the first stage, we adopt a fully convolutional neural network (FCN) to obtain a coarse-scale room layout estimate that is close to the ground truth globally. The proposed FCN …
Reconstruction of indoor surfaces with limited texture information or with repeated textures, a situation common in walls and ceilings, may be difficult with a monocular Structure from Motion system. We propose a Semantic Room Wireframe Detection task to predict a Semantic Wireframe from a single perspective image. Such predictions may be used with shape priors to estimate the Room Layout and aid reconstruction. To train and test the proposed algorithm we create a new set of annotations from the simulated Structured3D dataset. We show qualitatively that the SRW-Net handles complex room geometr…
Imperial College London（帝国理工学院）；OMRON Corporation（欧姆龙公司）
In this paper, we tackle the problem of 24 hours-monitoring patient actions in a ward such as "stretching an arm out of the bed", "falling out of the bed", where temporal movements are subtle or significant. In the concerned scenarios, the relations between scene layouts and body kinematics (skeletons) become important cues to recognize actions; however they are hard to be secured at a testing stage. To address this problem, we propose a kinematic-layout-aware random forest which takes into account the kinematic-layout (\ie layout and skeletons), to maximize the discriminative power of depth i…
University of Chinese Academy of Sciences（中国科学院大学）；Chongqing University（重庆大学）
Limited by the computational efficiency and accuracy, generating complex 3D scenes remains a challenging problem for existing generation networks. In this work, we propose DepthGAN, a novel method of generating depth maps with only semantic layouts as input. First, we introduce a well-designed cascade of transformer blocks as our generator to capture the structural correlations in depth maps, which makes a balance between global feature aggregation and local attention. Meanwhile, we propose a cross-attention fusion module to guide edge preservation efficiently in depth generation, which exploi…
