Data-driven fault diagnosis is complicated by unknown fault classes and limited training data from different fault realizations. In these situations, conventional multi-class classification approaches are not suitable for fault diagnosis. One solution is the use of anomaly classifiers that are trained using only nominal data. Anomaly classifiers can be used to detect when a fault occurs but give little information about its root cause. Hybrid fault diagnosis methods combining physically-based models and available training data have shown promising results to improve fault classification performance and identify unknown fault classes. Residual generation using grey-box recurrent neural networks can be used for anomaly classification where physical insights about the monitored system are incorporated into the design of the machine learning algorithm. In this work, an automated residual design is developed using a bipartite graph representation of the system model to design grey-box recurrent neural networks and evaluated using a real industrial case study. Data from an internal combustion engine test bench is used to illustrate the potentials of combining machine learning and model-based fault diagnosis techniques.
Fault diagnosis of dynamic systems is done by detecting changes in time-series data, for example residuals, caused by system degradation and faulty components. The use of general-purpose multi-class classification methods for fault diagnosis is complicated by imbalanced training data and unknown fault classes. Another complicating factor is that different fault classes can result in similar residual outputs, especially for small faults, which causes classification ambiguities. In this work, a framework for data-driven analysis and open-set classification is developed for fault diagnosis applic…
Recent trends focusing on Industry 4.0 concept and smart manufacturing arise a data-driven fault diagnosis as key topic in condition-based maintenance. Fault diagnosis is considered as an essential task in rotary machinery since possibility of an early detection and diagnosis of the faulty condition can save both time and money. Traditional data-driven techniques of fault diagnosis require signal processing for feature extraction, as they are unable to work with raw signal data, consequently leading to need for expert knowledge and human work. The emergence of deep learning architectures in co…
In this study, the open-circuit faults diagnosis and location issue of the neutral-point-clamped (NPC) inverters are analysed. A novel fault diagnosis approach based on knowledge driven and data driven was presented for the open-circuit faults in insulated-gate bipolar transistors (IGBTs) of NPC inverter, and Concordia transform (knowledge driven) and random forests (RFs) technique (data driven) are employed to improve the robustness performance of the fault diagnosis classifier. First, the fault feature data of AC in either normal state or open-circuit faults states of NPC inverter are analys…
A novel multitask learning approach based on stacked bidirectional long short-term memory (BiLSTM) networks and convolutional neural networks (CNN) for detecting, locating, characterizing, and identifying fiber faults is proposed. It outperforms conventionally employed techniques.
In the Engineering discipline, predictive maintenance techniques play an essential role in improving system safety and reliability of industrial machines. Due to the adoption of crucial and emerging detection techniques and big data analytics tools, data fusion approaches are gaining popularity. This article thoroughly reviews the recent progress of data fusion techniques in predictive maintenance, focusing on their applications in machinery fault diagnosis. In this review, the primary objective is to classify existing literature and to report the latest research and directions to help researc…
Huazhong University of Science and Technology（华中科技大学）；State Key Lab of Digital Manufacturing Equipment and Technology（数字制造装备与技术国家重点实验室）
The demand of artificial intelligent adoption for condition-based maintenance strategy is astonishingly increased over the past few years. Intelligent fault diagnosis is one critical topic of maintenance solution for mechanical systems. Deep learning models, such as convolutional neural networks (CNNs), have been successfully applied to fault diagnosis tasks for mechanical systems and achieved promising results. However, for diverse working conditions in the industry, deep learning suffers two difficulties: one is that the well-defined (source domain) and new (target domain) datasets are with …
Data-driven fault diagnosis methods often require abundant labeled examples for each fault type. On the contrary, real-world data is often unlabeled and consists of mostly healthy observations and only few samples of faulty conditions. The lack of labels and fault samples imposes a significant challenge for existing data-driven fault diagnosis methods. In this paper, we aim to overcome this limitation by integrating expert knowledge with domain adaptation in a synthetic-to-real framework for unsupervised fault diagnosis. Motivated by the fact that domain experts often have a relatively good un…
A three-phase pulse-width modulation (PWM) rectifier can usually maintain operation when open-circuit faults occur in insulated-gate bipolar transistors (IGBTs), which will lead the system to be unstable and unsafe. Aiming at this problem, based on random forests with transient synthetic features, a data-driven online fault diagnosis method is proposed to locate the open-circuit faults of IGBTs timely and effectively in this study. Firstly, by analysing the open-circuit fault features of IGBTs in the three-phase PWM rectifier, it is found that the occurrence of the fault features is related to…
Today, interest in automotive applications notably Hybrid Electric Vehicles (HEV) has risen due to environmental concerns and the modern society's energetic dependence. Consequently, it is necessary to study and implement in these vehicle fault diagnosis systems which allow them to be more reliable and safe enhancing its sustainability. Several research works have been focused on Fault Diagnosis approaches for electric machines due to it's influence in the automotive system availability. Our work fits into this context, firstly with a review of faults and diagnosis methods of the permanent mag…
Northeast Electric Power University（东北电力大学）；Technical University of Denmark（丹麦技术大学）
A fault diagnosis method for power electronics converters based on deep feedforward network and wavelet compression is proposed in this paper. The transient historical data after wavelet compression are used to realize the training of fault diagnosis classifier. Firstly, the correlation analysis of the voltage or current data running in various fault states is performed to remove the redundant features and the sampling point. Secondly, the wavelet transform is used to remove the redundant data of the features, and then the training sample data is greatly compressed. The deep feedforward networ…
Fault diagnostics and prognostics are important topics both in practice and research. There is an intense pressure on industrial plants to continue reducing unscheduled downtime, performance degradation, and safety hazards, which requires detecting and recovering potential faults in its early stages. Intelligent fault diagnosis is a promising tool due to its ability to rapidly and efficiently processing collected signals and providing accurate diagnosis results. Although many studies have developed machine leaning (M.L) and deep learning (D.L) algorithms for detecting the bearing fault, the re…
Bangladesh University of Engineering and Technology（孟加拉国工程技术大学）
An intrinsic time-scale decomposition (ITD) based method for power transformer fault diagnosis is proposed. Dissolved gas analysis (DGA) parameters are ranked according to their skewness, and then ITD based features extraction is performed. An optimal set of PRC features are determined by an XGBoost classifier. For classification purpose, an XGBoost classifier is used to the optimal PRC features set. The proposed method's performance in classification is studied using publicly available DGA data of 376 power transformers and employing an XGBoost classifier. The Proposed method achieves more th…
In-flight sensor fault diagnosis and recursive combination of residual signals via the Dempster-Shafer (DS) theory have been considered in this study. In particular, a novel evidence-based combination rule of residual errors as a function of a reliability measure derived from streaming data is proposed for the purpose of online robust sensors fault diagnosis. The proposed information fusion mechanism is divided into three steps. In the first step, the classic DS probability mass combination rule is applied; then, the difference between the previous posterior mass and the current prior mass ass…
Bearing failure is the most common failure mode in rotating machinery and can result in large financial losses or even casualties. However, complex structures around bearing and actual variable working conditions can lead to large distribution difference of vibration signal between a training set and a test set, which causes the accuracy-dropping problem of fault diagnosis. Thus, how to improve efficiently the performance of bearing fault diagnosis under different working conditions is always a primary challenge. In this paper, a novel bearing fault diagnosis under different working conditions…
In this paper PCA and D-PCA techniques are applied for the design of a Data Driven diagnostic Fault Isolation (FI) and Fault Estimation (FE) scheme for 18 primary sensors of a semi-autonomous aircraft. Specifically, Contributions-based, and Reconstruction-based Contributions approaches have been considered. To improve FI performance an inference mechanism derived from evidence-based decision making theory has been proposed. A detailed FI and FE study is presented for the True Airspeed sensor based on experimental data. Evidence Based Filtering (EBF) showed to be very effective particularly in …
ADVA Optical Networking SE（ADVA光网络公司）；Christian-Albrechts-Universität zu Kiel（基尔大学）
We propose a deep learning approach based on an autoencoder for identifying and localizing fiber faults in passive optical networks. The experimental results show that the proposed method detects faults with 97% accuracy, pinpoints them with an RMSE of 0.18 m and outperforms conventional techniques.
Northeast Electric Power University（东北电力大学）；Technical University of Denmark（丹麦技术大学）
Three-phase PWM rectifiers are adopted extensively in industry because of their excellent properties and potential advantages. However, while the IGBT has an open-circuit fault, the system does not crash suddenly, the performance will be reduced for instance voltages fluctuation and current harmonics. A fault diagnosis method based on deep feedforward network with transient synthetic features is proposed to reduce the dependence on the fault mathematical models in this paper, which mainly uses the transient phase current to train the deep feedforward network classifier. Firstly, the features o…
The Intelligent Fault Diagnosis of rotating machinery currently proposes some captivating challenges. Although results achieved by artificial intelligence and deep learning constantly improve, this field is characterized by several open issues. Models' interpretation is still buried under the foundations of data driven science, thus requiring attention to the development of new opportunities also for machine learning theories. This study proposes a machine learning diagnosis model, based on intelligent spectrogram recognition, via image processing. The approach is characterized by the employme…
Fault Diagnosis and Quantification for Photovoltaic Arrays based on Differentiable Physical Models
College of Mechanical and Electrical Engineering, Hohai University（河海大学机械与电子工程学院）；Concordia Institute for Information Systems Engineering, Concordia University（康科德大学信息系统工程研究所）；AAU Energy, Aalborg University（奥胡斯大学能源研究所）
Obuda University（欧布达大学）；Kalman Kando Faculty of Electrical Engineering（卡尔曼·坎多电气工程学院）；Institute of Automation（自动化研究所）
Primary importance is devoted to Fault Detection and Diagnosis (FDI) of electrical machine and drive systems in modern industrial automation. The widespread use of Machine Learning techniques has made it possible to replace traditional motor fault detection techniques with more efficient solutions that are capable of early fault recognition by using large amounts of sensory data. However, the detection of concurrent failures is still a challenge in the presence of disturbing noises or when the multiple faults cause overlapping features. The contribution of this work is to propose a novel metho…
Institute of Oceanographic Instrumentation, Qilu University of Technology (Shandong Academy of Sciences)（齐鲁工业大学（山东省科学院）海洋仪器仪表研究所）；Northeast Electric Power University（东北电力大学）；Changchun Institute of Technology（长春工程学院）；China Merchants Bank（招商银行）
Three-phase PWM voltage-source rectifier (VSR) systems have been widely used in various energy conversion systems, where current sensors are the key component for state monitoring and system control. The current sensor faults may bring hidden danger or damage to the whole system; therefore, this paper proposed a random forest (RF) and current fault texture feature-based method for current sensor fault diagnosis in three-phase PWM VSR systems. First, the three-phase alternating currents (ACs) of the three-phase PWM VSR are collected to extract the current fault texture features, and no addition…
This paper is concerned with the fault diagnosis problem for general linear heterodirectional hyperbolic ODE-PDE systems. A systematic solution is presented for additive time-varying actuator, process and sensor faults in the presence of disturbances. The faults and disturbances are represented by the solutions of finite-dimensional signal models, which allow to take a large class of signals into account. For disturbances, that are only bounded, a threshold for secured fault diagnosis is derived. By applying integral transformations to the system an algebraic fault detection equation to detect…
This paper presents a non-contact fault diagnostic method for ball bearing using adaptive wavelet denoising, statistical-spectral acoustic features, and one-dimensional (1D) convolutional neural networks (CNN). The health conditions of the ball bearing are monitored by microphone under noisy conditions. To eliminate noise, adaptive wavelet denoising method based on kurtosis-entropy (KE) index is proposed. Multiple acoustic features are extracted base on expert knowledge. The 1D ResNet is used to classify the health conditions of the bearings. Case study is presented to examine the proposed met…
National Space Science Center.CAS（中国科学院国家空间科学中心）；University of Chinese Academy of Sciences（中国科学院大学）；Science and Technology on Complex Aviation System Simulation Laboratory（复杂航空系统仿真科学与技术实验室）
Data-driven methods have made great progress in fault diagnosis, especially deep learning method. Deep learning is suitable for processing big data, and has a strong feature extraction ability to realize end-to-end fault diagnosis systems. However, designing neural network architecture requires rich professional knowledge and debugging experience, and a lot of experiments are needed to screen models and hyperparameters, increasing the difficulty of developing deep learning models. Frortunately, neural architecture search (NAS) is developing rapidly, and is becoming one of the next directions f…
Institute of Technical Education and Research（技术教育与研究学院）；Siksha ’O’ Anusandhan (Deemed to be University)（希克沙奥阿努桑丹大学（被视为大学））
Data gathered from multiple sensors can be effectively fused for accurate monitoring of many engineering applications. In the last few years, one of the most sought after applications for multi sensor fusion has been fault diagnosis. Dempster-Shafer Theory of Evidence along with Dempsters Combination Rule is a very popular method for multi sensor fusion which can be successfully applied to fault diagnosis. But if the information obtained from the different sensors shows high conflict, the classical Dempsters Combination Rule may produce counter-intuitive result. To overcome this shortcoming, t…
Fault diagnosis for PV arrays considering dust impact based on transformed graphical feature of characteristic curves and convolutional neural network with CBAM modules
School of Instrumentation and Optoelectronic Engineering, Beihang University（北京航空航天大学仪器科学与光电工程学院）；School of Electronics and Information Engineering, Beihang University（北京航空航天大学电子信息工程学院）；Department of Electrical and Computer Engineering, University of Calgary（卡尔加里大学电气与计算机工程系）
Dongguk University（东国大学）；University of Nottingham（诺丁汉大学）
In fault detection and diagnosis of prognostics and health management (PHM) systems, most of the methodologies utilize machine learning (ML) or deep learning (DL) through which either some features are extracted beforehand (in the case of ML) or filters are used to extract features autonomously (in case of DL) to perform the critical classification task. Particularly in the fault detection and diagnosis of industrial robots where electric current, vibration or acoustic emissions signals are the primary sources of information, a feature domain that can map the signals into their constituent com…
The scope of data-driven fault diagnosis models is greatly extended through deep learning (DL). However, the classical convolution and recurrent structure have their defects in computational efficiency and feature representation, while the latest Transformer architecture based on attention mechanism has not yet been applied in this field. To solve these problems, we propose a novel time-frequency Transformer (TFT) model inspired by the massive success of vanilla Transformer in sequence processing. Specially, we design a fresh tokenizer and encoder module to extract effective abstractions from …
Shanghai University（上海大学）；University of Hawai‘i at Mānoa（夏威夷大学马诺阿分校）
Bearing fault identification and analysis is an important research area in the field of machinery fault diagnosis. Aiming at the common faults of rolling bearings, we propose a data-driven diagnostic algorithm based on the characteristics of bearing vibrations called multi-size kernel based adaptive convolutional neural network (MSKACNN). Using raw bearing vibration signals as the inputs, MSKACNN provides vibration feature learning and signal classification capabilities to identify and analyze bearing faults. Ball mixing is a ball bearing production quality problem that is difficult to identif…
Unsupervised domain adaptation (UDA) has shown remarkable results in bearing fault diagnosis under changing working conditions in recent years. However, most UDA methods do not consider the geometric structure of the data. Furthermore, the global domain adaptation technique is commonly applied, which ignores the relation between subdomains. This paper addresses mentioned challenges by presenting the novel deep subdomain adaptation graph convolution neural network (DSAGCN), which has two key characteristics: First, graph convolution neural network (GCNN) is employed to model the structure of da…
